Synthesis of highly efficient novel two-step spatial 2D photocatalyst material WS2/ZnIn2S4 for degradation/reduction of various toxic pollutants

Nitrogen-Doped Hollow Carbon Spheres-Decorated Co2SnO4/WS2 Heterostructures with Improved Visible-Light Photocatalytic Degradation of Organic Dye

Advanced photocatalytic materials for environmental cleanup need to be developed in response to growing concerns about water pollution. This paper presents a novel N-doped hollow carbon spheres (NHCSs)-supported Co2SnO4/WS2 heterostructure synthesized using a hydrothermal approach and examined using various characterization techniques to evaluate the crystal structures, functional groups, surface morphology, chemical properties, and optical characteristics. The photocatalytic performance of the Co2SnO4/WS2@NHCSs composite was assessed by degrading Congo red (CR) under visible light, resulting in a notable degradation rate of 87.22% in 60 min. The enhanced degradation efficiency is ascribed to the Z-scheme heterojunction charge-transfer mechanism, which augments sustained charge separation while suppressing recombination under visible-light irradiation. Furthermore, the quenching experiments revealed that specific superoxide radicals (•O2-) and hydroxyl radicals (•OH) were integral to the degradation reaction, and a potential Z-scheme charge-transfer pathway mechanism for the effective Co2SnO4/WS2@NHCSs photocatalysts was also suggested. The potential degradation mechanism was suggested using LC-MS analysis. This study highlights the promise of Co2SnO4/WS2@NHCSs composites for practical wastewater treatment applications, providing a sustainable and effective solution for environmental remediation.

Z-Scheme Enabled 1D/2D Nanocomposite of ZnO Nanorods and Functionalized g-C3 N4 Nanosheets for Sustainable Degradation of Terephthalic Acid

The urgent need to mitigate water pollution and achieve Sustainable Development Goal 14 (SDG 14)-Life below water, necessitates developing efficient and eco-friendly wastewater treatment technologies. This research addresses this challenge by photocatalytic degradation of terephthalic acid, a precursor for PET bottles using environment-friendly and biocompatible photocatalysts. The 1D/2D nanocomposite comprising zinc oxide (ZnO) nanorods and functionalized graphitic carbon nitride (Zn-TG) nanosheets were synthesized and thoroughly characterized. The nanocomposite effectively mitigated the individual drawbacks of Zn-TG agglomeration and the wide band gap of ZnO as confirmed through zeta potential and Tauc's plot studies, respectively. The synthesized nanocomposite achieved ~100 % degradation within 60 minutes, exhibiting superior kinetics (~2.5 times) compared to pristine samples. The enhanced degradation efficiency was elucidated by efficient charge carrier transfer (~5 times faster) and separation (~2 times improved) as confirmed through electrochemical impedance spectroscopy and time-resolved photoluminescence studies. The proposed Z-scheme pathway provides mechanistic insights. This proposed mechanism is supported by extensive electron paramagnetic resonance (EPR) and scavenger studies. The liquid chromatography-mass spectrometry (LC-MS) analysis confirms the formation of less toxic byproducts for ensuring that the wastewater treatment process is efficient and environmentally friendly. This research helps in developing a highly effective and sustainable wastewater treatment technology.

Insights into the function of metallic 1T phase tungsten disulfide as cocatalyst decorated zinc indium sulfide for enhanced photocatalytic hydrogen production activity

Improving the separation efficiency of carriers is an important part of enhancing photocatalytic activity. Herein, we successfully decorated metallic 1T phase tungsten disulfide (1T-WS2) on the surface of zinc indium sulfide (ZnIn2S4) and investigated the synergistic effect of 1T-WS2 on ZnIn2S4. The characterization results show that 1T-WS2 improves the light absorption capacity and utilization efficiency, increases the catalytic active site, improves the photogenerated charge separation efficiency, and optimizes the reduction potential of ZnIn2S4. Theoretical calculations show that compared with ZnIn2S4, 1T-WS2/ZnIn2S4 has a smaller adsorption Gibbs free energy of the intermediate state H*, which is conducive to the catalytic reaction. Under simulated solar irradiation, the hydrogen (H2) production rate of 1T-WS2/ZnIn2S4 with a loading of 12 wt% reaches 30.90 mmol h-1 g-1, which is 3.38 times higher than that of single ZnIn2S4 (9.13 mmol h-1 g-1). In addition, the apparent quantum efficiency of 1T-WS2/ZnIn2S4 with a loading of 12 wt% reaches 21.14 % under monochromatic light at a wavelength of λ = 370 nm. This work analyzes the light absorption and carrier separation to the catalytic site, and elucidates the mechanism for the enhancement of the photocatalytic hydrogen production performance.

DFT and experimental studies of the facet-dependent oxygen vacancies modulated WS2/BiOCl-OV S-scheme structure for enhanced photocatalytic removal of ciprofloxacin from wastewater

The present study explores visible light-assisted photodegradation of ciprofloxacin hydrochloride (CIP) antibiotic as a promising solution to water pollution. The focus is on transforming the optical and electronic properties of BiOCl through the generation of oxygen vacancies (OVs) and the exposure of (110) facets, forming a robust S-scheme heterojunction with WS2. The resultant OVs mediated composite with an optimal ratio of WS2 and BiOCl-OV (4-WS2/BiOCl-OV) demonstrated remarkable efficiency (94.3%) in the visible light-assisted photodegradation of CIP antibiotic within 1.5 h. The CIP degradation using 4-WS2/BiOCl-OV followed pseudo-first-order kinetics with the rate constant of 0.023 min-1, outperforming bare WS2, BiOCl, and BiOCl-OV by 8, 6, and 4 times, respectively. Density functional theory (DFT) analysis aligned well with experimental results, providing insights into the structural arrangement and bandgap analysis of the photocatalysts. Liquid chromatography-mass spectrometry (LC-MS) analysis utilized for identifying potentially degraded products while scavenging experiments and electron paramagnetic resonance (EPR) spin trapping analysis elucidated the S-scheme charge transfer mechanism. This research contributes to advancing the design of oxygen vacancy-mediated S-scheme systems in the realm of photocatalysis, with potential implications for addressing water pollution concerns.

All-inorganic lead halide perovskites for photocatalysis: a review

Nowadays, environmental pollution and the energy crisis are two significant concerns in the world, and photocatalysis is seen as a key solution to these issues. All-inorganic lead halide perovskites have been extensively utilized in photocatalysis and have become one of the most promising materials in recent years. The superior performance of all-inorganic lead halide perovskites distinguish them from other photocatalysts. Since pure lead halide perovskites typically have shortcomings, such as low stability, poor active sites, and ineffective carrier extraction, that restrict their use in photocatalytic reactions, it is crucial to enhance their photocatalytic activity and stability. Huge progress has been made to deal with these critical issues to enhance the effects of all-inorganic lead halide perovskites as efficient photocatalysts in a wide range of applications. In this manuscript, the synthesis methods of all-inorganic lead halide perovskites are discussed, and promising strategies are proposed for superior photocatalytic performance. Moreover, the research progress of photocatalysis applications are summarized; finally, the issues of all-inorganic lead halide perovskite photocatalytic materials at the current state and future research directions are also analyzed and discussed. We hope that this manuscript will provide novel insights to researchers to further promote the research on photocatalysis based on all-inorganic lead halide perovskites.