MXenes and MXene-based materials for removal of pharmaceutical compounds from wastewater: Critical review

Exploring the synergistic effect of MXene@ZIF-8 hybrid composites for water treatment

Due to their exceptional physical and chemical properties, MXenes have been the focus of growing research attention for their potential to effectively eliminate a wide range of pollutants from the aquatic environment. However, disadvantages such as limited adsorption capacity due to low specific surface area and undeveloped porosity have led to challenges in using these materials. In this work, we use a well-known MXene, Ti3C2Tx, by decorating zeolitic imidazole frameworks (ZIF-8) between MXene layers (MX@ZIF) to remove methyl orange (MO) and ciprofloxacin (CIP), as well as, the effect of -O and -OH terminal groups on adsorption efficiency of MX@ZIF substrate is investigated. Our findings from molecular dynamics simulations showed that the MXO@ZIF and MXOH@ZIF systems have stronger electrostatic interactions than the MX@ZIF system due to the formation of hydrogen bonds between the -O, -OH terminal groups from the substrates and heteroatoms of pollutant molecules. Moreover, the van der Waals energy values in the MXOH@ZIF-CIP and MXOH@ZIF-MO systems are - 253.454 and - 201.660 kJ/mol, respectively, demonstrating the effective adsorption and removal of contaminants by designed substrates. The MD results show that the van der Waals interaction has a greater contribution than the electrostatic interaction in studied systems. Also, the number of contacts of pollutant molecules with the substrate increases with time, and the highest number of contacts belongs to the MXOH@ZIF-CIP and MXOH@ZIF-MO complexes, demonstrating that this substrate has a greater tendency to adsorb pollutants. Furthermore, the results of AIM calculations confirm the presence of non-covalent interactions between pollutant molecules and studied substrates. This study shows that MXOH/ZIF can be considered a promising high-performance adsorbent for removing organic dyes and antibiotics.

Novel S-scheme based nanocomposite of MXene/V2O5 for environmental remediation towards sustainable development: An insight into influencing parameters

In this study, a novel 2D/2D nanocomposite of MXene and V2O5 was synthesized using a facile hydrothermal approach for the efficient removal of crystal violet (CV), a textile dye from contaminated water to achieve Sustainable Development Goal (SDG) 14; "Save Lives Below Water". Here, the catalytic performance of pristine MXene was prominently boosted with the introduction of ball milled V2O5 as an electron generating agent. The degradation efficiency of synthesized nanocomposite significantly enhanced from 57 % to 92 %, 41 % - 76 % and 7 % - 58 % with an error of ±2 % as compared to pristine MXene at 10, 20 and 30 ppm concentrations of CV, respectively. The effective degradation of pollutants is ascribed to the electron-transfer via S-scheme based mechanism and helps in reducing recombination rate of photogenerated carriers, which could produce hydroxyl radicals (OH.) as a primary species for effectively degradation of pollutants. The superior performance of nanocomposite is attributed to: (i) the optimized surface charge (-27.8 mV), (ii) small value of charge transfer resistance (Rct = 1.3 Ω), (iii) enhanced value of carrier concentration (6.3 X 1032 cm-3), (iv) small recombination rate of excitons and (v) high specific surface area as compared to pristine samples. Moreover, to strengthen the findings, scavenger study and electron paramagnetic resonance (EPR) study were carried out and concluded that hydroxyl radicals (OH.) are the primary species in the mineralization of CV dye. The values of lande g-factor are calculated using EPR plots which comes out to be 2.03 and 2.04 for (O2.-) and (OH.) radicals, respectively and demonstrates the formation of free radicals during catalytic reactions. The Chemical Oxygen Demand (COD) analysis was carried out before and after the removal of CV using MV nanocomposite and confirms the reduction in COD vlaue of 81.60 %. The reusability experiment confirms stability of synthesized sample and provides a good shred for industrial applications in the treatment of wastewater and getting out cleaner productions and to save marine ecosystem.

Support based metal incorporated layered nanomaterials for photocatalytic degradation of organic pollutants

An effective approach to producing sophisticated miniaturized and nanoscale materials involves arranging nanomaterials into layered hierarchical frameworks. Nanostructured layered materials are constructed to possess isolated propagation assets, massive surface areas, and envisioned amenities, making them suitable for a variety of established and novel applications. The utilization of various techniques to create nanostructures adorned with metal nanoparticles provides a secure alternative or reinforcement for the existing physicochemical methods. Supported metal nanoparticles are preferred due to their ease of recovery and usage. Researchers have extensively studied the catalytic properties of noble metal nanoparticles using various selective oxidation and hydrogenation procedures. Despite the numerous advantages of metal-based nanoparticles (NPs), their catalytic potential remains incompletely explored. This article examines metal-based nanomaterials that are supported by layers, and provides an analysis of their manufacturing, procedures, and synthesis. This study incorporates both 2D and 3D layered nanomaterials because of their distinctive layered architectures. This review focuses on the most common metal-supported nanocomposites and methodologies used for photocatalytic degradation of organic dyes employing layered nanomaterials. The comprehensive examination of biological and ecological cleaning and treatment techniques discussed in this article has paved the way for the exploration of cutting-edge technologies that can contribute to the establishment of a sustainable future.

A critical review of MXene-based composites in the adsorptive and photocatalysis of hexavalent chromium removal from industrial wastewater

The growing concern of water pollution is a critical issue stemming from industrialization and urbanization. One of the specific concerns within this broader problem is the toxicity associated with chromium (Cr), especially in its Cr (VI) form. Transition metal carbides/nitrides (MXenes) are attractive materials for the treatment of water due to their unique properties such as layered structure, high surface area, conductivity, flexibility, scalable manufacture, and surface functions. Adsorption and photocatalysis reactions are the two promising methods for the removal of Cr (VI) by using MXenes. Still, most of the previous reviews were limited to the single application area. Hence, this review covers recent developments in MXene-based composites, highlighting their dual role as both adsorbents and photocatalysts in the removal of Cr (VI). MXene-based composites are found to be effective in both adsorption and photodegradation of Cr (VI). Most MXene-based composites have demonstrated exceptional removal efficiency for Cr (VI), achieving impressive adsorption capacities ranging from 100 to 1500 mg g-1 and degradation percentages between 80% and 100% in a relatively short period. The active functional groups present on the surface of MXene have a viable impact on the adsorption and photodegradation performance. The mechanism of Cr (VI) removal is explained, with MXenes playing a key role in electrostatic attraction for adsorption and as co-catalysts in photocatalysis. However, MXene-based composites have limitations such as instability, competition with co-existing ions, and regeneration challenges. Further research is needed to address these limitations. Additionally, MXene-based composites hold promise for addressing water contamination, heavy metal removal, hydrogen production, energy storage, gas sensing, and biomedical applications.

Advances in MXene-based technologies for the remediation of toxic phenols: A comprehensive review

The pressing global issue of organic pollutants, particularly phenolic compounds derived primarily from industrial wastes, poses a significant threat to the environment. Although progress has been made in the development of low-cost materials for phenolic compound removal, their effectiveness remains limited. Thus, there is an urgent need for novel technologies to comprehensively address this issue. In this context, MXenes, known for their exceptional physicochemical properties, have emerged as highly promising candidates for the remediation of phenolic pollutants. This review aims to provide a comprehensive and critical evaluation of MXene-based technologies for the removal of phenolic pollutants, focusing on the following key aspects: (1) The classification and categorization of phenolic pollutants, highlighting their adverse environmental impacts, and emphasizing the crucial need for their removal. (2) An in-depth discussion on the synthesis methods and properties of MXene-based composites, emphasizing their suitability for environmental remediation. (3) A detailed analysis of MXene-based adsorption, catalysis, photocatalysis, and hybrid processes, showcasing current advancements in MXene modification and functionalization to enhance removal efficiency. (4) A thorough examination of the removal mechanisms and stability of MXene-based technologies, elucidating their operating conditions and stability in pollutant removal scenarios. (5) Finally, this review concludes by outlining future challenges and opportunities for MXene-based technologies in water treatment, facilitating their potential applications. This comprehensive review provides valuable insights and innovative ideas for the development of versatile MXene-based technologies tailored to combat water pollution effectively.

Fabrication of a Novel Z-Scheme AgBiO3/BiOCl Heterojunction with Excellent Photocatalytic Performance towards Organic Pollutant

A novel and highly efficient photocatalyst of a AgBiO3/BiOCl heterojunction has been developed via a facile water bath and in situ precipitation method. The photocatalytic activities of the catalysts were investigated by the degradation of ciprofloxacin (CIP) under visible-light irradiation (>420 nm). The experiment results revealed that the photocatalytic performance of the optimized AgBiO3/BiOCl heterojunction was much higher than pure AgBiO3 and BiOCl. The degradation efficiency of the as-prepared AgBiO3/BiOCl heterojunction (ABC-30) for CIP could reach 88% within 160 min, with 2.89 and 3.76 times higher activity than pure AgBiO3 and BiOCl, respectively. The improved photocatalytic performance of AgBiO3/BiOCl was attributed to the synergistic effect of the enhanced light absorption range and effective separation and transfer of the photo-induced charge carrier. The optimized heterojunction showed broad-spectrum catalytic activities towards various organic contaminants. The degradation efficiencies varied with the nature of the pollutant and decreased in the following order: Lanasol Red 5B (100%) > methyl orange (99%) > methylene blue (98%) > tetracycline (92%) > ciprofloxacin (88%) > ofloxacin (85%) > norfloxacin (78%) > rhodamine B (59%) > metronidazole (43%) > phenol (40%) > carbamazepine (20%). Furthermore, the trapping experiments and ESR indicated that superoxide radicals and holes were the main reactive species.

Self-validating photothermal and electrochemical dual-mode sensing based on Hg2+ etching Ti3C2 MXene

Mercury ions can cause serious damage to the ecological environment, and it is necessary to develop reliable and elegant mercury ion sensors. In this protocol, a label-free photothermal/electrochemical dual-mode strategy for Hg2+ is proposed based on delaminated Ti3C2 MXene nanosheets (DL-Ti3C2 MXene). Hg2+ exists in water in the form of HgCl2, Hg(OH)2, and HgClOH, and the electron-rich elements O and Cl can specifically bind to the positively charged DL-Ti3C2 MXene at the edge, and further oxidation-reduction reaction occurs to obtain TiO2/C and Hg2Cl2. In view of the reduction activity and the performance of photothermal conversion of DL-Ti3C2 MXene itself, the electrochemical and photothermal responses decrease with the increase of the logarithm of Hg2+ concentration. The corresponding linear ranges are 50 pmol L-1-500 nmol L-1 and 1 nmol L-1-50 μmol L-1, and their detection limits calculated at 3 S/N are 17.2 pmol L-1 and 0.43 nmol L-1, respectively. DL-Ti3C2 MXene has the characteristics of a wide range of raw materials, low cost, and easy preparation. In addition, the design takes full advantage of the properties of the material itself, avoids the complex assembly and detection process of conventional sensors, and enables high selectivity and sensitivity for mercury detection. In particular, the dual-mode sensing endows self-confirmation of mercury ion detection results, thereby improving the reliability of the sensor.

MXenes as emerging adsorbents for removal of environmental pollutants

MXenes are a recently emerging class of two-dimensional nanomaterials that have gained considerable interest in the field of environmental protection. Owing to their high surface area, abundant terminal groups, and unique two-dimensional layered structures, MXenes have demonstrated high efficacy as adsorbents for various pollutants. Here we focused on the latest developments in the field of MXene-based adsorbents, including the structure and properties of MXenes, their synthesis and modification methods, and their adsorption performance and mechanisms for various pollutants. Among the pollutants that have been reported to be adsorbed by MXenes are radionuclides (U(VI), Sr(II), Cs(I), Eu(III), Ba(II), Th(IV), and Tc(VII)/Re(VII)), heavy metals (Hg(II), Cu(II), Cr(VI), and Pb(II)), dyes, per- and polyfluoroalkyl substances (PFAS), antibiotics (tetracycline, ciprofloxacin, and sulfonamides), antibiotic resistance genes (ARGs), and other contaminates. Moreover, future directions in MXene research are also suggested in this review.

Metformin-modified polyethersulfone magnetic microbeads for effective arsenic removal from apatite soil leachate water

Arsenic is the hazardous species and still is the global challenge in water treatment. Apatite soil is highly rich in arsenic species, and its mining presents various environmental issues. In this study, novel magnetic microbeads as adsorbent were developed for the elimination of hazardous arsenic ions from apatite soil's aqueous leachate before discharging into environment. The microbeads were fabricated with metformin polyether sulfone after being doped with zero-valent iron (Met-PES/ZVI). The microbeads were characterized using various techniques, including FTIR, XRD, SEM-EDX, VSM, and zeta potential analysis. The developed adsorbent demonstrated a significant elimination in arsenic in aqueous leachate, achieving 82.39% removal after 30 min of contact time, which further increased to 90% after 180 min of shaking. The kinetic analysis revealed that the pseudo-second-order model best represented the adsorption process. The intra-particle diffusion model indicated that the adsorption occurred in two steps. The Langmuir model (R2 = 0.991), with a maximum adsorption capacity of 188.679 mg g-1, was discovered to be the best fit for the experimental data as compared Freundlich model (R2 = 0.981). According to the thermodynamic outcome (ΔG < -20 kJ/mol), the adsorption process was spontaneous and involved physisorption. These findings demonstrate the potential of magnetic Met-PES/ZVI microbeads as an efficient adsorbent for the removal of arsenic from apatite soil aqueous leachate.

Theoretical design of transition metal-doped oxo-triarylmethyl as a disposable platform for adsorption of ibuprofen

Emerging environmental contaminants have become a crucial environmental issue because of the highly toxic effluents emitted by factories. Ibuprofen (IBP), as a typical anti-inflammatory drug, is frequently detected in water sources. Therefore, its removal using various adsorbents has drawn great interest. Herein, the structural, electronic, energetic, and optical properties of pristine oxo-triarylmethyl (oxTAM) and transition metal-doped oxo-triarylmethyl (TM@oxTAM, TM = Sc, Ti, V, Cr, and Mn) for adsorption of the IBU drug were investigated using density functional theory (DFT) calculations implemented in Gaussian and VASP codes. Frontier molecular orbital (FMO), density of states (DOS), and electronic band structure results demonstrated that transition metal-doped oxTAM causes a significant reduction in the energy band gap (Eg) value of pristine oxTAM, with the highest decrease (30.14 %) in the case of Mn@oxTAM. It was found that transition metal doping onto oxTAM leads to an increase in the adsorption energies (1.20-2.64 eV) and charge density between transition metal and IBU. Natural bond orbital (NBO) analysis revealed that charge was effectively transferred from the IBU towards the transition metal, which was further analyzed by charge decomposition analysis (CDA). Furthermore, quantum theory of atoms in molecules (QTAIM), interaction region indicator (IRI), electron localization function (ELF), and radial distribution function (RDF) analyses revealed that the IBU is adsorbed on the Sc@oxTAM surface via covalent interactions, while electrostatic with partially covalent interactions are dominated in other IBU/TM@oxTAM complexes. The results suggest that TM doping on the oxTAM provides a new insight for developing photocatalyst-based covalent organic frameworks (COFs) to remove emerging pollutants in wastewater.

MXenes vs. clays: emerging and traditional 2D layered nanoarchitectonics

Although MXene materials are considered an emerging research topic, they are receiving considerable interest because, like metals and graphene, they are good electronic conductors but with the particularity that they have a marked hydrophilic character. Having a structural organization and properties close to those of clay minerals (natural silicates typically with a lamellar morphology), they are sometimes referred to as "conducting clays" and exhibit colloidal, surface and intercalation properties also similar to those of clay minerals. The present contribution aims to inform and discuss the nature of MXenes in comparison with clay phyllosilicates, taking into account their structural analogies, outstanding surface properties and advanced applications. The current in-depth understanding of clay minerals may represent a basis for the future development of MXene-derived nanoarchitectures. Comparative examples of the preparation, and studies on the properties and applications of various nanoarchitectures based on clays and MXenes have been included in the present work.

Ti2NTx quasi-MXene modified polyamide thin film composite reverse osmosis membrane with effective desalination and antifouling performance

In this study, considering the serious problem of lack of fresh water worldwide and the effectiveness of reverse osmosis (RO) membranes in water purification, we prepared improved RO membranes with two-dimensional quasi-MXene nanosheets. In this study, the MAX phase with the chemical formula of Ti2AlN was prepared through the reactive sintering route. Prosperous preparation of the MAX phase with the hexagonal crystalline structure was approved by an X-ray diffraction pattern. Compacted sheets morphology was recognized for the prepared MAX phase from transmittance electron microscopy and scanning electron microscopy micrographs. Then, Ti2NTx quasi-MXene nanosheets were prepared by selective ultrasonic-assisted exfoliation of the MAX phase. Polyamide (PA) thin-layer composite RO membranes with different weight percentages of Ti2NTx quasi-MXene were fabricated by the interfacial polymerization (IP) method. The addition of ultrasonic-assisted prepared quasi-MXene creates numerous and coherent nanochannels on the surface of the membrane. The optimum membrane with 0.01 wt% of quasi-MXene showed the highest pure water flux of 31.9 L m-2. h-1 with an improved salt rejection of 98.2%. Therefore, these nanosheets showed that they can partially solve the trade-off between water permeability and salt rejection, which is a serious challenge in RO membranes. Also, the membranes containing quasi-MXene showed good resistance against fouling by humic acid. This research can be a scalable development in making high-performance membranes.

Degradation of enrofloxacin by a novel Fe-N-C@ZnO material in freshwater and seawater: Performance and mechanism

In this study, we investigated the doping of Fe-N-C with ZnO (Fe-N-C@ZnO) to enhance its performance in the reduction of biological toxicity and degradation of enrofloxacin (ENR) in seawater. The steady-state/transient fluorescence analysis and free radical quenching test indicated an extremely low electron-hole recombination rate and the generation of reactive oxygen species in Fe-N-C@ZnO, leading to an improvement in the energy efficiency. We compared the ENR degradation efficiencies of Fe-N-C@ZnO and ZnO using both freshwater and seawater. In freshwater, Fe-N-C@ZnO exhibited a slightly higher degradation efficiency (95.00%) than ZnO (90.30%). However, the performance of Fe-N-C@ZnO was significantly improved in seawater compared to that of ZnO. The ENR degradation efficiency of Fe-N-C@ZnO (58.87%) in seawater was 68.39% higher than that of ZnO (34.96%). Furthermore, the reaction rate constant for ENR degradation by Fe-N-C@ZnO in seawater (7.31 × 10-3 min-1) was more than twice that of ZnO (3.58 × 10-3 min-1). Response surface analysis showed that the optimal reaction conditions were a pH of 7.42, a photocatalyst amount of 1.26 g L-1, and an initial ENR concentration of 6.56 mg L-1. Fe-N-C@ZnO prepared at a hydrothermal temperature of 128 °C and heating temperature of 300 °C exhibited the optimal performance for the photocatalytic degradation of ENR. Based on liquid chromatography-mass spectrometry analysis, the degradation processes of ENR were proposed as three pathways: two piperazine routes and one quinolone route.

Integrating of electrocoagulation process with submerged membrane bioreactor for wastewater treatment under low voltage gradients

Treating and reusing wastewater has become an essential aspect of water management worldwide. However, the increase in emerging pollutants such as polycyclic aromatic hydrocarbons (PAHs), which are presented in wastewater from various sources like industry, roads, and household waste, makes their removal difficult due to their low concentration, stability, and ability to combine with other organic substances. Therefore, treating a low load of wastewater is an attractive option. The study aimed to address membrane fouling in the submerged membrane bioreactor (SMBR) used for wastewater treatment. An aluminum electrocoagulation (EC) device was combined with SMBR as a pre-treatment to reduce fouling. The EC-SMBR process was compared with a conventional SMBR without EC, fed with real grey water. To prevent impeding biological growth, low voltage gradients were utilized in the EC deviceThe comparison was conducted over 60 days with constant transmembrane pressure and infinite solid retention time (SRT). In phase I, when the EC device was operated at a low voltage gradient (0.64 V/cm), no significant improvement in the pollutants removal was observed in terms of color, turbidity, and chemical oxygen demand (COD). Nevertheless, during phase II, a voltage gradient of 1.26 V/cm achieved up to 100%, 99.7%, 92%, 94.1%, and 96.5% removals in the EC-SMBR process in comparison with 95.1%, 95.4%, 85%, 91.7% and 74.2% removals in the SMBR process for turbidity, color, COD, ammonia nitrogen (NH3-N), total phosphorus (TP), respectively. SMBR showed better anionic surfactant (AS) removal than EC-SMBR. A voltage gradient of 0.64 V/cm in the EC unit significantly reduced fouling by 23.7%, while 1.26 V/cm showed inconsistent results. Accumulation of Al ions negatively affected membrane performance. Low voltage gradients in EC can control SMBR fouling if Al concentration is controlled. Future research should investigate EC-SMBR with constant membrane flux for large-scale applications, considering energy consumption and operating costs.

A MXene-BiFeO3-ZnO nanocomposite photocatalyst served as a high-performance supercapacitor electrode

MXenes have attracted considerable attention in the field of energy storage and conversion due to their high surface area, excellent electrical conductivity, and ability to intercalate various ions. However, simultaneously achieving high capacitance, rate capability, cycling stability, and mechanical flexibility is a significant challenge for designing MXene-based supercapacitors. In this article, we explored MXene-BiFeO3-ZnO nanocomposites for both photocatalytic and electric double-layer supercapacitor applications. While the BiFeO3-ZnO nanohybrid heterostructure improves the charge separation properties in nanocomposite photocatalysts, it was applied as an interlayer spacer between the MXene layers to prevent the stacking effect of electrodes in the supercapacitor. Furthermore, the optimization of MXene content in the nanocomposite was established by photocatalytic studies on methylene blue dye, which revealed a maximum of 98.72% degradation under direct sunlight with superior stability. The electrochemical studies on the best composition material reveal a maximum areal capacitance (Ccv) of 142.8 mF cm-2, an energy density (E) of 1.65 μW h cm-2, and a capacitive retention of 99.98% after 8000 cycles at 7 μA cm-2. Additionally, the flexible solid-state supercapacitor fabricated with the same material demonstrates an areal capacitance of 47.6 mF cm-2 and a capacitive retention of 66% after 8000 cycles at 7 μA cm-2, with potential for high-performance flexible supercapacitors.