Removal of Cr(VI) from aqueous solutions via simultaneous reduction and adsorption by modified bimetallic MOF-derived carbon material Cu@MIL-53(Fe): Performance, kinetics, and mechanism

A novel graphene oxide functionalized hydrocalumite/cellulose composite for the selective and simultaneous removal of tetracycline and Cr(VI)

Tetracycline antibiotic and hexavalent chromium removal from the wastewater is crucial for preventing future environmental trouble. This study aimed to develop an eco-friendly biocomposite made from an enhanced graphene oxide-functionalized hydrocalumite/cellulose composite for co-adsorbative removal of TC antibiotic and toxic Cr(VI). The synthesized GO@CellHC composite was characterized using various microscopic techniques. The GO@CellHC composite possessed the superior removal for TC and Cr(VI), achieving 27.4 and 42.6 mg/g in single systems, and 24.8 and 39.6 mg/g in binary systems, all within 40 min. In pH results, the maximum removal was observed at an acidic pH of 3 for Cr(VI) and 5 for TC, respectively. The co-ions results demonstrated that the composite efficiently removed both pollutants, except in the presence of PO43- and CO32-. The Langmuir isotherm indicated the strongest adsorption capacity and favored both systems. Thermodynamic studies revealed that the adsorption of both systems onto the GO@CellHC composite removes TC and Cr(VI) by endothermic and spontaneous system. Kinetic results demonstrated that TC adsorption showed a higher rate constant k2 (single: 0.01676 min-1 and binary: 0.0138 min-1) compared to Cr(VI) adsorption (single: 0.01478 min-1 and binary: 0.01007 min-1). The GO@CellHC composite retained more than 80 % after three cycles, and field results suggesting that the biocomposite can be utilized for the removal of binary water pollutants.

Removal of tetracycline antibiotics from agricultural wastewater efficiently using natural attapulgite functionalized MIL-53(Fe): adsorption mechanism and thermodynamic study

An excessive utilization of tetracycline antibiotics (TCs) in aquaculture and livestock farming significantly threatens human health and the vitality of aquatic environments. In this work, we used a one-pot hydrothermal approach with APT@MIL53-X hybrid material to achieve the selective removal of TC and OTC from agricultural wastewater. APT@MIL53-X showed significant chemical stability in the 3-10 pH range. Analysis of the adsorption results using adsorption kinetics, adsorption isotherm studies and adsorption thermodynamics indicated the presence of a monolayer physicochemical adsorption process with a maximum equilibrium adsorption of 600.43 mg g-1 for TC (removal efficiency of 93.5%) and 537.71 mg g-1 for OTC (removal efficiency of 91.4%). The elimination of TCs was not significantly impacted by the common buffer system of solution or the presence of water. Furthermore, a number of characterization techniques, including FT-IR and XPS, suggested that electrostatic interactions, π-π stacking, and hydrogen were potential adsorption processes. APT@MIL53-X showed stable recycling performance, maintaining a stable adsorption amount and chemical stability after six adsorption-desorption cycles of use, which proved that APT@MIL53-X has application possibilities for the agricultural wastewater treatment process. This study illustrates that APT@MIL53(Fe)-X hybrid material offers a novel method for the selective and effective elimination of agricultural wastewater.

Bimetallic metal-organic frameworks (BMOFs) for dye removal: a review

Safe drinking water and a clean living environment are essential for good health. However, the extensive and growing use of hazardous chemicals, particularly carcinogenic dyes like methylene blue, methyl orange, rhodamine B, and malachite green, in both domestic and industrial settings, has led to a scarcity of potable water and environmental challenges. This trend poses a serious threat to human society, sustainable global development, and marine ecosystems. Consequently, researchers are exploring more advanced methods beyond traditional wastewater treatment to address the removal or degradation of these toxic dyes. Conventional approaches are often inadequate for effectively removing dyes from industrial wastewater. In this study, we investigated bimetallic metal-organic frameworks (BMOFs) as a solution to these limitations. BMOFs demonstrated outstanding dye removal and degradation capabilities due to their multifunctionality, water stability, large surface area, adjustable pore size, and recyclability. This review provides a comprehensive overview of research on dye removal from wastewater using BMOFs, including their synthesis methods, types of dyes, and processes involved in dye removal, such as degradation and adsorption. Finally, the review discusses the future potential and emerging opportunities for BMOFs in sustainable water treatment.

Implementing magnetically-active Sn-based nanocomposites in hexavalent chromium removal from drinking water

A novel nanocomposite consisting of Fe3O4-loaded tin oxyhydroxy-chloride is demonstrated as an efficient adsorbent for the removal of hexavalent chromium in compliance to the new drinking water regulation. This study introduces a continuous-flow production of the nanocomposite through the separate synthesis of (i) 40 nm Fe3O4 nanoparticles and (ii) multilayered spherical arrangements of a tin hydroxy-chloride identified as abhurite, before the application of a wet-blending process. The homogeneous distribution of Fe3O4 nanoparticles on the abhurite's morphology, features nanocomposite with magnetic response whereas the 10 % loaded nanocomposite preserves a Cr(VI) uptake capacity of 7.2 mg/g for residual concentrations below 25 μg/L. Kinetic and thermodynamic examination of the uptake evolution indicates a relative rapid Cr(VI) capture dominated by interparticle diffusion and a spontaneous endothermic process mediated by reduction to Cr(III). The efficiency of the optimized nanocomposite was validated in a pilot unit operating in a sequence of a stirring reactor and a rotary magnetic separator showing an alternative and competitive application path than typical fixed-bed filtration, which is supported by the absence of any acute cellular toxicity according to human kidney cell viability tests.

Enhanced Cr(VI) removal via CPBr-modified MIL-88A@amine-functionalized GO: synthesis, performance, and mechanism

Water contamination by heavy metals, especially chromium (VI), poses a critical environmental issue due to its carcinogenic nature and persistence in the environment. Addressing this, the current study develops an efficient adsorbent, CPBr-MIL-88A@AmGO, which utilizes the synergistic capabilities of Cetylpyridinium bromide-modified MIL-88A and amine-functionalized graphene oxide to enhance Cr(VI) removal from aqueous solutions. The obtained results indicate that CPBr-MIL-88A@AmGO achieves its highest removal efficacy at pH 2, where the interaction of CPBr and AmGO's positively charged centers significantly contributes to the adsorption processes. According to the Langmuir isotherm model, the composite's adsorption capacity reached a maximum of 306.75 mg/g. The adsorption kinetics adhered to a pseudo-second-order model along with the endothermic nature of the process. Although the presence of SO42- ions significantly reduces adsorption capacity, other interfering ions including Na+, K+, Ca2+, Cl-, and NO3- only slightly affect it. Remarkably, the composite maintains high removal efficiency, over 82%, even after 7 recycling tests, underscoring its potential for practical applications in water treatment systems. The proposed mechanism involves the contribution of electrostatic attractions, ion exchange, complexation, and the reduction of Cr(VI) to Cr(III) in the removal process. This study not only offers a potent solution for Cr(VI) remediation but also contributes to sustainable water resource management.

Adsorptive removal of heavy metals from aqueous solutions: Progress of adsorbents development and their effectiveness

Increased levels of heavy metals (HMs) in aquatic environments poses serious health and ecological concerns. Hence, several approaches have been proposed to eliminate/reduce the levels of HMs before the discharge/reuse of HMs-contaminated waters. Adsorption is one of the most attractive processes for water decontamination; however, the efficiency of this process greatly depends on the choice of adsorbent. Therefore, the key aim of this article is to review the progress in the development and application of different classes of conventional and emerging adsorbents for the abatement of HMs from contaminated waters. Adsorbents that are based on activated carbon, natural materials, microbial, clay minerals, layered double hydroxides (LDHs), nano-zerovalent iron (nZVI), graphene, carbon nanotubes (CNTs), metal organic frameworks (MOFs), and zeolitic imidazolate frameworks (ZIFs) are critically reviewed, with more emphasis on the last four adsorbents and their nanocomposites since they have the potential to significantly boost the HMs removal efficiency from contaminated waters. Furthermore, the optimal process conditions to achieve efficient performance are discussed. Additionally, adsorption isotherm, kinetics, thermodynamics, mechanisms, and effects of varying adsorption process parameters have been introduced. Moreover, heavy metal removal driven by other processes such as oxidation, reduction, and precipitation that might concurrently occur in parallel with adsorption have been reviewed. The application of adsorption for the treatment of real wastewater has been also reviewed. Finally, challenges, limitations and potential areas for improvements in the adsorptive removal of HMs from contaminated waters are identified and discussed. Thus, this article serves as a comprehensive reference for the recent developments in the field of adsorptive removal of heavy metals from wastewater. The proposed future research work at the end of this review could help in addressing some of the key limitations facing this technology, and create a platform for boosting the efficiency of the adsorptive removal of heavy metals.

Design and application of metal organic frameworks for heavy metals adsorption in water: a review

The growing apprehension surrounding heavy metal pollution in both environmental and industrial contexts has spurred extensive research into adsorption materials aimed at efficient remediation. Among these materials, Metal-Organic Frameworks (MOFs) have risen as versatile and promising contenders due to their adjustable properties, expansive surface areas, and sustainable characteristics, compared to traditional options like activated carbon and zeolites. This exhaustive review delves into the synthesis techniques, structural diversity, and adsorption capabilities of MOFs for the effective removal of heavy metals. The article explores the evolution of MOF design and fabrication methods, highlighting pivotal parameters influencing their adsorption performance, such as pore size, surface area, and the presence of functional groups. In this perspective review, a thorough analysis of various MOFs is presented, emphasizing the crucial role of ligands and metal nodes in adapting MOF properties for heavy metal removal. Moreover, the review delves into recent advancements in MOF-based composites and hybrid materials, shedding light on their heightened adsorption capacities, recyclability, and potential for regeneration. Challenges for optimization, regeneration efficiency and minimizing costs for large-scale applications are discussed.

Addressing the issue of surface mechanisms and competitive effects in Cr(VI) reductive-adsorption on tin-hydroxyapatite in the presence of co-ions

Our group recently proposed an innovative sustainable reductant-adsorbent material, tin(II)-hydroxyapatite (Sn/HAP, ca. 10 wt% Sn) for the interfacial Cr(VI) reductive adsorption process. In this study, Cr(VI) removal capacity was evaluated in multi-component solutions containing representative background ions (i.e., CaCl2, Ca(NO3)2, MgSO4, Na2SO4, Fe(NO3)3, AlCl3, Zn(NO3)2, or Mn(NO3)2). Sn/HAP was able to reduce Cr(VI) with complete Cr3+ adsorption on HAP surface, except in the presence of Fe3+ and Al3+ ions. Some metal ions co-existing in solution, such as Fe3+, Al3+, Zn2+, and Mn2+, were also adsorbed on HAP surface. Reuse experiments of the Sn/HAP sample, up to 7 runs, resulted in a total amount of reduced Cr(VI) of ca. 15-18 mg g-1. Fast kinetics of Cr(VI) reductive adsorption at 25 °C in a multi-metal component solution was observed. The pseudo-second order model was in excellent agreement with the experimental kinetic data, leading to a rate constant (k25°C) value of ca. 30 M-1 s-1. The collection of adsorption isotherms of Cr3+ and Fe3+, together with TEM-EDX analysis permitted the unveiling of competitive adsorption phenomena between metal ions. The obtained results demonstrate that Sn/HAP could be an efficient material for the removal of hexavalent chromium in aqueous solutions containing high concentrations of inorganic impurities.

Adsorption performance and kinetics of Cr(VI) onto activated carbons derived from the waste leaves of invasive plants Rhus typhina and Amorpha fruticosa

To maximize the potential of biomass from invasive plants, waste leaves from Rhus typhina (RT) and Amorpha fruticosa (AF) were used to prepare activated carbons (ACs) for the efficient removal of chromium from wastewater. Six ACs were prepared by CO2 activation at 850 °C with varying flow rates (500, 1000, and 1500 mL/min) and characterized by yield, pH, N2 adsorption isotherm, FTIR, SEM, TG, and XPS. The adsorption isotherm and kinetics for chromium removal were analyzed. The outcomes showed that the ACs had mesoporous structures with specific surface areas of 408.05-701.01 m2/g and pore volumes of 0.360-0.653 cm3/g. The pores are distributed among the agglomerated nanoparticles on the surface of the granules. The existence of two kinds of chromium compounds and two valance states, Cr(III) and Cr(VI), in spent ACs was identified by the FTIR and XPS spectra. The Cr (VI) equilibrium data and adsorption kinetics were well-fit with the Langmuir isotherm (R2 = 0.936-0.967) and pseudo-second-order kinetic models (R2 = 0.795-0.937). The maximum Langmuir Cr adsorption capacities of ACRT1.0 and ACAF0.5 were estimated to be 266.54 and 255.21 mg/g at pH = 2.0, respectively. Concentrations of Cr(III) and Cr(VI) in filtrates after equilibrium, combined with XPS and TGA analysis of spent ACs, illustrated that Cr(VI) was converted to the less harmful trivalent chromate Cr(III) during the adsorption processes. Cr(III) and Cr(VI) probably formed compounds with carbon and nitrogen atoms on the surfaces of ACs. ACs with abundant surface N-H groups achieved high Cr adsorption performance. The waste leaves from these invasive plants are suitable for producing cost-effective and efficient ACs for removing Cr (VI) from water by chemical adsorption.

Characterization of an Iron-Copper Bimetallic Metal-Organic Framework for Adsorption of Methyl Orange in Aqueous Solution

Iron-based organic frame material MIL-53 (Fe) was synthesized by the hydrothermal method with Cu2+ incorporated to obtain bimetallic composite MIL-53 (Fe, Cu). The structure and morphology of the material were characterized by SEM, XRD, BET, FTIR, XPS, and zeta potential. The adsorption performance of MIL-53 (Fe, Cu) on methyl orange was tested under a variety of conditions, including the effects of pH and material dosage, by the static adsorption test. The results show that under the condition of pH = 7, a temperature of 30°C, and an adsorbent dosage of 20 mg, the removal rate of MIL-53 (Fe, Cu) for methyl orange can reach more than 96% within 4 h, and the maximum adsorption capacity after fitting by the thermodynamic model can reach 294.43 mg/g, showing the excellent adsorption performance of MIL-53 (Fe, Cu) on methyl orange. In addition, by exploring the adsorption mechanism of MIL-53 (Fe, Cu) on methyl orange, it is found that the adsorption of MIL-53 (Fe, Cu) on methyl orange depends on chemical adsorption, as evidenced by combining Fe3+ and Cu2+ in the material with methyl orange molecules to form complexes to achieve adsorption. While the specific surface area of the material had no obvious effect on adsorption, the effects of pH, temperature, and concentration were explored. At a pH of 6.5, greater adsorption occurred at higher temperatures, as determined by thermodynamic model fitting, as well as with higher initial methyl orange molecule concentration.

Research Progress of Treatment Technology and Adsorption Materials for Removing Chromate in the Environment

Cr is used extensively in industry, so the number of Cr (VI) hazards is increasing. The effective control and removal of Cr (VI) from the environment are becoming an increasing research priority. In order to provide a more comprehensive description of the research progress of chromate adsorption materials, this paper summarizes the articles describing chromate adsorption in the past five years. It summarizes the adsorption principles, adsorbent types, and adsorption effects to provide methods and ideas to solve the chromate pollution problem further. After research, it is found that many adsorbents reduce adsorption when there is too much charge in the water. Besides, to ensure adsorption efficiency, there are problems with the formability of some materials, which impact recycling.

Ultrafast short-range catalytic pathway modified peroxymonosulfate activation over CuO with surface oxygen defects for tetracycline hydrochloride degradation

The presence of antibiotics in water bodies seriously threatens the ecosystem and human health. Advanced oxidation processes (AOPs) based on peroxymonosulfate (PMS), an effective method to remove antibiotics, have a bottleneck problem that the low oxidant utilization is attributed to the hindered electron transfer between metal oxides and peroxides. Here, CuO with rich oxygen vacancies (OVs), MSCuO-300, was synthesized to efficiently degrade tetracycline hydrochloride (TTCH) (k = 0.095 min^-1). The dominant role of direct adsorption and activation of OVs and its regulated Cu-O, rather than surface hydroxyl adsorption, mediated a short-range catalytic pathway. The shortened catalytic pathway between active sites and PMS accelerated the charge transfer at the interface, which promoted PMS activation. Compared with Cu_xO-500 and Commercial CuO, the activation rate of PMS was increased by 11.97, and 12.64 times, respectively. OVs contributed to the production of ¹O₂ and O₂^•-, the main active species. In addition, MSCuO-300/PMS showed excellent adaptability to real water parameters, such as pH (3-11), anions, and continuous reactor maintained for 168 h. This study provides a successful case for the purification of antibiotic-containing wastewater in the design of efficient catalysts by oxygen defect strategies.

Design of Zr-MOFs by Introducing Multiple Ligands for Efficient and Selective Capturing of Pb(II) from Aqueous Solutions

The existence of lead ions seriously affects the quality of many metal products in metallurgical enterprises. Currently, the various methods of lead-ion removal tried by researchers will affect valuable metals in the removal process, thus resulting in low economic efficiency. In this study, a novel metal-organic framework adsorbent (UiO-FHD) which efficiently and selectively captures lead ions is developed by introducing multiple ligands. The maximum adsorption capacity of lead ions is 433.15 mg/g at pH 5. The adsorption process accords with the pseudo-second-order kinetic and the Langmuir isotherm models at room temperature. Thermodynamic experiments indicate that the removal of Pb(II) is facilitated by appropriate temperature reduction. The performance tests indicate that UiO-FHD maintains a high removal rate of 90.35% for Pb(II) after four consecutive adsorption-desorption cycles. The distribution coefficient of lead ions (26.7 L/g) shows that UiO-FHD has excellent selective adsorption for lead ions. It is revealed that the chelation of the sulfhydryl groups and the electrostatic interaction of the hydroxyl groups are the dominant factors to improve the removal rate of Pb(II) by density functional theory calculations. This study clarifies the value of self-designed novel organic ligands in metal-organic framework materials that selectively capture heavy-metal ions.

Robust DUT-67 material for highly efficient removal of the Cr(VI) ion from an aqueous solution

Robust DUT-67 was synthesized by the hydrothermal method and characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). To systematically study the removal of Cr(VI) ion by DUT-67, single-factor, competition ion, material regeneration, kinetic, and thermodynamic experiments were designed. The experimental results show that DUT-67 had a maximum removal rate of 96.1% and a maximum adsorption capacity of 105.42 mg g^-1 with material regeneration and outstanding selective adsorption. In addition, the process of removal of the Cr(VI) ion from an aqueous solution by DUT-67, which accorded with the pseudo-second-order kinetics model and Langmuir model, was studied, and its adsorption mechanism was reasonably explained by the theoretical calculation.