The preparation of Co3O4@MnO2 hierarchical nano-sheets for high-output potential supercapacitors

Review on recent advancements in the role of electrolytes and electrode materials on supercapacitor performances

Supercapacitors currently hold a prominent position in energy storage systems due to their exceptionally high power density, although they fall behind batteries and fuel cells in terms of energy density. This paper examines contemporary approaches aimed at enhancing the energy density of supercapacitors by adopting hybrid configurations, alongside considerations of their power density, rate capability, and cycle stability. Given that electrodes play a pivotal role in supercapacitor cells, this review focuses on the design of hybrid electrode structures with elevated specific capacitance, shedding light on the underlying mechanisms. Factors such as available surface area, porosity, and conductivity of the constituent materials significantly influence electrode performance, prompting the adoption of strategies such as nanostructuring. Additionally, the paper delves into the impact of novel bio-based hybrid electrolytes, drawing upon literature data to outline the fabrication of various hybrid electrode materials incorporating conducting polymers like polyaniline and polypyrrole, as well as metal oxides, carbon compounds, and hybrid electrolytes such as ionic liquids, gel polymers, aqueous, and solid polymer electrolytes. The discussion explores the contributions of different components and methodologies to overall capacitance, with a primary emphasis on the mechanisms of energy storage through non-faradic electrical double-layer capacitance and faradaic pseudo-capacitance. Furthermore, the paper addresses the electrochemical performance of hybrid components, examining their concentrations and functioning via diverse charge storage techniques.

Constructing Co3O4 Nanowire@NiCo2O4 Nanosheet Hierarchical Array as Electrode Material for High-Performance Supercapacitor

The Co3O4 nanowire@NiCo2O4 nanosheet hierarchical array was constructed on Ni foam using hydrothermal and annealing approaches in turn, from which a NiCo2O4 nanosheet could self-assemble on the Co3O4 nanowire. The structure and morphology of the Co3O4 nanowire@NiCo2O4 nanosheet hierarchical array were characterized via XRD, EDS, SEM, and FESEM, respectively. The electrochemical performance of the composite array was measured via a cyclic voltammetry curve, galvanostatic current charge-discharge, charge-discharge cycle, and electrochemical impedance and then compared with the Co3O4 nanowire. The results show that the Co3O4 nanowire@NiCo2O4 nanosheet hierarchical array could reach a high value of 2034 F g-1 at a current density of 2.5 A g-1. After 5000 galvanostatic charge-discharge cycles, the specific capacitance of the Co3O4 nanowire@NiCo2O4 nanosheet hierarchical array could still maintain 94.7% of the original value. Therefore, the Co3O4 nanowire@NiCo2O4 nanosheet hierarchical array would be a desirable electrode material for a high-performance supercapacitor.

Self-templated fabrication of P-doped CoMoO4-Co3O4 hollow nanocages for the efficient oxygen evolution reaction

Finding reservoir-rich and efficient electrocatalysts for the alkaline oxygen evolution reaction (OER) is crucial for further sustainable energy development. Despite the advantages of high earth abundance, easy availability, and tunable composition, transition-metal oxides are typically considered poor electrocatalysts for the OER. In this study, a composite P-doped CoMoO4-Co3O4 hollow nanocage is deliberately synthesized through a cation-exchange, pyrolysis, and phosphorization approach using an innovative self-template strategy with ZIF-67 as the sacrificial template. Hollow nanocages provide large surface areas and abundant active sites, enhancing electron transfer. Hybridization with other components increases the number of electrochemically reactive sites and optimizes the advantages of different element components. As a result, the P-CoMoO4-Co3O4 hollow nanocage catalyst demonstrates high OER performance, with an overpotential of 279 mV at a current density of 10 mA cm-2. Additionally, P-CoMoO4-Co3O4 catalysts exhibit good dispersibility and excellent long-term stability. Experimental findings and density functional theory (DFT) calculations indicate that the phosphorus-doping effect in various aspects contributes significantly to the superior catalytic activity of P-CoMoO4-Co3O4. This work provides a valuable method for designing cost-effective P doped Co-based bimetal oxide catalysts with outstanding OER performance for industrial applications.

Investigation of the Electrochemical Behavior of CuO-NiO-Co3O4 Nanocomposites for Enhanced Supercapacitor Applications

In the present study, composites incorporating NiO-Co3O4 (NC) and CuO-NiO-Co3O4 (CNC) as active electrode materials were produced through the hydrothermal method and their performance was investigated systematically. The composition, formation, and nanocomposite structure of the fabricated material were characterized by XRD, FTIR, and UV-Vis. The FE-SEM analysis revealed the presence of rod and spherical mixed morphologies. The prepared NC and CNC samples were utilized as supercapacitor electrodes, demonstrating specific capacitances of 262 Fg-1 at a current density of 1 Ag-1. Interestingly, the CNC composite displayed a notable long-term cyclic stability 84.9%, which was observed even after 5000 charge-discharge cycles. The exceptional electrochemical properties observed can be accredited to the harmonious effects of copper oxide addition, the hollow structure, and various metal oxides. This approach holds promise for the development of supercapacitor electrodes. These findings collectively indicate that the hydrothermally synthesized NC and CNC nanocomposites exhibit potential as high-performance electrodes for supercapacitor applications.

Constructing Z-scheme NiMoO4@Co3O4 core-shell heterogeneous architectures with prominent photoelectrocatalytic performance toward water purification

Photoelectrocatalysis (PEC) oxidation is an efficient and eco-friendly advanced oxidation process (AOP), which is a hot research topic in the treatment of organic wastewater. The selection of superior photoelectrode materials is the critical factor affecting PEC efficiency and the main challenge in practical application. In this work, novel NiMoO₄@Co₃O₄ hierarchical core-shell heterogeneous photoanodes were prepared through a two-step hydrothermal method and exhibited superior catalytic performance in the degradation of reactive brilliant blue KN-R. The wrapping of NiMoO₄ nanosheets on Co₃O₄ nanowires electrode can enlarge its contact area with electrolyte, enable fast redox reaction and improve the long-term durability. The unique Z-scheme heterojunction structure between the two components ensured the effective separation of photo-generated carriers, facilitating the generation of OH and O^2- during the PEC degradation process. The optimal NiMoO₄@Co₃O₄-1.25 hierarchical architecture anode catalyst exhibited the highest removal rate of 83.65% of reactive brilliant blue KN-R in 120 min with long-term stability (∼12000 s) in 1.0 mol·L^-1 H₂SO₄ solution. This report may inspire the design and fabrication of heterostructure photoanode in water purification.

Phytosynthesis of Co3O4 Nanoparticles as the High Energy Storage Material of an Activated Carbon/Co3O4 Symmetric Supercapacitor Device with Excellent Cyclic Stability Based on a Na2SO4 Aqueous Electrolyte

The benign preparation of cobalt oxide nanoparticles (Co3O4-NPs) was performed using marine red algae extract (Grateloupia sparsa) as a simple, cost-effective, scalable, and one-pot hydrothermal technique. The nominated extract was employed as an environmental reductant and stabilizing agent. The resultant product showed the typical peak of Co3O4-NPs around 400 nm wavelength as ascertained by UV-vis spectroscopy. Size and morphological techniques combined with X-ray diffraction (XRD) showed the small size of Co3O4-NPs deformed in a spherical shape. The activated carbon (AC) electrode and Co3O4-NP electrode delivered a specific capacitance (C sp) of 125 and 182 F g-1 at 1 A g-1, respectively. The energy density of the AC and AC/Co3O4 electrodes with a power density of 543.44 and 585 W kg-1 was equal to 17.36 and 25.27 Wh kg-1, respectively. The capacitance retention of designed electrodes was 99.2 and 99.5% after 3000 cycles. Additionally, a symmetric AC/Co3O4//AC/Co3O4 supercapacitor device had a specific capacitance (C sp) of 125 F g-1 and a high energy density of 55 Wh kg-1 at a power density of 650 W kg-1. Meanwhile, the symmetric device exhibited superior cyclic stability after 8000 cycles, with a capacitance retention of 93.75%. Overall, the adopted circular criteria, employed to use green technology to avoid noxious chemicals, make the AC/Co3O4 nanocomposite an easily accessible electrode for energy storage applications.

Recent Developments in Supercapacitor Electrodes: A Mini Review

The use of nonrenewable fossil fuels for energy has increased in recent decades, posing a serious threat to human life. As a result, it is critical to build environmentally friendly and low-cost reliable and renewable energy storage solutions. The supercapacitor is a future energy device because of its higher power density and outstanding cyclic stability with a quick charge and discharge process. Supercapacitors, on the other hand, have a lower energy density than regular batteries. It is well known that the electrochemical characteristic of supercapacitors is strongly dependent on electrode materials. The current review highlights advance in the TMOs for supercapacitor electrodes. In addition, the newly discovered hybrid/pseudo-supercapacitors have been discussed. Metal oxides that are employed as electrode materials are the focus of this study. The discovery of nanostructured electrode materials continues to be a major focus of supercapacitor research. To create high-performance electrode materials from a morphological standpoint, various efforts have been attempted. Lastly, we analyze the supercapacitor’s evolving trend and our perspective for the future generations of supercapacitors.

Fabrication of an ultra-stable composite electrode material of La2O3/Co3O4/graphene on nickel foam for high-performance supercapacitors

A three-dimensional lily-like structure was constructed by the novel combination of La2O3, Co3O4, and graphene on nickel foam (LCGN) through hydrothermal synthesis and thermal annealing.

Engineering Co3O4/MnO2 nanocomposite materials for oxygen reduction electrocatalysis

Stable and active electrocatalysts preparation for the oxygen reduction reaction (ORR) is essential for an energy storage and conversion materials (e.g. metal-air batteries). Herein, we prepared a highly-active MnO₂ and Co₃O₄/MnO₂ nanocomposite electrocatalysts using a facial co-precipitation approach. The electrocatalytic activity was examined in alkaline media with LSV and CV. Additionally, the physicochemical characteristics of the MnO₂ and Co₃O₄/MnO₂ composite materials were studied via SEM, XRD, BET, UV-Vis, TGA/DTA, ICP-OES and FTIR. Morphological studies indicated that a pure MnO₂ has a spherical flower-like architecture, whereas Co₃O₄/MnO₂ nanocomposites have an aggregated needle-like structure. Moreover, from the XRD investigation parameters such as the dislocation density, micro-strain, and crystallite size were analyzed. The calculated energy bandgaps for the MnO₂, Co₃O₄/MnO₂-1-5, and Co₃O₄/MnO₂-1-1 nanocomposites were 3.07, 2.6, and 2.3 eV, correspondingly. The FTIR spectroscopy was also employed to study the presence of M-O bonds (M = Mn, Co). The thermal gravimetric investigation showed that the Co₃O₄/MnO₂ nanocomposite materials exhibited improved thermal stability, confirming an enhanced catalytic activity of ORR for MnO₂/Co₃O₄-1-1 composite materials for ORR. These results confirm that the prepared Co₃O₄/MnO₂ composite materials are promising air electrode candidates for the energy storage and conversion technologies.

Synergistically boosting the electrochemical performance of polypyrrole-coated activated carbon derived from carbon dots for a high-performance supercapacitor

Hybrid materials were prepared via the controlled fumigation-based polymerization of pyrrole on the surface of activated carbon derived from carbon dots, combining the stability of carbon materials, the wettability of carbon dots, and the high pseudocapacitance of polypyrrole; all of these synergistically boosted the electrochemical performance, resulting in a high specific capacitance (481 F g^-1) and good stability for supercapacitor applications.

Transition Metal Oxide Electrode Materials for Supercapacitors: A Review of Recent Developments

In the past decades, the energy consumption of nonrenewable fossil fuels has been increasing, which severely threatens human life. Thus, it is very urgent to develop renewable and reliable energy storage devices with features of environmental harmlessness and low cost. High power density, excellent cycle stability, and a fast charge/discharge process make supercapacitors a promising energy device. However, the energy density of supercapacitors is still less than that of ordinary batteries. As is known to all, the electrochemical performance of supercapacitors is largely dependent on electrode materials. In this review, we firstly introduced six typical transition metal oxides (TMOs) for supercapacitor electrodes, including RuO₂, Co₃O₄, MnO₂, ZnO, XCo₂O₄ (X = Mn, Cu, Ni), and AMoO₄ (A = Co, Mn, Ni, Zn). Secondly, the problems of these TMOs in practical application are presented and the corresponding feasible solutions are clarified. Then, we summarize the latest developments of the six TMOs for supercapacitor electrodes. Finally, we discuss the developing trend of supercapacitors and give some recommendations for the future of supercapacitors.