Enhanced adsorption performance of UiO-66 via modification with functional groups and integration into hydrogels

Dual-network sodium alginate-chitosan aerogel loaded with UiO-66 for efficient removal of organic pollutants in water: Preparation and mechanism study

Organic pollutants in wastewater pose severe threats to human health and ecosystems. This study used maleic anhydride to adjust chitosan's (CA) surface charge, enhancing solubility and forming a homogenous solution with sodium alginate (SA). Glutaraldehyde cross-linking created a water-stable double network sodium alginate/chitosan composite aerogel (SCCA). UiO-66 was in-situ loaded to produce UiO-66@SCCA, a high-specific-surface-area biopolymer for removing pollutants like ibuprofen (IBP) and methyl orange (MO). UiO-66@SCCA had a surface area of 302.65 m2/g and a UiO-66 loading rate of 48.77 %. Factors affecting adsorption efficiency (time, pH, adsorbent, coexisting ions) were studied. Adsorption followed pseudo-second-order kinetics and Langmuir isotherms, with maximum capacities of 67.39 mg/g for IBP and 45.22 mg/g for MO. Efficiency all remained above 90 % after five cycles. Mechanisms included hydrogen bonding, pore filling, electrostatic interactions, and Electron Donor - Acceptor (EDA) interactions. UiO-66@SCCA shows significant potential for pollutant removal.

Nanozyme-based colorimetric and smartphone imaging advanced sensing platforms for tetracycline detection and removal in food

The presence of antibiotic residues poses a significant threat to food assurance, triggering widespread concerns. Therefore, the prompt and accurate detection and removal of antibiotic residues are essential for ensuring food safety. In this study, an aptmer modified triple-metal nanozyme (apt-TMNzyme) sensor was developed, which achieved a portable, visual, intelligent, and fast determination for tetracycline (TET). The proposed apt-TMNzyme exhibited willow leaf-like morphology, high specific surface area and excellent TET adsorption and removal properties. The experiments showed that the apt-TMNzyme had outstanding peroxidase activity and could catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to produce a blue product in the presence of H2O2, which provided a visual response signal to TET. This sensor was capable of quantifying TET within a concentration range of 0.2 nM-70 μM, achieving a detection limit of 7.1 nM under optimal conditions. When tested on real food samples, our sensor produced results that closely paralleled those achieved through high-performance liquid chromatography. To improve accessibility and user-friendliness, we also designed a colorimetric testing paper integrated with a smartphone application for intuitive and intelligent detection of TET, which enables the quantitative determination of TET in the concentration range of 0.003-60 μM, the detection limit was 5.1 μM. This integrated portable sensor not only streamlines the testing process, saving time and costs, but also offers a promising solution for rapid and sensitive detection of antibiotic residues.

Coupling UiO-66 MOF with a Nanotubular Oxide Layer Grown on Ti-W Alloy Accelerates the Degradation of Hormones in Real Water Matrices

To enable the photoelectrocatalytic treatment of large volumes of water containing low concentrations of pollutants, this study introduces a hybrid photocatalyst, composed of nanotubular oxides grown on TixW alloy (x = 0.5 and 5.0 wt %) modified with UiO-66 MOF, for degradation of estrone (E1) and 17α-ethinyl estradiol (EE2). The oxide layer (Nt/TixW) was prepared via anodization, while UiO-66 nanoparticles were synthesized by using a solvothermal process. Different techniques for modifying nanotubular oxides were evaluated to maximize the photocatalytic activity and the sorption process. In photo(electro)catalytic experiments using low concentrations of E1 and EE2 synthetic solutions and UV-vis radiation (100 W/cm2), all modified materials exhibited approximately 40% higher degradation compared to the unmodified photocatalyst, keeping the same sequential performance of the photocatalysts (Nt/TiO2 < Nt/Ti-0.5W < Nt/Ti-5.0W) independent of the treatment. This enhancement was attributed to the MOF's increased hormone sorption, with no synergistic interaction observed between the photocatalyst and the adsorbent. In real water supply matrices, the photoelectrocatalytic removal rate of E1 using Nt/Ti-5.0W modified UiO-66 under UV-vis radiation and 1.3 V was 0.168 s-1, while for EE2, it was 0.310 min-1, approximately 1.78 and 18.21 times faster than obtained with the unmodified photocatalyst. The slower degradation rate of EE2 compared to that of E1 is attributed to the formation of denser intermediates that compete with smaller organic molecules in the real matrix. The cooperative effect between NT/TixW and UiO-66 favored the confinement of pollutants and by-products within the UiO-66 cavity, minimizing the diffusion effects and promoting the degradation of these compounds by the OH· radical generated at the oxide/solution interface. Among the tested electrodes, NT/Ti5W modified with UiO-66 demonstrated the highest efficiency and stability during the recycle tests. This highlights its promise for applications in photocatalytic processes for treating water supplies with low pollutant concentrations.

Preparation of pyrolytic coke/uio-66 composite and its effectiveness for removing mono-ethylene glycol (MEG) from aqueous environments

In the present study, the potential of pyrolytic coke (PC) and PC modified with UiO-66 nanoparticles as adsorbents for removing mono-ethylene glycol (MEG) from aqueous solutions was studied. Different experimental techniques were used to investigate the properties of adsorbents. The modification of the PC surface (6.91 m2/g) with UiO-66 significantly enhanced the specific surface area of the PC/UiO-66 composites, increasing it to 379.31 m2/g. Maximum MEG adsorption using PC (84.21%) and PC/UiO-66 (96.75%) was recorded at pH equal to 5 and 7, MEG quantity of 100 mg/L, temperature of 25 °C, adsorbent dosage of 1 g/L, and treatment time of 120 min, respectively. The Langmuir isotherm adsorption capacities for MEG removal using PC and PC/UiO-66 were determined to be 265 mg/g and 291 mg/g, respectively. The KF and AT values for the MEG adsorption were obtained at 128.1 mg/g (L/mg)1/n and 11.05 L/g, indicating the more pronounced affinity of the PC/UiO-66 towards MEG than the PC sample. The enthalpy, entropy, and Gibbs free energy were determined to be negative; thus, the MEG adsorption was exothermic and spontaneous in the range of 25-50 °C. The results demonstrated that the experimental data adheres to a pseudo-first-order kinetic. The adsorbents were recycled up to five stages, and the results showed that after five cycles, no significant decrease in the adsorption efficiency occurred, making them suitable for repeated utilization in the adsorption process.

Organic and Metal-Organic Polymer-Based Catalysts-Enfant Terrible Companions or Good Assistants?

This overview provides insights into organic and metal-organic polymer (OMOP) catalysts aimed at processes carried out in the liquid phase. Various types of polymers are discussed, including vinyl (various functional poly(styrene-co-divinylbenzene) and perfluorinated functionalized hydrocarbons, e.g., Nafion), condensation (polyesters, -amides, -anilines, -imides), and additional (polyurethanes, and polyureas, polybenzimidazoles, polyporphyrins), prepared from organometal monomers. Covalent organic frameworks (COFs), metal-organic frameworks (MOFs), and their composites represent a significant class of OMOP catalysts. Following this, the preparation, characterization, and application of dispersed metal catalysts are discussed. Key catalytic processes such as alkylation-used in large-scale applications like the production of alkyl-tert-butyl ether and bisphenol A-as well as reduction, oxidation, and other reactions, are highlighted. The versatile properties of COFs and MOFs, including well-defined nanometer-scale pores, large surface areas, and excellent chemisorption capabilities, make them highly promising for chemical, electrochemical, and photocatalytic applications. Particular emphasis is placed on their potential for CO2 treatment. However, a notable drawback of COF- and MOF-based catalysts is their relatively low stability in both alkaline and acidic environments, as well as their high cost. A special part is devoted to deactivation and the disposal of the used/deactivated catalysts, emphasizing the importance of separating heavy metals from catalysts. The conclusion provides guidance on selecting and developing OMOP-based catalysts.

Separable Metal-Organic Framework-Based Materials for the Adsorption of Emerging Contaminants

Thousands of chemicals have been released into the environment in recent decades. The presence of emerging contaminants (ECs) in water has emerged as a pressing concern. Adsorption is a viable solution for the removal of ECs. Metal-organic frameworks (MOFs) have shown great potential as efficient adsorbents, but their dispersed powder form limits their practical applications. Recently, researchers have developed various separable MOF-based adsorbents to improve their recyclability. The purpose of this review is to summarize the latest developments in the construction of separable MOF-based adsorbents and their applications in adsorbing ECs. The construction strategies for separable MOFs are classified into four categories: magnetic MOFs, MOF-fiber composites, MOF gels, and binder-assisted shaping. Typical emerging contaminants include pesticides, pharmaceuticals and personal care products, and endocrine-disrupting compounds. The adsorption performance of different materials is evaluated based on the results of static and dynamic adsorption experiments. Additionally, the regeneration methods of MOF-based adsorbents are discussed in detail to facilitate effective recycling and reuse. Finally, challenges and potential future research opportunities are proposed, including reducing performance losses during the shaping process, developing assessment systems based on dynamic purification and real polluted water, optimizing regeneration methods, designing multifunctional MOFs, and low-cost, large-scale synthesis of MOFs.

Recent advancements in modifications of metal-organic frameworks-based materials for enhanced water purification and contaminant detection

Metal-organic frameworks (MOFs) have emerged as a key focus in water treatment and monitoring due to their unique structural features, including extensive surface area, customizable porosity, reversible adsorption, and high catalytic efficiency. While numerous reviews have discussed MOFs in environmental remediation, this review specifically addresses recent advancements in modifying MOFs to enhance their effectiveness in water purification and monitoring. It underscores their roles as adsorbents, photocatalysts, and in luminescent and electrochemical sensing. Advancements such as pore modification, defect engineering, and functionalization, combined synergistically with advanced materials, have led to the development of recyclable MOF-based nano-adsorbents, Z-scheme photocatalytic systems, nanocomposites, and hybrid materials. These innovations have broadened the spectrum of removable contaminants and improved material recyclability. Additionally, this review delves into the creation of multifunctional MOF materials, the development of robust MOF variants, and the simplification of synthesis methods, marking significant progress in MOF sensor technology. Furthermore, the review addresses current challenges in this field and proposes potential future research directions and practical applications. The growing research interest in MOFs underscores the need for an updated synthesis of knowledge in this area, focusing on both current challenges and future opportunities in water remediation.

UiO-66 nanoparticles combat influenza A virus in mice by activating the RIG-I-like receptor signaling pathway

The Influenza A virus (IAV) is a zoonotic pathogen that infects humans and various animal species. Infection with IAV can cause fever, anorexia, and dyspnea and is often accompanied by pneumonia characterized by an excessive release of cytokines (i.e., cytokine storm). Nanodrug delivery systems and nanoparticles are a novel approach to address IAV infections. Herein, UiO-66 nanoparticles (NPs) are synthesized using a high-temperature melting reaction. The in vitro and in vivo optimal concentrations of UiO-66 NPs for antiviral activity are 200 μg mL-1 and 60 mg kg-1, respectively. Transcriptome analysis revealed that UiO-66 NPs can activate the RIG-I-like receptor signaling pathway, thereby enhancing the downstream type I interferon antiviral effect. These NPs suppress inflammation-related pathways, including the FOXO, HIF, and AMPK signaling pathways. The inhibitory effect of UiO-66 NPs on the adsorption and entry of IAV into A549 cells is significant. This study presents novel findings that demonstrate the effective inhibition of IAV adsorption and entry into cells via UiO-66 NPs and highlights their ability to activate the cellular RIG-I-like receptor signaling pathway, thereby exerting an anti-IAV effect in vitro or in mice. These results provide valuable insights into the mechanism of action of UiO-66 NPs against IAV and substantial data for advancing innovative antiviral nanomedicine.

Metal-organic gels: recent advances in their classification, characterization, and application in the pharmaceutical field

Metal-organic gels (MOGs) are a type of functional soft substance with a three-dimensional (3D) network structure and solid-like rheological behavior, which are constructed by metal ions and bridging ligands formed under the driving force of coordination interactions or other non-covalent interactions. As the homologous substances of metal-organic frameworks (MOFs) and gels, they exhibit the potential advantages of high porosity, flexible structure, and adjustable mechanical properties, causing them to attract extensive research interest in the pharmaceutical field. For instance, MOGs are often used as excellent vehicles for intelligent drug delivery and programmable drug release to improve the clinical curative effect with reduced side effects. Also, MOGs are often applied as advanced biomedical materials for the repair and treatment of pathological tissue and sensitive detection of drugs or other molecules. However, despite the vigorous research on MOGs in recent years, there is no systematic summary of their applications in the pharmaceutical field to date. The present review systematically summarize the recent research progress on MOGs in the pharmaceutical field, including drug delivery systems, drug detection, pharmaceutical materials, and disease therapies. In addition, the formation principles and classification of MOGs are complemented and refined, and the techniques for the characterization of the structures/properties of MOGs are overviewed in this review.

Fabricating Materials of Institute Lavoisier-53(Fe)/zeolite imidazolate framework-8 hybrid materials as high-efficiency and reproducible adsorbents for removing organic pollutants

Environmental pollution by emerging contaminants has become an urgent problem. Herein, novel binary metal-organic framework hybrids were constructed from Materials of Institute Lavoisier-53(Fe) (MIL-53(Fe)) and zeolite imidazolate framework-8 (ZIF-8) for the first time. A battery of characterizations were employed to determine the MIL/ZIF hybrids' properties and morphology. Furthermore, the MIL/ZIF towards toxic antibiotics (tetracycline, ciprofloxacin and ofloxacin) were studied to explore their adsorption abilities. The present work disclosed that the obtained MIL-53(Fe)/ZIF-8 = 2:3 possessed an eminent specific surface area with an admirable removal efficiency of tetracycline (97.4%), ciprofloxacin (97.1%) and ofloxacin (92.4%), respectively. The tetracycline adsorption process conformed to the pseudo-second-order kinetic model and this process was more compatible with the Langmuir isotherm model with the highest adsorption capacity of 215.0 mg g^-1. Moreover, the process of removing tetracycline was proved to be spontaneous and exothermic by the thermodynamic results. Furthermore, the MIL-53(Fe)/ZIF-8 = 2:3 towards tetracycline exhibited significant regeneration ability. The effects of pH, dosage, interfering ions and oscillation frequency on tetracycline adsorption capacity and removal efficiency were also investigated. The primary factors contributing to the decent adsorption ability between MIL-53(Fe)/ZIF-8 = 2:3 and tetracycline included electrostatic, π-π stacking, hydrogen bonding and weak coordination interactions. Additionally, we also investigated the adsorption ability in real wastewater. Thus, the proposed binary metal-organic framework hybrid materials can be deemed a promising adsorbent in wastewater purification.

Recent advances in adsorption of environmental pollutants using metal-organic frameworks-based hydrogels

Water pollution is increasing significantly owing to industrialization and population growth that lead to serious environmental and health issues. Therefore, the design and development of more effective wastewater treatment approaches are necessary due to a significant upsurge in demand for freshwater. More recently, metal-organic frameworks (MOFs) have attracted attention in environmental science owing to their tunable porosity, unique structure, flexibility, and various composition. Despite these attractive advantages, some drawbacks, including intrinsic fragility, unsatisfied processability, dust formation, and poor reusability, have greatly limited their applications. Therefore, MOFs are often designed as supported-based MOFs (e.g., MOFs-coated composites) or 3D structured composites, such as MOFs-based hydrogels. MOFs-based hydrogels are excellent candidates in the sorption process because of their appropriate adsorption capacity, porous structure, good mechanical properties, durability as well as biodegradable features. In this review, the removal of different pollutants (e.g., synthetic dyes, phosphates, heavy metals, antibiotics, and some organic compounds) from aqueous media has been studied by the adsorption process using MOFs-based hydrogels. The important advancements in the fabrication of MOFs-based hydrogels and their capacities in the adsorption of pollutants under experimental conditions have been discussed. Finally, problems and future perspectives on the adsorption process using MOFs-based hydrogels have been investigated.

Synthesis of mesoporous-structured MIL-68(Al)/MCM-41-NH2 for methyl orange adsorption: Optimization and Selectivity

Here, we report a novel amino-modified mesoporous-structured aluminum-based metal-organic framework adsorbent, MIL-68(Al)/MCM-41-NH₂, for dye sewage treatment. The introduction of molecular sieves overcomes the inherent defects of microporous MOFs in contaminant transfer and provides more active sites to enhance adsorption efficiency. Compared with using organic amino ligands directly, this strategy is ten times cheaper. The composite was well characterized and analyzed in terms of morphology, structure and chemical composition. Batch experiments were carried out to study the influences of essential factors on the process, such as pH and temperature. In addition, their interactions and the optimum conditions were examined using response surface methodology (RSM). The adsorption kinetics, isotherms and thermodynamics were systematically elucidated. In detail, the adsorption process conforms to pseudo-second-order kinetics and follows the Sips and Freundlich isothermal models. Moreover, the maximum adsorption capacity Q_s of methyl orange (MO) was 477 mg g^-1. It could be concluded that the process was spontaneous, exothermic, and entropy-reducing. Several binary dye systems have been designed for selective adsorption research. Our material has an affinity for anionic pigments. The adsorption mechanisms were discussed in depth. The electrostatic interaction might be the dominant effect. Meanwhile, hydrogen bonding, π-π stacking, and pore filling might be important driving forces. The excellent thermal stability and recyclability of the adsorbent are readily noticed. After five reuse cycles, the composite still possesses a removal efficiency of 90% for MO. Overall, the efficient and low-cost composite can be regarded as a promising adsorbent for the selective adsorption of anionic dyes from wastewater.

Hydroxyl-modified zirconia/porous carbon nanocomposite used as a highly efficient and renewable adsorbent for removal of carbamazepine from water

Metal-organic frameworks (MOFs) derived metal oxides/porous carbon nanocomposites were used as adsorbents to remove pollutants from wastewater. The adsorption performance of the metal oxides/porous carbon nanocomposites could be improved by introducing functional groups. In this study, hydroxyl-modified zirconia/porous carbon nanocomposite (C-UiO-66-OH) was prepared and tested, choosing carbamazepine as a typical pollutant. The results showed that the adsorption capacity (186.21 mg g^-1) of C-UiO-66-OH was 6.96 times to that of normal UiO-66. The Langmuir isotherm model and pseudo-first-order kinetic model was well fit the adsorption process. The thermodynamic parameters indicated that the adsorption process was spontaneous and endothermic. The adsorbent regeneration could be accomplished by washing C-UiO-66-OH with ethanol and DI water. The good adsorption/desorption performance comes from the synergistic effect of (EDA) interaction and hydrogen bond between C-UiO-66-OH and CBZ molecule. A membrane prepared by immobilizing C-UiO-66-OH into melamine foam (MF) with sodium alginate (SA) was also investigated for CBZ adsorption. The results indicated the excellent removal efficiency (86.0%) and good regeneration of the prepared membrane. Therefore, this paper provides an efficient and applicable way to remove CBZ from water.

Metal-Organic Frameworks and Their Composites for Environmental Applications

From the point of view of the ecological environment, contaminants such as heavy metal ions or toxic gases have caused harmful impacts on the environment and human health, and overcoming these adverse effects remains a serious and important task. Very recent, highly crystalline porous metal-organic frameworks (MOFs), with tailorable chemistry and excellent chemical stability, have shown promising properties in the field of removing various hazardous pollutants. This review concentrates on the recent progress of MOFs and MOF-based materials and their exploit in environmental applications, mainly including water treatment and gas storage and separation. Finally, challenges and trends of MOFs and MOF-based materials for future developments are discussed and explored.

Effective Removal of Tetracycline from Water Using Copper Alginate @ Graphene Oxide with In-Situ Grown MOF-525 Composite: Synthesis, Characterization and Adsorption Mechanisms

For nanomaterials, such as GO and MOF-525, aggregation is the main reason limiting their adsorption performance. In this research, Alg-Cu@GO@MOF-525 was successfully synthesized by in-situ growth of MOF-525 on Alg-Cu@GO. By dispersing graphene oxide (GO) with copper alginate (Alg-Cu) with three-dimensional structure, MOF-525 was in-situ grown to reduce aggregation. The measured specific surface area of Alg-Cu@GO@MOF-525 was as high as 807.30 m²·g^-1, which is very favorable for adsorption. The synthesized material has affinity for a variety of pollutants, and its adsorption performance is significantly enhanced. In particular, tetracycline (TC) was selected as the target pollutant to study the adsorption behavior. The strong acid environment inhibited the adsorption, and the removal percentage reached 96.6% when pH was neutral. Temperature promoted the adsorption process, and 318 K adsorption performance was the best under experimental conditions. Meanwhile, 54.6% of TC could be removed in 38 min, and the maximum adsorption capacity reached 533 mg·g^-1, far higher than that of conventional adsorption materials. Kinetics and isotherms analysis show that the adsorption process accords with Sips model and pseudo-second-order model. Thermodynamic study further shows that the chemisorption is spontaneous and exothermic. In addition, pore-filling, complexation, π-π stack, hydrogen bond and chemisorption are considered to be the causes of adsorption.