Lanthanum carbonate hydroxide/magnetite nanoparticles functionalized porous biochar for phosphate adsorption and recovery: Advanced capacity and mechanisms study

Control of phosphorus release from sediment by iron/aluminum co-modified zeolite: efficiency, mechanism, and response of microbial communities in sediment

The efficiency of iron/aluminum co-modified zeolite (FeAl-Z) covering and amendment for controlling the internal loading of phosphorus (P) from sediment to the overlying water (OW) and its controlling mechanism were explored. The response of the composition of sedimentary microbial communities in sediment and their function to the FeAl-Z capping and amendment was also examined. FeAl-Z showed good removal performance for phosphate in aqueous solution. The maximum phosphate adsorption quantity for FeAl-Z at pH 7 attained 11.2 mg P/g. The release of sediment endogenous phosphorus to OW can be successfully restrained by the FeAl-Z covering and amendment, and the suppression ability of FeAl-Z covering was stronger than that of FeAl-Z amendment. Under the capping or amendment condition, FeAl-Z can effectively inactivate the labile phosphorus measured by diffusion gradient in thin film (DGT-LP) in the overlying water and surface sediment. The added FeAl-Z transformed redox-sensitive phosphorus (BD-P) to metal oxide-bound phosphorus (NaOH-IP) and residual phosphorus (Res-P) in sediment, which increased the stability of inorganic phosphorus in the sediment. The passivation of soluble reactive phosphorus (SRP) and DGT-LP in the surface sediment by FeAl-Z significantly contributed to the inhibition of sediment endogenous phosphorus release to OW by the FeAl-Z capping, and the passivation of SRP, DGT-LP and mobile phosphorus in the surface sediment played a pivotal role in the control of sediment internal phosphorus release by the FeAl-Z amendment. The FeAl-Z amendment and capping did not increase the liberation risk of Fe from sediment, and the microorganisms in the sediments under the conditions of FeAl-Z amendment and covering still can perform good ecological functions. Results of this research demonstrate that FeAl-Z capping has high application potential in the control of phosphorus transfer from sediment to OW.

Mechanistic study of highly effective phosphate removal from aqueous solutions over a new lanthanum carbonate fabricated carbon nanotube film

The effective purification of phosphate-containing wastewater is considered as increasingly important. In this study, a highly effective LC-CNT film was developed for efficient phosphate removal. Kinetic results showed that the adsorbent exhibited an improved mass transfer efficiency and a fast adsorption rate during adsorption (reaching 80% and 100% equilibrium adsorption capacity within 175 and 270 min, respectively). Kinetic model analysis suggested that the adsorption was a combined chemical physical process. Isotherm study revealed that the LC-CNT film showed a superior adsorption capacity (178.6 mg/g, estimated from the Langmuir model) with multiple adsorption mechanisms. pH study suggested that surface complexation and ligand exchange played important roles during adsorption, and the adsorbent worked well within the pH range of 3-7 with little La leakage. The ionic strength and competing anions showed little influence on the adsorbent effectiveness except for the carbonate and sulfate ions. The characterization and mechanism study revealed that the phosphate adsorption of the LC-CNT film was controlled by inner-sphere complexation, outer-sphere complexation and surface precipitation. The LC-CNT film also showed excellent regenerability and stability in cycling runs, further demonstrating its potential in industrial applications.

Nano La(OH)3 modified lotus seedpod biochar: A novel solution for effective phosphorus removal from wastewater

Effective removal of phosphorus from water is crucial for controlling eutrophication. Meanwhile, the post-disposal of wetland plants is also an urgent problem that needs to be solved. In this study, seedpods of the common wetland plant lotus were used as a new raw material to prepare biochar, which were further modified by loading nano La(OH)3 particles (LBC-La). The adsorption performance of the modified biochar for phosphate was evaluated through batch adsorption and column adsorption experiments. Adsorption performance of lotus seedpod biochar was significantly improved by La(OH)3 modification, with adsorption equilibrium time shortened from 24 to 4 h and a theoretical maximum adsorption capacity increased from 19.43 to 52.23 mg/g. Moreover, LBC-La maintained a removal rate above 99% for phosphate solutions with concentrations below 20 mg/L. The LBC-La exhibited strong anti-interference ability in pH (3-9) and coexisting ion experiments, with the removal ratio remaining above 99%. The characterization analysis indicated that the main mechanism is the formation of monodentate or bidentate lanthanum phosphate complexes through inner sphere complexation. Electrostatic adsorption and ligand exchange are also the mechanisms of LBC-La adsorption of phosphate. In the dynamic adsorption experiment of simulated wastewater treatment plant effluent, the breakthrough point of the adsorption column was 1620 min, reaching exhaustion point at 6480 min, with a theoretical phosphorus saturation adsorption capacity of 6050 mg/kg. The process was well described by the Thomas and Yoon-Nelson models, which indicated that this is a surface adsorption process, without the internal participation of the adsorbent.

Structural design of La2(CO3)3 loaded magnetic biochar for selective removal of phosphorus from wastewater

High levels of phosphorus released into the environment can cause eutrophication issues in wastewater, therefore discharge concentrations of such element are regulated in many countries. This study addresses the pressing need for effective phosphorus removal methods by developing a novel La2(CO3)3 and MnFe2O4 loaded biochar composite (LMB). A remarkable adsorption capacity towards the three forms of phosphorus from wastewater, including phosphate, phosphite, and etidronic acid monohydrate (as a representative of organic phosphorus), was exhibited by LMB (88.20, 16.35, and 15.95 mg g-1, respectively). The high saturation magnetization value (50.17 emu g-1) highlighted the easy separability and recyclability of the adsorbent. The adsorption process was well described by the Langmuir isotherm model and the pseudo-second-order kinetic model, which mainly involved chemisorption. Characterization results confirm the effective loading of La2(CO3)3 with ligand exchange and electrostatic attraction identified as the primary mechanisms. Importantly, the LMB demonstrated exceptional selectivity for phosphorus in wastewater samples containing various substances, exhibiting minimal interference from competing ions (Cl-, NO3-, SO42-, and CO32-). These findings enhance the understanding of LMB's application in efficient wastewater phosphorus removal. Holding significant promise in wastewater remediation, the LMB acts as an effective adsorbent, contributing substantially to the prevention and control of various types of phosphorus pollutants, thereby mitigating wastewater eutrophication.

Turning waste avocado stones and montmorillonite into magnetite-supported nanocomposites for the depollution of methylene blue: adsorbent reusability and performance optimization

The existence of methylene blue (MB) in wastewater even as traces is raising environmental concerns. In this regard, the performances of four adsorbents, avocado stone biochar (AVS-BC), montmorillonite (MMT), and their magnetite Fe3O4-derived counterparts, were compared. Results showed the superior performance of Fe3O4@AVS-BC and Fe3O4@MMT nanocomposites with removal percentages (%R) of 95.59% and 88%. The morphological features of AVS-BC as revealed by SEM analysis showed a highly porous surface compared to a plane and smooth surface in the case of MMT. Surface analysis using FT-IR and Raman spectroscopies corroborated the existence of the Fe-O peaks upon loading with magnetite. The XRD analysis confirmed the formation of cubic magnetite nanoparticles. The adsorption process in the batch mode was optimized using central composite design (CCD). Equilibrium and kinetic isotherms showed that the adsorption of MB onto Fe3O4@AVS-BC fitted well with the Langmuir isotherm and the pseudo-second-order (PSO) model. The maximum adsorption capacity (qm) was 118.9 mg/g (Fe3O4@AVS-BC) and 72.39 mg/g (Fe3O4@MMT). The Fe3O4@AVS-BC showed a higher selectivity toward MB compared to other organic contaminants. The MB-laden adsorbent was successfully used for the remediation of Cr (III), Ni (II), and Cd (II) with removal efficiencies hitting 100% following thermal activation.

Magnetic biochar with Mg/La modification for highly effective phosphate adsorption and its potential application as an algaecide and fertilizer

In this study, a highly efficient phosphate adsorbent (MBC/Mg-La) based on magnetic biochar was successfully synthesized through Mg-La modification. The phosphate adsorption capacity of biochar was significantly enhanced after Mg-La modification. The adsorbent exhibited an excellent phosphate adsorption performance, particularly for treating low-concentration phosphate wastewater. Within a wide pH range, the adsorbent maintained a stable phosphate adsorption capacity. Furthermore, it showed a high adsorption selectivity for phosphate. Therefore, given the excellent phosphate adsorption performance, the adsorbent could effectively inhibit algae growth by removing phosphate from water. Furthermore, the adsorbent after phosphate adsorption can be easily recycled through magnetic separation, which can serve as a phosphorus fertilizer to promote the growth of Lolium perenne L.

A critical review on the development of lanthanum-engineered biochar for environmental applications

Biochar and lanthanum (La) have been widely used in environment. However, there is a lack of knowledge and perspective on the development of La-engineered biochar (LEB) for environmental applications. This review shows that LEBs with a variety of La species via pre-/post-doping routes are developed for environmental applications. Specifically, precipitation, gelation, and calcination are the common sub-processes involved in the pre-/post-doping of La on the resultant LEB. The dominant La species for LEBs is La(OH)₃, which is formed through precipitation of La ions with various bases. Various La carbonates, e.g., LaOHCO₃, La₂(CO₃)₃, La₂CO₅, and NaLa(CO₃)₂, are also involved in the preparation of LEBs. The LEBs are high-efficient in the adsorption of phosphate, arsenic, antimonate and fluoride ions, attributed to the strong affinity of La to oxyanions and Lewis hard base. Lanthanum is also favorable for co-doping with transition metal species to further enhance the performances in adsorption or catalysis. This review also analyzes the prospects and future challenges for the preparation and application of LEBs in environment. Finally, this review is beneficial to inspire new breakthroughs on the preparation and environmental application of LEBs.

One-pot synthesis of novel flower-like LaCO3OH adsorbents for efficient scavenging of phosphate from wastewater

Phosphorus removal from wastewater has been considered as an effective method to control eutrophication and mitigate phosphorus deficiency. Phosphate adsorption using lanthanum-based materials has awakened much attention and triggered extensive research. In this study, novel flower-like LaCO₃OH materials were synthesized via a one-step hydrothermal method and evaluated for phosphate removal from wastewater. The adsorbent with flower-like structures prepared at the hydrothermal reaction time of 4.5 h (BLC-4.5) exhibited the optimum adsorption performance. BLC-4.5 had a rapid removal rate with more than 80% of the saturated adsorbed phosphate removed within 20 min. Furthermore, the maximum phosphate adsorption capacity of BLC-4.5 was as high as 228.5 mg/g. Notably, the La leaching amount of BLC-4.5 was negligible in the pH range of 3.0-11.0. BLC-4.5 outperformed most of the reported La-based adsorbents in terms of removal rate, adsorption capacity, and La leaching amount. Moreover, BLC-4.5 had broad pH adaptability (3.0-11.0) and high selectivity for phosphate. BLC-4.5 also displayed excellent phosphate removal efficiency in actual wastewater and great recyclability. The potential adsorption mechanisms of phosphate on BLC-4.5 were precipitation, electrostatic attraction, and inner-sphere complexation via ligand exchange. This study demonstrates that the newly developed flower-like BLC-4.5 reported here is a promising adsorbent for the effective treatment of phosphate in wastewater.

Highly-efficient molten NaOH-KOH for organochlorine destruction: Performance and mechanism

Molten salt has been increasingly acknowledged to be useful in the destruction of chlorine-containing organic wastes (COWs), e.g., organochlorine. However, the operational temperatures are usually high, and local structure and thermodynamic property of the molten salt remain largely unclear. In this study, novel molten NaOH-KOH is developed for organochlorine destruction, and its eutectic point can be lowered to 453 K with 1:1 mol ratio of NaOH to KOH. Further experiment shows that this molten NaOH-KOH is highly-efficient towards the destructions of both trichlorobenzene and dichlorophenol, acquiring the final dechlorination efficiencies as 88.2% and 94.1%, respectively. The organochlorine destruction and chloride salt enrichment are verified by fourier-transform infrared spectrometer. Molten NaOH-KOH not only eliminates the C-Cl and CC bonds, but also traps generated CO₂, other acidic gases, and possibly particulate matters as a result of the high surface area and high viscosity. This makes it possibly advantageous over incineration for organic waste destruction for carbon neutrality. To sufficiently reveal the inherent mechanism for the temperature dependent performance, molecular dynamics simulation is further adopted. Results show that the radial distance between ions increases with temperature, causing larger molar volume and lower resistance to shear deformation. Moreover, thermal expansion coefficient, specific heat capacity, and ion self-diffusion coefficient of the molten NaOH-KOH are found to increase linearly with temperature. All these microscopic alterations contribute to the organochlorine destruction. This study benefits to develop highly-efficient molten system for COWs treatment via a low-carbon approach.

Phosphate Removal Mechanisms in Aqueous Solutions by Three Different Fe-Modified Biochars

Iron-modified biochar can be used as an environmentally friendly adsorbent to remove the phosphate in wastewater because of its low cost. In this study, Fe-containing materials, such as zero-valent iron (ZVI), goethite, and magnetite, were successfully loaded on biochar. The phosphate adsorption mechanisms of the three Fe-modified biochars were studied and compared. Different characterization methods, including scanning electron microscopy/energy-dispersive spectrometry (SEM-EDS), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS), were used to study the physicochemical properties of the biochars. The dosage, adsorption time, pH, ionic strength, solution concentration of phosphate, and regeneration evaluations were carried out. Among the three Fe-modified biochars, biochar modified by goethite (GBC) is more suitable for phosphate removal in acidic conditions, especially when the pH = 2, while biochar modified by ZVI (ZBC) exhibits the fastest adsorption rate. The maximum phosphate adsorption capacities, calculated by the Langmuir-Freundlich isothermal model, are 19.66 mg g^-1, 12.33 mg g^-1, and 2.88 mg g^-1 for ZBC, GBC, and CSBC (biochar modified by magnetite), respectively. However, ZBC has a poor capacity for reuse. The dominant mechanism for ZBC is surface precipitation, while for GBC and CSBC, the major mechanisms are ligand exchange and electrostatic attraction. The results of our study can enhance the understanding of phosphate removal mechanisms by Fe-modified biochar and can contribute to the application of Fe-modified biochar for phosphate removal in water.