Green synthesis of metal-based nanoparticles for sustainable agriculture

Study on the preparation of sterile noble metal nanoparticles and hydrotalcite layered nanoparticles by innovative high pressure sterilization method

We have developed an innovative nanoparticle preparation technique. It utilised a high-pressure steam sterilisation pot as the reaction equipment, simplifying biomedical nanoparticle synthesis and sterilisation processes. Gold nanoparticles (AuNPs), silver nanoparticles (AgNPs), and two types of hydrotalcite-layered nanoparticles (LDHs) were prepared successfully. The nanoparticles had a regular morphology and good dispersion, which is consistent with the characteristics of products prepared using traditional methods. The average particle sizes of AuNPs and AgNPs were 25 and 38 nm. Ultraviolet absorption peaks of AuNPs and AgNPs were observed at 520 and 436 nm, respectively. The average particle sizes of the LDHs used for anion and cation intercalation were 82 and 90 nm, respectively. The elemental composition of the LDHs included Co, Mg, Al, C, and O. Functional group characterisation results showed that the surfaces of the four nanoparticles contained abundant functional groups. The high-pressure sterilisation method used in this study produced sterile nanoparticles with good performance in a single step. It avoided the problems associated with the physicochemical property changes in the nanoparticles caused by the secondary sterilisation operations, thereby ensuring their usability in biomedical applications. Thus, the method provides a scalable synthesis pathway for nanotechnology and inspiration for further research on nanotechnology.

Green synthesized metal nanoparticles appear to meet expectations of low ecotoxicity: what about genotoxicity?

Advancements in technology and industry have made the use of nanomaterials indispensable. Due to concerns about the environmental damage caused by classical synthesis methods (Classical Synthesis, CS), the alternative 'Green Synthesis Method' (GS) has been developed, which aims to reduce toxicity by using environmentally friendly materials. This study examines whether nanoparticles synthesized through GS exhibit lower genotoxicity. To this end, research articles published between 2005 and 2025 on nanoparticle synthesis using the GS method were reviewed, and 551 studies were analyzed. The evaluation focused on gold, silver, platinum, copper, iron, and cobalt nanoparticles, which are widely used in various applications. The findings suggest that the GS method offers advantages in terms of genotoxicity. Additionally, this paper provides an in-depth analysis of how the GS method influences the properties of nanoparticles and explores the genotoxic mechanisms of nanoparticles synthesized through this approach.

Nanofertilizers for Sustainable African Agriculture: A Global Review of Agronomic Efficiency and Environmental Sustainability

As Africa's population continues to grow, the need for sustainable agricultural practices has intensified, sparking greater interest in nanofertilizers This review critically evaluates the agronomic efficiency and environmental sustainability of nanofertilizers in the African context. It combines existing research on nanofertilizers' effectiveness, nutrient-use efficiency, and environmental impact. Nanofertilizers have shown a nutrient-use efficiency boost of up to 30% compared to conventional fertilizers. This review also highlights benefits such as enhanced crop yields (up to 25% increase in maize production), reduced chemical fertilizer requirements (up to 40% reduction in nitrogen application), and improved soil health. The analysis informs policy, research, and practice aimed at optimizing nanofertilizer deployment for sustainable African agriculture. The projected global population of 2.4 billion by 2050 highlights that the need for sustainable agricultural solutions has never been more important. Our review conveys an assessment of nanofertilizers' potential contribution to Africa's agricultural sustainability and food security.

Adsorption performance with field emission scanning electron microscopy of fruit peel induced Silver Nanoparticles in C16H18ClN3S for waste water treatment

There is a growing demand for cost-effective and sustainable technologies for treating wastewater as water consumption increases and conventional technologies become more expensive. Nanoparticles have a great deal of potential for use in the treatment of waste water. Their unique surface area allows them to effectively remove toxic metal ions, pathogenic microorganisms, organic and inorganic solutes from water. This study investigated the potential of orange and banana peels as renewable nano adsorbents for removing dyes and dissolved organic compounds from textile wastewater. Orange and banana peels are an optimal selection due to their favourable chemical characteristics, namely the presence of cellulose, pectic, hemicellulose, and lignin. Their capacity to adsorb diverse anionic and cationic compounds on their surface-active sites is attributed to their unique functional group compositions. Silver nanoparticles are able to adsorb heavy metals due to their exceptionally low electrical and thermal resistance and surface plasmon resonance. The samples were thoroughly characterised using field emission scanning electron microscopy (FESEM), UV-Visible spectrometry, Fourier transform infrared spectroscopy (FTIR) and XRD. The nanoparticles were prepared (10 gm,50 gm,100 gm) and subsequently introduced to the wastewater sample. The optical density values were recorded at various time points. The optical density values demonstrate a decline over the course of the experiment, with a notable decrease observed over time. The results of this study provide valuable insights into the efficacy of these natural adsorbents and their potential for sustainable water purification technologies. For the purpose of this research, high performance instrumentation methods were performed as follows:•Field emission scanning electron microscopy for surface morphology studies.•Gas chromatography-mass spectrometry (GC-MS) for analytical technique that combines gas chromatography (GC) and mass spectrometry (MS) to identify unknown substances or contaminants.•Optical density values were measured for different timings of degradation.

Strategies and bibliometric analysis of legumes biofortification to address malnutrition

MAIN CONCLUSION

Biofortification of legumes using diverse techniques such as plant breeding, agronomic practices, genetic modification, and nano-technological approaches presents a sustainable strategy to address micronutrient deficiencies of underprivileged populations. The widespread issue of chronic malnutrition, commonly referred to as "hidden hunger," arises from the consumption of poor-quality food, leading to various health and cognitive impairments. Biofortified food crops have been a sustainable solution to address micronutrient deficiencies. This review highlights multiple biofortification techniques, such as plant breeding, agronomic practices, genetic modification, and nano-technological approaches, aimed at enhancing the nutrient content of commonly consumed crops. Emphasizing the biofortification of legumes, this review employs bibliometric analysis to examine research trends from 2000 to 2023. It identifies key authors, influential journals, contributing countries, publication trends, and prevalent keywords in this field. The review highlights the progress in developing biofortified crops and their potential to improve global nutrition and help underprivileged populations.

Nanotechnology in sustainable agriculture: A double-edged sword

Nanotechnology is a rapidly developing discipline that has the potential to transform the way we approach problems in a variety of fields, including agriculture. The use of nanotechnology in sustainable agriculture has gained popularity in recent years. It has various applications in agriculture, such as the development of nanoscale materials and devices to boost agricultural productivity, enhance food quality and safety, improve the efficiency of water and nutrient usage, and reduce environmental pollution. Nanotechnology has proven to be very beneficial in this field, particularly in the development of nanoscale delivery systems for agrochemicals such as pesticides, fertilizers, and growth regulators. These nanoscale delivery technologies offer various benefits over conventional delivery systems, including better penetration and distribution, enhanced efficacy, and lower environmental impact. Encapsulating agrochemicals in nanoscale particles enables direct delivery to the targeted site in the plant, thereby reducing waste and minimizing off-target effects. Plants are fundamental building blocks of all ecosystems and evaluating the interaction between nanoparticles (NPs) and plants is a crucial aspect of risk assessment. This critical review therefore aims to provide an overview of the latest advances regarding the positive and negative effects of nanotechnology in agriculture. It also explores potential future research directions focused on ensuring the safe utilization of NPs in this field, which could lead to sustainable development. © 2024 Society of Chemical Industry.

Harnessing barley grains for green synthesis of gold and silver nanoparticles with antibacterial potential

The continuous evolution and significance of green resources-based nanomaterials have spurred the exploration of sustainable sources for nanoparticle production. Green synthesis routes offer eco-friendly methodologies, ensuring nanoparticle stability and monodispersity, enhancing their efficiency for various applications. Notably, the thick biological corona layer surrounding nanoparticles (NPs) synthesized through green routes contributes to their unique properties. Consequently, there has been a surge in the development of NPs synthesis methods utilizing medicinal plants and diverse agricultural and waste resources. This study highlights the sustainable potential of barley grains for the synthesis of gold nanoparticles (Barley-AuNPs) and silver nanoparticles (Barley-AgNPs) as an environmentally friendly alternative, followed by NPs characterizations and their application against pathogenic bacteria: Escherichia coli UTI 89 and Pseudomonas aeruginosa PAO1. The rapid synthesis of Barley-AuNPs within 20 min and Barley-AgNPs within 30 min at 90 °C underscores the efficiency of barley as a green precursor. Characterization through advanced techniques, including SEM, TEM, EDS, AFM, DLS, FT-IR, MALDI-TOF, and sp-ICPMS, reveals the 20-25 nm size for Barley-AuNPs, while Barley-AgNPs demonstrate 2-10 nm size with spherical monodispersity. A notable contribution lies in the stability of these NPs over extended periods, attributed to a thick biological corona layer. This corona layer, which enhances stability, also influences the antimicrobial activity of Barley-AgNPs, presenting an intriguing trade-off. The antimicrobial investigations highlight the significant potential of Barley-AgNPs, with distinct minimum bactericidal concentrations (MBC) against P. aeruginosa and E. coli at 8 µg/mL. Overall, this research pioneers the use of barley grains for nanoparticle synthesis and unveils these nanoparticles' unique characteristics and potential antibacterial applications, contributing to the evolving landscape of sustainable nanotechnology.

Investigation of the effects and mechanisms of manganese-based NMs on rice growth

Manganese-based (Mn-based) nanomaterials (NMs) have great potential as alternatives to conventional Mn fertilizers. Yet, its environmental risks and effects on plant growth are not completely well understood. This study investigated the physiological effects of manganese dioxide (MnO2) and manganese tetroxide (Mn3O4) NMs on inter-root exposure (0-500 mg/L) of hydroponically grown rice. The results showed that on inter-root exposure, 50 mg/L Mn-based NMs promoted the uptake of mineral elements and enhanced the enzymatic activities of antioxidant systems (CAT and SOD) in rice, whereas 500 mg/L Mn3O4 NMs disrupted the mineral element homeostasis and led to phytotoxicity. The promotion effect of MnO2 NMs was better, firstly because MnO2 NMs treatment had lower Mn content in the plant than Mn3O4 NMs. In addition, MnO2 NMs are more transported and absorbed in the plant in ionic form, while Mn3O4 NMs exist in granular form. MnO2 NMs and Mn3O4 NMs both can be used as nano-fertilizers to improve the growth of rice by inter-root application, but the doses should be carefully selected.

Evaluation of the effect of nanoparticles on the cultivation of edible plants by ICP-MS: a review

Nanoparticle (NP) applications aiming to boost plant biomass production and enhance the nutritional quality of crops hae proven to be a valuable ally in enhancing agricultural output. They contribute to greater food accessibility for a growing and vulnerable population. These nanoscale particles are commonly used in agriculture as fertilizers, pesticides, plant growth promoters, seed treatments, opportune plant disease detection, monitoring soil and water quality, identification and detection of toxic agrochemicals, and soil and water remediation. In addition to the countless NP applications in food and agriculture, it is possible to highlight many others, such as medicine and electronics. However, it is crucial to emphasize the imperative need for thorough NP characterization beyond these applications. Therefore, analytical methods are proposed to determine NPs' physicochemical properties, such as composition, crystal structure, size, shape, surface charge, morphology, and specific surface area, detaching the inductively coupled plasma mass spectrometry (ICP-MS) that allows the reliable elemental composition quantification mainly in metallic NPs. As a result, this review highlights studies involving NPs in agriculture and their consequential effects on plants, with a specific focus on analyses conducted through ICP-MS. Given the numerous applications of NPs in this field, it is essential to address their presence and increase in the environment and humans since biomagnification and biotransformation effects are studies that should be further developed. In light of this, the demand for rapid, innovative, and sensitive analytical methods for the characterization of NPs remains paramount.

Functionalization of niobium nitrogen-doped titanium dioxide (TiO2) nanoparticles with ethanolic extracts of Mentha arvensis

Titanium dioxide (TiO2) nanoparticles have gained significant attention due to their wide-ranging applications. This research explores an approach to functionalize Niobium Nitrogen Titanium Dioxide nanoparticles (Nb-N-TiO2 NPs) with Mentha arvensis ethanolic leaf extracts. This functionalization allows doped NPs to interact with the bioactive compounds in extracts, synergizing their antioxidant activity. While previous studies have investigated the antioxidant properties of TiO2 NPs synthesized using ethanolic extracts of Mentha arvensis, limited research has focused on evaluating the antioxidant potential of doped nanoparticles functionalized with plant extracts. The characterization analyses are employed by Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and Ultraviolet-visible (UV-Vis) spectroscopy to evaluate these functionalized doped nanoparticles thoroughly. Subsequently, the antioxidant capabilities through the 2,2-diphenyl-1-picrylhydrazyl (DPPH) and ferric-reducing antioxidant power (FRAP) assays have been assessed. Within functionalized Nb-N-TiO2, the FTIR has a distinctive peak at 2350, 2010, 1312, 1212, and 1010 cm-1 with decreased transmittance associated with vibrations linked to the Nb-N bond. SEM revealed a triangular aggregation pattern, 500 nm to 2 µm of functionalized Nb-N-TiO2 NPs. Functionalized doped Nb-N-TiO2 NPs at 500 µg mL-1 exhibited particularly robust antioxidant activity, achieving an impressive 79% efficacy at DPPH assessment; meanwhile, ferric reduction efficiency of functionalized doped Nb-N-TiO2 showed maximum 72.16%. In conclusion, doped Nb-N-TiO2 NPs exhibit significantly enhanced antioxidant properties when functionalized with Mentha arvensis ethanolic extract compared to pure Nb-N-TiO2 manifested that doped Nb-N-TiO2 have broad promising endeavors for various biomedicine applications.

Recent Advancements and Unexplored Biomedical Applications of Green Synthesized Ag and Au Nanoparticles: A Review

Green synthesis of silver (Ag) and gold (Au) nanoparticles (NPs) has acquired huge popularity owing to their potential applications in various fields. A large number of research articles exist in the literature describing the green synthesis of Ag and Au NPs for biomedical applications. However, these findings are scattered, making it time-consuming for researchers to locate promising advancements in Ag and Au NPs synthesis and their unexplored biomedical applications. Unlike other review articles, this systematic study not only highlights recent advancements in the green synthesis of Ag and Au NPs but also explores their potential unexplored biomedical applications. The article discusses the various synthesis approaches for the green synthesis of Ag and Au NPs highlighting the emerging developments and novel strategies. Then, the article reviews the important biomedical applications of green synthesized Ag and Au NPs by critically evaluating the expected advantages. To expose future research direction in the field, the article describes the unexplored biomedical applications of the NPs. Finally, the articles discuss the challenges and limitations in the green synthesis of Ag and Au NPs and their biomedical applications. This article will serve as a valuable reference for researchers, working on green synthesis of Ag and Au NPs for biomedical applications.

Recent advances in nano-fertilizers: synthesis, crop yield impact, and economic analysis

The escalating global demand for food production has predominantly relied on the extensive application of conventional fertilizers (CFs). However, the increased use of CFs has raised concerns regarding environmental risks, including soil and water contamination, especially within cereal-based cropping systems. In response, the agricultural sector has witnessed the emergence of healthier alternatives by utilizing nanotechnology and nano-fertilizers (NFs). These innovative NFs harness the remarkable properties of nanoparticles, ranging in size from 1 to 100 nm, such as nanoclays and zeolites, to enhance nutrient utilization efficiency. Unlike their conventional counterparts, NFs offer many advantages, including variable solubility, consistent and effective performance, controlled release mechanisms, enhanced targeted activity, reduced eco-toxicity, and straightforward and safe delivery and disposal methods. By facilitating rapid and complete plant absorption, NFs effectively conserve nutrients that would otherwise go to waste, mitigating potential environmental harm. Moreover, their superior formulations enable more efficient promotion of sustainable crop growth and production than conventional fertilizers. This review comprehensively examines the global utilization of NFs, emphasizing their immense potential in maintaining environmentally friendly crop output while ensuring agricultural sustainability.

The combination of nanotechnology and potassium: applications in agriculture

Potassium fertilizer is indispensable for ensuring crop production, which in turn supports global food supply and safe farming practices. Potassium resources are primarily located in the Northern Hemisphere, leading to a current shortage of affordable potash and severe soil deficiencies in certain regions of the Southern Hemisphere. There is a shift away from mined salts in favor of locally available potassium resources. Utilizing potassium-rich silicates, for instance, could be a viable option to address this situation. The imperative of enhancing crop productivity and quality necessitates either increasing potassium availability or utilizing potassium more efficiently. Geneticists may find the development of plants that use potassium more effectively to be a valuable pursuit. Nanomaterials are increasingly becoming part of people's professional lives as a novel material category. This technology is gradually finding applications in agriculture to boost crop yields while reducing environmental pollution. This paper reviews the applications of common potassium-containing materials, explores the effects and mechanisms of nano-fertilizers on plants, and offers insights into future applications of nano-potassium fertilizers in agriculture. All in all, the application of nanotechnology in the production and utilization of potassium fertilizers is both necessary and effective. However, there are still many gaps in the current field of nano-potassium fertilizer application that require further research. It is hoped that this review can serve as a valuable reference for researchers working in this field.

Enhancing wheat crop production with eco-friendly chitosan encapsulated nickel oxide nanocomposites: A safe and sustainable solution for higher yield

In this work, we looked at using nickel oxide (NiO) nanocomposites with chitosan encapsulation as a nano-primer to improve wheat crop output. A straightforward green precipitation procedure was used to create the nanocomposites, and they were then characterized using several methods. According to the findings, the chitosan-encapsulated NiO nanocomposites possessed a large surface area and were resilient to changes in pH. Following this, wheat seeds were primed with the nanocomposites, and under greenhouse circumstances, the impact on crop growth was assessed. The findings demonstrated that, in comparison to the control group, nanocomposites priming considerably enhanced wheat growth and germination rate up to 99 %. In comparison to untreated plants, the wheat plants treated with the nanocomposites primer had greater plant height i.e. shoot length (11.4 cm) and root length (10.3 cm), leaf area, and biomass accumulation. Further research into the mechanism underlying the priming effect of nanocomposites on wheat growth revealed that the nanocomposites enhanced nutrient absorption, photosynthesis, and stress tolerance in wheat plants. In conclusion, our research shows that chitosan-encapsulated NiO nanocomposites have the potential to improve wheat crop productivity in an environmentally benign and long-term manner, offering a viable strategy for sustainable farming.

Phosphorus-based nanomaterials as a potential phosphate fertilizer for sustainable agricultural development

Phosphorus-based nanomaterials (PNMs) have been reported to have substantial promise for promoting plant growth, improving plant tolerance mechanisms, and increasing resistance to pathogenic organisms. Recent scientific investigation has demonstrated that utilizing PNMs can enhance plant physiological growth, photosynthetic pigments, antioxidant system, metabolism, nutrient absorption, rhizosphere secretion, and soil nutrients activation. Previous research on PNMs mostly concentrated on calcium phosphate, zeolite, and chitosan, with little systematic summarization, demanding a thorough evaluation of PNMs' broader uses. In our current review article, we address the knowledge gap by classifying PNMs according to green synthesis methods and the valence state of phosphorus while elucidating the underlying mechanisms through which these PNMs facilitate plant growth. In addition, we also targeted some strategies to improve the bioavailability of PNMs, offering valuable insights for the future design and safe implementation of PNMs in agricultural practices.

Green Synthesis of Zinc Oxide Nanoparticles Using Cymbopogon citratus Extract and Its Antibacterial Activity

Excessive use of antimicrobial medications including antibiotics has led to the emerging menace of antimicrobial resistance, which, as per the World Health Organization (WHO), is among the top ten public health threats facing humanity, globally. This necessitates that innovative technologies be sought that can aid in the elimination of pathogens and hamper the spread of infections. Zinc oxide (ZnO) has multifunctionality owing to its extraordinary physico-chemical properties and functionality in a range of applications. In this research, ZnO nanoparticles (NPs) were synthesized from zinc nitrate hexahydrate, by a green synthesis approach using Cymbopogon citratus extract followed by characterization of the NPs. The obtained X-ray diffraction peaks of ZnO NPs matched with the standard JCPDS card (no. 89-510). The particles had a size of 20-24 nm, a wurtzite structure with a high crystallinity, and hexagonal rod-like shape. UV-Vis spectroscopy revealed absorption peaks between 369 and 374 nm of ZnO NPs synthesized from C. citratus extract confirming the formation of ZnO. Fourier transform infrared confirmed the ZnO NPs as strong absorption bands were observed in the range of 381-403 cm-1 corresponding to Zn-O bond stretching. Negative values of the highest occupied molecular orbital-lowest unoccupied molecular orbital for ZnO NPs indicated the good potential to form a stable ligand-protein complex. Docking results indicated favorable binding interaction between ZnO and DNA gyrase subunit b with a binding energy of -2.93 kcal/mol. ZnO NPs at various concentrations inhibited the growth of Escherichia coli and Staphylococcus aureus. Minimum inhibitory concentration values of ZnO NPs against E. coli and S. aureus were found to be 92.07 ± 0.13 and 88.13 ± 0.35 μg/mL, respectively, at a concentration of 2 mg/mL. AO/EB staining and fluorescence microscopy revealed the ability of ZnO NPs to kill E. coli and S. aureus cells. Through the findings of this study, it has been shown that C. citratus extract can be used in a green synthesis approach to generate ZnO NPs, which can be employed as alternatives to antibiotics and a tool to eliminate drug-resistant microbes in the future.

Effects of two Mn-based nanomaterials on soybean antioxidant system and mineral element homeostasis

Since less attention has been paid to the physiological effects of manganese-based nanomaterials (Mn-based NMs) on plants, it is necessary to explore the application of Mn-based NMs in improving crop yield and the concentration range of Mn-based NMs that produce toxicity. The results showed that soil application of 100 mg/kg manganese oxide (MnO₂) and manganese tetroxide (Mn₃O₄) NMs could increase the shoot height of soybean by 51.8% and 31.8%, respectively, compared with the control. In addition, 100 mg/kg MnO₂ NMs increased catalase (CAT) activity in roots by 62.2%, and 50 mg/kg Mn₃O₄ NMs increased CAT activity in roots by 200%, thereby increasing the stress resistance of soybean. However, at the highest concentration of 500 mg/kg, Mn-based NMs increased the Mn content in soybean extremely so that the absorption of mineral elements such as potassium, phosphorus, and calcium in the root was inhibited. This research lays the foundation for the safe application of Mn-based NMs in agriculture, benefiting the development of nanotechnology and agriculture globally.

Phytofabrication of Silver Nanoparticles and Their Potent Antifungal Activity against Phytopathogenic Fungi

Fungal plant pathogens cause huge losses in agricultural production by decreasing crop yield and quality. To reduce crop loss from fungal damage, various synthetic fungicides are applied indiscriminately in agricultural practice. The majority of synthetic fungicides are non-biodegradable, and several critical human health risks are associated with them. Green synthesis nanotechnology offers an effectual, cost-effective, ecofriendly, and innocuous method for the synthesis of green nanofungicides, an excellent replacement for synthetic chemical fungicides. Origanum majorana is an aromatic herb with immense pharmacological and medicinal properties. In this context, the present study used the leaves of O. majorana to synthesize silver nanoparticles. The biosynthesized particles showed an absorption peak at 441 nm with ultraviolet-visible spectrophotometry (UV-Vis). The spectra obtained from Fourier transform infrared spectroscopy (FT-IR) of O. majorana extract and AgNPs showed a myriad of functional groups corresponding to vital biomolecules that act as capping and reducing agents. The synthesized silver nanoparticles were spheroidal, and their size measured between 8 nm and 42 nm, as depicted by transmission electron microscopy (TEM). The energy-dispersive X-ray spectrum (EDX) showed a silver peak at 3 keV. The phytofabricated silver NPs demonstrated robust inhibitory activity on the mycelial growth of A. alternata f sp. lycopersici (87%), followed by Pestalotiopsis mangiferae (85%), Macrophomina phaseolina (78%), and Colletotrichum musae (75%). The minimum inhibitory concentration value for A. alternata. f sp. lycopersici and Pestalotiopsis mangiferae was 2 μg/mL, while the minimum fungicidal concentrations were 4 and 8 μg/mL, respectively. Additionally, the fabricated AgNPs induced severe damaging and destructive effects to the morphology of hyphae and conidia, as witnessed by scanning electron microscopy studies.

Effect of zinc and iron oxide nanoparticles on plant physiology, seed quality and microbial community structure in a rice-soil-microbial ecosystem

In this study, we assessed the impact of zinc oxide (ZnO) and iron oxide (FeO) (<36 nm) nanoparticles (NPs) as well as their sulphate salt (bulk) counterpart (0, 25, 100 mg/kg) on rice growth and seed quality as well as the microbial community in the rhizosphere environment of rice. During the rice growing season 2021-22, all experiments were conducted in a greenhouse (temperature: day 30 °C; night 20 °C; relative humidity: 70%; light period: 16 h/8 h, day/night) in rice field soil. Results showed that low concentrations of FeO and ZnO NPs (25 mg/kg) promoted rice growth (height (29%, 16%), pigment content (2%, 3%)) and grain quality parameters such as grains per spike (8%, 9%), dry weight of grains (12%, 14%) respectively. As compared to the control group, the Zn (2%) and Fe (5%) accumulations at their respective low concentrations of NP treatments showed stimulation. Interestingly, our results showed that at low concentration of both the NPs the soil microbes had more diversity and richness than those in the bulk treated and control soil group. Although a number of phyla were affected by the presence of NPs, the strongest effects were observed for change in the abundance of the three phyla for Proteobacteria, Actinobacteria, and Planctomycetes. The rhizosphere environment was notably enriched with potential streptomycin producers, carbon and nitrogen fixers, and lignin degraders with regard to functional groups of microorganisms. However, microbial communities mainly responsible for chitin degradation, ammonia oxidation, and nitrite reduction were found to be decreased. The results from this study highlight significant changes in several plant-based endpoints, as well as the rhizosphere soil microorganisms. It further adds information to our understanding of the nanoscale-specific impacts of important micronutrient oxides on both rice and its associated soil microbiome.

Engineered Nanomaterials for Improving the Nutritional Quality of Agricultural Products: A Review

To ensure food safety, the current agricultural development has put forward requirements for improving nutritional quality and reducing the harmful accumulation of agricultural chemicals. Nano-enabled sustainable agriculture and food security have been increasingly explored as a new research frontier. Nano-fertilizers show the potential to be more efficient than traditional fertilizers, reducing the amount used while ensuring plant uptake, supplying the inorganic nutrients needed by plants, and improving the process by which plants produce organic nutrients. Other agricultural uses of nanotechnology affect crop productivity and nutrient quality in addition to nano-fertilizers. This article will review the research progress of using nanomaterials to improve nutritional quality in recent years and point out the focus of future research.

Effect of Silica-Based Nanomaterials on Seed Germination and Seedling Growth of Rice (Oryza sativa L.)

The application of nanomaterials (NMs) in agriculture has become a global concern in recent years. However, studies on their effects on plants are still limited. Here, we conducted a seed germination experiment for 5 days and a hydroponics experiment for 14 days to study the effects of silicon dioxide NMs(nSiO₂) and silicon carbide NMs(nSiC) (0,10, 50, 200 mg/L) on rice (Oryza sativa L.). Bulk SiO₂ (bSiO₂) and sodium silicate (Na₂SiO₃) were used as controls. The results showed that nSiO₂ and nSiC increased the shoot length (11-37%, 6-25%) and root length (17-87%, 59-207%) of germinating seeds, respectively, compared with the control. Similarly, inter-root exposure to nSiO₂, bSiO_2, and nSiC improved the activity of aboveground catalase (10-55%, 31-34%, and 13-51%) and increased the content of trace elements magnesium, copper, and zinc, thus promoting the photosynthesis of rice. However, Na₂SiO₃ at a concentration of 200 mg/L reduced the aboveground and root biomass of rice by 27-51% and 4-17%, respectively. This may be because excess silicon not only inhibited the activity of root antioxidant enzymes but also disrupted the balance of mineral elements. This finding provides a new basis for the effect of silica-based NMs promotion on seed germination and rice growth.