Heterovalent oxynitride GaZnON nanowire as novel flexible anode for lithium-ion storage

Pre-lithiation strategy to design a high-performance zinc oxide anode for lithium-ion batteries

Zinc oxide (ZnO) shows great potential as an anode material for advanced energy storage devices owing to its good structural stability and low cost. However, its inferior cycling capacity seriously restricts its practical application. In this work, a pre-lithiation strategy is adopted to construct pre-lithiated ZnO (Li-ZnO) via the facile solid-state reaction method. This well-designed Li-ZnO is polycrystalline, consisting of fine particles. XPS analysis and Raman results confirm the successful pre-lithiation strategy. The pre-lithiation strategy increases the electronic conductivity of Li-ZnO without further carbon coating and suppresses the volume expansion during the electrochemical reaction. As a result, 5 mol% Li-ZnO displays good reversible capacity with a specific capacity of 639 mA h g-1 after 200 cycles at 0.1 A g-1. After 1440 cycles at 1.0 A g-1, the capacity retention is 380 mA h g-1. The pseudocapacitance contribution can reach up to 72.5% at 1.0 mV s-1. Electrochemical kinetic analysis shows that this pre-lithiation strategy can accelerate the lithium-ion diffusion and charge transfer kinetics of the Li-ZnO anode and suppress the pulverization of the electrochemical reaction. This study demonstrates the necessity of developing new anode materials with good cycling stability via this pre-lithiation strategy.

High-Quality Epitaxial N Doped Graphene on SiC with Tunable Interfacial Interactions via Electron/Ion Bridges for Stable Lithium-Ion Storage

Tailoring the interfacial interaction in SiC-based anode materials is crucial to the accomplishment of higher energy capacities and longer cycle lives for lithium-ion storage. In this paper, atomic-scale tunable interfacial interaction is achieved by epitaxial growth of high-quality N doped graphene (NG) on SiC (NG@SiC). This well-designed NG@SiC heterojunction demonstrates an intrinsic electric field with intensive interfacial interaction, making it an ideal prototype to thoroughly understand the configurations of electron/ion bridges and the mechanisms of interatomic electron migration. Both density functional theory (DFT) analysis and electrochemical kinetic analysis reveal that these intriguing electron/ion bridges can control and tailor the interfacial interaction via the interfacial coupled chemical bonds, enhancing the interfacial charge transfer kinetics and preventing pulverization/aggregation. As a proof-of-concept study, this well-designed NG@SiC anode shows good reversible capacity (1197.5 mAh g-1 after 200 cycles at 0.1 A g-1) and cycling durability with 76.6% capacity retention at 447.8 mAh g-1 after 1000 cycles at 10.0 A g-1. As expected, the lithium-ion full cell (LiFePO4/C//NG@SiC) shows superior rate capability and cycling stability. This interfacial interaction tailoring strategy via epitaxial growth method provides new opportunities for traditional SiC-based anodes to achieve high-performance lithium-ion storage and beyond.

Nanotextured CeO2-SnO2 Composite: Efficient Photocatalytic, Antibacterial, and Energy Storage Fibers

Bacterial infections remain a serious and pervasive threat to human health. Bacterial antibiotic resistance, in particular, lowers treatment efficacy and increases mortality. The development of nanomaterials has made it possible to address issues in the biomedical, energy storage, and environmental fields. This paper reports the successful synthesis of CeO₂-SnO₂ composite nanofibers via an electrospinning method using polyacrylonitrile polymer. Scanning and transmission electron microscopy assessments showed that the average diameter of CeO₂-SnO₂ nanofibers was 170 nm. The result of photocatalytic degradation for methylene blue dye displayed enhanced efficiency of the CeO₂-SnO₂ composite. The addition of SnO₂ to CeO₂ resulted in the enhancement of the light absorption property and enriched charge transmission of photoinduced electron-hole duos, which conspicuously contributed to momentous photoactivity augmentation. Composite nanofibers exhibited higher specific capacitance which may be accredited to the synergism between CeO₂ and SnO₂ particles in nanofibers. Furthermore, antibacterial activity was screened against Escherichia coli and CeO₂-SnO₂ composite nanofibers depicted excellent activity. The findings of this work point to new possibilities as an electrode material in energy storage systems and as a visible-light-active photocatalyst for the purification of chemical and biological contaminants, which would substantially benefit environmental remediation processes.

Zinc vacancy modulated quaternary metallic oxynitride GeZn1.7ON1.8: as a high-performance anode for lithium-ion storage

Zn-defected GeZn1.7ON1.8 (GeZn1.7−xON1.8) was successfully synthesized by a simple ammoniation and acid etching method. This well-designed Zn cation-deficient GeZn1.7−xON1.8 anode shows enhanced lithium-ion storage performance.