On the probability of ecological risks from microplastics in the Laurentian Great lakes

Pollution characteristics and prospective risk of microplastics in the Zhengzhou section of Yellow River, China

The ubiquitous occurrence of microplastics (MPs) in the freshwater has attracted widespread attention. The Zhengzhou section of the Yellow River was the most prosperous region in ancient China, and the rapid urbanization, industrialization, and agricultural practices contributed to MPs pollution in aquatic systems recently, whereas the contamination status of MPs in the area is still not available. In this study, a total of fourteen sampling cross-sections were selected in the region to collect water samples systematically for the analysis of MPs pollution characteristics and potential risks. Results showed that abundance of MPs in the water were ranged from 2.33 to 15.50 n/L, with an average value of 6.40 ± 3.40 n/L, which was higher than it in other inland rivers from China. Moreover, the MPs of 0.5-2 mm were the dominant sizes in Yellow River of Zhengzhou region, and most of them were black fibres. The top three polymers were Polyethylene terephthalate (PET), Polyamide (PA) and Polypropylene (PP). High diversity indices of MPs observed at S3, S4, S5, S6, S7, and S8 for size, colour, polymer and shape indicated diverse and complex sources of MPs in those cross-sections. The MPs in water from Zhengzhou area of Yellow River probably degraded from textiles, fishing net, plastic bags, mulching film, packaging bags, and tire wear. The chemical risk assessment revealed a level III risk for study area, while S8 and S11 in which PVA or PAN with higher hazard score detected were categorised as class V risk. Coincidentally, probabilistic risk assessment showed a considerable ecological risk of MPs from Yellow River in Zhengzhou City, with possibility of 99.48 and 98.01 % adverse effect for food dilution and translocation-mediated mechanism, respectively. The results are expected to assistance for development of policies and ultimately combating MPs pollution.

Unveiling microplastics pollution in a subtropical rural recreational lake: A novel insight

While global attention has been primarily focused on the occurrence and persistence of microplastics (MP) in urban lakes, relatively little attention has been paid to the problem of MP pollution in rural recreational lakes. This pioneering study aims to shed light on MP size, composition, abundance, spatial distribution, and contributing factors in a rural recreational lake, 'Nikli Lake' in Kishoreganj, Bangladesh. Using density separation, MPs were extracted from 30 water and 30 sediment samples taken from ten different locations in the lake. Subsequent characterization was carried out using a combination of techniques, including a stereomicroscope, Fourier transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FE-SEM). The results showed a significant prevalence of MPs in all samples, with an average amount of 109.667 ± 10.892 pieces/kg3 (dw) in the sediment and 98.167 ± 12.849 pieces/m3 in the water. Small MPs (<0.5 mm), fragments and transparent colored particles formed the majority, accounting for 80.2%, 64.5% and 55.3% in water and 78.9%, 66.4% and 64.3% in sediment, respectively. In line with global trends, polypropylene (PP) (53%) and polyethylene (PE) (43%) emerged as the predominant polymers within the MPs. MP contents in water and sediment showed positive correlations with outflow, while they correlated negatively with inflow and lake depth (p > 0.05). Local activities such as the discharge of domestic sewage, fishing waste and agricultural runoff significantly influence the distribution of polypropylene. Assessment of pollution factor, pollution risk index and pollution load index values at the sampling sites confirmed the presence of MPs, with values above 1. This study is a baseline database that provides a comprehensive understanding of MP pollution in the freshwater ecosystem of Bangladesh, particularly in a rural recreational lake. A crucial next step is to explore ecotoxicological mechanisms, legislative measures and future research challenges triggered by MP pollution.

Size Distributions of Microplastics in the St Louis Estuary and Western Lake Superior

Identifying the sources and fate of microplastics in natural systems has garnered a great deal of attention because of their implications for ecosystem health. This work characterizes the size fraction, morphology, color, and polymer composition of microplastics in western Lake Superior and its adjacent harbor sampled in August and September 2021. The results reveal that the overall microplastic counts are similar, with the harbor stations ranging from 0.62 to 3.32 microplastics per liter and the lake stations ranged from 0.83 to 1.4 microplastics per liter. However, meaningful differences between the sample locations can be seen in the size fraction trends and polymer composition. Namely, the harbor samples had relatively larger amounts of the largest size fraction and more diversity of polymer types, which can be attributed to the urbanized activity and shorter water residence time. Power law size distribution modeling reveals deviations that help in the understanding of potential sources and removal mechanisms, although it significantly underpredicts microplastic counts for smaller-sized particles (5-45 μm), as determined by comparison with concurrently collected microplastic samples enumerated by Nile Red staining and flow cytometry.

Source-specific probabilistic risk assessment of microplastics in soils applying quality criteria and data alignment methods

The risk characterization of microplastics (MP) in soil is challenging due to the non-alignment of existing exposure and effect data. Therefore, we applied data alignment methods to assess the risks of MP in soils subject to different sources of MP pollution. Our findings reveal variations in MP characteristics among sources, emphasizing the need for source-specific alignments. To assess the reliability of the data, we applied Quality Assurance/Quality Control (QA/QC) screening tools. Risk assessment was carried out probabilistically, considering uncertainties in data alignments and effect thresholds. The Hazardous Concentrations for 5% (HC5) of the species were significantly higher compared to earlier studies and ranged between 4.0 × 107 and 2.3 × 108 particles (1-5000 µm)/kg of dry soil for different MP sources and ecologically relevant metrics. The highest risk was calculated for soils with MP entering via diffuse and unspecified local sources, i.e., "background pollution". However, the source with the highest proportion of high-risk values was sewage, followed by background pollution and mulching. Notably, locations exceeding the risk threshold obtained low scores in the QA/QC assessment. No risks were observed for soils with compost. To improve future risk assessments, we advise to primarily test environmentally relevant MP mixtures and adhere to strict quality criteria.

Microparticles in Wild and Caged Biota, Sediments, and Water Relative to Large Municipal Wastewater Treatment Plant Discharges

Anthropogenically modified microparticles including microplastics are present in municipal wastewater treatment plant (WWTP) effluents; however, it is unclear whether biotic exposures are elevated downstream of these outfalls. In the fall of 2019, the present study examined whether microparticle levels in resident fish, environmental samples, and caged organisms were elevated near the Waterloo and Kitchener WWTP outfalls along the Grand River, Ontario, Canada. Wild rainbow darters (Etheostoma caeruleum) were collected from a total of 10 sites upstream and downstream of both WWTPs, along with surface water and sediment samples to assess spatial patterns over an approximately 70-km river stretch. Amphipods (Hyalella azteca), fluted-shell mussels (Lasmigona costata), and rainbow trout (Oncorhynchus mykiss) were also caged upstream and downstream of one WWTP for 14 or 28 days. Whole amphipods, fish digestive tracts, and mussel tissues (hemolymph, digestive glands, gills) were digested with potassium hydroxide, whereas environmental samples were processed using filtration and density separation. Visual identification, measurement, and chemical confirmation (subset only) of microparticles were completed. Elevated abiotic microparticles were found at several upstream reference sites as well as at one or both wastewater-impacted sites. Microparticles in amphipods, all mussel tissues, and wild fish did not show patterns indicative of increased exposures downstream of effluent discharges. In contrast, elevated microparticle counts were found in trout caged directly downstream of the outfall. Across all samples, cellulose fibers (mainly blue and clear colors) were the most common. Overall, results suggest little influence of WWTP effluents on microparticles in biota but rather a ubiquitous presence across most sites that indicates the importance of other point and nonpoint sources to this system. Environ Toxicol Chem 2024;00:1-15. © 2024 His Majesty the King in Right of Canada and The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC. Reproduced with the permission of the Minister of Environment and Climate Change Canada.

Analyzing species sensitivity distribution of evidently edible microplastics for freshwater biota

Assessing the ecological risks of microplastics is difficult because of the limited availability of reliable ecotoxicity data. Although freshwater is a valuable sink for microplastics, the current framework for ecological risk assessment using traditional toxicity data is not applicable to freshwater ecosystems. Herein, species sensitivity distribution (SSD) curves were compared for edible and all microplastics exposed to aquatic organisms based on traditional endpoint-based and all-endpoint-based databases. Freshwater toxicity data for microplastics were screened after verifying microplastic presence in test species (56 toxicity datapoints for one microalga, three water fleas, one fish, and one crab; 0.02-100 µm-sized microplastics). SSD and curve parameters were compared with or without non-traditional toxicity endpoints. The HC50 in all endpoint databases was more sensitive than that in the traditional endpoint database and showed a good fit. SSD curves derived from the database for all microplastics were compared and analyzed with edible microplastics. HCx increased for edible microplastics (0.02-100 µm-sized) than for all microplastics (0.02-200 µm-sized), and the size of edible microplastics was lower than of all microplastics. Thus, using non-traditional toxicity data, the SSD approach compensates for the limited ecotoxicity data on microplastics while considering the internalization of microplastics in biota.

Probabilistic risk assessment of microplastics in Tai Lake, China

Microplastics are a global environmental concern, especially in freshwater ecosystems. Despite the studies in specific regions of Tai lake, a gap persists in understanding the comprehensive risk of MPs across the entire watershed. Therefore, this study offers an overview of MPs abundance and assesses ecotoxicological risk by employing acute and chronic species sensitivity distributions, which consider the effects triggered by MPs. The concentrations of MPs ranged from 0 to 18.6 particles/L within the lake, 1.56 to 1.42 × 102 particles/L in the rivers, and 0.16 to 0.7 particles/L in the estuaries. Certain areas, particularly the northwest and southeast regions, exhibit higher concentrations. Using existing toxicity data, this study calculated predicted no effect concentrations for acute and chronic exposure of MPs to freshwater species, resulting in values of 11.5 and 31.72 particles/L, respectively. The probabilistic risk assessment indicates that the average risk possibility of MPs in Tai lake was 16 %. Moreover, the risk characterization ratio indicated that 22 % of the locations in Tai lake showed an acute ecological risk, while 7.4 % exhibit a chronic ecological risk. The assessment concluded that MPs reported in the literature could pose a considerable risk to Tai lake biota. However, the risk associated with MPs followed descending order: river >lake > estuary waters. Our research supplies valuable insights for the assessment of ecological risks associated with MPs on a whole watershed scale.

A City-Wide Emissions Inventory of Plastic Pollution

A global agreement on plastic should have quantitative reduction targets for the emissions of plastic pollution and regular measurements to track success. Here, we present a framework for measuring plastic emissions, akin to greenhouse gas emissions, and demonstrate its utility by calculating a baseline measurement for the City of Toronto in Ontario, Canada. We identify relevant sources of plastic pollution in the city, calculate emissions for each source by multiplying activity data by emission factors for each source, and sum the emissions to obtain the total annual emissions of plastic pollution generated. Using Monte Carlo simulations, we estimate that 3,531 to 3,852 tonnes (T) of plastic pollution were emitted from Toronto in 2020. Littering is the largest source overall (3,099 T), and artificial turf is the largest source of microplastic (237 T). Quantifying source emissions can inform the most effective mitigation strategies to achieve reduction targets. We recommend this framework be scaled up and replicated in cities, states, provinces, and countries around the world to inform global reduction targets and measure progress toward reducing plastic pollution.

Feeding behavior and species interactions increase the bioavailability of microplastics to benthic food webs

Plastics are pervasive in aquatic ecosystems, in which they circulate in the water column, accumulate in sediments, and are taken up, retained, and exchanged with their biotic environment via trophic and non-trophic activities. Identifying and comparing organismal interactions are a necessary step to improve monitoring and risk assessments of microplastics. We use a community module to test how abiotic and biotic interactions determine the fate of microplastics in a benthic food web. Using single-exposure trials on a trio of interacting freshwater animals (the quagga mussel Dreissena bugensis, a filter feeder; the gammarid amphipod Gammarus fasciatus, a deposit feeder; and the round goby Neogobius melanostomus, a benthivorous fish), we quantify the (1) uptake of microplastics from environmental routes (water, sediment) under six exposure concentrations, (2) the depuration capacities over 72 h, and (3) the transfer of microbeads via trophic (predator-prey) and behavioral interactions (commensalism, intraspecific facilitation). Under 24 h exposures, each animal of our module acquired beads from both environmental routes. The body burden of filter-feeders was higher when they were exposed to particles in suspension, whereas detritivores had similar uptake from either route. Mussels transferred microbeads to amphipods, and both invertebrates transferred beads to their mutual predator, the round goby. Round gobies generally displayed low contamination from all routes (suspension, sedimented, trophic transfer) with a higher microbead load from preying on contaminated mussels. Higher mussel abundance (10-15 mussel per aquaria, i.e., ~200-300 mussels·m2) did not increase individual mussel burdens during exposure, and neither did it increase the transfer of beads from mussels to gammarids via biodeposition. Our community module approach revealed that the feeding behavior of animals allows microplastic uptake from multiple environmental routes, whereas trophic and non-trophic species interactions increased their burden within their food web community.

Adding Depth to Microplastics

The effects and risks of microplastics correlate with three-dimensional (3D) properties, such as the volume and surface area of the biologically accessible fraction of the diverse particle mixtures as they occur in nature. However, these 3D parameters are difficult to estimate because measurement methods for spectroscopic and visible light image analysis yield data in only two dimensions (2D). The best-existing 2D to 3D conversion models require calibration for each new set of particles, which is labor-intensive. Here we introduce a new model that does not require calibration and compare its performance with existing models, including calibration-based ones. For the evaluation, we developed a new method in which the volumes of environmentally relevant microplastic mixtures are estimated in one go instead of on a cumbersome particle-by-particle basis. With this, the new Barchiesi model can be seen as the most universal. The new model can be implemented in software used for the analysis of infrared spectroscopy and visual light image analysis data and is expected to increase the accuracy of risk assessments based on particle volumes and surface areas as toxicologically relevant metrics.

The pollution of microplastics in sediments of the Yangtze River Basin: Occurrence, distribution characteristics, and basin-scale multilevel ecological risk assessment

Microplastics (MPs) pollution in the Yangtze River Basin (YRB) of China has grown to be a serious issue, yet there is a lack of understanding of the environmental risks of MPs in the sediment of the entire basin. This work revealed the spatial distribution characteristics of MPs in YRB sediments, and it methodically assessed the ecological risks of MPs by taking into consideration their abundance, toxic effects, and polymer types. The results showed a high heterogeneity in the abundance of MPs in YRB sediments, with an average of 611 particles/kg dry weight (DW) sediment. Small-sized MPs (<1 mm), fibrous, transparent-colored and polypropylene (PP) accounted for the majority with 71.6%, 68%, 37% and 30.8%, respectively. Correlation analysis indicated significant influences of human activities such as population, industrial structure, and urban wastewater discharge on the abundance and morphological types of MPs in sediments. Based on chronic toxicity data exposed to sediments, a predicted no-effect concentration (PNEC) of 539 particles/kg DW was calculated using the species susceptibility distribution (SSD). Multiple deterministic risk assessment indices indicated that MPs in YRB sediments exhibited primarily low pollution load levels, moderate-to-low potential ecological risk levels, and high levels of polymer pollution. However, probabilistic risk assessment revealed an overall low risk of MPs in YRB sediments. Monte Carlo simulation results demonstrated that polyvinyl chloride (PVC) and polycarbonate (PC) made a great contribution to ecological risk and should be considered as priority control pollutants in MPs. In addition, various assessments showed that the ecological risk of MPs in river sediments was higher than that in lake reservoir sediments. This is the first study to comprehensively assess the ecological risk of MPs in sediments of the YRB, which improves the understanding of the basin-wide occurrence characteristics and environmental risks of MPs in freshwater systems.