Tailoring hierarchical yolk-shelled nickel cobalt sulfide hollow cages with carbon tuning for asymmetric supercapacitors and efficient urea electrocatalysis

Urea biosensors based in zeolites and chalcogenide-oxide semiconductor thin films as active materials: A review

Diagnosis of renal failure by measuring urea levels has been a topic of intense study in recent years. A major focus has been on improving the sensitivity, linearity, precision, accuracy, and selectivity of biosensors for measuring urea. Although various materials have been used in the fabrication of urea biosensors, ceramics, and chalcogenides have been less explored in this field. Recently, the use of ceramics such as zeolite has been investigated to improve enzyme immobilization methods in urea biosensors and their application in ion-selective membranes, to increase the specificity of the devices. While oxides have been widely used as transducers in urea biosensors, chalcogenide semiconductor materials from Group VI of the periodic table also show promising properties, such as chemical stability, to signal transduction capability, and improved electrical measurements. This review provides a comprehensive overview of recent research in urea biosensors, with a special emphasis on the use of ceramics for enzyme immobilization and chalcogenides as transducers and how these materials contribute to improving the performance of these devices.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

A novel sacrificial solvent method to synthesize self-supporting Co9S8/Ni3S2 heterostructure catalyst for efficient oxygen evolution reaction

Synthesizing catalysts for efficient oxygen evolution reaction (OER) with lower cost and simpler design is of significant importance to achieve sustainable hydrogen production. In this work, we propose a novel "sacrificial solvent method" for the first time. Dicobalt octacarbonyl (Co2(CO)8), dimethyl sulfoxide (DMSO), and Ni foam (NF) were used as the raw materials in the solvothermal process. DMSO played the role of both the sacrificial solvent and the sulfur source. Through the self-consumption of DMSO, we finally obtained the Co9S8/Ni3S2 heterostructure supported on the NF (Co9S8/Ni3S2@NF) in one step. The Co9S8/Ni3S2@NF catalyst exhibited excellent OER activity in alkaline environment, with an overpotential of only 264 mV at a current density of 20 mA cm-2, a low Tafel slope of 68.28 mV dec-1 and maintained its current density after 20 h of constant potential testing. This work introduces a new method for synthesizing metal sulfide catalysts using DMSO as a sacrificial solvent. It provides broader opportunities for the development of more efficient and sustainable catalysts for energy conversion and storage.

Insight into the Fe atom-FeS cluster synergistic catalysis mechanism for the oxygen evolution reaction in NiS2-based electrocatalysts

The development of highly active oxygen evolution reaction (OER) catalysts with fast kinetics is crucial for the advancement of clean energy and fuel conversion to achieve a sustainable energy future. Recently, the synergistic effect of single-atom doping and multicomponent clusters has been demonstrated to significantly improve the catalytic activity of materials. However, such synergistic effects involving multi-electron and proton transfer processes are quite complex and many crucial mechanistic details need be well comprehended. We ingeniously propose a catalyst, (Fed-FeSc)@NiS2 (d stands for doping and c stands for clustering), with Fe and FeS acting synergistically on a NiS2 substrate. Specifically, fully dynamic monitoring of multiple active sites at the (Fed-FeSc)@NiS2 interface using metadynamics is innovatively performed. The results show that the rate determining step value at the overpotential of 1.23 V for the synergistic (Fed-FeSc)@NiS2 is 1.55 V, decreased by 6.67% and 35.29% compared to those of the independently acting single-atom doping and multi-clusters. The unique synergistic structure dramatically increases the d-band centre of the Fe site (-1.45 eV), endowing (Fed-FeSc)@NiS2 with more activity than conventional commercial Ir-C catalysts. This study provides insights into the synergistic effects of single-atom doping and multi-component clusters, leading to exploratory inspiration for the design of highly efficient OER catalysts.

Enhancing supercapacitor performance using nanosheet-covered nanotube structures Co3S4/Ni0.96S@CNTs with carbon nanotubes as conductive substrates

Transition metal sulfides have broad application prospects as supercapacitor electrode materials. However, their poor structural stability and conductivity hinder improvements in their electrochemical performance. Therefore, the introduction of highly conductive carbon nanotubes (CNTs) as sulfide growth substrates is considered to improve the microstructure and electrochemical performance of electrode materials. In this study, a highly conductive CNT solution was sprayed onto a nickel foam current collector, and Co3S4/Ni0.96S was successfully constructed on a CNT conductive substrate using a combination of hydrothermal and electrochemical deposition methods, forming a unique nanosheet-covered nanotube structure Co3S4/Ni0.96S@CNTs. The addition of an appropriate concentration of CNTs can not only serve as a substrate for the growth of Co3S4/Ni0.96S, but also effectively maintain the overall nanosheet structure. Thus, the Co3S4/Ni0.96S@CNTs (2-CSNS@CNTs) have a stable structure and a wide range of electrochemical reaction sites, ensuring excellent conductivity and cycling stability. The electrode material 2-CSNS@CNTs exhibited a specific capacity of 1427.05 C g-1 at 1 A g-1. Additionally, the asymmetric supercapacitor 2-CSNS@CNTs exhibited a high energy density of 53.76 W h kg-1 at 800 W kg-1 and a capacity retention rate of 68.5% at 10 A g-1 after 1000 cycles.

Recent Advancements in Chalcogenides for Electrochemical Energy Storage Applications

Energy storage has become increasingly important as a study area in recent decades. A growing number of academics are focusing their attention on developing and researching innovative materials for use in energy storage systems to promote sustainable development goals. This is due to the finite supply of traditional energy sources, such as oil, coal, and natural gas, and escalating regional tensions. Because of these issues, sustainable renewable energy sources have been touted as an alternative to nonrenewable fuels. Deployment of renewable energy sources requires efficient and reliable energy storage devices due to their intermittent nature. High-performance electrochemical energy storage technologies with high power and energy densities are heralded to be the next-generation storage devices. Transition metal chalcogenides (TMCs) have sparked interest among electrode materials because of their intriguing electrochemical properties. Researchers have revealed a variety of modifications to improve their electrochemical performance in energy storage. However, a stronger link between the type of change and the resulting electrochemical performance is still desired. This review examines the synthesis of chalcogenides for electrochemical energy storage devices, their limitations, and the importance of the modification method, followed by a detailed discussion of several modification procedures and how they have helped to improve their electrochemical performance. We also discussed chalcogenides and their composites in batteries and supercapacitors applications. Furthermore, this review discusses the subject’s current challenges as well as potential future opportunities.

Bi-Fe chalcogenides anchored carbon matrix and structured core-shell Bi-Fe-P@Ni-P nanoarchitectures with appealing performances for supercapacitors

Pseudocapacitive materials based on multi-active components are attractive platforms for future portable energy devices due to their excellent redox processes and low cost. In this study, nanostructured bismuth-iron chalcogenide anchored on multiwalled carbon nanotube framework (Bi-Fe chalcogenide/C)-based electrode materials were fabricated via a simple solvothermal protocol with enhanced electrochemical performances. The obtained Bi-Fe chalcogenide/C nanocomposites combining the improved electroconductivity of carbonic frameworks and high pseudocapacitive properties of Bi/Fe reversible redox processes were employed as negative electrodes for asymmetric supercapacitor (ASC) devices. Systematic investigation of the synthesized materials and capacitive performance indicated that the Bi-Fe-P/C electrode simultaneously achieved an intrinsically appreciable specific capacitance of 532 F g^-1 at a current density of 1 A g^-1, high-rate capability, and cyclic stability, profiting from the structural and amorphous merits as well as the collaborative effect of multiple components. Besides, we employed an effective strategy to graft Bi-Fe-P film on a self-standing nickel phosphide (Ni-P) to manufacture a cathode with superior capacitive performances. The as-prepared core-shell Bi-Fe-P@Ni-P was used as a high-performance positive electrode and displayed a large specific capacitance of 230.6 mAh g^-1 at 1 A g^-1. Additionally, we also assembled an ASC system using the core-shell Bi-Fe-P@Ni-P as a positive electrode and amorphous Bi-Fe-P/C as a negative electrode with an expanded operational potential of 1.6 V. The hybrid device delivered a high specific energy density of 81.5 Wh kg^-1 at a power density of 890.2 W kg^-1 together with good cyclic characteristics (85.6% capacitance retention after 8000 consecutive cycles). The obtained findings offer new insights into the design of advanced energy storage materials at relatively low costs and underscore the proficiency of heterostructured multicomponent electrodes as a practical option for enhancing the electrochemical performance of ASC.

Hierarchically urchin-like hollow NiCo2S4 prepared by a facile template-free method for high-performance supercapacitors

Hollow structures draw much attention for high energy density supercapacitors due to their large hollow cavities, high specific surface area, and low interfacial contact resistance. However, constructing hierarchical hollow structures remains a challenge. Herein, we reported a facile template-free method for a novel urchin-like hollow nickel cobalt sulfide (NiCo₂S₄). The hollow interior and urchin exterior remarkably improved the specific capacitance and accommodated structural collapse caused by electrochemical reactions. Owing to these features, the urchin-like hollow NiCo₂S₄ spheres exhibited an impressive capacitance of 1398F g^-1 at 1 A g^-1 and maintained 1110F g^-1 with a large current density of 10 A g^-1. The hybrid supercapacitor fabricated by NiCo₂S₄ and active carbon possesses an energy density of 39.3 Wh kg^-1 at a power density of 749.6 W kg^-1 and an outstanding cycling stability of 74.4% retention after 5000 cycles. Our work presents a facile method of constructing a hollow structure of binary sulfide materials and also makes progress on highly efficient supercapacitors.

Coordination agent-dominated phase control of nickel sulfide for high-performance hybrid supercapacitor

The property of an active material is not only influenced by its morphology and size, but also by its crystal phase. The present phase regulation of nickel sulfide is mainly achieved by controlling the participation of sulfur source in reaction. Thus, new perspectives direct at phase control need to be explored and supplemented. Herein, we proposed a novel coordination agent-dominated phase modulation strategy assisted by a hydrothermal process. It is found that increasing the amount of coordination agent can drove the phase transformation from the initial composite of β-NiS/α-NiS/Ni₃S₄ to β-NiS/α-NiS, and then to pure β-NiS. The mechanism of phase regulation has been proposed, and the general application of this method has been demonstrated. By employing coordination agent, the size of resulted products is reduced, and the morphology is optimized. As a result, all of the pure β-NiS electrodes indicate significantly enhanced specific capacity than the pristine β-NiS/α-NiS/Ni₃S₄ composite. Notably, the sample synthesized with 3 mmol of urea (S11) shows uniform morphology and smallest size, and it gives a highest specific capacity of 223.8 mAh g^-1 at 1 A g^-1, almost 1.5 times of the original sample. The fabricated S11//rGO device delivers a high energy density of 56.6 Wh·kg^-1 at a power density of 407.5 W·kg^-1, and keeps an impressive capacity retention of 84% after 20,000 cycles. This work put forwards a new prospect for controlling the phase and composition of nickel sulfide based on coordination chemistry.

Template-free synthesis of β-NiS ball-in-ball microspheres for a high-performance asymmetrical supercapacitor

While significant advances have been made in the synthesis of core-/multi-shell materials, the synthetic process usually involves a soft/hard template and complicated procedures. In particular, it is extremely difficult to fabricate single-component core-shell structures for nickel sulfides (NSs) with a controlled phase. In this work, we demonstrate a novel facile method to synthesize a single-component β-NiS ball-in-ball microsphere. The ball-in-ball structure is easily obtained by uniquely employing 2-mercaptopropionic acid (2-MPA) as the sulfur source and ethanol as the solvent based on the Ostwald ripening process. In particular, our work demonstrates that the chemical structure of sulfur sources and solvents plays a key role in the formation of the pure β-NiS ball-in-ball structure. When used as an electrode active material, the β-NiS ball-in-ball microspheres exhibit two times stronger specific capacity and three times higher rate performance than NSs produced by a hydrothermal method. The fabricated NS-2//rGO asymmetrical supercapacitor (ASC) displays an energy density of 46.4 W h kg^-1 at a power density of 799.0 W kg^-1 and good cycling performance. Thus, this study provides a new method for controlling the phase and morphology of NSs.

In situ hydrothermal synthesis of nickel cobalt sulfide nanoparticles embedded on nitrogen and sulfur dual doped graphene for a high performance supercapacitor electrode

Nickel cobalt sulfide nanoparticles (NCS) embedded onto a nitrogen and sulfur dual doped graphene (NS-G) surface are successfully synthesized via a two-step facile hydrothermal process. The electrical double-layer capacitor of NS-G acts as a supporting host for the growth of pseudocapacitance NCS nanoparticles, thus enhancing the synergistic electrochemical performance. The specific capacitance values of 1420.2 F g-1 at 10 mV s-1 and 630.6 F g-1 at 1 A g-1 are achieved with an impressive capability rate of 76.6% preservation at 10 A g-1. Furthermore, the integrating NiCo2S4 nanoparticles embedding onto the NS-G surface also present a surprising improvement in the cycle performance, maintaining 110% retention after 10 000 cycles. Owing to the unique morphology an impressive energy density of 19.35 W h kg-1 at a power density of 235.0 W kg-1 suggests its potential application in high-performance supercapacitors.

A soft molecular 2Fe-2As precursor approach to the synthesis of nanostructured FeAs for efficient electrocatalytic water oxidation

An unprecedented molecular 2Fe-2As precursor complex was synthesized and transformed under soft reaction conditions to produce an active and long-term stable nanocrystalline FeAs material for electrocatalytic water oxidation in alkaline media. The 2Fe2As-centred β-diketiminato complex, having an unusual planar Fe2As2 core structure, results from the salt-metathesis reaction of the corresponding β-diketiminato FeIICl complex and the AsCO- (arsaethynolate) anion as the monoanionic As- source. The as-prepared FeAs phase produced from the precursor has been electrophoretically deposited on conductive electrode substrates and shown to act as a electro(pre)catalyst for the oxygen evolution reaction (OER). The deposited FeAs undergoes corrosion under the severe anodic alkaline conditions which causes extensive dissolution of As into the electrolyte forming finally an active two-line ferrihydrite phase (Fe2O3(H2O) x ). Importantly, the dissolved As in the electrolyte can be fully recaptured (electro-deposited) at the counter electrode making the complete process eco-conscious. The results represent a new and facile entry to unexplored nanostructured transition-metal arsenides and their utilization for high-performance OER electrocatalysis, which are also known to be magnificent high-temperature superconductors.