Batch interaction of emerging tetracycline contaminant with novel phosphoric acid activated corn straw porous carbon: Adsorption rate and nature of mechanism

Biochar with enhanced performance prepared based on "graphite-structure regulation" conjecture designed to effectively control water pollution

In this work, corn straw was used as raw material, Hummers method and activation were used to adjust the graphite structure in biochar, and preparing straw based biochar (H-BCS) with ultra-high specific surface area (3441.80 m2/g), highly total pore volume (1.9859 cm3/g), and further enhanced physicochemical properties. Compared with untreated straw biochar (BCS), the specific surface area and total pore volume of H-BCS were increased by 47.24 % and 55.85 %, respectively. H-BCS showed good removal ability in subsequent experiments by using chloramphenicol (CP), hexavalent chromium (Cr6+), and crystal violet (CV) as adsorption models. In addition, the adsorption capacities of H-BCS (CP: 1396.30 mg/g, Cr6+: 218.40 mg/g, and CV: 1246.24 mg/g) are not only higher than most adsorbents, even after undergoing 5 cycles of regeneration, its adsorption capacity remains above 80 %, indicating significant potential for practical applications. In addition, we also speculated and analyzed the conjecture about the "graphite-structure regulation" during the preparation process, and finally discussed the possible mechanism during the adsorption processes. We hope this work could provide a new strategy to solve the restriction of biochar performance by further exploring the regulation of graphite structure in carbon materials.

Preparation of a β-cyclodextrin grafted magnetic biochar for efficient extraction of four antiepileptic drugs in plasma samples

Simultaneous monitoring of plasma concentration levels of multiple antiepileptic drugs (AEDs) is essential for dose adjustment in comprehensive epilepsy treatment, necessitating a sensitive technique for accurate extraction and determination of AEDs. Herein, a magnetic solid-phase extraction (MSPE) technique on the basis of modified biochar (BC) is investigated to extract four AEDs from plasma, in conjunction with high performance liquid chromatography. BC derived from Zizyphus jujuba seed shells was activated by phosphoric acid (PBC) and magnetized via coprecipitation to produce MPBC. The MPBCCD obtained after modification with β-cyclodextrin (CD) was characterized and evaluated for adsorption. It exhibited fast adsorption kinetics based on second-order kinetics and satisfactory adsorption capacity for AEDs. Then it was employed as the MSPE adsorbent and the influencing parameters were optimized. The enrichment factor was 18.75. The validation analysis revealed a favorable linearity that ranged from 0.04 to 20 μg·mL-1 along with a low limit of detection of 6.85 to 10.19 ng·mL-1. The recovery of the AEDs ranged from 78.7 to 109.2 %, with relative standard deviations below 6.7 %. Using quantum chemistry theory calculations and experimental results analysis, the adsorption mechanism was investigated. It disclosed that the suggested strategy built upon MPBCCD was appropriate for the assessment of AEDs in plasma and expanded the usage of BC as the environmentally favorable matrix for the analysis of biological samples.

Norfloxacin adsorption by urban green waste biochar: characterization, kinetics, and mechanisms

Biochar, as a potential adsorbent, has been widely employed to remove pollutants from sewage. In this study, a lignin-based biochar (CB-800) was prepared by a simple high-temperature pyrolysis using urban green waste (Cinnamomum camphora leaves) as a feedstock to remove norfloxacin (NOR) from water. Batch adsorption test results indicated that CB-800 had a strong removal capacity for NOR at a wide range of pH values. The maximum adsorption achieved in the study was 50.90 ± 0.64 mg/g at 298 K. The pseudo-first and second-order kinetic models and the Dubinin-Radushkevich isotherm fitted the experimental data well, indicating that NOR adsorption by CB-800 was a complex process involving both physi-sorption and chemi-sorption. The physical properties of CB-800 were characterized by SEM and BET. The mesoporous structures were formed hierarchically on the surface of CB-800 (with an average pore size of 2.760 nm), and the spatial structure of NOR molecules was more easily adsorbed by mesoporous structures. Combined with Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analysis, it was showed that the main NOR adsorption mechanisms by CB-800 included ion exchange, π-electron coordination, hydrogen bonding, and electrostatic adsorption. Meanwhile, the reduction of C = O and pyridine nitrogen, and the presence of C-F2, also indicated the occurrence of substitution, addition, and redox. This study not only determined the reaction mechanism between biochar and NOR, but also provides guidance to waste managers for the removal of NOR from water by biochar. It is envisaged that the results will broaden the utilization of urban green waste.

The application of P-modified biochar in wastewater remediation: A state-of-the-art review

Phosphorus modified biochar (P-BC) is an effective adsorbent for wastewater remediation, which has attracted widespread attention due to its low cost, vast source, unique surface structure, and abundant functional groups. However, there is currently no comprehensive analysis and review of P-BC in wastewater remediation. In this study, a detailed introduction is given to the synthesis method of P-BC, as well as the effects of pyrolysis temperature and residence time on physical and chemical properties and adsorption performance of the material. Meanwhile, a comprehensive investigation and evaluation were conducted on the different biomass types and phosphorus sources used to synthesize P-BC. This article also systematically compared the adsorption efficiency differences between P-BC and raw biochar, and summarized the adsorption mechanism of P-BC in removing pollutants from wastewater. In addition, the effects of P-BC composite with other materials (element co-doping, polysaccharide stabilizers, microbial loading, etc.) on physical and chemical properties and pollutant adsorption capacity of the materials were investigated. Some emerging applications of P-BC were also introduced, including supercapacitors, CO2 adsorbents, carbon sequestration, soil heavy metal remediation, and soil fertility improvement. Finally, some valuable suggestions and prospects were proposed for the future research direction of P-BC to achieve the goal of multiple utilization.

Efficient Adsorbent Derived from Phytolith-Rich Ore for Removal of Tetracycline in Wastewater

In recent decades, the tetracycline (TC) concentration in aquatic ecosystems has gradually increased, leading to water pollution problems. Various mineral adsorbents for the removal of tetracyclines have garnered considerable attention. However, efficient adsorbents suitable for use in a wide pH range environment have rarely been reported. Herein, a phytolith-rich adsorbent (PRADS) was prepared by a simple one-step alkali-activated pyrolysis treatment using phytolith as a raw material for effectively removing TC. PRADS, benefiting from its porous structure, which consists of acid- and alkali-resistant, fast-adsorbing macroporous silica and mesoporous carbon, is highly desirable for efficient TC removal from wastewater. The results indicate that PRADS exhibited excellent adsorption performance and stability for TC over a wide pH range of 2.0-12.0 under the coexistence of competing ions, which could be attributed to the fact that PRADS has a porous structure and contains abundant oxygen-containing functional groups and a large number of bonding sites. The adsorption mechanisms of PRADS for TC were mainly attributed to pore filling, hydrogen bonding, π-π electron-donor-acceptor, and electrostatic interactions. This work could offer a novel preparation strategy for the effective adsorption of pollutants by new functionalized phytolith adsorbents.

Magnetic Persimmon Leaf Composite: Preparation and Application in Magnetic Solid-Phase Extraction of Pesticides in Water Samples

In recent years, the utilization of biomass materials for the removal and detection of water pollutants has garnered considerable attention. This study introduces, for the first time, the preparation of Fe3O4/persimmon leaf magnetic biomass composites. The magnetic composites were employed in a magnetic solid-phase extraction method, coupled with gas chromatography-electron capture detection (GC-ECD), for the analysis of four pesticides (trifluralin, triadimefon, permethrin, and fenvalerate) in environmental water samples. The innovative magnetic persimmon leaf composites were synthesized by in situ generation of Fe3O4 nanoparticles through coprecipitation and loaded onto persimmon leaves. These composites exhibit superparamagnetism with a saturation magnetization of 12.8 emu g-1, facilitating rapid phase separation using a magnetic field and reducing the extraction time to 10 min. Desorption can be achieved within 30 s by aspirating 20 times, eliminating the need for time-consuming and labor-intensive experimental steps like filtration and centrifugation. The specific surface area of the magnetic composite adsorbent increased from 1.3279 m2 g-1 for the original persimmon leaf to 5.4688 m2 g-1. The abundant hydroxyl and carboxyl groups on the composites provide ample adsorption sites, resulting in adsorption capacities ranging from 55.056 mg g-1 to 73.095 mg g-1 for the studied pesticides. The composites exhibited extraction recoveries ranging from 80% to 90% for the studied pesticides. Compared to certain previously reported MSPE methods, this approach achieves equivalent or higher extraction recoveries in a shorter operation time, demonstrating enhanced efficiency and convenience. Good linearity of the target analytes was obtained within the range of 0.75-1500 μg L-1, with a determination of coefficient (R2) greater than 0.999. These findings contribute to the use of magnetic persimmon leaf biomass materials as effective and environmentally friendly adsorbents for pollutant determination in water samples.

Adsorption characterization of tetracycline antibiotics on alkali-functionalized rice husk biochar and its evaluation on phytotoxicity to seed germination

This work presented adsorption characteristics of tetracycline antibiotics (TCs) on KOH-functionalized rice husk biochar pyrolyzed at 700 °C (KBC700) and evaluation on phytotoxicity of TCs-adsorbed aqueous phase to seed germination. Specifically, KBC700 gained eightfold rise in specific surface area by KOH activation. Predominant monolayer chemisorption helped KBC700 control TCs, and spontaneous and exothermic features were identified by thermodynamic studies. KBC700 could efficiently work in a wide pH range (4.5 ~ 9.5), as well as in simulated eutrophic water and co-existing cationic solution. Humic acid exerted negative impact on TCs disposal. Outstanding regeneration capability and stability were also found during adsorption-desorption cycles. Mechanism discussion implied predominant pore filling and π-π interaction accompanied by hydrogen bonding and electrostatic interaction involved in TCs-removal process. Importantly, less phytotoxicity to seed germination was found in TCs-adsorbed aqueous phase. Collectively, these findings contribute to adsorption properties recognition and subsequent application for KOH-modified rice rusk biochar in environmental TCs remediation.

A mini review of recent progress in the removal of emerging contaminants from pharmaceutical waste using various adsorbents

The presence of emerging contaminants (ECs) originating from pharmaceutical waste in water, wastewater, and marine ecosystems at various geographical locations has been clearly publicised. This review paper presents an overview of current monitoring data on the occurrences and distributions of ECs in coastal ecosystem, tap water, surface water, ground water, treated sewage effluents, and other sources. Technological advancements for EC removal are also presented, which include physical, chemical, biological, and hybrid treatments. Adsorption remains the most effective method to remove ECs from water bodies. Various types of adsorbents, such as activated carbons, biochars, nanoadsorbents (carbon nanotubes and graphene), ordered mesoporous carbons, molecular imprinting polymers, clays, zeolites, and metal-organic frameworks have been extensively used for removing ECs from water sources and wastewater. Extensive findings on adsorptive performances, process efficiency, reusability properties, and other related information are thoroughly discussed in this mini review.

Enhanced adsorption of phenol from aqueous solution by KOH combined Fe-Zn bimetallic oxide co-pyrolysis biochar: Fabrication, performance, and mechanism

In this study, impregnation combined with KOH activation with different mixing methods was used to prepare magnetic biochar. The effects of synthetic method on biochar physicochemical properties and adsorption performance were explored. The results showed that treatment of a Fe-Zn oxide with KOH activation provided excellent adsorption properties with adsorption capacity of 458.90 mg/g due to well-developed microporous structure and rich-in O-containing functional groups as well as exposed oxidizing functional groups (Fe2O3 and FeOOH). Langmuir-Freundlich and pseudo-second-order models accurately fit phenol adsorption. Neutral conditions (pH = 6) and lower ionic strengths were beneficial to phenol removal. Additionally, the predominant adsorption processes were physisorption and chemisorption. Correlation analyses and characterization data confirmed that pore filling, π-π interactions and surface complexation were the dominant driving forces for phenol adsorption. This research provides an environmentally friendly method for utilizing agricultural wastes for the removal of a variety of pollutions from aquatic environment.

Removal of tetracycline in aqueous solution by iron-loaded biochar derived from polymeric ferric sulfate and bagasse

In this study, the tetracycline (TC) removal performance of iron-loaded biochar (BPFSB) derived from sugarcane bagasse and polymerized iron sulfate was investigated, and the mechanism of TC removal was also explored by study of isotherms, kinetics and thermodynamics and characterization of fresh and used BPFSB (XRD, FTIR, SEM and XPS). The results showed that under optimized conditions (initial pH 2; BPFSB dosage 0.8 g·L-1; TC initial concentration 100 mg·L-1; Contact time 24 h; temperature 298 K), the removal efficiency of TC was as high as 99.03%. The isothermal removal of TC followed well the Langmuir, Freundlich, and Temkin models, indicating that multilayer surface chemisorption dominated the TC removal. The maximum removal capacity of TC by BPFSB at different temperatures was 185.5 mg·g-1 (298 K), 192.7 mg·g-1 (308 K), and 230.9 mg·g-1 (318 K), respectively. The pseudo-second-kinetic model described the TC removal better, while its rate-controlling step was a combination of liquid film diffusion, intraparticle diffusion, and chemical reaction. Meanwhile, TC removal was also a spontaneous and endothermic process, during which the randomness and disorder between the solid-liquid interface was increased. According to the characterization of BPFSBs before and after TC removal, H-bonding and complexation were the major interactions for TC surface adsorption. Furthermore, BPFSB was efficiently regenerated by NaOH. In summary, BPFSB had the potential for practical application in TC removal.

Super facile one-step synthesis of sugarcane bagasse derived N-doped porous biochar for adsorption of ciprofloxacin

A new N-doped biochar derived from sugarcane bagasse (NSB) was prepared by one-pot pyrolysis with sugarcane bagasse as feedstock, melamine as nitrogen source and NaHCO₃ as pore-forming agent, and then NSB was used to adsorb ciprofloxacin (CIP) in water. The optimal preparation conditions of NSB were determined based on the evaluation index of adsorbability of NSB for CIP. SEM, EDS, XRD, FTIR, XPS and BET characterizations were used to analyze the physicochemical properties of the synthetic NSB. It was found that the prepared NSB had excellent pore structure, high specific surface area and more nitrogenous functional groups. Meanwhile, it was demonstrated that the synergistic interaction between melamine and NaHCO₃ increased the pores of NSB and the largest surface area of NSB was 1712.19 m²/g. The CIP adsorption capacity of 212 mg/g was obtained under optimal parameters as follows: NSB amount 0.125 g/L, initial pH 6.58, adsorption temperature 30 °C, CIP initial concentration 30 mg/L and adsorption time 1 h. The isotherm and kinetics studies elucidated that the adsorption of CIP conformed both D-R model and Pseudo-second-order kinetic model. The high CIP adsorption capacity of NSB for CIP was due to the combined filling pore, π-π conjugation and hydrogen bonding. All results demonstrated that adsorption of CIP by the low-cost N-doped biochar of NSB is a reliable technology for the disposal of CIP wastewater.

Porous biochar derived from walnut shell as an efficient adsorbent for tetracycline removal

In this study, a high-performance porous adsorbent was prepared from biochar through a simple one-step alkali-activated pyrolysis treatment of walnut shells, and it was effective in removing tetracycline (TC). The specific surface area (SSA) of potassium hydroxide-pretreated walnut shell-derived biochar pyrolyzed at 900°C (KWS900) increased remarkably compared to that of the pristine walnut shell and reached 1713.87±37.05 m²·g^-1. The maximum adsorption capacity of KWS900 toward TC was 607.00±31.87 mg·g^-1. The pseudo-second-order kinetic and Langmuir isotherm models were well suited to describe the TC adsorption process onto KWS900. The KWS900 exhibited high stability and reusability for TC adsorption in the presence of co-existing anions or cations over a wide pH range of 1.0-11.0. Further investigations demonstrated that the proposed adsorption mechanism involved pore filling, hydrogen bonding, π-π stacking, and electrostatic interaction. These findings provide a valuable reference for developing biochar-based adsorbents for pollutant removal.

Removal of Ciprofloxacin from Water by a Potassium Carbonate-Activated Sycamore Floc-Based Carbonaceous Adsorbent: Adsorption Behavior and Mechanism

In this study, a porous carbonaceous adsorbent was prepared from sycamore flocs by pyrolysis method and K₂CO₃ activation. The effects of preparative conditions of the material on its adsorptive property were explored. The optimal material (SFB_2-900) was obtained with a K₂CO₃/biochar mass ratio of 2:1 at an activation temperature of 900 °C, possessing a huge surface specific area (1651.27 m²/g). The largest adsorption capacity for ciprofloxacin on SFB_2-900 was up to 430.25 mg/g. The adsorption behavior was well described by the pseudo-second-order kinetic model and the Langmuir isothermal model. Meanwhile, this process was spontaneous and exothermic. The obtained material showed excellent adsorption performance in the conditions of diverse pH range, ionic strength, and water quality of the solution. The optimum adsorption conditions (pH = 7.01, dosage = 0.6 g/L, and C₀ = 52.94 mg/L) determined based on the response surface methodology were in accordance with the practical validation consequences. The good regeneration effect of SFB_2-900 manifested that this material had great practical application potential. Combining the experimental results and density functional theory calculation results, the adsorption mechanisms mainly included pore filling, π-π EDA interactions, electrostatic interactions, and H-bonds. The material could be regarded as a novel and high-efficiency adsorbent for antibiotics. Additionally, these findings also provide reference for the reuse of waste biomass in water treatment.

Adsorption of chloramphenicol from water using Carex meyeriana Kunth-derived hierarchical porous carbon with open channel arrays

A carbon material with both open macrochannel arrays and abundant micro/mesopores was prepared, characterized, and applied for removing chloramphenicol (CAP) from water. In the preparation process, Carex meyeriana Kunth (CM) with natural channel arrays was used as the precursor for producing the biochar, and NaOH was used for removing silicon and formatting micro- and mesopores of the porous carbon. The product (PCCM) exhibited the highest specific surface area (2700.24 m² g^-1) among the reported CM-derived porous carbons. The adsorption performances of PCCM were evaluated through batch adsorption experiments. The maximum adsorption capacity of PCCM toward CAP was 1659.43 mg g^-1. The adsorption mechanism was investigated with the aid of theoretical calculations. Moreover, PCCM exhibited better performance than other porous carbon adsorbents in fixed-bed experiments, which may be due to its structural advantages.

Pyrolysis temperature affects the physiochemical characteristics of lanthanum-modified biochar derived from orange peels: Insights into the mechanisms of tetracycline adsorption by spectroscopic analysis and theoretical calculations

Biochar (BC) derived from orange peels was modified using LaCl₃ to enhance its tetracycline (TC) adsorption capacity. SEM-EDS, FT-IR, XRD, and BET were used to characterize the physiochemical characteristics of La-modified biochar (La-BC). Batch experiments were conducted to investigate the effects of several variables like pyrolysis temperature, adsorbent dosage, initial pH, and coexisting ions on the adsorption of TC by La-BC. XPS and density functional theory (DFT) were used to elucidate the TC adsorption mechanism of La-BC. The results demonstrated that La was uniformly coated on the surface of the La-BC. The physiochemical characteristics of La-BC highly depended on pyrolysis temperature. Higher temperature increased the specific surface area and functional groups of La-BC, thus enhancing its TC adsorption capacity. La-BC prepared at 700 °C (BC@La-700) achieved the maximum adsorption capacity of 143.20 mg/g, which was 6.8 and 4.6 times higher than that of BC@La-500 and BC@La-600, respectively. The mechanisms of TC adsorption by La-BC were most accurately described by the pseudo-second-order kinetic model. Furthermore, the adsorption isotherm of La-BC was consistent with the Freundlich model. BC@La-700 achieved good TC adsorption efficiencies even at a wide pH range (pH 4-10). Humic acid significantly inhibited TC adsorption by La-BC. The presence of coexisting ions (NH₄⁺, Ca²⁺, NO₃^-) did not significantly affect the adsorption capacity of La-BC, particularly BC@La-700. Moreover, BC@La-700 also exhibited the best recycling performance, which achieved relative high adsorption capacity even after 5 cycles. The XPS results showed that π-π bonds, oxygen-containing functional groups, and La played a major role in the adsorption of TC on La-BC. The result of DFT showed that the adsorption energy of La-BC was the greatest than that of other functional groups on biochar. Collectively, our findings provide a theoretical basis for the development of La-BC based materials to remove TC from wastewater.

Adsorption of multicomponent VOCs on various biomass-derived hierarchical porous carbon: A study on adsorption mechanism and competitive effect

Biomass-derived porous carbon materials are potential adsorbents for VOCs. In this work, biomass-derived nitrogen-doped hierarchical porous carbons (NHPCs) were synthesized by a one-step pyrolysis activation combined with nitrogen doping method from several biomass wastes (corn straw, wheat stalk, bamboo, pine, and corncob). NHPCs have a hierarchical porous structure with micro-meso-macropores distribution, nitrogen doping, large specific surface area, and pore volume. The corncob derived carbon (NHPC-CC) has the best activation result as analyses showed that a lower ash content and higher total cellulose composition content of the biomass result in a better pore activation effect. Single and multi-component dynamic adsorption tests of typical VOCs (benzene, toluene, and chlorobenzene) were conducted on NHPCs in laboratory conditions (∼500 ppm). Promising VOC adsorption capacity and great adsorption kinetics with low mass transfer resistance were found on NHPCs. Correlation analysis showed that the high VOC adsorption capacity and great adsorption kinetics can be attributed to the large surface area of micro-mesopores and the mass transfer channels provided by meso-macropores respectively. The competitive dynamic adsorption tests revealed that the VOC with lower saturated vapor pressure has more adsorption sites on the surface of micro-mesopores and stronger adsorption force, which results in the higher adsorption capacity and desorption caused by substitution reaction in VOCs competitive adsorption process. In detail, the process of toluene and chlorobenzene competitive adsorption was described. Besides, well recyclability of NHPC-CC was revealed as the VOCs adsorption capacity reductions were less than 10% after four adsorption-desorption cycles. All studies showed that the NHPC-CC could be potential adsorbent for VOCs in industrial process.

An achieved strategy for magnetic biochar for removal of tetracyclines and fluoroquinolones: Adsorption and mechanism studies

In this study, poplar wood biochar modified with Fe₃O₄ (MPBC) was prepared using poplar wood as carbon source applied to remove tetracyclines and fluoroquinolones. The adsorption behavior was investigated by batch experiments, and a series of characterization techniques were used to study the corresponding mechanism. Characterizations indicated that pore filling, electrostatic interactions, π-π interaction, surface complexation, and hydrogen bond contributed to the adsorption of antibiotics on MPBC. Most importantly, the thermodynamic experiment results showed that the adsorption capacity of MPBC for tetracyclines (70.28-89.58 mg⋅g^-1) was significantly higher than fluoroquinolones (35.54-60.31 mg⋅g^-1), which was further explained by hydrogen bond interactions calculated from Conductor-like screening model for real solvents (COSMO-RS). In addition, the adsorption between MPBC and antibiotics was favorable at lower ionic strengths and neutral conditions. Conclusively, this study could provide a promising approach to controlling the pollution of tetracyclines and fluoroquinolones.

Bamboo cellulose-derived activated carbon aerogel with controllable mesoporous structure as an effective adsorbent for tetracycline hydrochloride

Activated carbon has been widespread applied in the removal of pollutants in wastewater. However, many biomass-derived activated carbon suffer from the challenge of controllable pore size regulation, hindering their efficient adsorption of pollutants. Herein, bamboo-derived activated carbon aerogel (BACA) has been successfully prepared through KOH high-temperature activation of cellulose aerogel which was prepared using cellulose extracted from bamboo. Bamboo cellulose aerogel provides sufficient reaction sites for KOH, which is conducive to the formation of a mass of mesoporous structures on the pore walls of the activated carbon aerogel. The optimal BACA adsorbent shows high specific surface area (2503.80 m²/g), and maximum adsorption capability for tetracycline hydrochloride (TCH) reaches 863.8 mg/g at 30 ℃. The removal efficiencies of TCH are 100% and 98.4% at 40 ℃ when the initial concentrations are 500 and 700 mg/L, respectively. Adsorption kinetics and isotherm indicate that the adsorption of BACA for TCH is monolayer adsorption based on chemical adsorption. Spontaneous and endothermic adsorption processes are proved by adsorption thermodynamic studies. Additionally, coexisting ions have insignificant effect on TCH adsorption, and the BACA sample displays excellent adsorption property for five reuse cycles with a removal efficiency of 80.95%, indicating the outstanding adsorption capacity of BACA in practical application. The excellent adsorption performance provides BACA with a promising perspective to remove TCH from wastewater, and the prepared method of BACA can be widely extended to other biomass materials.

Synthesis of carbon molecular sieves from agricultural residues: Status, challenges and prospects

Adsorption is the most promising technology used in the gas separation and purification process. The key success of this technology relies on the selection of an adsorbent. Activated carbon and zeolites are the most commonly used adsorbents in the separation of particular gas from gaseous mixtures. Activated carbon deriving from fossil and biomass-based resources has wide pore size distribution and thereby results in lower selectivity. Whereas, zeolites synthesized from natural minerals are expensive which increases the cost of the purification process. Taking this into concern, the quest for synthesizing low-cost and effective adsorbents has gained greater attention in recent years. Carbon Molecular Sieves (CMSs), are considered as an attractive alternative to replace the conventional adsorbents. Furthermore, CMSs exhibit higher selectivity and adsorption capacity, due to their narrow micropore size distribution (0.3-0.5 nm). CMSs are synthesized from any organic carbonaceous precursor with low inorganic content. Since most of the agricultural residues fall under this category, they can be used as a feedstock for CMSs production. The synthesis of CMSs involves three stages: carbonization, activation, and pore modification. In this review, physicochemical characteristics of various agricultural residues, the effects of carbonization process parameters, activation methods, and pore modification techniques adopted for producing CMSs are comprehensively discussed. The effect of deposition temperature, time, and flow rate of depositing agent on pore characteristics of CMSs is briefed. The prospects and challenges in CMSs production are also studied. The insights in this review provide guidelines for synthesizing CMSs from agro-residues.

Efficient removal of cadmium by salts modified-biochar: Performance assessment, theoretical calculation, and quantitative mechanism analysis

Modified biochar is a feasible adsorbent to solve cadmium pollution in water. However, few studies could elucidate the mechanism of cadmium adsorption by biochar from a molecular perspective. Furthermore, traditional modification methods are costly and have the risk of secondary contamination. Hence, several environmentally friendly sodium salts were used to modify the water chestnut shell-based biochar and employ it in the Cd²⁺ adsorption in this work. The modification of sodium salt could effectively improve the specific surface area and aromaticity of biochar. Na₃PO₄ modified biochar exhibited the highest Cd²⁺ adsorption capacity (112.78 mg/g). The adsorption of Cd²⁺ onto biochar was an endothermic, monolayer, chemisorption process accompanied by intraparticle diffusion. Microscopically, the enhancement of aromatization after modification made Cd²⁺ more likely to interact with the regions rich in π electrons and lone pair electrons. This study provided a new research perspective and application guidance for heavy metal adsorption on biochar.

Catalytic pyrolysis of cellulose with biochar modified by Ni-Co-Mn cathode material recovered from spent lithium-ion battery

In this study, we investigated the recycling of Ni-Co-Mn cathode materials from spent LIBs by an acid leaching process using H₃PO₄ and HCl. The leaching liquor was then used to modify the biochar applied during the catalytic pyrolysis of the biomass. The addition of char catalysts decreased the maximum decomposition rate and shifted it to a lower temperature. Accordingly, the activation energy (E_a) of cellulose pyrolysis decreased from 140.86 kJ/mol to 83.55 kJ/mol (char-P) and 89.42 kJ/mol (char-Cl). The char catalysts enhanced the transformation of the large-molecule components to small-molecule gases during cellulose pyrolysis. The addition of both char-P and char-Cl decreased the anhydrosugar content and increased the hydrocarbon content, suggesting their high catalytic activities in converting anhydrosugars to hydrocarbons (e.g., long-chain alkanes). The anhydrosugar content decreased from 17.8% to 11.1%, while the furan content increased from 5.1% to 15.2% with the addition of char-P. The addition of char-Cl resulted in a lower content of furans (4.8%) and a higher content of hydrocarbons (40.1%), mostly because of the increase in alkanes and aromatic compounds. Therefore, these char catalysts could be used for biomass pyrolysis in terms of activation energy reduction and upgrading the quality of the product. This win-win pyrolysis process is a promising pathway for the co-valorization of the cathode materials of spent LIBs and biomass waste.

Two-dimensional activated carbon nanosheets for rapid removal of tetracycline via strong π-π electron donor receptor interactions

Two-dimensional carbonaceous materials have sparked extensive attention in organic pollutants adsorption due to their unique structure to facilitate the formation of the physical or chemical bonding. Herein, natural two-dimensional porous activated carbon nanosheets with ultra-high specific surface area (2276.44 m² g^-1) are prepared by alkaline immersion-assisted circulating calcination techniques from corn straw piths. The prepared nanosheets exhibit rapid tetracycline adsorption capacity (633 mg g^-1 within 5 min) and high equilibrium adsorption capacity of 804.5 mg g^-1. Significantly, the nanosheets can adapt to a wide range of pH (at least between pH = 3-10) and are almost unaffected by coexisting ions. Mechanism studies and theoretical calculations demonstrate that the rapid and high-efficient adsorption of tetracycline mainly depends on the π-π electron donor receptor interactions. In addition, hydrogen bonding and pore filling was also responsible for tetracycline adsorption. This work provides important guidance for the development of the biobased high-performance adsorbents from agricultural waste.

Performance and mechanism of sycamore flock based biochar in removing oxytetracycline hydrochloride

In this study, sycamore flocs (SF), which caused environmental and health problems, were utilized to prepare biochar. SFB_2-900 obtained under the conditions of activation agent K₂CO₃, pyrolysis temperature 900℃ and m(K₂CO₃):m(BC) 2 had the strongest adsorption capacity (730 mg/g) for oxytetracycline hydrochloride (OTC-HCl). The pseudo-second-order kinetic model and Langmuir model described the adsorption kinetics and isotherms best. SFB_2-900 exhibited high OTC-HCl adsorption capacity in both higher ionic strength and wide pH range. The theoretical simulation indicated that the closest interaction distance between OTC-HCl and SFB_2-900 was 2.44 Å via π-π stacking configuration. Pore filling, π-π electron donor acceptor (EDA) interaction, H-bonding and electrostatic interactions were also involved in the process of OTC-HCl removal. SFB_2-900 showed great removal efficiency for OTC-HCl in different water matrices and good regeneration ability. This study solved the problems caused by SF, realized waste biomass recycling, and achieved preparing high-efficient adsorbent for antibiotic.

Pyrolyzing pharmaceutical sludge to biochar as an efficient adsorbent for deep removal of fluoroquinolone antibiotics from pharmaceutical wastewater: Performance and mechanism

This study explored the impact of pyrolysis parameters and modification methods on the characteristics of pharmaceutical sludge biochar, and investigated its capacity and mechanisms for levofloxacin (LEV), a typical fluoroquinolone antibiotics, adsorption. The results showed that S_BET of the biochar was improved with temperature increase, but decreased when temperature reached 900 °C. Under the optimal pyrolysis condition of 800 °C and 90 min, the biochar possessed the highest S_BET of 264.05 m² g^-1, excellent iodine value of 401.41 ± 3.84 mg∙g^-1 and phenol adsorption of 57.36 ± 3.39 mg∙g^-1. Among KOH, ZnCl₂, and CO₂ modifications, ZnCl₂ modification achieved the highest phenol adsorption of 123.40 ± 4.65 mg g^-1, with a significantly improved S_BET of 534.91 m² g^-1. The maximum LEV adsorption capacity of ZnCl₂ modified biochar, PZBC800, reached 159.26 mg g^-1, which overwhelmed the reported sludge biochars. BET, zeta potential, FT-IR, XPS, and Raman analysis, along with quantum chemistry calculation, revealed that pore filling, hydrogen bonding, π-π interaction, surface complexation, and electrostatic interaction were the main mechanisms for the excellent LEV adsorption performance of PZBC800. Deep removal (99.9%) of Fluoroquinolones (FQs) from pharmaceutical wastewater was also achieved by PZBC800 adsorption. The study promoted the development of pharmaceutical sludge biochar preparation and its application in advanced treatment of FQs pharmaceutical wastewater.

Adsorption modeling, thermodynamics, and DFT simulation of tetracycline onto mesoporous and high-surface-area NaOH-activated macroalgae carbon

Activated carbon (ENAC) was prepared by NaOH activation, using macroalgae (Enteromorpha clathrate) as raw material. The prepared activated carbon has a large surface area (1238.491 m² g^-1) and its total pore volume and average pore size are 0.6823 cm³g^-1 and 2.2038 nm, respectively. The ENAC was characterized by SEM, FTIR, BET and XPS. The effects of contact time (0-960 min), initial tetracycline (TC) concentration (50-500 mg L^-1), temperature (30-50 °C) and initial pH (2-11) on TC adsorption were evaluated. The adsorption isotherm and adsorption kinetics were discussed. Results showed that the adsorption isotherm was the Langmuir model, and the adsorption process can be described by the pseudo-second-order model. The N₂ adsorption-desorption isotherm was type IV, indicating that the activated carbon had mesoporous structure. Thermodynamic analysis showed that the adsorption process was endothermic and spontaneous. The maximum adsorption capacity of TC was 381.584 mg g^-1. Density functional theory (DFT) was used to simulate and analyze the adsorption process, and the influence of different types of N on the adsorption was expounded. The results showed that there are electrostatic interactions, π-π interactions and hydrogen bonding between the adsorbent and TC. These results indicated that the prepared ENAC had a great application prospect in the removal of antibiotics from aqueous solution.

One-step synthesis of carbonaceous adsorbent from soybean bio-residue by microwave heating: Adsorptive, antimicrobial and antifungal behavior

In this work, the transformation of soybean industrial bio-residue with limited practical applications, into a multifunctional carbonaceous adsorbent (SBAC) via one-step microwave-irradiation has been succeeded. The surface porosity, chemical compositions, functionalities and surface chemistry were featured by microscopic pore-textural analysis, elemental constitution analysis, morphological characterization and Fourier transform infra-red spectroscopy. The adsorptive performance of SBAC was evaluated in a batch experiment by adopting different classes of water pollutants, specifically methylene blue (MB), acetaminophen and 2,4-dichlorophenoxyacetic acid (2,4-D). The equilibrium uptakes were analyzed with respect to the non-linearized Langmuir, Freundlich and Temkin isotherm equations. The unique features of SBAC, specifically the antimicrobial and antifungal efficacies were examined against gram-positive/negative bacteria and fungi species. An ordered microporous-mesoporous structure of SBAC, with the BET surface area and total pore volume of 1696 m2/g and 0.94 m3/g, respectively, has been achieved. The equilibrium data of MB and acetaminophen were found to be in good agreement with the Langmuir isotherm model, with the monolayer adsorption capacities (Qo) of 434.57 mg/g and 393.31 mg/g, respectively. The adsorptive experiment of 2,4-D was best fitted to the Freundlich isotherm equation, with the Qo of 253.17 mg/g. The regeneration performance of the spent SBAC under microwave-irradiation could maintain at 69.42-79.31%, even after five (5) adsorption-regeneration cycles. SBAC exhibited excellent inhibition efficiencies against gram-positive/negative bacteria and fungi species, with the inhibition zones at 14.0-28.0 mm. This newly developed SBAC appears to be a new powerful candidate for the remediation of different classes of water contaminants, and novel antibacterial and antifungal agents against biological contaminations. The novel concept of "turn waste into wealth" in a cost-effective and energy saving manner for environmental preservation has been successfully accomplished.

Surface modification of spent coffee grounds using phosphoric acid for enhancement of methylene blue adsorption from aqueous solution

In this study, the surface of the spent coffee grounds (SCG) was activated using phosphoric acid to increase the removal efficiency of methylene blue (MB) in aqueous solution, which is one of the harmful substances emitted in industrial processes. According to Fourier transform infra-red analysis, after phosphorylation of the SCG (PSCG), P = O group, P-O-C (aromatic) bond, P = OOH and P-O-P were newly introduced on the surface of the adsorbent, and the peaks of carboxyl groups and OH-group were large and broad. In addition, the surface area and mesopore range of the PSCG adsorbent were increased, and the structure changed, which enabled easy adsorption of MB. The process of adsorbing MB from aqueous solution using PSCG was more suitable for the pseudo-second order and Langmuir models, and the adsorption process was closer to chemisorption than physical adsorption. The maximum adsorption capacity of PSCG was 188.68 mg/g. As a result of the reuse test, PSCG showed excellent performance with a high removal efficiency of 90% up to four consecutive uses. PSCG modified with phosphoric acid, an abundant lignocellulose-based biosorbent that is readily available everywhere, is a promising adsorbent capable of adsorbing MB in aqueous solution.

Mechanism of a double-channel nitrogen-doped lignin-based carbon on the highly selective removal of tetracycline from water

A high-performance nitrogen-doped lignin-based carbon material (ILAC-N) was synthesized using industrial lignin and urea by hydrothermal and activation, as an absorbent of tetracycline hydrochloride (TC). The results showed that the ILAC-N comprises a double-channeled structure with micro and mesopores. It exhibits an excellent adsorption capacity of TC across a wide pH range (pH 2-11), with the highest adsorption capacity of 1396 mg g^-1 at 323 K. Tests in actual wastewater showed that the TC removal rate by ILAC-N exceeded 97.4%. Moreover, it maintained a removal rate of 84% after 10 regeneration cycles, revealing its high reusability. Mechanisms suggested that pore filling and π-π interaction played a critical role in this process. In conclusion, ILAC-N can be broadly applied to livestock manure and pharmaceutical wastewater treatment, owing to its high adsorption capacity, good adsorption properties across a wide pH range, excellent reusability. Furthermore, this research opens a new path for lignin utilization.

High-performance biochar derived from the residue of Chaga mushroom (Inonotus obliquus) for pollutants removal

A high-performance biochar derived from the residue of Chaga mushroom (Inonotus obliquus) was reported in this study. Inonotus obliquus residues were used to prepare biochar, and the optimal synthesis conditions were obtained by response surface methodology. The specific surface area, pore volume, and average pore size of the optimal biochar (Zn-IORBC) was 1676.78 m²/g, 1.87 cm³/g, and 3.88 nm, respectively. Methylene blue (MB) and tetracycline (TC) were selected to estimate the adsorption performance of Zn-IORBC. The adsorption process was suitable for the pseudo-second-order model and Langmuir model. Zn-IORBC could maintained a large amount of TC adsorption (the lowest value was 686.20 mg/g in mountain spring water) in different natural water. The maximum adsorption capacity of TC and MB was 947.42 and 1033.66 mg/g. The adsorption mechanism was contributed to the electrostatic attraction, hydrogen bonding, π-π interactions, and pore-filling. Zn-IORBC is an effective adsorbent for high-performance pollutants removal.

Adsorption of lead and antimony in the presence and absence of EDTA by a new vermiculite product with potential recyclability

A new two-step modification method has been proposed where 1.8% HCl and 3.1% HNO₃ were applied to modify the interlayer of vermiculite (VMT). This product was given 90 °C of heat in 30% H₂SO₄ solution that was used for Pb (II) and Sb (III) adsorption. The EDTA presence on the individual adsorption was assessed. X-ray diffraction revealed that the VMT inter-stratified reflection through acid intercalation within the interlayer decreased the parallel gaps between the atoms, witnessing on the outer-sphere adsorption. The driving force was found electrostatic, which fits well with pseudo-second-order kinetics and Langmuir isotherm. The Pb (II) and Sb (III) uptake followed descending order adsorption with increasing concentration of chelating EDTA. Three consecutive desorption cycles revealed that the prepared adsorbent was suitable that may be regarded as a good candidate for complex wastewaters.

Biodegradable Binary and Ternary Complexes from Renewable Raw Materials

The aim of this paper is to investigate the interactions between polysaccharides with different electrical charges (anionic and neutral starches) and proteins and fats in food ingredients. Another objective is to understand the mechanisms of these systems and the interdependence between their properties and intermolecular interactions. At present, there are not many studies on ternary blends composed of natural food polymers: polysaccharides of different electrical charge (anionic and neutral starches), proteins and lipids. Additionally, there are no reports concerning what type of interactions between polysaccharide, proteins and lipids exist simultaneously when the components are mixed in different orders. This paper intends to fill this gap. It also presents the application of natural biopolymers in the food and non-food industries.

Straw-Based Activated Carbon: Optimization of the Preparation Procedure and Performance of Volatile Organic Compounds Adsorption

Straw is one of the largest agricultural biowastes and a potential alternative precursor of activated carbon. Activated carbon prepared from different types of straw have great differences in structure and adsorption performance. In order to explore the performance of different straw-based activated carbon in volatile organic compounds adsorption, five common straws were selected as potential source materials for the preparation of SAC. The straw-based activated carbons were prepared and characterized via a thermo-gravimetric analysis, scanning electron microscope and the Brunauer–Emmett–Teller method. Among the five straw-based activated carbons, millet straw-derived activated carbon exhibited superior properties in S_BET, S_mic and adsorption capacities of both toluene and ethyl acetate. Furthermore, the preparation process of millet straw activated carbon was optimized via response surface methodology, using carbonization temperature, carbonization time and impregnation ratio as variables and toluene adsorption capacity, ethyl acetate adsorption capacity and activated carbon yield as responses. The optimal preparation conditions include a carbonization temperature of 572 °C, carbonization time of 1.56 h and impregnation ratio (ZnCl₂/PM, w/w) of 1.60, which was verified experimentally, resulting in millet straw activated carbon with a toluene adsorption capacity of 321.9 mg/g and ethyl acetate adsorption capacity of 240.4 mg/g. Meanwhile, the adsorption isothermals and regeneration performance of millet straw activated carbon prepared under the optimized conditions were evaluated. The descriptive ability of the isothermals via the Redlich–Peterson equation suggests a heterogeneous surface on millet straw activated carbon. Recyclability testing has shown that millet straw activated carbon maintained a stable adsorption capacity throughout the second to fifth cycles. The results of this work indicate that millet straw activated carbon may be a potential volatile organic compound adsorbent for industrial application.

Oxytetracycline Adsorption from Aqueous Solutions on Commercial and High-Temperature Modified Activated Carbons

The aim of the work was to evaluate the possibility of using commercial and modified activated carbons for the removal of oxytetracycline from aqueous solutions. The kinetics and statics of adsorption as well as the effect of the activated carbon dose and solution pH on the efficiency of the oxytetracycline adsorption were analyzed. Based on the study of oxytetracycline adsorption isotherms, the activated carbons were ranked in the following order: F-300 > WG-12 > Picabiol > ROW08 > WACC 8 × 30 > F-100 > WAZ 0.6–2.4. The most effective activated carbons were characterized by large specific surfaces. The best matching results were obtained for: Redlich–Peterson, Thot and Jovanovic models, and lower for the most frequently used Freundlich and Langmuir models. The adsorption proceeded better from solutions with pH = 6 than with pH = 3 and 10. Two ways of modifying activated carbon were also assessed. A proprietary method of activated carbon modification was proposed. It uses the heating of activated carbon as a result of current flow through its bed. Both carbons modified at 400 °C in the rotary kiln and on the proprietary SEOW (Joule-heat) modification stand enabled to obtain adsorbents with higher and comparable monolayer capacities. The advantage of the proposed modification method is low electricity consumption.

Novel sodium bicarbonate activation of cassava ethanol sludge derived biochar for removing tetracycline from aqueous solution: Performance assessment and mechanism insight

NaHCO₃ was used as a novel activator to produce cassava ethanol sludge-based biochar. The NaHCO₃-activated biochar showed superior adsorption capacity for tetracycline (154.45 mg/g) than raw biochar (34.04 mg/g). Orthogonal experiments confirmed the optimal preparation conditions of biochar. Increasing adsorbent dosage and temperature facilitated tetracycline removal. The maximum removal was 92.60% at pH = 3.0. Calcium ions and alkalinity decreased tetracycline removal. The time for attaining equilibrium was extended with increasing tetracycline concentration, but the equilibrium could be completed within 24 h. Langmuir model fitted the equilibrium data well. Kinetics process followed the Elovich model. The adsorption rate was controlled by both intraparticle and liquid film diffusion and the process was endothermic and spontaneous. The electrostatic attraction, hydrogen bonding, π-π interactions, and pore-filling were involved in the adsorption mechanism. The findings may provide an underlying guide for sludge disposal and removal of tetracycline from wastewater in practical application.

High mesoporosity phosphorus-containing biochar fabricated from Camellia oleifera shells: Impressive tetracycline adsorption performance and promotion of pyrophosphate-like surface functional groups (C-O-P bond)

In China, more than 3.5 million tons of Camellia oleifera discarded shells are produced every year. This work first prepared phosphorus-containing biochar (PBC) from C. oleifera shells and was successfully applied to the efficient removal of tetracycline (TC) from solutions. The prepared PBC exhibits superior TC adsorption capacity of 451.5 mg/g, and TC uptake rapidly reached 315.5 mg/g at the first 5 min (C₀ = 50 mg/L). Furthermore, PBC also shows excellent applicability to the broad range pH value (1-9) and superior selective removal in the presence of various high concentration coexisting ions (1 mM). Mechanisms underlying TC adsorption were also put forward, and analysis suggested that pyrophosphate-like surface functional groups (C-O-P bond) played a critical role in this process. Notably, treating pharmaceutical wastewater with PBC can efficiently reduce chemical oxygen demand (COD) and total organic carbon (TOC) concentration below the discharge standard of China (GB21904-2008).

Highly effective adsorption of antibiotics from water by hierarchically porous carbon: Effect of nanoporous geometry

Pharmaceutical antibiotics have recently become emerging environmental contaminants. To enhance the removal efficiency of antibiotics in water, hierarchically porous carbons (HPCs) with designed porous patterns are used in both batch and column mode adsorption processes in this study, and the role of their nanoporous geometry in the adsorption dynamics are explored. THPC (HPC with trimodal pores) and DHPC (HPC with bimodal pores) exhibit remarkably superior adsorption performances to the selected antibiotics than those of commercial activated carbon (AC) with similar surface area, especially in column mode adsorption. The effective treatment volumes of the HPC-columns remain up to 8-10 times those of the AC-columns for the removal of tetracycline and 4-6 times for the removal of tylosin. The mass transfer rates of the carbon-based columns present the order of THPC > DHPC > AC. As comparison, the columns based on monomodal mesoporous carbon (MEC) and microporous carbon (MAC) exhibit low effective treatment volumes although their high mass transfer speed. The interconnected meso/macropores in HPCs benefit the intraparticle mass transfer of guest molecules and the accessibility of adsorption sites. The micropores linking to the meso/macropores not only provide adsorption sites but also facilitate adsorption affinity.

Effectively removing tetracycline from water by nanoarchitectured carbons derived from CO2: Structure and surface chemistry influence

Understanding of the correlation between physico-chemical property of adsorbent and the adsorption performance of contaminant is very significant for developing high-efficient materials to remove antibiotic contamination from water. In this work, a novel kind of carbon adsorbent (EC) derived from CO₂ and activated ECs with modified structure via a facile chemical method using H₂ and KOH were prepared. The synthetic carbon materials (EC, EC-H₂, and EC-KOH) were then applied to remove tetracycline (TC). The kinetics of adsorption for these three carbon materials all well fitted the pseudo-second-order kinetic model. The experimental data of adsorption isotherm had good compatibility with Langmuir and Freundlich models (R² > 0.90), but the Temkin model was the most applicable for all adsorbents (R² > 0.98). A super-high adsorption capacity of EC-KOH obtained from Langmuir fitting was 933.56 mg g^-1, which was much higher than that of EC-H₂ (538.91 mg g^-1) and EC (423.30 mg g^-1), possibly due to its larger specific surface area (S_BET), pore volume, and specific surface chemical structure. Moreover, it was found that surface functional groups and large aperture of adsorbents had a positive effect on adsorption rate. More adsorption sites and surface functional groups of adsorbents were beneficial to enhance the adsorption affinity. These results are of great benefit to the directional control of carbon structure to increase the adsorption performance in rate, capacity, and affinity of antibiotics.

Increasing straw surface functionalities for enhanced adsorption property

A simple low-temperature partial-oxidation process was demonstrated as an effective technology for reed straw modification towards environmental remediation. At an optimal temperature of 180 °C, the straw materials exhibited a remarkable colour change from light yellow to dark brown, increased methylene blue (MB) uptake by 1.8 times, enhanced removal efficiency from 34.5% to 92.8%, and a high yield of 77.2%. Spectroscopic characterization and Boehm titration proved that the amount of surface oxygen (O)-containing functional groups significantly increased after modification. A strong linear correlation (R² = 0.93) existed between total amounts of O-containing functional groups and MB uptake for modification temperatures below 180 °C, whereas blockage of the pore entrances and competition with metallic cations must be taken into account for samples generated from excess heating (>180 °C). These results provided insights into designing promising technologies for sustainable environmental management through reutilization of agricultural waste.

Insights into the structure-performance relationships of extraction materials in sample preparation for chromatography

Sample preparation is one of the most crucial steps in analytical processes. Commonly used methods, including solid-phase extraction, dispersive solid-phase extraction, dispersive magnetic solid-phase extraction, and solid-phase microextraction, greatly depend on the extraction materials. In recent decades, a vast number of materials have been studied and used in sample preparation for chromatography. Due to the unique structural properties, extraction materials significantly improve the performance of extraction devices. Endowing extraction materials with suitable structural properties can shorten the pretreatment process and improve the extraction efficiency and selectivity. To understand the structure-performance relationships of extraction materials, this review systematically summarizes the structural properties, including the pore size, pore shape, pore volume, accessibility of active sites, specific surface area, functional groups and physicochemical properties. The mechanisms by which the structural properties influence the extraction performance are also elucidated in detail. Finally, three principles for the design and synthesis of extraction materials are summarized. This review can provide systematic guidelines for synthesizing extraction materials and preparing extraction devices.

Removal of Tetracycline from Water Using Activated Carbon Derived from the Mixture of Phragmites australis and Waterworks Sludge

Sludge-based activated carbon with doped Phragmites australis was prepared using an environment-friendly method to treat waterworks sludge (WS) and obtain an economical adsorbing material for tetracycline (TC) elimination. For the WS, P. australis was used as an additive to optimize the preparation of activated carbon. Optimum preparation conditions were as follows: activation temperature, 600 °C; ZnCl₂ concentration, 3 mol/L; activation time, 50 min; impregnation ratio (weight of mix sample: weight of ZnCl₂) of 1:2.5; and the mixed ratio of P. australis with WS, 40%. The obtained activated carbon owned well-developed Brunauer-Emmett-Teller surface area (949.90 m²/g). The acidic and basic functional groups were improved to 0.762 and 0.016 mmol/g, respectively. The pseudo-second-order kinetic and Freundlich isotherm equations were more suitable models to simulate adsorption with the maximum adsorption capacity of 153.4 mg/g. According to the thermodynamic parameters, the adsorption process was spontaneous and endothermic. Electrostatic interaction, hydrogen bonding formation, and ion complexation adsorption mechanisms were the mechanisms underlying the adsorption of TC.

Phosphoric Acid Activated Carbon from Melia azedarach Waste Sawdust for Adsorptive Removal of Reactive Orange 16: Equilibrium Modelling and Thermodynamic Analysis

Waste wood biomass as precursor for manufacturing activated carbon (AC) can provide a solution to ever increasing global water quality concerns. In our current work, Melia azedarach derived phosphoric acid-treated AC (MA-AC400) was manufactured at a laboratory scale. This novel MA-AC400 was tested for RO16 dye removal performance as a function of contact time, adsorbent dosage, pH, temperature and initial dye concentration in a batch scale arrangement. MA-AC400 was characterized via scanning electron microscopy, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, dynamic light scattering (DLS) and fluorescence spectroscopy. MA-AC400 is characterized as mesoporous with BET surface area of 293.13 m² g^-1 and average pore width of 20.33 Å. pH_PZC and Boehm titration confirm the acidic surface charges with dominance of phenolic functional groups. The average DLS particle size of MA-AC400 was found in the narrow range of 0.12 to 0.30 µm and this polydispersity was confirmed with multiple excitation fluorescence wavelengths. MA-AC400 showed equilibrium adsorption efficiency of 97.8% for RO16 dye at its initial concentration of 30 mg L^-1 and adsorbent dose of 1 g L^-1. Thermodynamic study endorsed the spontaneous, favorable, irreversible and exothermic process for RO16 adsorption onto MA-AC400. Equilibrium adsorption data was better explained by Langmuir with high goodness of fit (R², 0.9964) and this fitness was endorsed with lower error functions. The kinetics data was found well fitted to pseudo-second order (PSO), and intra-particle diffusion kinetic models. Increasing diffusion constant values confirm the intraparticle diffusion at higher RO16 initial concentration and reverse was true for PSO chemisorption kinetics. MA-AC400 exhibited low desorption with studied eluents and its cost was calculated to be $8.36/kg.