One-step synthesis of γ-Fe2O3/Fe3O4 nanocomposite for sensitive electrochemical detection of hydrogen peroxide

Iron-based electrode material composites for electrochemical sensor application in the environment: A review

This review explores the expanding role of electrochemical sensors across diverse domains such as environmental monitoring, medical diagnostics, and food quality assurance. In recent years, iron-based electrocatalysts have emerged as promising candidates for enhancing sensor performance. Notable for their non-toxicity, abundance, catalytic activity, and cost-effectiveness, these materials offer significant advantages. However, further investigation is needed to fully understand how iron-based materials' physical, chemical, and electrical properties influence their catalytic performance in sensor applications. It explores the overview of electrochemical sensor technology, examines the impact of iron-based materials and their characteristics on catalytic activity, and investigates various iron-based materials, their advantages, functionalization, and modification techniques. Additionally, the review investigates the application of iron-based electrode material composites in electrochemical sensors for real sample detections. Ultimately, continued research and development in this area promise to unlock new avenues for using iron-based electrode materials in sensor applications.

A Novel Ferrocene-Linked Thionine as a Dual Redox Mediator for the Electrochemical Detection of Dopamine and Hydrogen Peroxide

We introduce a novel dual redox mediator synthesized by covalently linking ferrocene dicarboxylic acid (FcDA) and thionine (TH) onto a pre-treated glassy carbon electrode. This unique structure significantly enhances the electro-oxidation of dopamine (DA) and the reduction of hydrogen peroxide (H2O2), offering a sensitive detection method for both analytes. The electrode exhibits exceptional sensitivity, selectivity, and stability, demonstrating potential for practical applications in biosensing. It facilitates rapid electron transfer between the analyte and the electrode surface, detecting H2O2 concentrations ranging from 1.5 to 60 µM with a limit of detection (LoD) of 0.49 µM and DA concentrations from 0.3 to 230 µM with an LoD of 0.07 µM. The electrode's performance was validated through real-sample analyses, yielding satisfactory results.

A dual-modal electrochemical aptasensor based on intelligent DNA Walker with cascade signal amplification powered by Nb.BbvCI for Pb2

As a unique nanomachine, DNA Walker can move continuously along a specific orbit to amplify signal. Therefore, based on DNA Walker and endonuclease assisted signal amplification strategy, a novel dual-mode visual electrochemical aptasensor was constructed for the detection of Pb²⁺. Ceric dioxide@mesoporous carbon (CeO₂/CS)@AuNPs not only could improve the conductivity of sensing interface but also could fix the aptamer. DNA Walker moved on the surface of the electrode to realize the pairing with the Ag-γFe₂O₃/cDNA probe, forming a special base sequence that could be spliced by the Nb.BbvCI. Under the action of endonuclease Nb.BbvCI, the Ag-γFe₂O₃/cDNA probe was continuously sheared and the amount on the electrode was decreased to amplify the signal. Besides, the nanoenzyme of Ag-γFe₂O₃ could catalyze 3'3'5'5'-tetramethylbenzidine (TMB) to blue color realizing the visual detection of Pb²⁺. The sensor has been successfully applied to the visual and accurate rapid detection of Pb²⁺ in aquatic products. The fabricated method of the sensor open up a new way for visual and accurate the detection of environmental pollutants.

A non-enzymatic electrochemical hydrogen peroxide sensor based on copper oxide nanostructures

This article describes the synthesis of nanostructured copper oxide on copper wires and its application for the detection of hydrogen peroxide. Copper oxide petal nanostructures were obtained by a one-step hydrothermal oxidation method. The resulting coating is uniform and dense and shows good adhesion to the wire surface. Structure, surface, and composition of the obtained samples were studied using field-emission scanning electron microscopy along with energy-dispersive spectroscopy and X-ray diffractometry. The resulting nanostructured samples were used for electrochemical determination of the H2O2 content in a 0.1 M NaOH buffer solution using cyclic voltammetry, differential pulse voltammetry, and i-t measurements. A good linear relationship between the peak current and the concentration of H2O2 in the range from 10 to 1800 μM was obtained. The sensitivity of the obtained CuO electrode is 439.19 μA·mM-1. The calculated limit of detection is 1.34 μM, assuming a signal-to-noise ratio of 3. The investigation of the system for sensitivity to interference showed that the most common interfering substances, that is, ascorbic acid, uric acid, dopamine, NaCl, glucose, and acetaminophen, do not affect the electrochemical response. The real milk sample test showed a high recovery rate (more than 95%). According to the obtained results, this sensor is suitable for practical use for the qualitative detection of H2O2 in real samples, as well as for the quantitative determination of its concentration.

Magnetically induced self-assembly DNAzyme electrochemical biosensor based on gold-modifiedα-Fe2O3/Fe3O4heterogeneous nanoparticles for sensitive detection of Ni2

A magnetically induced self-assembly DNAzyme electrochemical biosensor based on gold-modifiedα-Fe₂O₃/Fe₃O₄heterogeneous nanoparticles was successfully fabricated to detect Nickel(II) (Ni²⁺). The phase composition and magnetic properties ofα-Fe₂O₃/Fe₃O₄heterogeneous nanoparticles controllably prepared by the citric acid (CA) sol-gel method were investigated in detail. Theα-Fe₂O₃/Fe₃O₄heterogeneous nanoparticles were modified by using trisodium citrate as reducing agent, and the magnetically induced self-assemblyα-Fe₂O₃/Fe₃O₄-Au nanocomposites were obtained. The designed Ni²⁺-dependent DNAzyme consisted of the catalytic chain modified with the thiol group (S1-SH) and the substrate chain modified with methylene blue (S2-MB). The MGCE/α-Fe₂O₃/Fe₃O₄-Au/S1/BSA/S2 electrochemical sensing platform was constructed and differential pulse voltammetry was applied for electrochemical detection. Under the optimum experimental parameters, the detection range of the biosensor was 100 pM-10μM (R² = 0.9978) with the limit of detection of 55 pM. The biosensor had high selectivity, acceptable stability, and reproducibility (RSD = 4.03%).