Monitoring of microplastics in the clam Donax cuneatus and its habitat in Tuticorin coast of Gulf of Mannar (GoM), India

Evidence of microplastics in the polychaete worm (capitellids-Capitella capitata) (Fabricicus, 1780) along Thoothukudi region

Research on the occurrence of microplastics in invertebrates of the Thoothukudi region is limited. Capitellids are non-selective suspension feeders and are usually used as bioindicator of water pollution. Hence, an investigation was carried out to identify the microplastic occurrence in the capitellids (Capitella capitata) (Fabricius, 1780) collected from the Vellapatti and Spic Nagar sites of the Thoothukudi region. Result from this investigation showed the occurrence of 0.21 ± 0.17 items/indiv and a mean abundance of 13.33% in Thoothukudi coast. The mean microplastic abundance in the capitellids was significantly higher in the Spic Nagar (0.26 ± 0.19 MPs/indiv), probably due to the dumping of plastic waste, fishing and recreational activities. However, no significant difference was observed between seasons. Only fragments (Vellapatti 66.66% and Spic Nagar 33.33%) and fibre-shaped microplastics (Vellapatti 50% and Spic Nagar 50%) were identified. The size and colour of the microplastics dominant in both sites were 1-2 mm (Vellapatti 77.77% and Spic Nagar 75%) and blue (Vellapatti 88.88% and Spic Nagar 87.5%), respectively. The results of Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR) analysis revealed the presence of polyethylene (PE) and polypropylene (PP) polymers in the capitellids. PE polymer is one of the most common sources of microplastics contamination globally and it is also frequently found in the coastal waters of Thoothukudi. This accounted for the high occurrence of PE polymers in the capitellids with the occurrence rate of 77% in Vellapatti and 58.52% in Spic Nagar. The present study provides baseline data on the occurrence, characterization (shapes, sizes and colours) and qualitative analysis of the microplastics in the capitellids, and their presence was influenced by their non-selective feeding habits. Further, future studies have to be conducted to identify the levels of microplastics in different polychaetes and other invertebrates to better understand the effects of microplastic pollution in invertebrate communities.

A systematic review on microplastic contamination in marine Crustacea and Mollusca of Asia: Current scenario, concentration, characterization, polymeric risk assessment, and future Prospectives

Microplastics (MPs) pollution has wreaked havoc on biodiversity and food safety globally. The false ingestion of MPs causes harmful effects on organisms, resulting in a decline in biodiversity. The present review comprehended the current knowledge of MP contamination in Crustacea and Mollusca from 75 peer-reviewed articles published in Asia between 2015 and 2023. A total of 79 species (27 Crustacea and 52 Mollusca) have been recorded to be contaminated with MPs. Out of the total 27 species of Crustacea, Metopograpsus quadridentatus (327.56 MPs/individual) and Balanus albicostatus (0.42 MPs/individual) showed the highest and lowest contamination, respectively. Out of the total 52 species of Mollusca, Dolabella auricularia (2325 MPs/individual) and Crassostrea gigas and Mytilus edulis (0.2 MPs/individual) showed the highest and lowest contamination, respectively. In terms of country-wise MP contamination, China has the highest number of contaminated species in both phylums among Asia. Findings of pollution indices revealed a very high risk of MP contamination in all the countries. Fiber was reported predominantly in both groups. Blue and black-colored MPs having <500 μm and <500 μm-1 mm size were found dominantly in Crustacea and Mollusca, respectively. Polypropylene was recorded as the dominant plastic polymer in both Crustacea and Mollusca. In essence, this review has provided a comprehensive insight into MP concentration in Crustacea and Mollusca of Asia, highlighting variations among species and geographic locations. This understanding is crucial for tackling urgent environmental challenges, safeguarding human health, and promoting global sustainability initiatives amid the escalating issue of plastic pollution. PRACTITIONER POINTS: Microplastic pollution has created havoc on biodiversity and food safety. A total of 27 and 52 species of crustaceans and Mollusca have been recorded to be contaminated with MPs. Metopograpsus quadridentate and Dolabella auricularia have shown higher MPs contamination. Polypropylene was recorded as the dominant plastic polymer in both crustacean and Mollusca. Findings of pollution indices revealed a very high risk of MP contamination in all the countries.

Microplastics and associated polycyclic aromatic hydrocarbons in surface water and sediment of the Bay of Bengal coastal area, India: sources, pathway and ecological risk

In the aquatic environment around the world, microplastic contamination has been a common and ongoing issue. Particularly, the ability of microplastics to absorb persistent organic pollutants (POPs) and then transmit these POPs to aquatic creatures has attracted a lot of interest. A stereomicroscope was used to detect the size, shape, and color of the microplastics (MPs), and Fourier Transform Infrared (FTIR) spectroscopy was used to identify the polymer composition of the MPs. To address MP transit, destiny, and mitigation, a study of MP pollution coastal areas is required. In the current study, MP pollution in the collected sample from upper layer of water and sediment of the Digha and Puri beaches along the coast of BOB was evaluated. The average concentration with SD of MPs observed in water was 5.3 ± 1.8 items/L whereas, in sediments, it was 173.4 ± 40.1 items/kg at Digha beach. The mean MPs abundance in the Puri beach was 6.4 ± 1.7 items/L in the water and 190.4 ± 28.0 items/kg in the sediments. The investigated total 16-PAHs concentrations were 164.7 ng/g, 121.9 ng/g, 73.6 ng/g, and 101.3 ng/g on the MPs surface of foam, fragment, fibers, and film respectively in the studied MPs sample. Smaller than 1000 µm size of MPs are distributed in the largest concentration. Fibers, films, fragments, and foam were the most common shapes of MPs. The molecular structure of MPs in water and sediment samples was analysed i.e., polyesters (PEs), polypropylene (PP), polyethylene (PE), polymethyl methacrylate (PMMA), polystyrene (PS), polyamide (PA), polycarbonates (PC), and polyurethane (PU). The obtained result offers an accurate assessment of the PLI, and the investigated polymer facilitates determining the polymer hazard levels, which emphasizes the risk associated with it.

Regulatory Science Perspective on the Analysis of Microplastics and Nanoplastics in Human Food

Microplastics are increasingly reported, not only in the environment but also in a wide range of food commodities. While studies on microplastics in food abound, the current state of science is limited in its application to regulatory risk assessment by a continued lack of standardized definitions, reference materials, sample collection and preparation procedures, fit-for purpose analytical methods for real-world and environmentally relevant plastic mixtures, and appropriate quality controls. This is particularly the case for nanoplastics. These methodological challenges hinder robust, quantitative exposure assessments of microplastic and nanoplastic mixtures from food consumption. Furthermore, limited toxicological studies on whether microplastics and nanoplastics adversely impact human health are also impeded by methodology challenges. Food safety regulatory agencies must consider both the exposure and the risk of contaminants of emerging concern to ascertain potential harm. Foundational to this effort is access to and application of analytical methods with the capability to quantify and characterize micro- and nanoscale sized polymers in complex food matrices. However, the early stages of method development and application of early stage methods to study the distribution and potential health effects of microplastics and nanoplastics in food have largely been done without consideration of the stringent requirements of methods to inform regulatory activities. We provide regulatory science perspectives on the state of knowledge regarding the occurrence of microplastics and nanoplastics in food and present our general approach for developing, validating, and implementing analytical methods for regulatory purposes.

The Occurrence of Microplastics in Donax trunculus (Mollusca: Bivalvia) Collected along the Tuscany Coast (Mediterranean Sea)

Microplastics (MPs) (0.1 µm-5 mm particles) have been documented in oceans and seas. Bivalve molluscs (BMs) can accumulate MPs and transfer to humans through the food chain. BMs (especially mussels) are used to assess MPs' contamination, but the genus Donax has not been thoroughly investigated. The aim of this study was to detect and characterize MPs in D. trunculus specimens collected along the Tuscan coast (Italy), and to assess the potential risk for consumers. The samples (~10 g of tissue and intervalval liquid from 35 specimens) were digested using a solution of 10% KOH, subjected to NaCl density separation, and filtered through 5 μm pore-size filters. All items were morphologically classified and measured, and their mean abundance (MA) was calculated. Furthermore, 20% of them were analyzed by Raman spectroscopy and, based on the obtained results, the MA was recalculated (corrected MA) and the annual human exposure was estimated. In the 39 samples analyzed, 85 items fibers (n = 45; 52.94%) and fragments (n = 40; 47.06%) were found. The MA was 0.23 ± 0.17 items/grww. Additionally, 83.33% of the items were confirmed as MPs (polyethylene and polyethylene terephthalate). Based on the correct MA (0.18 MPs/grww), D. trunculus consumers could be exposed to 19.2 MPs/per capita/year. The health risk level of MPs was classified as level III (moderate).

Characteristics and potential human health risks of microplastics identified in typical clams from South Yellow Sea Mudflat

The ingestion of clams (Meretrix) with microplastics (MP) contamination could pose potential risk to human health. The characteristics and potential risks of MP identified in wild-clam and farm-clam from South Yellow Sea Mudflat were studied comprehensively in this paper. The results indicated that MP were identified in both wild-clam (3.4-21.3 items/individual, 2.11-10.65 items/g) and farm-clam (1.3-20.8 items/individual, 0.62-8.67 items/g) among 21 sampling sites along South Yellow Sea Mudflat. The MP abundance of clams from marine estuarine or coast ports were significantly higher than those from purely marine coast mudflat, implying that environmental habitats played an important role on MP characteristics. MP abundance were significantly and positively related to shell length, shell height, shell width and soft tissue wet weight by Pearson test, suggesting the bigger the shell, there existed more MP abundance. Among MP in wild-clams and farm-clams, fragment, fiber were most abundant MP shapes, most MP's sizes were lower than 0.25 mm, the predominant colors were black, red, blue and transparent, chlorinated polyethylene (CPE) was the major polymer. Additionally, estimated dietary intake (EDI) of MP for adults via consumption of wild-clam and farm-clam were 1123.33 ± 399.97 and 795.07 ± 326.72 items/kg/year, respectively, suggesting EDI values of wild-clams were higher than those of farm-clams, and MP intake via wild-clam consumption were more than that via farm-clam consumption. The polymer risk indexes (PRI) of MP in total tissue and digestive system for wild-clam were 1297.8 ± 92.15 (hazard level: IV ~ V), 1038 ± 69.55 (IV ~ V), respectively, while PRI of MP in total tissue and digestive system for farm-clam were 979.92 ± 75.45 (III ~ IV), 735 ± 47.78 (III ~ IV), respectively, implying that PRI and hazard level of MP from wild-clam were higher than those from farm-clam, and the potential risks would decrease greatly when digestive systems of clams are removed during ingestion.

Seasonal variation in the abundance of microplastics in three commercial bivalves from Bandon Bay, Gulf of Thailand

This study investigated the abundance of microplastics in three commercial bivalves found at Bandon Bay. Spatial-temporal differences in the concentration of microplastics were evaluated during the dry and wet seasons. The results showed that the highest abundance of microplastics in oysters, blood cockles, and green mussels was observed in fishery and aquaculture areas during the dry season, with 1.42 particles/g (w/w), 1.01 particles/g (w/w) and 0.87 particles/g (w/w), respectively. Microplastics were more abundant during the dry season compared to the wet season (p < 0.05), with fibre being the predominant shape and black being the major colour of particles. Cellophane was the most common type of polymer in all bivalves. This result is an important reference for understanding the status of microplastics in three commercial bivalves during different seasons and in different human activities, which should aid in understanding the sources of microplastics in Bandon Bay.

Multiple species ingest microplastic but few reflect sediment and water pollution on sandy beaches: A baseline for biomonitoring

Databases recording the ingestion of microplastics by marine animals are growing. This is also recurrent on sandy beaches, where different biomonitors have been proposed to monitor the impacts of plastic pollution. We aimed to record the occurrence of suspected microplastic (SMP) in the digestive tract of multiple taxa (n = 45 identified species) and test whether some macroinvertebrates and fishes ingested SMPs proportionally with the pollution level of sediment and water; thus, we aimed to depict which sandy beach species could be used as biomonitors. Among all taxa, 10 macroinvertebrates and 12 fish species were reported to ingest SMP for the first time. SMP morphotypes proportion differed between abiotic and biotic compartments. Moreover, 10 of 12 taxa did not have SMP concentration linearly related with SMP in sediment and water. Our findings suggest that few species from sandy beaches can be used as efficient biomonitors, although almost all ingest plastic polymers.

Microplastics (MPs) in marine food chains: Is it a food safety issue?

The enormous usage of plastic over the last seven decades has resulted in a massive quantity of plastic waste, much of it eventually breaking down into microplastic (MP) and nano plastic (NP). The MPs and NPs are regarded as emerging pollutants of serious concern. Both MPs and NPs can have a primary or secondary origin. Their ubiquitous presence and ability to sorb, desorb, and leach chemicals have raised concern over their presence in the aquatic environment and, particularly, the marine food chain. MPs and NPs are also considered vectors for pollutant transfer along with the marine food chain, and people who consume seafood have began significant concerns about the toxicity of seafood. The exact consequences and risk of MP exposure to marine foods are largely unknown and should be a priority research area. Although several studies have documented an effective clearance mechanism by defecation, significant aspect has been less emphasized for MPs and NPs and their capability to translocate in organs and clearance is not well established. The technological limitations to study these ultra-fine MPs are another challenge to be addressed. Therefore, this chapter discusses the recent findings of MPs in different marine food chains, their translocation and accumulations potential, MPs as a critical vector for pollutant transfer, toxicology impact, cycling in the marine environment and seafood safety. Besides, the concerns and challenges that are overshadowed by findings for the significance of MPs were covered.

Determining the Properties that Govern Selective Ingestion and Egestion of Microplastics by the Blue Mussel (Mytilus edulis) and Eastern Oyster (Crassostrea virginica)

Suspension feeding bivalve molluscs interact with different types of microplastics (MP) suspended in the water column. Most bivalves are selective suspension feeders and, thus, do not consume all particles to which they are exposed. Selection depends upon the physicochemical properties and size of the particle. Recent work has provided evidence that blue mussels, Mytilus edulis, and eastern oysters, Crassostrea virginica, ingest and egest microspheres (polystyrene) and microfibers (nylon) differently, but whether other factors, such as polymer type and shape, mediate selection have not been explored. To investigate these factors, mussels and oysters were offered similar sized nylon (Ny) and polyester (PES) microfibers or polyethylene (PE) and polystyrene (PS) microspheres, or different sized PES microfibers during a 2 h exposure. Feces and pseudofeces were collected separately and analyzed for MPs, and the data were used to develop a linear regression model for selection. Results demonstrated clear species-specific differences in the efficiency of particle selection. Both mussels and oysters, however, exhibited size-based rejection of PES microfibers, ingesting a higher proportion of shorter fibers than longer fibers. Polymer type did not impact selection of fibers or spheres. The relative size of particles (area and perimeter) was found to be the most important factor in predicting whether a MP will be rejected or ingested.

Spatial, seasonal and ecological risk assessment of microplastics in sediment and surface water along the Thoothukudi, south Tamil Nadu, south east India

Microplastics are a widespread environmental contaminant that raises serious concern for aquatic organisms. Hence, the present study was conducted to investigate the spatial and seasonal variation of microplastics, their characteristics, polymer types and the risk assessment caused by the microplastics in six sampling sites along the Thoothukudi region. The average microplastic abundance ranged from 32 ± 26 to 232 ± 229 items/kg and 54 ± 41 to 619 ± 377 items/l in sediment and surface water, respectively, and they exhibited a significant spatial difference among the sampling sites. The microplastic abundance also showed a significant difference among the seasons with the monsoon significantly recording the highest mean microplastic abundance in sediment (160 ± 130 items/kg) and surface water (454 ± 374 items/l). In sediment and surface water, fragment (sediment: 52.72%, surface water: 40.89%), 0.5-1 mm (sediment: 43.96%, surface water: 31.11%) and blue-coloured (sediment: 52.33%, surface water: 41.85%) microplastics were dominant with no significant difference both spatially and seasonally. Polyethylene, the dominant polymer, was observed in both the sediment and surface water, accounting for about 47.58% and 49.83%, respectively, and it showed no significant difference among the selected sites. This signifies that they are homogenously distributed along the coast and further suggests that these particles persisted in the sediment and surface water for a longer period of time. The results of the polymer hazard index show that the sediment (PHI = 1181.63) and surface water (PHI = 1018.66) were severely contaminated (hazard level V) with microplastic polymers such as PE, PP, PS, PET and PA. It was also found that the degree of the microplastic contamination in sediment (PLI = 3.57) and surface water (PLI = 3.84) was lower (hazard level I). The overall risk index (RI) for sediment (253.48) and surface water (444.74) falls under the higher risk category. From the correlation analysis, a significantly positive relationship was observed between microplastics in sediment and surface water based on each classification (abundance, shape, size, colour and polymer). This suggests that microplastics rejoin the water column from the sediment through resuspension, which occurs due to the circulation, tides and sedimentation rate. This might be the reason for the higher microplastic abundance in the surface water than in the sediment. As a result, proper management measures to reduce plastic waste disposal in the marine environment should be implemented to lessen the effects of microplastics on marine biota and on public health.

Effects of cooking methods on microplastics in dried shellfish

Many studies have reported the occurrence of microplastics in live shellfish intended for human consumption. However, far fewer studies have been conducted on dried shellfish from supermarkets or fishery markets. In this study, the characteristics of microplastics in six kinds of dried shellfish products following different cooking treatments were investigated. Dietary exposure to microplastics in dried shellfish was estimated using the consumption rate of seafood among different age groups. Microplastics were detected in all the uncooked, dried shellfish products, ranging from 0.3 to 4.2 items/g. Fibres accounted for more than 80% of microplastics in razor clams, winkles, and scallops. The proportion of microplastics smaller than 1 mm in size ranged from 57.1% to 89.7% of the total microplastics found in dried shellfish. The polymer types included polyethylene terephthalate (PET), rayon, polyester, nylon, polypropylene (PP), cellophane (CP), and polyethylene (PE). Principal component analysis (PCA) showed that the sizes and shapes of microplastics in scallops were more susceptible to alteration by different cooking methods. Steaming and frying significantly reduced the abundance of microplastics in razor clams. In addition, significantly fewer microplastics were found in scallop products after boiling and steaming than were found in fried scallop products. The estimated dietary intake of microplastics for infants was the highest among the age groups considered (3.05 items/kg(bw)/day). Accordingly, frying was suggested for cooking mussels, boiling for clams and winkles, and steaming for scallops. Combining risks from ingesting plastics and plastic additives, steaming is suggested as the best method to cook shellfish.

Effects of a microplastic mixture differ across trophic levels and taxa in a freshwater food web: In situ mesocosm experiment

The ubiquitous presence of microplastics (MP) in aquatic ecosystems can affect organisms and communities in multiple ways. While MP research on aquatic organisms has primarily focused on marine ecosystems and laboratory experiments, the community-level effects of MP in freshwaters, especially in lakes, are poorly understood. To examine the impact of MP on freshwater lake ecosystems, we conducted the first in situ community-level mesocosm experiment testing the effects of MP on a model food web with zooplankton as main herbivores, odonate larvae as predators, and chironomid larvae as detritivores for seven weeks. The mesocosms were exposed to a mixture of the most abundant MP polymers found in freshwaters, added at two different concentrations in a single pulse to the water surface, water column and sediment. Water column MP concentrations declined sharply during the first two weeks of the experiment. Contrary to expectations, MP ingestion by zooplankton was low and limited mainly to large-bodied Daphnia, causing a decrease in biomass. Biomass of the other zooplankton taxa did not decrease. Presence of MP in the faecal pellets of odonate larvae that fed on zooplankton was indicative of a trophic transfer of MP. The results demonstrated that MP ingestion varies predictably with MP size, as well as body size and feeding preference of the organism, which can be used to predict the rates of transfer and further effects of MP on freshwater food webs. For chironomids, MP had only a low, short-term impact on emergence patterns while their wing morphology was significantly changed. Overall, the impact of MP exposure on the experimental food web and cross-ecosystem biomass transfer was lower than expected, but the experiment provided the first in situ observation of MP transfer to terrestrial ecosystems by emerging chironomids.

Widespread microplastic pollution across the Caribbean Sea confirmed using queen conch

The Caribbean Sea is reported to have one of the highest levels of plastic pollution of any marine ecosystem. Much less is known about the levels of microplastics as an emerging pollutant in the marine environment, especially in the water column and benthic substrates where they can be easily ingested by marine organisms. This study was carried out to quantify marine microplastics in the Wider Caribbean using the mollusk, queen conch (Aliger gigas). We analyzed feces collected from queen conch, a non-lethal method of sampling, to investigate microplastic pollution in eleven sites across the Wider Caribbean. Microplastics were extracted by degradation of organic matter from feces with peroxide (30%) over 48 h. Microplastics were then analyzed by stereomicroscope and scanning electron microscope. Microplastics were found to be present in the feces of all 175 queen conch sampled, and in statistically different abundances among sites, but with no obvious geographical pattern. The highest and lowest levels were found in Central America; the highest being in Belize (270 ± 55 microplastics/queen conch) and Alacranes, Mexico (203 ± 29 microplastics/queen conch), whilst the lowest levels were found in Puerto Morelos, Mexico. Fibers, mostly between 1000 and 1500 μm in size, were the most frequent microplastic particle types at every site and represented between 60 and 98% of all microplastic particles found. Our results suggest that the use of queen conch feces is a suitable method for detecting benthic microplastic pollution, and have confirmed that microplastic pollution of marine benthos is widespread across the Wider Caribbean.

The wedge clam Donax trunculus L., 1758 as a bioindicator of microplastic pollution

This study describes the use of D. trunculus as a bioindicator of microplastic (MPs) pollution due to beach urbanization related to the development of the Taghazout Bay tourist resort in Morocco. In six sites located on the coast, MPs densities ranged from 1.75 to 5.93 items per gram of D. trunculus wet weight. MPs contamination was significantly influenced spatiotemporally by the urbanization degree in the area. The shapes found were fibers (90.5%) and fragments (9.5%). The Fourier Transform Infrared Spectroscopy (FTIR) analysis reported two polymers: polyethylene (65%) and polypropylene (35%). MPs colors were dark and light, with a predominance of light blue (23.8%). The species ingested different sizes of MPs, mainly the 0.1 and 0.5 mm fractions. Scanning Electron Microscope coupled with an energy dispersive X-ray analyzer (SEM/EDX) revealed weathered MPs with chemical elements adhered to their surface (Cu, Fe, Mg, S, Cl, etc.). The results of this study recommend the use of D. trunculus as a new bioindicator of MPs pollution following an urban change in the coastal scenery. Also, a sustainable coastal management must be implemented in the study area.

Litter and plastic monitoring in the Indian marine environment: A review of current research, policies, waste management, and a roadmap for multidisciplinary action

Environmental contamination due to plastic waste mismanagement is a growing global concern. Plastic problem is of particular concern to the Indian Ocean nations as Asia currently contributes to the highest share of mismanaged plastic waste. Consequently, there is a worldwide interest to understand the distribution and transboundary movement of plastic from this region, which is crucial for implementing management measures. This review article focuses on current knowledge of plastic research, policies, waste management, socio-economics, challenges, and research opportunities. To date, marine plastic studies have focused on a few locations, providing an analysis of distribution and plastic-organism interactions in the Indian marine system. Along with scientific investigation, enforcement, improvisation, and, if necessary, framing new policies, integrated technologies to manage plastic waste, and behavioural changes are essential to mitigate plastic pollution. Such measures will be effective through a combination of actions among national and international researchers, industries, environmental managers, and the public.

Immunotoxicity of Perfluorooctanoic Acid to the Marine Bivalve Species Ruditapes philippinarum

Polyfluorinated alkylated substances are recognized as an important class of pollutants in marine environments. Bivalves are good model organisms for evaluating the toxicity of pollutants and monitoring marine environments. In the present study, immunotoxicity of perfluorooctanoic acid (PFOA) was investigated by measuring biomarkers of the immune profile of Ruditapes philippinarum. In bivalves, hemocytes are an important component of the immune system. Thus, hemocyte proliferation, phagocytosis, cell viability, and immune enzyme activities, which have been applied as marine pollution bioindicators, were identified and observed for changes after exposure to PFOA in R. philippinarum. Based on the integrated biomarker responses method, we selected five biomarkers to evaluate PFOA risk at the multibiomarker level. In addition, the histopathological alterations of hemocytes in bivalves were used as indexes of the response to environmental stress. The subcellular structure of the hemocytes in R. philippinarum changed significantly with PFOA exposure, including hemocyte and nucleus morphological changes, organelle dissolution, cytomembrane and karyotheca swelling, and cytoplasm vacuolization. The present study verifies PFOA immunotoxicity to R. philippinarum at different levels and the integrated assessment of stress levels caused by PFOA in marine environment. Our results will provide new insights into evaluating adverse effects of PFOA and monitoring marine ecosystem. Environ Toxicol Chem 2022;41:426-436. © 2021 SETAC.

Anthropogenic fibres in white clams, Meretrix lyrata, cultivated downstream a developing megacity, Ho Chi Minh City, Viet Nam

Anthropogenic fibres are an emerging pollutant worldwide. The Can Gio mangrove area is located downstream of the Saigon River, and is characterised by high level of anthropogenic fibres originating from domestic and industrial textile and apparel manufacturing. In this area, biota is thus subjected to a high potential risk of anthropogenic fibre contamination. This study aims to characterise the accumulation of anthropogenic fibres in different tissues, i.e. gills, digestive systems, and remaining tissues, of white clams (Meretrix lyrata) cultivated in the Can Gio beach sand, during a seven-month sampling period. The results showed an average concentration of 3.6 ± 2.1 fibres individual^-1 or 2.7 ± 2.4 fibres g^-1 ww. Higher fibre accumulation was observed in remaining tissues than in gills and digestive systems, and no temporal variation was observed in all clam tissues. The intake of fibres by humans consuming clams was estimated to be 324 fibres inhabitant^-1 yr^-1.

Microplastics as contaminants in Indian environment: a review

The increased production and consumption scale of plastic items has led to the generation of microplastics (MPs), an emerging class of contaminants, in our environment. MPs are plastic particles less than 5 mm in size and could originate due to primary and secondary sources. The primary ones are generated as such in the MP size range while the secondary MPs are a result of fragmentation of larger plastic particles which eventually enters the aquatic, terrestrial and atmospheric environments. The increasing concern of MP pollution in every compartment of our environment is being globally explored, with relatively fewer studies in India. Among the total studies published on MP prevalence in the Indian environments, marine systems have received significantly higher attention compared to the other compartments like freshwater, atmosphere, terrestrial and human consumables. This review article is an effort to present current understanding of MP pollution in aquatic systems, terrestrial systems, atmosphere and human consumables of India by reviewing available scientific literature. Along with this, the review also focuses on identification of the gap areas in current knowledge and highlights way forward for future research. This would further help in meeting the goals of this emergent pollutant management.

Concentration of microplastics in bivalves of the environment: a systematic review

The aim of this review was to identify the current knowledge regarding the concentration of microplastics in bivalves in the marine, estuarine, and freshwater environments. For this purpose, researches were conducted from September 2020 to February 2021 in the Scopus, Web of Science, and Google scholar databases, following a meticulous selection of articles. To comprehensively understand the selected articles, an extensive review was carried out in order to identify the methodologies employed, sampling sites, species evaluated, characteristics of the microplastics (concentrations, shapes, sizes, and polymers) and their relationship with the concentration of this particles in the environment. A total of 93 articles were selected, with an exponential growth in the number of articles from April 2014 to February 2021. Worldwide, 80 articles were realized in the Northern Hemisphere and thirteen in the Southern Hemisphere. The samplings of organisms were carried out in 36 countries, besides one in Antarctica. The concentration of microplastics were studied in 70 species, with mussels Mytilus spp. and the oysters Crassostrea spp. being the main genus studied. Due to the different methodologies used to digest the tissues of organisms and identify microplastics and species, it is difficult to make comparisons between the results of different studies. In addition, data on the concentrations of microplastics in the environment, as well as their composition and characteristics, are needed, enabling the verification of relationships with the concentrations identified in organisms, which does not occur in most studies. Thus, we suggest an increase in the number of studies to be realized in the southern hemisphere, future studies use the same methodology of digestion, the polymer identification of microplastics and samplings of the surrounding environment, enabling a greater comparison between studies.

Improved Raman spectroscopy-based approach to assess microplastics in seafood

Microplastics represent an emerging environmental issue and have been found almost everywhere including seafood, raising a great concern about the ecological and human health risks they pose. This study addressed the common technical challenges in the assessment of microplastics in seafood by developing an improved protocol based on Raman spectroscopy and using the green-lipped mussel Perna viridis and the Japanese jack mackerel Trachurus japonicus as the test models. Our findings identified a type of stainless-steel filter membranes with minimal Raman interference, and a combination of chemicals that achieved 99-100% digestion efficiency for both organic and inorganic biomass. This combined chemical treatment reached 90-100% recovery rates for seven types of microplastics, on which the surface modification was considered negligible and did not affect the accuracy of polymer identification based on Raman spectra, which showed 94-99% similarity to corresponding untreated microplastics. The developed extraction method for microplastics was further combined with an automated Raman mapping approach, from which our results confirmed the presence of microplastics in P. viridis and T. japonicus collected from Hong Kong waters. Identified microplastics included polypropylene, polyethylene, polystyrene and poly(ethylene terephthalate), mainly in the form of fragments and fibres. Our protocol is applicable to other biological samples, and provides an improved alternative to streamline the workflow of microplastic analysis for routine monitoring purposes.

Abundance, composition, and fate of microplastics in water, sediment, and shellfish in the Tapi-Phumduang River system and Bandon Bay, Thailand

Microplastic contamination in the environment is a global problem, as evidenced by the increasing amount of research worldwide. To our knowledge, this study is the first to investigate the microplastic distribution in Bandon Bay, one of the most important maricultural areas of Thailand. Water and sediment samples from the Tapi-Phumduang River system (n = 10) and Bandon Bay (n = 5) were collected. Water sampling at the river mouth was carried out during a complete tidal cycle to estimate the microplastic flux to the bay during the wet season. Moreover, two commercial bivalve species grown in the bay, the green mussel (Perna viridis) and lyrate Asiatic hard clam (Meretrix lyrata), were analyzed. More items of microplastics were found in the river system than in the bay. During the tide cycle, one-third of the microplastics entering the bay were washed back upstream during high tide. This backflow consisted mainly of larger microplastics. The average daily load of microplastics to the bay was 22.4 × 10⁹ items day^-1. The load during low tide was approximately 4-5 times higher than that during high tide. The overall accumulation of microplastics in the bottom sediments of the river and in the bay was similar (p < 0.05). Green mussels showed significantly higher contamination with microplastics than clams. Notably, the small-sized shellfish contained more particles (items/g) than the large ones (p < 0.05). Fibers were detected in virtually all samples: water (98%), sediment (94%), mussels (100%), and clams (95%). Among these, microfibers (<1 mm) were detected in water (71%), sediment (63%), green mussels (63%), and clams (52%). Blue and white particles were the two most frequently observed colors, while the most dominant polymers were rayon, followed by polypropylene (PP) or polyethylene (PE), polyethylene terephthalate (PET), and nylon. To this end, we posit that river discharge was a significant source of microplastics in Bandon Bay, with minor additional contributions from fishing and mariculture activities within the bay. Ultimately, these microplastics may end up in the sediments and living organisms.

A comprehensive review on assessment of plastic debris in aquatic environment and its prevalence in fishes and other aquatic animals in India

The presence of meso, macro, and microplastics (MPs) in aquatic environments has raised concerns due to their potential risks to aquatic as well as human life. Though plastics are considered to be inert in nature, MPs with toxic additives and accumulated contaminants have harmful ecological effects. Reports of absorption of MPs by internal tissues and toxicity in vital organs such as lung cells, liver, and brain cells have proved its serious health hazards. The study of plastic debris in the aquatic environment deserves special attention due to its ecotoxicological impact. This review presents a detailed account of the assessment of plastic debris in marine as well as freshwater environments. The formation of MPs and their sources, sampling, isolation, identification and characterization methods adopted, and the prevalence of MPs in aquatic life are discussed. To the best of our knowledge, the present article is a first-ever comprehensive review covering the entire of India. Our review finds that, so far, very few studies have been carried out, and there is a paucity of information, especially on the prevalence of plastic debris in the freshwater environment, fish, and other aquatic animals in India. While major studies have been done at various coastal locations in the southern part of India and a few studies in the rest of India, south-eastern states remain neglected. Toxicological studies on various life forms, including humans, are lacking. The present review also fills the gap in our knowledge of the various locations studied across India and can guide future research.