Degradation of polybenzimidazole in alkaline solution with first-principles Modeling

Poly(Arylene Alkylene)s with Tetrazole Pendants for Alkaline Ion-Solvating Polymer Electrolytes

Alkaline ion-solvating membranes derived from a tetrazole functionalized poly(arylene alkylene) are prepared, characterized and evaluated as electrode separators in alkaline water electrolysis. The base polymer, poly[[1,1'-biphenyl]-4,4'-diyl(1,1,1-trifluoropropan-2-yl)], is synthesized by superacid catalyzed polyhydroxyalkylation and subsequently functionalized with tetrazole pendants. After equilibration in aqueous KOH, the relatively acidic tetrazole pendants are deprotonated to form the corresponding potassium tetrazolides. The room temperature ion conductivity is found to peak at 19 mS cm-1 in 5 wt. % KOH, and slightly declines with increasing KOH concentration to 13 mS cm-1 in 30 wt. % KOH. Based on an overall assessment of the mechanical properties, conductivity and electrode activity, 30 wt. % KOH is applied for alkaline electrolysis cell tests. Current densities of up to 1000 mA cm-2 were reached with uncatalyzed Ni-foam electrodes at a cell voltage of less than 2.6 V, with improved gas barrier characteristics compared to that of the several times thicker Zirfon separator.

Separators and Membranes for Advanced Alkaline Water Electrolysis

Traditionally, alkaline water electrolysis (AWE) uses diaphragms to separate anode and cathode and is operated with 5-7 M KOH feed solutions. The ban of asbestos diaphragms led to the development of polymeric diaphragms, which are now the state of the art material. A promising alternative is the ion solvating membrane. Recent developments show that high conductivities can also be obtained in 1 M KOH. A third technology is based on anion exchange membranes (AEM); because these systems use 0-1 M KOH feed solutions to balance the trade-off between conductivity and the AEM's lifetime in alkaline environment, it makes sense to treat them separately as AEM WE. However, the lifetime of AEM increased strongly over the last 10 years, and some electrode-related issues like oxidation of the ionomer binder at the anode can be mitigated by using KOH feed solutions. Therefore, AWE and AEM WE may get more similar in the future, and this review focuses on the developments in polymeric diaphragms, ion solvating membranes, and AEM.