Microplastics contamination in groundwater of a drinking-water source area, northern China

Microplastics in groundwater: Environmental fate and possible interactions with coexisting contaminants

Microplastics (MPs) are emerging environmental pollutants which represent a serious threat to ecosystems and human health and have received significant attention from the global community. Currently, a growing number of studies have found the presence of MPs in groundwater. This study exhaustively reviewed varying degrees of recent publications in Web of Science database and investigated the characteristics of MPs (concentration, types, sizes and shapes) in groundwater ecosystems, their migration characteristics, and interactions with co-occurring contaminants. Results suggested that current global research on MPs in groundwater has primarily focused on countries such as India, South Korea, China, Italy and United States. Pollution levels of MPs in groundwater show significant variability, ranging from 0 to 6832 n/L. The predominant plastic polymer types include PP, PE, PS, PA, PET and PVC. The sources of MPs in groundwater are primarily classified as associated with natural processes and anthropogenic activities. The physical, chemical and biological properties can influence the migration of MPs into groundwater. Furthermore, MPs can act as carriers, interacting with co-occurring contaminants, thereby enhancing their migration and toxicity, potentially posing a threat to groundwater ecosystems and human health. Consequently, the major challenges and associated recommendations for forthcoming research on MPs in groundwater are proposed.

Occurrence, sources, and ecological risk of microplastics in groundwater: Impacts by agricultural activities and atmospheric deposition

Although microplastic (MP) pollution in groundwater is a serious issue, its potential sources and environmental risks are poorly understood. This study identified the sources of MPs in groundwater from a megacity in China. It estimated the environmental risks of MPs using a combination of the pollution load index (PLI), the polymer hazard index (PHI), and the potential ecological risk index (PERI). The groundwater in Shanghai showed high MP abundances, ranging from 3 ± 3 particles/L to 99 ± 19 particles/L. A total of 43 polymer types were detected, of which polypropylene (PP) and polyethylene (PE) were the main polymer types. Groundwater in agricultural areas has the highest level of MP pollution, with >50 % of MPs being identified as PP. Plastic woven bags used in agricultural activities were the primary sources. Similar characteristics of MPs in groundwater from open wells and atmospheric deposition samples suggested that atmospheric deposition was a significant source of MPs in groundwater from open wells. Landfills and construction activities were also recognized as potential MP pollution sources in groundwater. Based on PLI, PHI and PERI analysis, the groundwater in Shanghai exhibited a high MP pollution load, a middle polymer hazard, and a high potential ecological risk level, respectively. The PERI analysis, a comprehensive assessment compared to the PLI and PHI analyses, indicated an overall high ecological risk of MPs in agricultural groundwater. This study advances the knowledge of MP sources and their ecological risks in groundwater, allowing for better MP pollution control in areas with high MP abundance and high risk levels.

Microplastic pollution of thermal waters in Kütahya, Turkey

Microplastics (MPs) are emerging pollutants in aquatic systems, but their presence in groundwater, particularly thermal waters, is understudied. This study investigates the prevalence and characteristics of MPs in the thermal waters of Kütahya, Turkey, marking the first such exploration in the country and globally in thermal groundwater systems. Twenty-one samples (3 L each) were collected across nine regions and filtered using GF/C filters (0.45-µm pore size). Microscopic examination and μ-Raman spectroscopy revealed an average MP concentration of 0.85 ± 0.71 MPs/L (850 MPs/m3), with the highest at ST-8 (4.88 ± 2.98 MPs/L). Fibers (50%), fragments (39.8%), and films (10.2%) were identified, with polyethylene (22.2%) being the most common polymer type. Variability in MP abundance across stations suggests multiple contamination sources, including agricultural runoff, anthropogenic activities, and material used in water transport infrastructure. The findings indicate low-level MP contamination in thermal groundwater systems, which could influence both ecological health and human activities relying on these waters, such as thermal tourism and greenhouse irrigation. This pioneering study highlights the necessity for integrated waste management policies to mitigate MP pollution and underscores the role of thermal waters in understanding the transport dynamics of MPs in groundwater systems.

Assessment and treatment of microplastics in different environmental compartments of Kallar Kahar Lake-a case study

Microplastic pollution has garnered global attention in recent decades due to its recognized ecological concerns through previous studies. However, in Pakistan, scarce information has been reported on MP pollution concerning the freshwater ecosystem. The current study was conducted on Kallar Kahar Lake, Punjab, Pakistan for (1) quantification, characterization, and distribution of MPs in surface water, sediments, and fish samples and (2) two treatment processes (magnetization and coagulation + flocculation) for the removal of MPs from the water. Samples were collected from each point by grab sampling method to investigate the MPs according to their type, shape, and color. The MP quantification and analysis were accomplished via the counting method by a stereomicroscope and Fourier transform infrared spectroscopy for their polymer type and composition. Results indicated the average MP abundance as 49.6 ± 11.14 MP/500 mL, 143 ± 48.18 MP/100 g, and 79 ± 12.2 items for water, sediments, and fish correspondingly. The dominant MP colors were blue, transparent, and green in all three environmental compartments. The ATR-FTIR identified the polymer types in lake water, sediment, and fish were PPS, PIB, and PLF; PET, PE, PP, and Natural Latex Rubber; and PET, respectively. The MP removal rate was observed high in both treatments. The average % removal rate of iron ore magnetization treatment was observed to be 80% at 1300 mg/L dosage of Fe2O3. Similarly in chemical coagulation processes, the highest MP removal efficiency was 85% (PET), 83% (PPS) and 80% (PIB) at the different concentration dosages of 150 + 15 mg/L, 111 + 15 mg/L, and 150 + 111 + 15 mg/L for Combination 1, Combination 2, and Combination 3, respectively. Overall, this study provided an integrative and novel approach for the removal of MP from surface water, which also holds an explicit commercial utilization prospect to overpower the MP pollution in water bodies. Also, the current findings serve as baseline data for the study of local freshwater systems.

Groundwater quality and associated health risks in the Eastern Region of Ghana

In the Eastern Region of Ghana, 95 % of residents have access to boreholes. However, approximately 30 % of these boreholes are characterized by unpleasurable taste, odour, oily scum and particulate matter. Thus, this study aimed to assess water quality, predict the sources of groundwater contaminants, evaluate the human health risk and to generate spatial distribution and health risk maps. In achieving this, the water quality of 136 boreholes in the region was evaluated through Water Quality Index (WQI) and Groundwater Pollution Index (GPI) analyses. Multivariate statistical procedures, namely, principal component and correlation analyses were employed to define the major groundwater pollutants and their possible sources. Non-carcinogenic health risk to infants, children and adults through nitrates, iron, manganese and fluorides ingestion was also assessed. The results revealed that groundwater in the region is generally slightly acidic with a mean pH of 6.30. WQI analysis grouped 68 % of the groundwater samples under the 'excellent' and 'good' water types with the remaining percent categorized under 'poor', 'very poor' and 'unsafe' drinking water types. GPI analysis classified 95 %, 2.21 % and 2.79 % of the boreholes as 'insignificant', 'low' and 'highly' polluted zones. From the multivariate analyses, the dominant pollutants were iron, manganese, chlorides, sodium, fluorides, potassium, turbidity, total suspended and dissolved solids, hardness, alkalinity, sulphates, nitrates and phosphates. The sources of these contaminants are primarily from rock-water interactions and fertilizers. Health risk assessment for nitrates, fluorides, iron and manganese ingestion revealed that 23, 17 and 15 boreholes in the region are likely to pose non-carcinogenic health risk to infants, children and adults respectively. Health risk maps indicated that the most vulnerable districts were Atiwa East, Fanteakwa North, Achiase, Birim South, Akwapim, Suhum and Ayensuano. From these findings, it is imperative that appropriate groundwater remediation measures are implemented in the region to protect public health.

Significance of Morphology in Characterizing Human Health Risk from di(2-ethylhexyl) Phthalate in Polyvinyl Chloride Microplastics in Groundwater

In this study, a human health risk assessment was performed on the ingestion route of groundwater containing polyvinyl chloride (PVC) microplastics (MPs), and the carcinogenic and non-carcinogenic risks of di(2-ethylhexyl) phthalate (DEHP), a representative additive, were determined. In particular, the impact of volume diversity according to the shape (morphology) of PVC MP (fragment, fiber, film) on the risk characterization was intensively explored. Firstly, a continuous particle size distribution following a power function was derived using the abundance ratio of PVC MPs by size in the investigated groundwater, and human health risk assessment for DEHP in the PVC MPs was performed through the volume distribution according to the shape of MPs. DEHP human health risk assessment showed an excess cancer risk (ECR) of below 10-6 for a 95% cumulative probability for all MP shapes, but the values varied depending on the shape. Sensitivity analysis showed that the parameter that most affected human health risk was MP volume, second to concentration, which is dependent on MP shape. Therefore, it is necessary to consider the variety of MP shapes during human health risk assessment, and it can be achieved through probabilistic risk assessment utilizing the probability distribution for size and shape of MPs.

Global distribution, drivers, and potential hazards of microplastics in groundwater: A review

Since microplastics (MPs) were first detected in groundwater, an increasing number of studies have focused on groundwater pollution by MPs. However, knowledge of the global properties of groundwater MPs: distribution, concentration, composition, and morphology remains limited, while potential factors regulating their transport and distribution in groundwater, especially the hydrogeological background and climate warming conditions, have been omitted from most analyses. Furthermore, previous field investigations did not assess the risks posed by groundwater MPs to the environment and to human health, a necessary preliminary to remediation. In this work, to promote future MP pollution studies and remediation policies, we assimilated and synthesized the current knowledge on this topic. We reviewed current data on global groundwater pollution by MPs, analyzed the driving factors of their transport and distribution, and summarized the ecological and health hazards posed by MPs, before discussing current knowledge limits and suggesting perspectives for future work.

Characterization of microplastics in soil, leachate and groundwater at a municipal landfill in Rayong Province, Thailand

Recent years have witnessed a dramatic increase in global plastic production, leading to heightened concerns over microplastics (MPs) contamination as a significant environmental challenge. MP particles are ubiquitously distributed across both continental and marine ecosystems. Given the paucity of research on MPs in Thailand, particularly regarding MPs contamination in terrestrial environments, this study focused on investigating the distribution and characteristics of MPs in a landfill area. We collected 15 soil samples, 2 leachate samples, and 7 groundwater samples from both inside and outside a municipal landfill situated in the urbanized coastal region of Rayong Province. Our findings revealed variability in MPs concentration across different sample types. In soil, the MP count ranged from 240 to 26,100 pieces per kg of dry soil, 58.71 % of all sample sizes are lower than 0.5 mm. Similarly, the size found in the leachate sample, and the average MP in the leachate samples was 139 pieces per liter of MPs. The groundwater samples showed a fluctuation in MPs count from 18 to 94 pieces per liter, and the size of MPs ranged mostly from 0.5 to 1 mm. The predominant forms of MPs identified were sheets, followed by fragments, fibers, and granules. According to μ-FTIR analysis, the majority of the MPs were composed of polyethylene and polypropylene, commonly used in plastic packaging and ropes. The observed high concentrations and extensive distribution of MP contamination underscore the urgency for further studies and effective management strategies to mitigate the adverse impacts of this pollution on various organisms and ecosystems.

Limits, challenges, and opportunities of sampling groundwater wells with plastic casings for microplastic investigations

Investigating microplastics (MPs) in groundwater suffers from problems already faced by surface water research, such as the absence of common protocols for sampling and analysis. While the use of plastic instruments during the collection, processing, and analysis of water samples is usually avoided in order to minimize unintentional contamination, groundwater research encompassing MPs faces unique challenges. Groundwater sampling typically relies on pre-existing monitoring wells (MWs) and water wells (WWs) that are often constructed with polyvinyl chloride (PVC) casings or pipes due to their favorable price-performance ratio. Despite the convenience, however, the suitability of PVC casings for MP research is questionable. Unfortunately, the specifics of these wells are often not detailed in published studies. Current literature does not indicate significant pollution risks from PVC casings, suggesting these wells might still be viable for MP studies. Our preliminary analysis of the existing literature indicates that if PVC exceeds 6 % of the total MP concentration, it is likely that casings and pipes made of PVC are a source of pollution. Above this threshold, additional investigations in MWs and WWs with PVC casings and pipes are suggested.

A review of the influence mechanisms of climate-induced events on groundwater microplastic contamination: A focus on aquifer vulnerabilities and mitigation strategies

Climate change and plastic pollution are two main issues that our world is currently facing, and they are mainly linked through various processes, mechanisms, and chemical blueprint. Emerging issues related to microplastic (MP) contamination in freshwater are expanding and diverse research is being carried out globally. Factors causing climate change are increasing the frequency of extreme weather phenomena such as floods, drought, sea level rise, and heat waves, which can directly or indirectly influence the plastic/MP contamination in various ecosystems including groundwater environments. Here, we review the impacts of extreme weather events on MP contamination in freshwater with a specific focus on groundwater environments. This narrative review shows that flooding can have the most adverse effect on the MP pollution in groundwater environments through recharge events. Drought can also have major effects on MP pollution. Karst, alluvial, and coastal aquifers exhibit the highest levels of MP contamination among various aquifer types. Climate change's impact on different types of aquifers can vary depending on hydrogeological conditions and other factors in the groundwater environment. Prevention and comprehensive solutions are crucial for addressing MPs in the environment, with downstream measures being supplementary to upstream ones.

Combined exposure of PS-MPs with NaF induces Sertoli cell death and dysfunction via ferroptosis and apoptosis

The individual toxicity of sodium fluoride (NaF) and microplastics (MPs) has been extensively documented. Owing to their high specific surface area, widespread presence and durability, MPs can adsorb a broad spectrum of environmental contaminants into the organism. However, the combined toxicity of NaF and MPs has not been investigated. This study aimed to assess the effects of combined exposure to NaF and MPs on the function of testicular Sertoli cells (SCs) in male mice, and to investigate the underlying molecular mechanisms. The study revealed that combined exposure to NaF and MPs resulted in a decrease in the negative surface charge of MPs, along with an increase in the number of MPs entering the SCs. Through in vivo observation of the testicular pathological structure, spermatogenesis, and cell apoptosis in 180-day-old male mice, we discovered that combined exposure to NaF (80 mg/L) and MPs (10 mg/L) heightened reproductive toxicity compared to the individual exposure groups. This was evidenced by testicular structural defects, impaired spermatogenesis, and increased testicular cell apoptosis. Our in vitro studies showed that NaF (21 μg/mL) and MPs (100 μg/mL) synergistically induced SCs apoptosis and ferroptosis, leading to a reduction in SCs number and dysfunction. This ultimately resulted in structural and functional damage to the testes. Our findings demonstrate, for the first time, the synergistic effects of NaF and MPs on reproductive toxicity in mammals. These insights may provide valuable contributions to co-toxicity studies involving MPs and other environmental pollutants.

Effects of micro-nano plastics on the environmental biogeochemical cycle of nitrogen: A comprehensive review

Micro-nano plastics (MNPs; size <5 mm), ubiquitous and emerging pollutants, accumulated in the natural environment through various sources, and are likely to interact with nutrients, thereby influencing their biogeochemical cycle. Increasing scientific evidences reveal that MNPs can affect nitrogen (N) cycle processes by affecting biotopes and organisms in the environmental matrix and MNPs biofilms, thus plays a crucial role in nitrous oxide (N2O) and ammonia (NH3) emission. Yet, the mechanism and key processes behind this have not been systematically reviewed in natural environments. In this review, we systematically summarize the effects of MNPs on N transformation in terrestrial, aquatic, and atmospheric ecosystems. The effects of MNPs properties on N content, composition, and function of the microbial community, enzyme activity, gene abundance and plant N uptake in different environmental conditions has been briefly discussed. The review highlights the significant potential of MNPs to alter the properties of the environmental matrix, microbes and plant or animal physiology, resulting in changes in N uptake and metabolic efficiency in plants, thereby inhibiting organic nitrogen (ON) formation and reducing N bioavailability, or altering NH3 emissions from animal sources. The faster the decomposition of plastics, the more intense the perturbation of MNPs to organisms in the natural ecosystem. Findings of this provide a more comprehensive analysis and research directions to the environmentalists, policy makers, water resources planners & managers, biologists, and biotechnologists to do integrate approaches to reach the practical engineering solutions which will further diminish the long-term ecological and climatic risks.

Microplastics in different municipal solid waste treatment and disposal systems: Do they pose environmental risks?

Microplastic (MP) pollution is a significant worldwide environmental and health challenge. Municipal solid waste (MSW) can be an important source of MPs in the environment if treated and disposed of inappropriately, causing potential ecological risks. MSW treatment and disposal methods have been gradually shifting from landfilling/dumping to more sustainable approaches, such as incineration or composting. However, previous studies on MP characteristics in different MSW treatment and disposal systems have mainly focused either on landfills/dumpsites or composts. The lack of knowledge of multiple MSW treatment and disposal systems makes it difficult to ensure effective MP pollution control during MSW treatment and disposal. Therefore, this study systematically summarizes the occurrence of MPs in different MSW treatment and disposal systems (landfill/dumpsite, compost, and incineration) on the Eurasian scale, and discusses the factors that influence MPs in individual MSW treatment and disposal systems. In addition, the paper assesses the occurrence of MPs in the surrounding environment of MSW treatment and disposal systems and their ecological risks using the species sensitivity distribution approach. The study also highlights recommendations for future research, to more comprehensively describe the occurrence and fate of MPs during MSW treatment and disposal processes, and to develop appropriate pollution control measures to minimize MP pollution.

Presence of microplastics in the groundwater of volcanic islands, El Hierro and La Palma (Canary Islands)

The increasing amount of plastic litter worldwide is a serious problem for the environment and its biodiversity, ecosystems, animal and human welfare and the economy. The degradation of these plastics leads to microplastics (MPs), which have been reported for the first time in groundwater in the Canary archipelago. This research investigates the presence of MPs at nine different points on La Palma and El Hierro, where samples were collected in galleries, wells and springs during the month of December 2022. Six different polymers were found with Fourier transform infrared spectroscopy (FTIR) - polypropylene (PP), polyethylene (PE), cellulose (CEL), polyethylene terephthalate (PET), polystyrene (PS) and polymethyl methacrylate (PMMA). The particle concentrations found ranged from 1 to 23 n/L, with a maximum particle size of 1900 μm, the smallest being 35 μm. PP and PE were the most common polymers found in the analysis, associated with the use of packaging, disposable products, textiles and water pipes, related to poorly maintained sewerage networks where leaks occur, allowing these MPs to escape into the environment and end up in groundwater. The detection of microplastic pollution in groundwater emphasises environmental hazards, including biodiversity disruption and water source contamination. Additionally, it presents potential risks to human health by transferring contaminants into the food chain and through respiratory exposure.

Microplastics and associated chemicals in drinking water: A review of their occurrence and human health implications

Microplastics (MPs) have entered drinking water (DW) via various pathways, raising concerns about their potential health impacts. This study provides a comprehensive review of MP-associated chemicals, such as oligomers, plasticizers, stabilizers, and ultraviolet (UV) filters that can be leached out during DW treatment and distribution. The leaching of these chemicals is influenced by various environmental and operating factors, with three major ones identified: MP concentration and polymer type, pH, and contact time. The leaching process is substantially enhanced during the disinfection step of DW treatment, due to ultraviolet light and/or disinfectant-triggered reactions. The study also reviewed human exposure to MPs and associated chemicals in DW, as well as their health impacts on the human nervous, digestive, reproductive, and hepatic systems, especially the neuroendocrine toxicity of endocrine-disrupting chemicals. An overview of MPs in DW, including tap water and bottled water, was also presented to enable a background understanding of MPs-associated chemicals. In short, certain chemicals leached from MPs in DW can have significant implications for human health and demand further research on their long-term health impacts, mitigation strategies, and interactions with other pollutants such as disinfection byproducts (DBPs) and per- and polyfluoroalkyl substances (PFASs). This study is anticipated to facilitate the research and management of MPs in DW and beverages.

Effects of groundwater sample volume on identified microplastics in groundwater of an agricultural area in Korea

Groundwater serves various purposes worldwide, including agricultural, drinking, domestic, and industrial uses. In the Republic of Korea, groundwater is used primarily for agricultural purpose. Understanding the quality of groundwater is crucial because microplastics (MPs) can enter groundwater through agricultural activities and potentially pose harm to humans. Therefore, groundwater sampling plays a vital role in determining the presence of MPs. However, the optimal volume of groundwater sampling required for accurate MP assessment remains uncertain. This study examined the optimal sample size for collecting MPs from groundwater in the heavy agricultural area of the Haean Basin, Korea. Groundwater sampling and MP analyses were conducted during the wet and dry seasons of 2022. A total of 500 L of groundwater was continuously sampled in increments of 100 L to 500 L (100, 200, 300, 400, and 500 L). Additionally, we investigated the land use surrounding the sampling wells and the predominant types of plastics used in agriculture. To ensure reliable MP analysis, precautions were taken to minimize plastic contact during sampling, pretreatment, and μ-FTIR analysis. The concentration of MPs in groundwater ranged from 0.04 to 17.77 particles/L during the wet season and from 0 to 0.56 particles/L during the dry season. The highest concentration of MPs was observed at the first 100 L sample volume, with concentrations decreasing as the sampling volume increased. Fragmented particles accounted for 86.3 % during the wet season and 91.5 % during the dry season, whereas fibers constituted 13.7 and 8.5 %, respectively. MPs in the size range of 20-100 μm were predominant in both seasons. The polymers identified in both seasons were polypropylene (PP), polyethylene (PE), polyvinyl chloride (PVC), and polyamide (PA). While some studies suggest that 500 L is the optimal sample volume for assessing MPs in groundwater, the findings of this study indicate that a larger sample volume may be necessary. This study was the first attempt to determine the optimum sample volume required to collect MPs from groundwater, emphasizing the importance of conducting further research to validate these findings.

Sustainable governance of drinking water conservation areas based on adaptive thresholds

Drinking water quality is integral to the Sustainable Development Goals framework. At the present, China's drinking water conservation faces a number of challenges that are partially brought on by strict conservation measures that don't fully take into account human-land conflict and sustainable development. Taking the idea of adaptive governance, this study seeks to identify adaptive thresholds and adaptive solutions for compatible drinking water conservation and local development. Pressure and resistance to drinking water quality in its status, future potential, and adaptive thresholds were explored to identify sustainable governance for the Baimei Conservation Area, Fujian Province. Field research, local governance forums, and the Soil and Water Assessment Tool (SWAT) model were utilized to explore the drinking water quality pressure and resistance to drinking water quality. In order to uncover potential future changes in pressure and resistance, suitability analyses and multi-scenario simulations were used to examine the status quo, pressure, and resistance scenarios. Adaptive thresholds were then identified through SWAT modeling of each scenario to guarantee the drinking water quality is greater than Class II in the Core Conservation Area and Class Ⅲ in 2nd-grade Conservation Area, respectively. The research finds that construction land development and farming are the key pressures on drinking water quality, and forests and wetlands are the primary resistances. The expansion of construction lands and the increased wetlands was centered on potential future scenarios because farming has no room for growth and forests are already heavily covered. The adaptive threshold of construction land expansion is identified to be 10% without new wetlands but can be 20% by adding 10% wetlands in subbasins, 5, 8, and 9. This study confirms the potential of adaptive sustainability for drinking water conservation areas. A similar analysis procedure can also be adapted to enhance adaptive governance for the sustainability of other conservation areas nationally and globally.

Nano- and micro-plastic transport in soil and groundwater environments: Sources, behaviors, theories, and models

With the increasing use of plastics, nano- and micro-plastic (NMP) pollution has become a hot topic in the scientific community. Ubiquitous NMPs, as emerging contaminants, are becoming a global issue owing to their persistence and potential toxicity. Compared with studies of marine and freshwater environments, investigations into the sources, transport properties, and fate of NMPs in soil and groundwater environments remain at a primary stage. Hence, the promotion of such research is critically important. Here, we integrate existing information and recent advancements to compile a comprehensive evaluation of the sources and transport properties of NMPs in soil and groundwater environments. We first provide a systematic description of the various sources and transport behaviors of NMPs. We then discuss the theories (e.g., clean-bed filtration and Derjaguin-Landau-Verwey-Overbeek theories) and models (e.g., single-site and dual-site kinetic retention and transport models) of NMP transport through saturated porous media. Finally, we outline the potential limitations of current research and suggest directions for future research. Overall, this review intends to assimilate and outline current knowledge and provide a useful reference frame to determine the sources and transport properties of NMPs in soil and groundwater environments.

Microplastic contamination in groundwater of rural area, eastern part of Korea

Microplastics (MPs) are emerging contaminants in agricultural regions owing to the widespread use of plastics in farming activities. Groundwater has a vital role in farming activities, and it can be contaminated by MPs, fragmented from plastic products used in agricultural activities. Following an appropriate sampling protocol, this study investigated the distribution of MPs in shallow to deep aquifers (well depths: 3-120 m) and cave water of an agricultural region in Korea. Our investigation found that MPs contamination can penetrate up to the deep bedrock aquifer. The abundance of MPs was lower during the wet season (0.014-0.554 particles/L) than during the dry season (0.042-1.026 particles/L), which may be attributed to the dilution effect of precipitation in the groundwater. The abundance of MPs increased as the MPs size decreased at all sampling points, and size ranges were 20.3-869.6 and 20.3-673.0 μm in the dry and wet seasons, respectively. Our findings showed lower MPs abundance compared to previous studies, and we inferred that it might be due to differences in groundwater sampling volume, low agricultural intensity, and the non-application of sludge fertilizers. Our findings suggest that repeated and long-term investigations are needed to identify better the factors that influence the results of MPs distribution in groundwater, including sampling methods and hydrogeological and hydrological conditions.

The first evidence of microplastic occurrence in mine water: The largest black coal mining area in the Czech Republic

Climate change is creating new challenges for water supply worldwide, making the search for new sources of water vital. As mine water could serve as a potential source, this study investigated the presence of microplastics in water from terminated deep mines in the largest coal basin in the Czech Republic, as well as in water from nearby shallow wells. The particles found were analyzed for size, polymer composition, color and morphology using the ImageJ tool, infrared spectroscopy with Fourier transform (FTIR) and an optical stereomicroscope with a digital camera. Microplastics were detected in all tested sites. Their range accounted for 2.5-17.5 items/L for mine water samples and 2.5-20 items/L for well samples, with fibers being the dominant type. The average width of particles from mine water and wells amounted to 58 µm; 71 µm, length to 655 µm; 501 µm and area to 22,067 µm2; 28,613 µm2, respectively. Blue color was prevalent, among materials, in both cases, plastic coated paper was found dominant to Polyethylene terephthalate (PET), Polyester (PES), Tetrafluoroethylene-perfluoro (Propyl Vinyl Ether) - Copolymer (TFE-PPVE), and polypropylene (PP). The research provides the first evidence of microplastics' presence in underground waters from deep mines and shallow wells in the same area. The data suggest that it is almost impossible to find underground water sources free of microplastic contamination. In this context, atmospheric contamination from mine ventilation and infiltration through terminated mines were identified as potential sources, while infiltration through soil and rock formations is unlikely given the geological composition. The results of this study can serve as a relevant basis for further research on microplastics in mine waters. Additionally, the conclusions can advance the development in remediation technologies of microplastics from deep underground waters and their implementation in practice, particularly in light of upcoming legislation.