Microelectrode arrays with active-area geometries defined by spatial light modulation

Nanoporous gold microelectrode for electrochemical sensing of As(III) in cellular environment

The highly toxic arsenite (As(III)) could cause serious cytotoxicity on metabolism, resulting in several diseases. However, it is still a great challenge on the precise sensing of As(III) in complicated conditions, especially in cellular environment. In this work, a nanoporous gold microelectrode (NPG-μE) was fabricated by a simple electrochemical alloying/dealloying method and developed for the electroanalysis of As(III) in the lung cancer cellular (A549 cells) environment. The as-fabricated NPG-μE exhibited the excellent electrochemical performance towards As(III) detection at physiological pH (0.1 M PBS solution, pH 7.4) with a high sensitivity of 5.07 μA ppb-1 cm-2 and a low limit of detection of 0.25 ppb (S/N = 3). The large surface area derived from the nanoporous structure, and the well-dispersed active sites as well as the highly electro-catalytic activity of gold played a critical role on the improved electrochemical behaviors. Furthermore, the effect of the exposure time on electrochemical monitoring As(III) in A549 cellular environment was successfully investigated, revealing the fatal impact of As(III) on cell cycle. This work offered a great trial on investigating of the cytotoxicity of arsenite and their precise detection in complicated cellular environment.

Separating Convective from Diffusive Mass Transport Mechanisms in Ionic Liquids by Redox Pro-fluorescence Microscopy

The study of electrochemical reactivity requires analytical techniques capable of probing the diffusion of reactants and products to and from electrified interfaces. Information on diffusion coefficients is often obtained indirectly by modeling current transients and cyclic voltammetry data, but such measurements lack spatial resolution and are accurate only if mass transport by convection is negligible. Detecting and accounting for adventitious convection in viscous and wet solvents, such as ionic liquids, is technically challenging. We have developed a direct, spatiotemporally resolved optical tracking of diffusion fronts which can detect and resolve convective disturbances to linear diffusion. By tracking the movement of an electrode-generated fluorophore, we demonstrate that parasitic gas evolving reactions lead to 10-fold overestimates of macroscopic diffusion coefficients. A hypothesis is put forward linking large barriers to inner-sphere redox reactions, such as hydrogen gas evolution, to the formation of cation-rich overscreening and crowding double layer structures in imidazolium-based ionic liquids.

Voltammetric Measurement of Rates and Energetics for Surface Methoxylation of Si(100) in Methanol with Dissolved Electron Acceptors Using Si Ultramicroelectrodes

The steady-state voltammetric responses of n-type Si(100) semiconductor ultramicroelectrodes (SUMEs) immersed in air- and water-free methanolic electrolytes have been measured. The response characteristics of these SUMEs in the absence of illumination were modeled and understood through a framework that describes the distribution of the applied potential across the semiconductor/electrolyte contact using four discrete regions: the semiconductor space charge, surface, Helmholtz, and diffuse layers. The latter region was described by the full Gouy-Chapman model. This framework afforded insight on how relevant parameters such as the semiconductor band edge potentials, the reorganization energies for charge transfer, the standard potential of redox species in solution, the density and energy of surface state populations, and the presence of an insulating (tunneling) layer individually and collectively dictate the observable current-potential responses. With this information, the methoxylation of Si surfaces was evaluated by analysis of the change in voltammetric responses during the course of prolonged immersion in methanol. The electrochemical data were consistent with a surface methoxylation mechanism that depended on the standard potential of redox species dissolved in solution. Estimates of the enthalpies of adsorption as well as the potential-dependent rate constant for surface methoxylation were obtained. Collectively, these measurements supported the contention that the rates of Si surface reactions can be systematically tuned by exposure to dissolved outer-sphere electron acceptors. Moreover, the data represent the quantitative utility of voltammetry with SUMEs for the measurement of semiconductor/liquid contacts.

Light-Addressable Electrochemical Sensors toward Spatially Resolved Biosensing and Imaging Applications

The light-addressable electrochemical sensor (LAES) is a recently emerged bioanalysis technique combining electrochemistry with the photoelectric effect in a semiconductor. In an LAES, a semiconductor substrate is illuminated locally to generate charge carriers in a well-defined area, thereby confining the electrochemical process to a target site. Benefiting from the unique light addressability, an LAES can not only detect multiple analytes in parallel within a single sensor plate but also act as a bio(chemical) imaging sensor to visualize the two-dimensional distribution of specific analytes. An LAES usually has three working modes: a potentiometric mode using light-addressable potentiometric sensors (LAPS) and an impedance mode using scanning photoinduced impedance microscopy (SPIM), while an amperometric mode refers to light-addressable electrochemistry (LAE) and photoelectrochemical (PEC) sensing. In this review, we describe the detection principles of each mode of LAESs and the concept of light addressability. In addition, we highlight the recent progress and advance of LAESs in spatial resolution, sensor system design, multiplexed detection, and bio(chemical) imaging applications. An outlook on current research challenges and future prospects is also presented.