Binder-free electrophoretic deposition of Sb/rGO on Cu foil for superior electrochemical performance in Li-ion and Na-ion batteries

Multifunctional Cyclized Polyacrylonitrile (cPAN) as a Coating for Sb-Based Anodes in Sodium-Ion Batteries

Conversion electrodes, such as antimony (Sb), are high energy density electrode materials for sodium-ion batteries (NIBs). These materials are limited in their performance due to the mechanical instability of these systems resulting from volume expansion of the material during cycling. Stabilizing conversion materials using a conductive polymer binder (CPB) protective layer is an effective way to enhance the performance of these materials. There is, however, a lack of a clear understanding of how CPBs affect the (de)insertion and surface chemistry of these systems. Herein, we report the systematic investigation of the effects on Na-ion (de)insertion chemistry of a cyclized-polyacrylonitrile (cPAN) layer on Sb-based conversion electrodes in NIBS. Through electrochemical characterization, it was determined that the inclusion of a cPAN layer increases the achievable capacity of the electrode system due to the storage of Na ions by the cPAN layer and facilitates Na-ion transport to the Sb active material at early cycles by reducing the charge transfer resistance of the ensemble electrode.

Binder-Free Anodes for Potassium-ion Batteries Comprising Antimony Nanoparticles on Carbon Nanotubes Obtained Using Electrophoretic Deposition

Antimony has a high theoretical capacity and suitable alloying/dealloying potentials to make it a future anode for potassium-ion batteries (PIBs); however, substantial volumetric changes, severe pulverization, and active mass delamination from the Cu foil during potassiation/depotassiation need to be overcome. Herein, we present the use of electrophoretic deposition (EPD) to fabricate binder-free electrodes consisting of Sb nanoparticles (NPs) embedded in interconnected multiwalled carbon nanotubes (MWCNTs). The anode architecture allows volume changes to be accommodated and prevents Sb delamination within the binder-free electrodes. The Sb mass ratio of the Sb/CNT nanocomposites was varied, with the optimized Sb/CNT nanocomposite delivering a high reversible capacity of 341.30 mA h g-1 (∼90% of the initial charge capacity) after 300 cycles at C/5 and 185.69 mA h g-1 after 300 cycles at 1C. Postcycling investigations reveal that the stable performance is due to the unique Sb/CNT nanocomposite structure, which can be retained over extended cycling, protecting Sb NPs from volume changes and retaining the integrity of the electrode. Our findings not only suggest a facile fabrication method for high-performance alloy-based anodes in PIBs but also encourage the development of alloying-based anodes for next-generation PIBs.

Faceted Antimony Particles with Interiors Reinforced with Reduced Graphene Oxide as High-Performance Anode Material for Sodium-Ion Batteries

The attainment of "true reinforcement" in a composite and harnessing of the associated beneficial effects have been demonstrated here through the development of faceted crystalline Sb particles having the interiors reinforced with reduced graphene oxide (rGO). Such a unique and "near-ideal" micro/nanocomposite architecture has been achieved via a facile/cost-effective route by facilitating heterogeneous nucleation/growth of Sb-oxide particles on/around dispersed rGO sheets upon incorporation of the same directly into the precursor suspension, followed by the reduction of Sb-oxide to Sb, in intimate contact with the rGO, during the subsequent single heat-treatment step. As a potential anode material for Na-ion batteries, the as-developed Sb/rGO composite exhibits a reversible Na-storage capacity of ∼550 mAh/g (@ 0.2 A/g) and a fairly high first cycle Coulombic efficiency (CE) of ∼79%, with the good reversibility being attributed to the coarse particle size of Sb and encompassing of rGO sheets inside the Sb particles. Furthermore, despite the coarse particle size, the Sb/rGO-based electrode exhibits outstanding cyclic stability, with negligible capacity fade up to 150 cycles (viz., ∼97% capacity retention), and rate capability, with >86% capacity being obtained upon raising the current density from 0.1 to 2 A/g, resulting in a capacity of ∼490 mAh/g, even at 2 A/g.

Na ion batteries: An India centric review

Developing low-cost and safe energy storage devices is the primary goal of every country to make a carbon-neutral atmosphere by ∼2050. Batteries and supercapacitors are the backbones of future sustainable energy sources for electrical vehicles (EVs), smart electronic devices, electricity supply to off-grid regions, etc. Hence, these battery-dependent devices are substantially gaining the market. Although lithium-ion batteries account for powering most of these devices, lithium availability and price pose a severe problem since lithium resources are not abundant in nature. Thus, alternative research on sodium-ion or other multi-charged cations (Al3+/Mg2+/Ca2+/K+) based energy storage devices is needed to substitute lithium-ion batteries. India and many other countries have sodium in abundance. Sodium also has potential in designing and developing efficient charge storage devices. This review article discusses the status of sodium-ion battery research activities, cost, market analysis, and future strategies of the Indian government or private bodies, industries, and research institutes of India.

Antimony (Sb)-Based Anodes for Lithium–Ion Batteries: Recent Advances

To mitigate the use of fossil fuels and maintain a clean and sustainable environment, electrochemical energy storage systems are receiving great deal of attention, especially rechargeable batteries. This is also associated with the growing demand for electric vehicles, which urged the automotive industries to explore the capacities of new materials for use in lithium–ion batteries (LIBs). Graphite is still employed as an anode in large majority of currently available commercial LIBs preserving their better cyclic stability despite enormous research efforts to identify viable alternatives with improved power and energy density. From this point of view, antimony acts as a promising material because it has good theoretical capacity, high volumetric capacity, good reactivity with lithium and good electronic conductivities. Recently, there have been many works that focused on the development of antimony as an alternative anode. This review tries to give a bird’s eye view comprising the experimental and theoretical insights on the developments in the direction of using antimony and antimony composites as anodes for rechargeable Li.

Lithium Storage Mechanism and Application of Micron-Sized Lattice-Reversible Binary Intermetallic Compounds as High-Performance Flexible Lithium-Ion Battery Anodes

A strategy of lattice-reversible binary intermetallic compounds of metallic elements is proposed for applications in flexible lithium-ion battery (LIB) anode with high capacity and cycling stability. First, the use of metallic elements can ensure excellent electronic conductivity and high capacity of the active anode substance. Second, binary intermetallic compounds possess a larger initial lattice volume than metallic monomers, so that the problem of volume expansion can be alleviated. Finally, the design of binary intermetallic compounds with lattice reversibility further improves the cycle stability. In this work, the feasibility of this strategy is verified using an indium antimonide (InSb) system. The volumetric expansion and lithium storage mechanism of InSb are investigated by in situ Raman characterization and theoretical calculations. The active material utilization is significantly improved and the growth of In whiskers is inhibited in the micron-sized ball-milled and carbon coated InSb (bInSb@C) anode, which exhibits a reversible capacity of 733.8 mAh g^-1 at 0.2 C, and provides a capacity of 411.5 mAh g^-1 after 200 cycles at 3 C with an average Coulombic efficiency of 99.95%. This strategy is validated in pouch cells, illustrating the great potential of lattice-reversible binary intermetallic compounds for use as commercial flexible LIB anodes.

Engineering Nanostructured Antimony-Based Anode Materials for Sodium Ion Batteries

Sodium-ion batteries (SIBs) are considered a potential alternative to lithium-ion batteries (LIBs) for energy storage due to their low cost and the large abundance of sodium resources. The search for new anode materials for SIBs has become a vital approach to satisfying the ever-growing demands for better performance with higher energy/power densities, improved safety and a longer cycle life. Recently, antimony (Sb) has been extensively researched as a promising candidate due to its high specific capacity through an alloying/dealloying process. In this review article, we will focus on different categories of the emerging Sb based anode materials with distinct sodium storage mechanisms including Sb, two-dimensional antimonene and antimony chalcogenide (Sb2S3 and Sb2Se3). For each part, we emphasize that the novel construction of an advanced nanostructured anode with unique structures could effectively improve sodium storage properties. We also highlight that sodium storage capability can be enhanced through designing advanced nanocomposite materials containing Sb based materials and other carbonaceous modification or metal supports. Moreover, the recent advances in operando/in-situ investigation of its sodium storage mechanism are also summarized. By providing such a systematic probe, we aim to stress the significance of novel nanostructures and advanced compositing that would contribute to enhanced sodium storage performance, thus making Sb based materials as promising anodes for next-generation high-performance SIBs.

Effects of Deep Cryogenic Treatment on the Microstructure and Properties of Rolled Cu Foil

The development of fifth-generation (5G) communication and wearable electronics generates higher requirements for the mechanical properties of copper foil. Higher mechanical properties and lower resistance are required for flexible copper-clad laminate and high-frequency and high-speed Cu foil. Deep cryogenic treatment (DCT), as a post-treatment method, has many advantages, such as low cost and ease of operation. However, less attention has been paid to the impact of DCT on rolled Cu foil. In this study, the effects of DCT on the microstructure and mechanical properties of rolled Cu foil were investigated. The results show that as the treatment time increased, the tensile strength and hardness first increased and then decreased, reaching a peak value of 394.06 MPa and 1.47 GPa at 12 h. The mechanical property improvement of rolled Cu foil was due to the grain refinement and the increase of dislocation density. The dislocation density of rolled Cu foil after a DCT time of 12 h was determined to have a peak value of 4.3798 × 10¹⁵ m^-2. The dislocation density increased by 19% and the grain size decreased by 12% after 12 h DCT.