The COVID-19 pandemic reshapes the plastic pollution research - A comparative analysis of plastic pollution research before and during the pandemic

Construction of Multifunctional Composite Films with Biomimetic Bridging and Stress Dissipation Properties

Strategies based on biodegradable polymers to replace traditional petroleum-based plastics have become research hotspots, while designing multifunctional composite films as packaging materials remains a challenging task. Herein, mussel-inspired hollow mesoporous polydopamine (HMPDA) is prepared and used as a secondary reaction platform to immobilize silver nanoparticles (HMPDA@Ag), which are then co-doped into a polyvinyl alcohol (PVA) matrix in combination with naturally derived 2D montmorillonite (MMT). Benefiting from the noncovalent interactions between the composite particles and MMT with the PVA matrix, as well as the synergistic effects between nanofillers, the fabricated films exhibit a great tensile strength of 424.7 MPa, a high toughness of 1093.7 MJ m-3, and a significantly improved water barrier property. HMPDA@Ag nanoparticles endow the film with excellent properties such as a photothermal synergistic antibacterial effect, ultraviolet shielding, and antioxidation. Additionally, the developed films exhibit significantly improved flame retardancy. Compared with pure PVA, the reduction in peak heat release rate (PHRR) and total heat release (THR) reaches 8.2% and 19.5%, respectively, alongside a notable inhibition of smoke release and melt dripping behavior. This work provides a novel idea for manufacturing multifunctional PVA-based composite films to reduce the environmental impact resulting from the excessive use of non-biodegradable, petroleum-based packaging materials worldwide.

Ghana's environmental law and waterbody protection: A critical assessment of plastic pollution regulations

Plastic pollution poses significant environmental, economic, and health risks to waterways globally, including Ghana. The paper examines the legislative responses to plastic pollution in Ghana's rivers, lakes, and coastal areas, focusing on enhancing policy interventions across Africa and other regions with similar challenges. The paper further analyzes key legislative instruments and regulatory frameworks in terms of their evolution and effectiveness in sustainably addressing plastic waste pollution in Ghana, offering insights into how these approaches can be scaled regionally or globally. International and regional treaties such as the Stockholm Convention on Persistent Organic Pollutants, the Basel Convention on the Control of Transboundary Movements of Hazardous Wastes and their Disposal, and the Bamako Convention on the Ban of the Import into Africa and the Control of Transboundary Movement and Management of Hazardous Wastes within Africa have influenced the legislative and regulatory landscape in Ghana. The prevailing national laws, including the Environmental Protection Agency Act of 1994, the Hazardous and Electronic Waste Control and Management Act of 2016, and the National Plastic Management Policy are examined to determine their level of compliance with the international and regional mechanisms. The major challenges - normative and institutional - in implementing and enforcing these laws are identified. The study advances strategic reforms for enhancing the legal and institutional framework for addressing plastic pollution and protecting waterways. It argues for the adoption of comprehensive and precise legislation, effective enforcement mechanisms, and improved waste management infrastructure, with lessons applicable to both regional and international environmental governance.

Research on the global trends of COVID-19 associated acute kidney injury: a bibliometric analysis

Critically ill COVID-19 patients may exhibit various clinical symptoms of renal dysfunction including severe Acute Kidney Injury (AKI). Currently, there is a lack of bibliometric analyses on COVID-19-related AKI. The aim of this study is to provide an overview of the current research status and hot topics regarding COVID-19 AKI. The literature was retrieved from the Web of Science Core Collection (WoSCC) database. Subsequently, we utilized Microsoft Excel, VOSviewer, Citespace, and Pajek software to revealed the current research status, emerging topics, and developmental trends pertaining to COVID-19 AKI. This study encompassed a total of 1507 studies on COVID-19 AKI. The United States, China, and Italy emerged as the leading three countries in terms of publication numbers, contributing 498 (33.05%), 229 (15.20%), and 140 (9.29%) studies, respectively. The three most active and influential institutions include Huazhong University of Science and Technology, Wuhan University and Harvard Medical School. Ronco C from Italy, holds the record for the highest number of publications, with a total of 15 papers authored. Cheng YC's work from China has garnered the highest number of citations, totaling 470 citations. The co-occurrence analysis of author keywords reveals that 'mortality', 'intensive care units', 'chronic kidney disease', 'nephrology', 'renal transplantation', 'acute respiratory distress syndrome', and 'risk factors' emerge as the primary areas of focus within the realm of COVID-19 AKI. In summary, this study analyzes the research trends in the field of COVID-19 AKI, providing a reference for further exploration and research on COVID-19 AKI mechanisms and treatment.

Impact of COVID-19 pandemic on microplastic occurrence in aquatic environments: A three-year study in Taihu Lake Basin, China

The impact of the Coronavirus Disease 2019 (COVID-19) pandemic on microplastic (MP) occurrence in aquatic environments deserves an in-depth study. In this study, the occurrence of MPs and environmental flux of plastics before (2019) and during (2020 and 2021) the pandemic were comparatively investigated in various aquatic compartments in the Taihu Lake Basin in China. The field-based investigations from 2019 to 2021 for Taihu Lake have shown that, at the onset of the outbreak, the MP abundance declined at a rate of 62.3 %, but gradually recovered to the pre-pandemic level. However, the amount of plastics being released into aquatic environments showed a declining trend in 2020 and 2021 compared to those in 2019, with decrease rates of 13.7 % and 15.8 %, respectively. Characterization analysis of MP particles and source apportionment framework implied that while the contributions of tire abrasion and domestic waste to MP occurrence were depleted owing to the reduction in human activity during the pandemic, weathering and fragmentation of retained plastics contributed to the recovery of stored MPs. This study provides insights into the anthropogenic influences on MP occurrence, and supports policymakers in managing and controlling plastic contamination in large freshwater systems in the "new normal" phase.

Journalists in a circular economy: Stakeholders' engagement in the media discourse on single-use plastics during the COVID-19 pandemic

The world faces an alarming plastic waste problem. The volume of plastic waste is rapidly and continuously increasing, mainly due to the single-use plastics overconsumption, whereas its recycling and utilization leave much to be desired. Despite the negative effects of plastic on the environment and public health, the COVID-19 outbreak shifted the public attention away from the environmental issues, potentially giving space for extended lobbyism by interest groups and industry to delay or even prevent legislation to combat plastic pollution. Our study aims to understand how the media discourse on single-use plastic (SUP) in particular, evolves in the course of the pandemic. How it vary across EU Member States? For this purpose, we specifically analyse plastic-related articles in major prestigious daily newspapers published between June 2019 and June 2021 in four EU Member States: Germany, France, Italy, and Poland, as countries with different levels of sustainable transition to form a representative model of an European context. Additionally, between November 2022 and January 2023, we conducted a series of interviews via Google Meet, with journalists who agreed to be asked on the plastic issues they upraised. Our analysis initially covered 1076 articles, out of which 198 articles were rejected due to non-compliance with the subject or repetition, leaving 878 articles forming the database for eventual analysis. Specifically, we outline a key impact of the COVID-19 pandemic followed by a clear evolution on the number of plastic-related articles, on related stakeholder engagement, and the focus on specific SUP items. Moreover, we address a research gap - presenting a media portrait of different types of SUP in more details and highlighting the significance based on several culturally and linguistically very different countries within a single supranational state (EU). A clear trend reversal towards an informed knowledge circulation across the circular economy model of single-use plastics is ultimately essential to develop sustainable solutions to reject the disposable culture, stop the waste of natural resources, and reduce the consumption of oil or gas for plastic production and thus protect the climate.

Trends on adsorption of lead (Pb) using water hyacinth: Bibliometric evaluation of Scopus database

Heavy metals (Cd, Ni, Zn, Cu, Cr, and Pb) are widely recognized as being hazardous to human health and environmentally deleterious. Therefore water hyacinth is used as a greener adsorption material. This study is a bibliometric analysis of research developments on the adsorption of lead (Pb) using water hyacinth (1995-2023). The data was retrieved from the Scopus database and analyzed using VOSviewer software to determine the relationship between keywords from each published document. The results of this research was divided into three parts: 1) publication output, 2) global research, and 3) keyword research. From the data obtained, it was found that there has been an increasing research trend of adsorption of lead using water hyacinth, although it is not significant and fluctuating. Overall, this study can be used by researchers to quantitatively assess trends and future directions of this research topic.

Evidence for the transportation of aggregated microplastics in the symplast pathway of oilseed rape roots and their impact on plant growth

As an emerging contaminant, microplastics are absorbed by crops, causing diverse impacts on plants. Plants may have different physiological responses to different uptake modes of microplastics various stage of growth. In this study, the distribution of polystyrene (PS) microspheres in the roots of oilseed rape and the physiological responses at different growth stages were investigated by confocal laser scanning microscope, scanning electron microscopy, and biochemical analysis. This study, conducted via scanning electron microscopy, discovered that agglomerates of microspheres, rather than individual plastic pellets, were taken up by plant roots in solution for the first time. The agglomerates subsequently migrate into the vascular bundles of the root system. Moreover, this study provided the proof for the first time that PS is transported in plants via the symplast system. On the physiological and biochemical function, the exposure of PS at the flowering and bolting stages caused oxidative stress on oilseed rape. That is, the addition of PS with different particle sizes significantly increased peroxidase (POD), malondialdehyde (MDA), photosynthetic rate, chlorophyll content and inhibited superoxide dismutase (SOD) content in oilseed rape at different developmental stages. These changes regulated the chloroplast structure and chlorophyll synthesis, maintained a high photosynthetic rate, and mitigated the toxicity of PS. In addition, correlation analysis showed that MDA and citric acid contents were significantly positively correlated with chlorophyll contents (p < 0.05), which suggested that the 80 nm PS treatment stimulated organic acid secretion in oilseed rape at the bolting stage to maintain a higher chlorophyll content. This study expands the current understanding of the effects of microplastics on crop growth, and the results holding significant implications for exploring the impact of microplastics on vegetables during various developmental stages and for future risk assessment.

Overcoming the fluorescent interference during Raman spectroscopy detection of microplastics

Owing to environmental concerns, microplastics pollution has been the object of increasing attention. Currently, the chemical composition of microplastics is commonly detected using Raman spectroscopy. Nevertheless, the Raman spectra of microplastics may be overlaid by signals derived from additives (e.g., pigment), resulting in serious interference. In this study, an efficient method is proposed to overcome the interference of fluorescence during Raman spectroscopic detection of microplastics. Four catalysts of Fenton's reagent (Fe2+, Fe3+, Fe3O4, and K2Fe4O7) have been investigated for their capacity to generate hydroxyl radical (•OH), thus potentially eliminating the fluorescent signals in microplastics. The results indicate that the Raman spectrum of microplastics treated with Fenton's reagent can be efficiently optimized in the absence of spectral processing. This method has been successfully applied to the detection of microplastics collected from mangroves, featuring a range of colours and shapes. Consequentially, after 14 h of treatment with sunlight-Fenton (Fe2+: 1 × 10-‍6 M, H2O2: 4 M), the Raman spectra matching-degree (RSMD) of all microplastics were >70.00 %. The innovative strategy discussed in this manuscript can greatly promote the application of Raman spectroscopy in the detection of real environmental microplastics, overcoming interfering signals derived from additives.

Super-tough polylactic acid (PLA)/poly(butylene succinate) (PBS) materials prepared through reactive blending with epoxy-functionalized PMMA-GMA copolymer

High-performance biosourced polylactic acid (PLA)/poly(butylene succinate) (PBS) blends with small amounts of compatibilizer, epoxy-functionalized methyl methacrylate-co-glycidyl methacrylate copolymer (PMMA-GMA), were fabricated by melt compounding. The properties of the modified PLA/PMMA-GMA, PBS/PMMA-GMA, and PLS(PLA/PBS)/PMMA-GMA blends were investigated systematically. DSC combined with X-ray diffraction revealed a low-order semi-crystalline structure for all samples. SEM and DMA showed that the compatibility between PLA and PBS was improved after addition of PMMA-GMA. Rheological behavior of blends showed that the addition of PMMA-GMA resulted in a significant improvement in the viscoelasticity. FT-IR spectra confirmed that the interfacial compatibilization between PLA and PBS phases was improved due to the reaction of epoxy groups with terminal groups of PLA and PBS. Finally, the toughness and notched impact strength of the PLA materials were increased significantly. The elongation at break and notched impact strength of PLS/PMMA-GMA was about 55.7 and 6.2 times than neat PLA after incorporation of 7 wt% PMMA-GMA, respectively.

Advanced bibliometric analysis on water, energy, food, and environmental nexus (WEFEN)

The relationship between water, energy, food, and the environment has piqued the interest of the global community due to the critical interdependence of these resources for long-term development. This article investigates research within the field of the quadruple nexus. Data from Scopus documents, with the keywords "water, energy, food, and environment" from 2011 to 2022, were processed and analyzed. Further research revealed that scientific exploration of the water-energy-food-environment relationship is rapidly expanding. The Scopus database was used to extract information about countries, institutions, highly cited publications, keywords, hot topics, and future research trends for this study. Additionally, the VOSviewer bibliometric software was employed to evaluate the scientific citations in this article. The results indicated that the USA, compared to other nations, publishes a larger quantity of articles in this field. Recently, China, India, and Middle Eastern countries have garnered significant attention and have been extensively researched. The Philippines, Finland, and Iran have also emerged among the top nations publishing recent articles on the water-energy-food-environment nexus (WEFEN). This article attempts to study the bibliography on the WEFEN connection, identify popular topics, and discern the fields of future studies in this discussion. Furthermore, it investigates the effects of economic and social factors as well as the impact of the COVID-19 pandemic on this quadruple nexus.

Marine plastic pollution in Morocco: state of the knowledge on origin, occurrence, fate, and management

Plastic pollution presents a major challenge facing stakeholders and decision-making worldwide. Plastics in the ocean damage biodiversity and marine ecosystem services that the blue economy relies upon. The present work analyses and reviews the literature on plastic pollution and the background knowledge about marine plastic pollution in Morocco. The economy of Morocco depends mainly on marine activities, including fisheries, tourism, and maritime trade. These sectors were identified as the main in-situ sources of plastics entering Moroccan coastal waters. The analysis results showed that the increasing abundance of plastics in such marine systems causes substantial economic loss to blue economy activities. In contrast, the lack of data on the plastic waste quantity entering Moroccan water is a limiting factor for assessing plastic pollution. This highlights the need for a risk assessment and more field investigations to value the weight impacts of marine activities generators of plastics on biodiversity and the economy. In addition, implementing laws and rules forbidding the disposal of plastic waste (PW) in public spaces, mainly beaches, and streets, is urgently needed. Raising awareness of plastic waste management and prioritizing improved waste collection, sorting, and management would boost Morocco's establishment and adoption of circular economy strategies. It is worth noting that while implementing the management projects and regulatory frameworks of plastic waste, considering their source and usage purpose is mandatory.

Microplastics in water: types, detection, and removal strategies

Microplastics are one of the most concerning groups of contaminants that pollute most of the surroundings of the Earth. The abundance of plastic materials available in the environment moved the scientific community in defining a new historical era known as Plasticene. Regardless of their minuscule size, microplastics have posed severe threats to the life forms like animals, plants, and other species present in the ecosystem. Ingestion of microplastics could lead to harmful health effects like teratogenic and mutagenic abnormalities. The source of microplastics could be either primary or secondary in which the components of microplastics are directly released into the atmosphere and the breakdown of larger units to generate the smaller molecules. Though numerous physical and chemical techniques are reported for the removal of microplastics, their increased cost prevents the large-scale applicability of the process. Coagulation, flocculation, sedimentation, and ultrafiltration are some of the methods used for the removal of microplastics. Certain species of microalgae are known to remove microplastics by their inherent nature. One of the biological treatment strategies for microplastic removal is the activated sludge strategy that is used for the separation of microplastic. The overall microplastic removal efficiency is significantly high compared to conventional techniques. Thus, the reported biological avenues like the bio-flocculant for microplastic removal are discussed in this review article.

Statistical optimization of P(3HB-co-3HHx) copolymers production by Cupriavidus necator PHB-4/pBBR_CnPro-phaCRp and its properties characterization

Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)] is a bacterial copolymer in the polyhydroxyalkanoates (PHAs) family, a next-generation bioplastic. Our research team recently engineered a newly P(3HB-co-3HHx)-producing bacterial strain, Cupriavidus necator PHB^-4/pBBR_CnPro-phaC_Rp. This strain can produce P(3HB-co-2 mol% 3HHx) using crude palm kernel oil (CPKO) as a sole carbon substrate. However, the improvement of P(3HB-co-3HHx) copolymer production by this strain has not been studied so far. Thus, this study aims to enhance the production of P(3HB-co-3HHx) copolymers containing higher 3HHx monomer compositions using response surface methodology (RSM). Three significant factors for P(3HB-co-3HHx) copolymers production, i.e., CPKO concentration, sodium hexanoate concentration, and cultivation time, were studied in the flask scale. As a result, a maximum of 3.6 ± 0.4 g/L of P(3HB-co-3HHx) with 4 mol% 3HHx compositions was obtained using the RSM optimized condition. Likewise, the higher 3HHx monomer composition (5 mol%) was obtained when scaling up the fermentation in a 10L-stirrer bioreactor. Furthermore, the produced polymer's properties were similar to marketable P(3HB-co-3HHx), making this polymer suitable for a wide range of applications.

Global plastic upcycling during and after the COVID-19 pandemic: The status and perspective

Plastic pollution has become one of the most pressing environmental issues worldwide since the vast majority of post-consumer plastics are hard to degrade in the environment. The coronavirus disease (COVID-19) pandemic had disrupted the previous effort of plastic pollution mitigation to a great extent due to the overflow of plastic-based medical waste. In the post-pandemic era, the remaining challenge is how to motivate global action towards a plastic circular economy. The need for one package of sustainable and systematic plastic upcycling approaches has never been greater to address such a challenge. In this review, we summarized the threat of plastic pollution during COVID-19 to public health and ecosystem. In order to solve the aforementioned challenges, we present a shifting concept, regeneration value from plastic waste, that provides four promising pathways to achieve a sustainable circular economy: 1) Increasing reusability and biodegradability of plastics; 2) Transforming plastic waste into high-value products by chemical approaches; 3) The closed-loop recycling can be promoted by biodegradation; 4) Involving renewable energy into plastic upcycling. Additionally, the joint efforts from different social perspectives are also encouraged to create the necessary economic and environmental impetus for a circular economy.

Consumer Awareness of Plastic: an Overview of Different Research Areas

Plastic makes our society more practical and safer. It is hard to consider eliminating plastic in some sectors, such as the medical field. However, after use, plastic waste becomes a global problem without precedents, and when not properly disposed of, it can cause several socio-environmental problems. Some possible solutions are recycling, the circular economy, proper waste management, and consumer awareness. Consumers play a crucial role in preventing problems caused by plastic. In this work, consumer awareness of plastic is discussed according to the point of view of the research areas-environmental science, engineering, and materials science-based on the analysis of the main authors' keywords obtained in a literature search in the Scopus database. Bibliometrix analyzed the Scopus search results. The results showed that each area presents different concerns and priorities. The current scenario, including the main hotspots, trends, emerging topics, and deficiencies, was obtained. On the contrary, the concerns from the literature and those of the daily lives of consumers do not seem to fit in, which creates a gap. By reducing this gap, the distance between consumers awareness and their behavior will be smaller.

Call for biotechnological approach to degrade plastic in the era of COVID-19 pandemic

Plastic pollution is a global issue and has become a major concern since Coronavirus disease (COVID)-19. In developing nations, landfilling and illegal waste disposal are typical ways to dispose of COVID-19-infected material. These technologies worsen plastic pollution and other human and animal health problems. Plastic degrades in light and heat, generating hazardous primary and secondary micro-plastic. Certain bacteria can degrade artificial polymers using genes, enzymes, and metabolic pathways. Microorganisms including bacteria degrade petrochemical plastics slowly. High molecular weight, strong chemical bonds, and excessive hydrophobicity reduce plastic biodegradation. There is not enough study on genes, enzymes, and bacteria-plastic interactions. Synthetic biology, metabolic engineering, and bioinformatics methods have been created to biodegrade synthetic polymers. This review will focus on how microorganisms' degrading capacity can be increased using recent biotechnological techniques.

The Role of Bacterial Polyhydroalkanoate (PHA) in a Sustainable Future: A Review on the Biological Diversity

Environmental challenges related to the mismanagement of plastic waste became even more evident during the COVID-19 pandemic. The need for new solutions regarding the use of plastics came to the forefront again. Polyhydroxyalkanoates (PHA) have demonstrated their ability to replace conventional plastics, especially in packaging. Its biodegradability and biocompatibility makes this material a sustainable solution. The cost of PHA production and some weak physical properties compared to synthetic polymers remain as the main barriers to its implementation in the industry. The scientific community has been trying to solve these disadvantages associated with PHA. This review seeks to frame the role of PHA and bioplastics as substitutes for conventional plastics for a more sustainable future. It is focused on the bacterial production of PHA, highlighting the current limitations of the production process and, consequently, its implementation in the industry, as well as reviewing the alternatives to turn the production of bioplastics into a sustainable and circular economy.

Plastic wastes in the time of COVID-19: Their environmental hazards and implications for sustainable energy resilience and circular bio-economies

The global scope of pollution from plastic waste is a well-known phenomenon associated with trade, mass consumption, and disposal of plastic products (e.g., personal protective equipment (PPE), viral test kits, and vacuum-packaged food). Recently, the scale of the problem has been exacerbated by increases in indoor livelihood activities during lockdowns imposed in response to the coronavirus disease 2019 (COVID-19) pandemic. The present study describes the effects of increased plastic waste on environmental footprint and human health. Further, the technological/regulatory options and life cycle assessment (LCA) approach for sustainable plastic waste management are critically dealt in terms of their implications on energy resilience and circular economy. The abrupt increase in health-care waste during pandemic has been worsening environmental quality to undermine the sustainability in general. In addition, weathered plastic particles from PPE along with microplastics (MPs) and nanoplastics (NPs) can all adsorb chemical and microbial contaminants to pose a risk to ecosystems, biota, occupational safety, and human health. PPE-derived plastic pollution during the pandemic also jeopardizes sustainable development goals, energy resilience, and climate control measures. However, it is revealed that the pandemic can be regarded as an opportunity for explicit LCA to better address the problems associated with environmental footprints of plastic waste and to focus on sustainable management technologies such as circular bio-economies, biorefineries, and thermal gasification. Future researches in the energy-efficient clean technologies and circular bio-economies (or biorefineries) in concert with a "nexus" framework are expected to help reduce plastic waste into desirable directions.