Pomegranate structured C@pSi/rGO composite as high performance anode materials of lithium-ion batteries

Realized Record Capacity and Rate Performance of Dual-Carbon Batteries Constructed by Introducing Superhard Nanodiamonds

Dual-ion batteries (DIBs) are becoming an important technology for energy storage. To overcome the disadvantages of traditional electrodes and electrolytes, here we assemble a dual-carbon DIB with nanodiamond (ND)-modified crimped graphene (DCG) and electrolyte. The DCG anode and cathode realize high capacities of 1121 mA h g-1 and 149 mA h g-1, respectively, at 0.1 A g-1. The corresponding DCG//DCG full cells present a high capacity of 143 mA h g-1 at 1 A g-1 after 3300 cycles, which is superior to most reported results. Achieving these record performances is strongly dependent on the formed DCG electrodes with expanded interlayer spacing and abundant active sites, and NDs dispersed in DCG and electrolytes are very helpful for enhancing the storage of both cations and anions, effectively suppressing the irreversible decomposition of electrolytes. This work breaks through the bottleneck of graphitic-based DIBs, paving the way for realizing high-performance DIBs applied in industry.

Microspheres of Si@Carbon-CNTs composites with a stable 3D interpenetrating structure applied in high-performance lithium-ion battery

The huge volumetric expansion (>300 %) of Si that occurs during the charge-discharge process makes it to have poor cycling ability and weak stable structure. These factors are considered as critical obstacles to the further development of Si as anode for lithium-ion batteries (LIBs). Herein, novel 3D interpenetrating microspheres, i.e., Si@C-CNTs, which consist of silicon nanoparticles interpenetrated with carbon nanotubes (CNTs) and stuck with amorphous carbon (C) have been designed and prepared via a spray-drying assisted approach. As anode of LIBs, Si@C-CNTs microspheres can achieve high silicon loadings of around 86 % and a high initial coulomb efficiency of 80.8 %. The electrodes maintain a reversible specific capacity of 1585.9mAh/g at 500 mA g-1 after 200 cycles, and deliver an excellent rate capability of 756.4 mAh/g at 5 A g-1. The outstanding performance of Si@C-CNTs can be due to their 3D interpenetrating structure and the synergy effect between the CNTs network and amorphous carbon therein. They synergistically act as conductive matrices which significantly improve the conductivity of the composite; they also act binders and reinforcing skeleton which help the composite spheres to have stable structure. Especially, the latter (reinforcing skeleton) alleviates the volumetric effect induced by the expansion and shrinkage of silicon particles during lithiation. The unique architecture provides an ideal model that can be used to design Si-based composite anode for advanced LIBs.

Research Progress on Coating Structure of Silicon Anode Materials for Lithium-Ion Batteries

Silicon, which has been widely studied by virtue of its extremely high theoretical capacity and abundance, is recognized as one of the most promising anode materials for the next generation of lithium-ion batteries. However, silicon undergoes tremendous volume change during cycling, which leads to the destruction of the electrode structure and irreversible capacity loss, so the promotion of silicon materials in commercial applications is greatly hampered. In recent years, many strategies have been proposed to address these shortcomings of silicon. This Review focused on different coatings materials (e. g., carbon-based materials, metals, oxides, conducting polymers, etc.) for silicon materials. The role of different types of materials in the modification of silicon-based material encapsulation structure was reviewed to confirm the feasibility of the protective layer strategy. Finally, the future research direction of the silicon-based material coating structure design for the next-generation lithium-ion battery was summarized.

Graphene composite 3,4,9,10-perylenetetracarboxylic sodium salts with a honeycomb structure as a high performance anode material for lithium ion batteries

In order to address the issues of high solubility in electrolytes, poor conductivity and low active site utilization of organic carbonyl electrode materials, in this work, the 3,4,9,10-perylenetetracarboxylic sodium salt (PTCDA-Na) and its graphene composite PTCDA-Na-G are prepared by the hydrolysis of 3,4,9,10-perylenetetracarboxylic dianhydride and the strategy of antisolvent precipitation. The obtained PTCDA-Na active substance has a porous honeycomb structure, showing a large specific surface area. Moreover, after recombination with graphene, the dispersion and specific surface area of PTCDA-Na are further enhanced, and more active sites are exposed and conductivity is improved. As a result, the PTCDA-Na-G composite electrode materials exhibit superior electrochemical energy storage behaviors. The initial charge capacity of the PTCDA-Na-G electrode is 890.5 mA h g-1, and after 200 cycles, the capacity can still remain at 840.0 mA h g-1 with a high retention rate of 94.3%, which is much larger than those of the PTCDA-Na electrode. In addition, at different current densities, the PTCDA-Na-G electrode also presents higher capacities and better cycle stability than the PTCDA-Na electrode. Compared with PTCDA-Na with a porous honeycomb structure and previously reported sodium carboxylic acid salts with a large size bulk structure, the PTCDA-Na-G composite material prepared in this work shows superior electrochemical energy storage properties due to its large specific surface area, high dispersion, more exposed active sites and large electrical conductivity, which would provide new ideas for the development of high performance organic electrode materials for lithium-ion batteries.

In Situ Formed Weave Cage-Like Nanostructure Wrapped Mesoporous Micron Silicon Anode for Enhanced Stable Lithium-Ion Battery

The low-cost and high-capacity micron silicon is identified as the suitable anode material for high-performance lithium-ion batteries (LIBs). However, the particle fracture and severe capacity fading during electrochemical cycling greatly impede the practical application of LIBs. Herein, we first proposed an in situ reduction and template assembly strategy to attain a weave cage-like carbon nanostructure, composed of short carbon nanotubes and small graphene flakes, as a flexible nanotemplate that closely wrapped micron-sized mesoporous silicon (PSi) to form a robust composite construction. The in situ formed weave cage-like carbon nanostructure can remarkably improve the electrochemical property and structural stability of micron-sized PSi during deep galvanostatic cycling and high electric current density owing to multiple attractive advantages. As a result, the rechargeable LIB applying this anode material exhibits improved initial Coulombic efficiency (ICE), excellent rate performance, and cyclic stability in the existing micron-sized PSi/nanocarbon system. Moreover, this anode reached an approximation of 100% ICE after only three cycles and maintains this level in subsequent cycles. This design of flexible nanotemplated platform wrapped micron-sized PSi anode provides a steerable nanoengineering strategy toward conquering the challenge of long-term reliable LIB application.