Valorization of spent brewery yeast biosorbent with sonication-assisted adsorption for dye removal in wastewater treatment

Preparation of amino-functionalized yeast/yam starch composite adsorption gel and its mechanism for the adsorption of Congo red and copper ions

Water resource pollution is a major global challenge that poses a serious threat to human health and the environment. In this study, glutaraldehyde was used to cross-link polyethyleneimine (PEI) with yeast and starch. The PEI-modified yeast was attached to the yam starch adsorption gel using the gel properties of starch to prepare a novel starch-based composite adsorbent material (NH2(Gl)-YSA@SZ410). Owing to its porous interconnected structure, the material exhibited optimal adsorption performance, wettability, and mechanical properties. NH2(Gl)-YSA@SZ410 could remove Congo red (CR), Cu2+, and coexisting pollutants (CR and Cu2+ mixture) from solutions. At 308 K, in single CR- or Cu2+-contaminated solutions, the maximum adsorption capacities were 293.52 and 50.34 mg/g, respectively, whereas in the binary-pollutant system, the maximum adsorption capacities were 363.15 and 149.50 mg/g, respectively. Additionally, an in-depth study of single-pollutant and binary-pollutant systems was conducted using adsorption kinetics, isotherms, and adsorption mechanisms. Theoretical calculations indicated that CR and Cu2+ interacted with NH2(Gl)-YSA@SZ410 composite materials through forces such as hydrogen bonding and electrostatic interactions. Furthermore, NH2(Gl)-YSA@SZ410 exhibited excellent stability and practicality. The adsorbent can be effectively applied to wastewater containing both heavy metals and dyes, offering novel ideas for biobased adsorbents.

Advances in the valorization of brewing by-products

Beer is the most consumed alcoholic beverage worldwide, and its production involves the generation of a huge volume of by-products (i.e., spent grain, spent hop, and spent yeast). This review aims to highlight the main properties of these by-products as a valuable source of biomolecules (i.e., proteins, cellulose, hemicellulose, lignin, phenolic compounds, and lipids) and the biorefining methods used in the last decade for their valorization. The pros and cons of the technologies employed will be shown, highlighting which of them could be more ready for the transition to an industrial scale, and which applications (e.g., food and feed, bioenergy, biochemicals, and biomaterials) are the most feasible.

Robustic and hybrid cobalt doped BaFe12O19 hexaferrites for the photocatalytic degradation of Congo Red for wastewater treatment

The industrial sector faces a significant challenge in finding the highly effective and efficient treatments for harmful dye-based color effluents. In this study, pure and cobalt doped barium hexaferrite of chemical formula, Ba1-xCoxFe12O19 (x = 0-0.06) are made via sol-gel auto-combustion (SC) methodology. These nano hexaferrite based catalysts are employed for the photodegradation of Congo Red (CR) pollutant. X-rays diffraction investigation confirms the creation of pristine M-type with a hexagonal structure for the prepared hexaferrites. Field emission scanning electron microscopy analysis shows the existence of the hexagonal-shaped grains with well-defined grain boundaries. The reduction in the band gap of prepared hexaferrites are observed with the cobalt doping which is helpful in enhancing the photocatalytic performance. The X-ray photoelectron spectroscopy examination verifies the oxidation states of all elements found in the fabricated specimens. From the photocatalytic measurements, it is observed that the CR dye attains the removal percentage of 87.90%, 90.73%, 91.86% and 94.88% for the BaFe12O19 (x = 0.00), Ba0.08Co0.02Fe12O19 (x = 0.02), Ba0.06Co0.04Fe12O19 (x = 0.04), and Ba0.04Co0.06Fe12O19 (x = 0.06) hexaferrites under the natural sunlight of two hours. In addition, the reusability potential of prepared hexaferrites is also studied over the six consecutive experimental cycles. The excellent photodegradation performance of the Co- doped barium M-type hexaferrites for the removal of CR dye makes them highly useful for the wastewater remediation.

A comparative study on the malachite green dye adsorption of chemically synthesized and green MgFe2O4 nanoparticles using gerbera floral waste extract

The situation of discharging a large amount of dyes from the textile industries has caused many adverse effects on human health and the ecosystems. Emerging bio-nanomaterials represent a new trend in efficient dye removal in aqueous media. Herein, we mention that MgFe2O4 bioprepared using gerbera extract has been successfully used to adsorb malachite green (MG) in water. A comparison was made to determine the dye removal efficiency between biogenic MgFe2O4 (MFOB) and chemical MgFe2O4 (MFOC). The spherical MFOB material exhibited a large surface area of 85.0 m2 g-1 and high crystallinity. The obtained outcomes showed that the highest adsorption capacity of MG dye was 584.49 mg g-1 at a MFOB dose of 0.05 g L-1 and MG concentration of 10 mg L-1. Higher correlation coefficients in the Langmuir isotherm suggested monolayer adsorption of MG. The Box-Behnken design and response surface method were established to optimize MG removal percentage under the conditions, i.e., initial MG concentration (10-30 mg L-1), adsorbent dose (0.02-0.08 g L-1), and pH of dye solution (6-8). MFOB had good reusability with high removal efficiencies after three continuous cycles. Post reuse, this adsorbent still showed excellent stability through the verification of their structural properties in comparison with fresh MFOB, showing potential for practical applications.

Adsorption of cationic/anionic dyes and endocrine disruptors by yeast/cyclodextrin polymer composites

Factory and natural wastewaters contain a wide range of organic pollutants. Therefore, multifunctional adsorbents must be developed that can purify wastewater. Phytic acid-cross-linked Baker's yeast cyclodextrin polymer composites (IBY-PA-CDP) were prepared using a one-pot method. IBY-PA-CDP was used to adsorb methylene blue (MB), bisphenol A (BPA), and methyl orange (MO). Studies on the ionic strength and strongly acidic ion salts confirmed that IBY-PA-CDP adsorbs MO through hydrophobic interactions. This also shows that Na+ was the direct cause of the increased MO removal. Adsorption studies on binary systems showed that MB/MO inhibited the adsorption of BPA by IBY-PA-CDP. The presence of MB increased the removal rate of MO by IBY-PA-CDP due to the bridging effect. The Langmuir isotherm model calculated the maximum adsorption capacities for MB and BPA to be 630.96 and 83.31 mg g-1, respectively. However, the Freundlich model is more suitable for fitting the experimental data for MO adsorption. To understand the rate-limiting stage of adsorption, a mass-transfer mechanism model was employed. The fitting results show that adsorption onto the active sites is the rate-determining step. After five regeneration cycles, IBY-PA-CDP could be reused with good stability and recyclability.

Molecularly Imprinted Polymers Using Yeast as a Supporting Substrate

Molecularly imprinted polymers (MIPs) have gained significant attention as artificial receptors due to their low cost, mild operating conditions, and excellent selectivity. To optimize the synthesis process and enhance the recognition performance, various support materials for molecular imprinting have been explored as a crucial research direction. Yeast, a biological material, offers advantages such as being green and environmentally friendly, low cost, and easy availability, making it a promising supporting substrate in the molecular imprinting process. We focus on the preparation of different types of MIPs involving yeast and elaborate on the specific roles it plays in each case. Additionally, we discuss the advantages and limitations of yeast in the preparation of MIPs and conclude with the challenges and future development trends of yeast in molecular imprinting research.

Living membrane bioreactor for highly effective and eco-friendly treatment of textile wastewater

The treatability of synthetic textile wastewater containing model dyes, such as reactive black and direct black dye (25.0 ± 2.6 mg_dye/L), with chemical oxygen demand (COD, 1000 ± 113 mg/L), ammonia‑nitrogen (NH₃-N, 140 ± 97 mg/L) and sulphate ions (SO₄^2-, 1357 ± 10.86 mg/L) was investigated in this study using an innovative living membrane bioreactor (LMBR) using an encapsulated self-forming dynamic membrane (ESFDM). The key advantage of ESFDMBR is the self-forming of the biological filtering layer protected between two meshes of inert robust and inexpensive material. A laboratory scale bioreactor (BR) equipped with a filtering unit mounting polyester meshes with a pore size of 30 μm, operated at an influent flux of 30 LMH was thus used. After the formation of the biological living membrane (LM), the treatment significantly reduced COD and DOC concentrations to the average values of 34 ± 10 mg/L and 32 ± 7 mg/L, corresponding to reduction efficiencies of 96.0 ± 1.1 % and 94 ± 1.05 %, respectively. Throughout the LMBR operation, the colours were successfully removed from synthetic textile wastewater with an overall removal efficiency of about 85.0 ± 1.8 and 86.0 ± 1.9 % for direct and reactive dyes, respectively. In addition, the proposed system was also found effective in affording removal efficiency of ammonia (NH₃) of 97 ± 0.5 %. Finally, this treatment afforded circa 40.7 ± 5.8 % sulphate removal, with a final concentration value of 805 ± 78.61 mg/L. The innovative living membrane, based on an encapsulated self-forming dynamic membrane allows a prolonged containment of the membrane fouling, confirmed by investigating the concentration of membrane fouling precursors and the time-course variations of turbidity and transmembrane pressure (TMP). Those final concentrations of wastewater pollutants were found to be below the limits for admission of the effluents in public sanitation networks in Italy and Tunisia, as representative countries for the regulation in force in Europe and North Africa. In conclusion, due to the low costs of plant and maintenance, the simple applicability, the rapid online implementation, the application of LMBR results in a promising method for the treatment of textile wastewater.

Efficient one-pot synthesis of magnetic MIL-100(Fe) using nitric acid without additional Fe ion addition and adsorption behavior of charged organic compounds

Metal organic frameworks (MOFs) are attracting attention as high-performance adsorbents because of their high specific surface area and porosity. In particular, magnetic MIL-100(Fe) has the both characteristics of Fe₃O₄ and MIL-100(Fe), which are magnetic characteristics, high specific surface area and open metal sites. However, multiple synthetic steps are required for synthesis of magnetic MOF, and there is limitation that the residual organic linker and unreacted Fe center ions can be discharged, and they cause water pollution. In this study, magnetic MIL-100(Fe) was synthesized within 4 h without the addition of Fe ions by using nitric acid for the surface modification of Fe₃O₄. Magnetic MIL-100(Fe) was confirmed through XRD, FTIR, and TEM surface analysis, and the optimal conditions for nitric acid addition were selected through magnetization measurements and BET analysis of synthesized magnetic MIL-100(Fe). Thereafter, adsorption evaluation was performed using MB and MO, which are representative cationic and anionic dyes, respectively. The pseudo-second-order Langmuir model showed a relatively high correlation compared to the other models. This shows that the adsorption mechanism depends on both the amount of adsorbent and adsorbate, and Fe₃O₄ modification with nitric acid does not cause any change in the adsorption mechanism. In the case of adsorption selectivity between the MB and MO, removal rates of 93.27% and 58.73% were obtained, respectively. The above results can contribute to the simplification of the manufacturing of magnetic metal organic frameworks for removing ionic organic compounds and the minimization of water pollution in the manufacturing process.

Amino-functionalization of lignocellulosic biopolymer to be used as a green and sustainable adsorbent for anionic contaminant removal

In this work, natural biopolymer stemming from lignocellulosic peanut hull biomass was used as a green and low-cost adsorbent to eliminate anionic Congo red (CR) and Cr(VI) ions from aqueous sample. In order to enhance the removal performance, the lignocellulosic biopolymer was subjected to amino-modification by the graft copolymerization of (3-acrylamidopropyl) trimethylammonium chloride and N, N'-methylenebisacrylamide. The property of the prepared amino-functionalized biopolymer (AFB) was examined through FTIR, TG, SEM, particle size analysis, zeta potential determination and XPS. The adsorption efficacy of AFB for CR and Cr(VI) was tested at different pH, contact time and initial concentration. The kinetic, isotherm and thermodynamics investigations revealed that the uptakes of CR and Cr(VI) were the combination processes of chemical and physical interactions, and both endothermic in nature. The AFB exhibited good reusability without significant loss in adsorption capacity after five consecutive cycles. Mechanistic analysis indicated that the quaternary ammonium groups in AFB contributed a lot to the binding of anionic compounds through electrostatic attraction. In addition, n-π and hydrogen bonding while reduction and coordination were also responsible for the removal of CR and Cr(VI), respectively. The present study provides a favorable strategy for the removal of anionic contaminates in water by using green and sustainable lignocellulosic wastes.

Combined Effect of Ultrasound Treatment and a Mix of Krebs Cycle Acids on the Metabolic Processes in Saccharomyces cerevisiae

This article describes the effect of organic acids and ultrasound on the physiological and biochemical properties of yeast, which was used to obtain biologically active peptides. The research featured brewer’s yeast S. cerevisiae W-34/70 cultivated in 11% beer wort. A mix of Krebs cycle acids served as an activator. It included succinic, malic, fumaric, citric, and oxaloacetic acids (1:1:1:1:1). The concentration of the Krebs cycle acids was 1 × 10−10 M/L at 1% to the suspension volume. The ultrasound treatment had an intensity of 10 W/m2 and lasted 3–10 min. The combined effect increased the fermentation activity of the yeast by 98%. The activity of individual biocatalysts of constructive and energy metabolism rose by 108–330%, while that of proteolysis enzymes increased by 15% in comparison with the samples exposed to individual factors. The stimulation increased the rate of amine nitrogen consumption by the yeast. The amount of accumulated amino acids was larger by 80% than in the control, and that of protein larger by 7%. The maximal content of the synthesized protein was reached 1–2 h earlier. The combination of chemical and physical factors intensified the biosynthesis of protein and its intermediates during yeast processing, thus facilitating the subsequent extraction of biologically valuable components.

Preparation and Superstrong Adsorption of a Novel La(Ⅲ)-Crosslinked Alginate/Modified Diatomite Macroparticle Composite for Anionic Dyes Removal from Aqueous Solutions

In order to solve the problem of dye pollution of the water environment, a green macroparticle composite (CPAM-Dia/SA-La) as a bioadsorbent was prepared through a sodium alginate (SA) reaction with a polyacrylamide (CPAM)-modified diatomite (Dia) and further La(III) ion crosslinking polymerization, and characterized by various analytical methods. The important preparation and adsorption conditions of the composite were explored by the adsorption of Acid blue 113 (AB 113) and Congo red (CR) dyes. The dye adsorption efficiency was evaluated. The results show that CPAM-Dia/SA-La composite prepared under the optimized conditions displays superstrong adsorption capacities of 2907 and 1578 mg/g for AB 113 and CR and almost 100% removal efficiency within 60 min adsorption time at pH 2.0 and 298 K, and they decrease slightly with the pH increase to 10. The fitting of equilibrium data to the Langmuir model is the best and the adsorption kinetic processes can be expressed by the Pseudo-second-order kinetic model. The adsorption processes are both spontaneous and exothermic. The analysis results of FT-IR and XPS revealed that the superstrong adsorption of CPAM-Dia/SA-La for dyes. The composite adsorbed by the dye can be recycled. CPAM-Dia/SA-La is a promising biosorbent for dye wastewater treatment.

Facile synthesis of multifunctional C@Fe3O4-MoO3-rGO ternary composite and its versatile roles as sonoadsorbent to ameliorate triphenylmethane textile dye and as potential electrode for supercapacitor applications

The toxic wastewater effluents from textile dyes have been a significant environmental threat worldwide in recent decades. Against this backdrop, this study investigates the performance of C@Fe3O4-MoO3-rGO as a sonoadsorbent to ameliorate crystal violet (CV) dye from the aqua matrix and further explores its potential as an electrode in supercapacitor applications. The phase purity, crystal structure, surface morphology, thermal stability and magnetic behaviour characteristics of the composite were studied using various characterisation techniques such as powder X-ray diffraction (XRD), Raman Spectroscopy, Fourier transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FESEM), High-resolution transmission electron microscopy (HRTEM), Thermogravimetric analysis (TGA) and Vibrating-sample magnetometry (VSM). From the Langmuir isotherm model, the synthesised sonoadsorbent exhibited a maximum adsorption capacity of 1664.26 mg/g for crystal violet, which is remarkably high. Further, to its inherited magnetic characteristics, the composite can be easily separated from the solution by using an external magnet. Furthermore, the working electrode was synthesised with 80% active material, 10% carbon black, and 10% polyvinylidene difluoride to investigate its suitability in supercapacitor applications. The C@Fe3O4-MoO3-rGO composite exhibited an excellent capacitance value of 180.36 F/g with commendable cycling stability, making it suitable as a potential cathode material for the next generation supercapacitors.

Cadmium resistance, microbial biosorptive performance and mechanisms of a novel biocontrol bacterium Paenibacillus sp. LYX-1

In this study, a novel biocontrol bacterium was isolated and identified as Paenibacillus sp. LYX-1 from soils in the peach orchard. Both Cd²⁺ resistance and biosorption behavior of strain LYX-1 was explored. Meanwhile, the Cd²⁺ resistance and biosorption mechanisms were further identified by Cd-resistant genes, SEM-EDS, FTIR, XPS, and TEM analysis. The results showed that strain LYX-1 could resist 50 mg/L Cd²⁺ and had the CzcD gene responsible for Cd²⁺ efflux. Under pH 8.0 and at a dose of 1.0 g/L sorbent dose, the removal efficiencies of living and dead cells were as high as 90.39% and 75.67% at 20 mg/L Cd²⁺, respectively. For the adsorption isotherm test, results revealed that both Langmuir (R² = 0.9704) and Freundlich (R² = 0.9915) model could describe the Cd²⁺ biosorption well for living strain LYX-1. The maximum equilibrium biosorption capacities of living and dead biomass were 30.6790 and 24.3752 mg/g, respectively. In the adsorption kinetic test, the adsorption process of both living and dead strain LYX-1 all satisfied the pseudo-second kinetic equation. A desorption study showed that strain LYX-1 sorbents could be recycled and regenerated by eluents efficiently. SEM-EDS analysis reflected that Cd²⁺ was bound to the cell wall. Besides, the biosorption process was controlled by chemisorption with the participation of the -OH, -NH, -C = O, O = C-O, C-N, S^2-, and phosphate functional groups on the cell surface of strain LYX-1, which were identified by FTIR and XPS. Bioaccumulation also made a contribution to the Cd²⁺ removal during the biosorption process of living sorbent. The above results indicated that strain LYX-1 had higher Cd²⁺ tolerance and Cd²⁺ removal capacity. This strain exhibits promising application to the removal of Cd²⁺ in the Cd-contaminated environment.

Full factorial design and dynamic modelling of silent and ultrasound-assisted lead and cadmium removal by porous biosorbent

Present work aimed to analyse single and competitive lead and cadmium batch adsorption, using experimental studies and mathematical modelling. The experiments were conducted in silent and ultrasound-assisted systems, in aqueous environment, using grinded hazelnut shells as porous biosorbent. The influence of process factors (pH, adsorbent concentration, adsorbent particle size, and initial species concentration in liquid phase) on species removal efficiency was evaluated when process equilibrium was attained. The statistical study, following a 2⁴ factorial experimental design, allowed the development of a model to predict variables influence. Based on the obtained results a deeper analysis of the separation efficiency, depending on process factors, was conducted. The dynamic study was performed based on experimentally obtained removal rates, modelled considering species diffusion, with reversible kinetics of sorption inside solid particles. Hence, the dynamics of removal efficiency was determined for several representative experiments. The equilibrium isotherms data, best fitted by an appropriate Langmuir model, were used in the dynamic model to reduce the number of model parameters which normally require experimental identification.