Properties of d-allulose 3-epimerase mined from Novibacillus thermophilus and its application to synthesis of d-allulose

Computer-Aided Multidimensional Strategy To Improve the Thermostability of d-Allulose 3-Epimerase from Christensenellaceae Bacterium for the Production of d-Allulose

d-Allulose, a rare sugar with broad applications, is produced from d-fructose by d-allulose 3-epimerase (DAE). However, a high temperature is needed for producing d-allulose, and it is always a challenge to improve both the thermostability and catalytic efficiency of DAEs. In this study, a weakly acidophilic d-allulose 3-epimerase (CbDAE) from Christensenellaceae bacterium with good specific activity 223.5 U/mg was successfully characterized. Subsequently, a multidimensional computer-aided engineering/iterative saturation mutagenesis (MCAE/ISM) strategy was employed to improve the thermostability of CbDAE based on analysis of flexibility and secondary structure of the protein, as well as the calculation of free energy changes of folding (ΔΔGfold). Finally, the best variant M4 (A13S/V235I/D100N/I242V) exhibited a 2310.49 min half-life at 70 °C, a 19 °C increase in Tm, and a 2.84-fold higher activity. The conversion ratio could reach up to 38% with 200 g/L d-fructose, and even at high concentrations of 700 g/L, it could still reach 32%. When M4 was used in combination with glucose isomerase, the yield of 19.7% of d-allulose was achieved from d-glucose. Additionally, molecular dynamics simulations and structural analysis indicated that the improved thermostability and catalytic activity resulted from optimized protein conformations, redistributed surface charge networks, and enhanced inter-residue interactions. This study shows that variant M4 is a promising biocatalyst for the production of d-allulose.

Purification, immobilization, evolution, and characterization of D-allulose 3-epimerase from Antarctic Microbacterium

D-allulose is a rare, low-calorie sugar substitute with multiple physiological functions and is widely used in food and pharmaceutical industries. D-allulose is primarily produced by the catalytic conversion of d-fructose via D-allulose 3-epimerase (DAEase). In this study, a DAEase gene, dpema4, was isolated from an Antarctic bacterium and expressed in Escherichia coli. The recombinant DAEase was a homotetramer with an optimal temperature of 60 °C and pH of 7.5. Its catalytic activity was not strictly dependent on metal ions, making it a safer alternative to the other reported DAEases. The recombinant DAEase showed exhibited the highest activity towards D-allulose, and the bioconversion rate was 29 %. For immobilization, the cellulose-binding domain (CBD) was fused to DAEase, and the fusion protein was immobilized on microcrystalline cellulose. The immobilized DAEase showed highly improved pH stability and maintained approximately 44 % of catalytic activity after 10 continuous reaction cycles. The single-point mutant A248H showed high thermal stability and catalytic activity at 60 °C, and the bioconversion rate of d-fructose reached 32 %. In summary, the recombinant DAEase can serve as a good candidate enzyme for the production of D-allulose, and the establishment of a one-step purification and immobilization of DAEase can facilitate its industrial application.

Green biotechnological synthesis of rare sugars/alcohols: D-allulose, allitol, D-tagatose, L-xylulose, L-ribose

Rare sugars are paid more attention because of which have the characteristics of low calorie, low absorption and excellent physiological functions. Biotechnological synthesis of rare sugars has the advantages of being green, clean, simple and economic compared to chemical synthesis. Abundant enzymes for rare sugars biosynthesis are introduced and multienzyme cascade catalytic system (MECCS) used in biosynthesis of rare sugars is highlighted in this paper. Different biosynthesis pathways of five important rare sugars (D-allulose, allitol, D-tagatose, L-xylulose, l-ribose), mainly containing isomerization/epimerization reaction (existing thermodynamic equilibrium limitation), reduction-oxidation reaction (needing expensive cofactors) and phosphorylation-dephosphorylation reaction pathways (inherent constraint of thermodynamic equilibrium and requirement high-cost cofactors) etc., are reviewed. Furthermore, techniques of cofactor regeneration and enzyme/cell immobilization are provided. Finally, unique insights and expectations for future development in biosynthesis of rare sugars are given. This review provides a comprehensive analysis of the latest biotechnological advancements in the biosynthesis of rare sugars/alcohols, highlighting innovative multienzyme cascade catalytic systems and cofactor regeneration strategies.

D-allulose 3-epimerase for low-calorie D-allulose synthesis: microbial production, characterization, and applications

D-allulose, an epimer of D-fructose at C-3 position, is a low-calorie rare sugar with favorable physiochemical properties and special physiological functions, which displays promising perspectives in the food and pharmaceutical industries. Currently, D-allulose is extremely sparse in nature and is predominantly biosynthesized through the isomerization of D-fructose by D-allulose 3-epimerase (DAEase). In recent years, D-allulose 3-epimerase as the key biocatalyst for D-allulose production has received increasing interest. The current review begins by providing a summary of D-allulose regarding its characteristics and applications, as well as different synthesis pathways dominated by biotransformation. Then, the research advances of D-allulose 3-epimerase are systematically reviewed, focusing on heterologous expression and biochemical characterization, crystal structure and molecular modification, and application in D-allulose production. Concerning the constraint of low yield of DAEase for industrial application, this review addresses the various attempts made to promote the production of DAEase in different expression systems. Also, various strategies have been adopted to improve its thermotolerance and catalytic activity, which is mainly based on the structure-function relationship of DAEase. The application of DAEase in D-allulose biosynthesis from D-fructose or low-cost feedstocks through single- or multi-enzymatic cascade reaction has been discussed. Finally, the prospects for related research of D-allulose 3-epimerase are also proposed, facilitating the industrialization of DAEase and more efficient and economical bioproduction of D-allulose.

Advances in the bioproduction of d-allulose: A comprehensive review of current status and future prospects

As living standards rise, the overconsumption of sugary and calorific foods has led to a rise in obesity, diabetes, and other diseases. In response to the increasing demand for healthier diets, the food industry is actively seeking sugar alternatives. Among these alternatives, d-allulose as a functional sweetener has garnered significant attention for its low-calorie content, low glycemic index, and health benefits. This review summarizes recent advancements in d-allulose research, including its physiological functions, potential applications, and bioproduction methods. This review consolidates the known physiological functions of d-allulose and assesses its potential applications in the food and medical industries. Furthermore, the review explores recent progress in biotechnological production technologies, such as enzymatic conversion and microbial fermentation, which are key to producing d-allulose. d-Allulose is a standout natural sweetener with low calories and a low glycemic index, providing health benefits like lowering blood sugar and lipids, antioxidants, preventing obesity, and regulating metabolism. In the food industry, d-allulose is suitable for use in a variety of products, including baked goods, beverages, confectionery, and yogurt. The primary methods for its production are enzymatic conversion and microbial fermentation, both of which offer scalable and sustainable approaches. Recent research has advanced the production of d-allulose using low-cost raw materials, including agricultural and forestry waste, and even CO2, highlighting a move towards more sustainable production methods. With its diverse physiological functions and broad application prospects, d-allulose holds significant potential for growth in both the food and healthcare sectors.

Advances in the biosynthesis of D-allulose

D-allulose is a rare monosaccharide and a C-3 epimer of D-fructose. It has physiological functions, such as antihyperglycemic, obesity-preventing, neuroprotective, and reactive oxygen species (ROS) scavenging effects, making it an ideal sugar substitute. The synthesis methods for D-allulose include chemical synthesis and biosynthesis. Chemical synthesis requires strict reaction conditions and tends to produce byproducts. Biosynthesis is mainly an enzymatic process. Enzymatic catalysis for the conversion of starch or glycerol to D-allulose is performed mainly by enzymes such as isoamylase (IA), glucose isomerase (GI), D-allulose 3-epimerase (DPE), D-allulose-6-phosphate 3-epimerase (A6PE), D-allulose 6-phosphate phosphatase (A6PP), ribitol 2-dehydrogenase (RDH), glycerophosphate kinase (GK), glycerophosphate oxidase (GPO), and dihydroxyacetone phosphate (DHAP)-dependent aldolase. Biosynthesis is a more energy-efficient process, producing fewer harmful by-products and pollutants, and significantly reducing negative environmental impacts. Furthermore, the specific catalytic activity of enzymes facilitates the production of compounds of higher purity, thereby facilitating the isolation and purification of the products. It has thus become the main method for producing D-allulose. This article reviews the progress in research on the biosynthetic production of D-allulose, focusing on the enzymes involved and their enzymatic properties, and discusses the production prospects for D-allulose.

Comprehensive Analysis of Allulose Production: A Review and Update

Advancements in D-allulose production have seen significant strides in recent years, focusing on enzymatic conversion methods. Key developments include traditional immobilization techniques, the discovery of novel enzymes, directed evolution studies, and biosynthesis through metabolic pathway modification. Enzymatic conversion, particularly utilizing D-allulose 3-epimerase, remains fundamental for industrial-scale production. Innovative immobilization strategies, such as functionalized nano-beads and magnetic MOF nanoparticles, have significantly enhanced enzyme stability and reusability. Directed evolution has led to improved enzyme thermostability and catalytic efficiency, while synthetic biology methods, including phosphorylation-driven and thermodynamics-driven pathways, have optimized production processes. High-throughput screening methods have been crucial in identifying and refining enzyme variants for industrial applications. Collectively, these advancements not only enhance production efficiency and cost-effectiveness but also adhere to sustainable and economically viable manufacturing practices. The past five years have witnessed critical developments with significant potential impact on the commercial viability and global demand for allulose.

Simultaneous Enhancement of the Thermostability and Catalytic Activity of D-Allulose 3-Epimerase from Clostridium bolteae ATTC BAA-613 Based on the "Back to Consensus Mutations" Hypothesis

D-Allulose is a high value rare sugar with multiple physiological functions and commercial potential that can be enzymatically synthesized from D-fructose by D-allulose 3-epimerase (DAEase). Poor catalytic activity and thermostability of DAEase prevent the industrial production of D-allulose. In this work, rational design was applied to a previously identified DAEase from Clostridium bolteae ATCC BAA-613 based on the "back to consensus mutations" hypothesis, and the catalytic activity of the Cb-I265 V variant was enhanced 2.5-fold. Furthermore, the Cb-I265 V/E268D double-site variant displayed 2.0-fold higher specific catalytic activity and 1.4-fold higher thermostability than the wild-type enzyme. Molecular docking and kinetic simulation results indicated increased hydrogen bonds between the active pocket and substrate, possibly contributing to the improved thermal stability and catalytic activity of the double-site mutant. The findings outlined a feasible approach for the rational design of multiple preset functions of target enzymes simultaneously.

Bioproduction of Rare d-Allulose from d-Glucose via Borate-Assisted Isomerization

d-Allulose is a low-calorie functional rare sugar with excellent processing suitability and unique physiological efficacy. d-Allulose is primarily produced from d-fructose through enzymatic epimerization, facing the constraints of a low conversion yield and high production cost. In this study, a double-enzyme cascade system with tetraborate-assisted isomerization was constructed for the efficient production of d-allulose from inexpensive d-glucose. With the introduction of sodium tetraborate (STB), capable of forming complexes with diol-bearing sugars, the conversion yield of d-allulose from d-glucose substantially escalated from the initial 17.37% to 44.97%. Furthermore, d-allulose was found to exhibit the most pronounced binding affinity for STB with an association constant of 1980.51 M-1, notably surpassing that of d-fructose (183.31 M-1) and d-glucose (35.37 M-1). Additionally, the structural analysis of the sugar-STB complexes demonstrated that d-allulose reacted with STB via the cis 2,3-hydroxyl groups in the α-furanose form. Finally, the mechanism underlying STB-assisted isomerization was proposed, emphasizing the preferential formation of an allulose-STB complex that effectively shifts the isomerization equilibrium to the allulose side, thereby resulting in high yield of d-allulose. Such an STB-facilitated isomerization system would also provide a guidance for the cost-effective synthesis of other rare sugars.

Turning waste into treasure: Biosynthesis of value-added 2-O-α-glucosyl glycerol and d-allulose from waste cane molasses through an in vitro synthetic biology platform

The efficient and economical conversion of agricultural waste into glycosides and rare sugars is challenging. Herein, an in vitro synthetic bienzyme system consisting of sucrose phosphorylase and d-allulose 3-epimerase was constructed to produce 2-O-α-glucosyl glycerol and d-allulose from cane molasses. Lactic acid in the cane molasses significantly induced sucrose phosphorylase to hydrolyze sucrose instead of glycosylation. Notably, lactic acid significantly inhibited the catalytic performance of d-allulose 3-epimerase only in the presence of Na+ and K+, with an inhibition rate of 75%. After removing lactic acid and metal ions, 116 g/L 2-O-α-glucosyl glycerol and 51 g/L d-allulose were synthesized from 500 mM sucrose in the treated cane molasses with a sucrose consumption rate of 97%. Our findings offer an economically efficient and environmentally friendly pathway for the industrial production of glycosides and rare sugars from food industry waste.

Emerging natural and high-phenolic sweet substances: A review

Emerging high-phenolic sweeteners impart a sweet taste to foods and beverages, and are desirable sugar alternatives. Most refined sugars have a low antioxidant content due to polyphenol degradation occurring during sugar refining. Natural sweeteners such as honey, molasses, and dark brown sugar possess moderate to high phenolic content. Other phytochemicals found in natural sweeteners are carotenoids, organic acids, and terpenoids. Additionally, molasses and syrups synthesised from anthocyanin-rich fruits and roots contain anthocyanins apart from flavonoids. Non-nutritive sweeteners, such as sugar alcohols, are low in calories besides their sweet taste. Sweet proteins, dihydrochalcones, phenolics, and terpenoid derivatives are emerging sweeteners. These sweet substances are effective antioxidants that could help reduce oxidative stress in the human body although the amount ingested is usually low. The present review emphasised specific natural, high-phenolic, and other sweet compounds, and examined the antioxidative characteristics of these sweeteners. The risk of excessive ingestion of these sweet substances is yet to be proven.

The Characterization of a Novel D-allulose 3-Epimerase from Blautia produca and Its Application in D-allulose Production

D-allulose is a natural rare sugar with important physiological properties that is used in food, health care items, and even the pharmaceutical industry. In the current study, a novel D-allulose 3-epimerase gene (Bp-DAE) from the probiotic strain Blautia produca was discovered for the production and characterization of an enzyme known as Bp-DAE that can epimerize D-fructose into D-allulose. Bp-DAE was strictly dependent on metals (Mn²⁺ and Co²⁺), and the addition of 1 mM of Mn²⁺ could enhance the half-life of Bp-DAE at 55 °C from 60 to 180 min. It exhibited optimal activity in a pH of 8 and 55 °C, and the K_m values of Bp-DAE for the different substrates D-fructose and D-allulose were 235.7 and 150.7 mM, respectively. Bp-DAE was used for the transformation from 500 g/L D-fructose to 150 g/L D-allulose and exhibited a 30% of conversion yield during biotransformation. Furthermore, it was possible to employ the food-grade microbial species Bacillus subtilis for the production of D-allulose using a technique of whole-cell catalysis to circumvent the laborious process of enzyme purification and to obtain a more stable biocatalyst. This method also yields a 30% conversion yield.

Crystal structure of a novel homodimeric D-allulose 3-epimerase from a Clostridia bacterium

D-Allulose, a low-calorie rare sugar with various physiological functions, is mainly produced through the isomerization of D-fructose by ketose 3-epimerases (KEases), which exhibit various substrate specificities. A novel KEase from a Clostridia bacterium (CDAE) was identified to be a D-allulose 3-epimerase and was further characterized as thermostable and metal-dependent. In order to explore its structure–function relationship, the crystal structure of CDAE was determined using X-ray diffraction at 2.10 Å resolution, revealing a homodimeric D-allulose 3-epimerase structure with extensive interactions formed at the dimeric interface that contribute to structure stability. Structural analysis identified the structural features of CDAE, which displays a common (β/α)8-TIM barrel and an ordered Mn2+-binding architecture at the active center, which may explain the positive effects of Mn2+ on the activity and stability of CDAE. Furthermore, comparison of CDAE and other KEase structures revealed several structural differences, highlighting the remarkable differences in enzyme–substrate binding at the O4, O5 and O6 sites of the bound substrate, which are mainly induced by distinct hydrophobic pockets in the active center. The shape and hydrophobicity of this pocket appear to produce the differences in specificity and affinity for substrates among KEase family enzymes. Exploration of the crystal structure of CDAE provides a better understanding of its structure–function relationship, which might provide a basis for molecular modification of CDAE and further provides a reference for other KEases.

Expression and characterization of thermostable D-allulose 3-epimerase from Arthrobacter psychrolactophilus (Ap DAEase) with potential catalytic activity for bioconversion of D-allulose from d-fructose

A novel D-allulose 3-epimerase (DAEase) from Arthrobacter psychrolactophilus (Ap DAEase) was first characterized in this study. The enzyme catalyzes the epimerization of d-fructose into a functional rare sugar, D-allulose. Ap DAEase was the first record of DAEase identified as a homotrimer with the molecular weight of its subunit at approximately 34 kDa. It had an optimum activity at pH 8.5 and 70 °C in the presence of 1 mM Mg²⁺. Ap DAEase was found to be an excellent thermostable enzyme. The half-life value at 70 °C was 128.4 min. The k_cat and catalytic efficiency of the enzyme toward d-fructose were 2920.00 s^-1 and 3.953 mM^-1 s^-1, respectively. To the best of our knowledge, Ap DAEase possesses the highest k_cat among the previously reported DAEases. The conversion ratio of 500 and 100 mg L^-1d-fructose to D-allulose was approximately 27 % in 15 and 90 min, respectively. These research findings suggest that Ap DAEase is a promising candidate for the industrial production of D-allulose.

Engineering Novel (R)-Selective Transaminase for Efficient Symmetric Synthesis of d-Alanine

d-Alanine belongs to nonessential amino acids that have diverse applications in the fields of food and health care. (R)-transaminase [(R)-TA]-catalyzed asymmetric amination of pyruvate is a feasible alternative for the synthesis of d-alanine, but low catalytic efficiency and thermostability limit enzymatic utilization. In this work, several potential (R)-TAs were discovered using NCBI database mining synchronously with enzymatic structure-function analysis, among which Capronia epimyces TA (CeTA) showed the highest activity for amination of pyruvate using (R)-α-methylbenzylamine as the donor. Furthermore, enzymatic residues surrounding a large catalysis pocket were subjected to saturation and combinatorial mutagenesis, and positive mutant F113T showed dramatic improvement in activity and thermostability. Molecular modeling indicated that the substitution of phenylalanine with threonine afforded alleviation of steric hindrance in the pocket and induced formation of additional hydrogen bonds with neighboring residues. Finally, using recombinant cells containing F113T as a biocatalyst, the conversion yield of amination of 100 mM pyruvate to d-alanine achieved up to 95.2%, which seemed to be the highest level in the literature regarding synthesis of d-alanine using TAs. The inherent characteristics rendered CeTA F113T a promising platform for efficient preparation of d-alanine operating with high productivity. IMPORTANCE d-Alanine is an important compound with many valuable applications. Its asymmetric synthesis employing (R)-ω-TA is considered an attractive choice. According to the stereoselectivity, ω-TAs have either (R)- or (S)-enantiopreference. There has been a variety of literature regarding screening, characterizing, and molecular modification of (S)-ω-TAs; in contrast, the research about (R)-ω-TA has lagged behind. In this work, we identify several (R)-ω-TAs and succeeded in creating mutant F113T, which showed not only better efficiency toward pyruvate but also higher thermostability compared with the original enzyme. The obtained original enzymes and positive mutants displayed important application value for pushing symmetric synthesis of d-alanine to a higher level.

Characterization of D-Allulose-3-Epimerase From Ruminiclostridium papyrosolvens and Immobilization Within Metal-Organic Frameworks

D-allulose is one sort of C-3 epimer of D-fructose with the low calorie (0.4 kcal/g) and high sweetness (70% of the relative sweetness of sucrose), which can be biosynthesized by D-allulose-3-epimerase (DAE). In this work, we report the characterization of a novel DAE from Ruminiclostridium papyrosolvens (RpDAE) by genome mining approach. The activity of RpDAE reached maximum at pH 7.5 and 60°C, supplemented with 1 mM Co²⁺. Using D-fructose (500 g/L) as the substrate for epimerization reaction, RpDAE produced D-allulose (149.5 g/L). In addition, RpDAE was immobilized within the microporous zeolite imidazolate framework, ZIF67, by in situ encapsulation at room temperature. The synthesized bio-composites were characterized by powder X-ray diffraction and Fourier transform infrared spectroscopy. RpDAE-ZIF67 maintained 56% of residual activity after five reaction cycles. This study provides helpful guidance for further engineering applications and industrial production of D-allulose.

Computer-Aided Targeted Mutagenesis of Thermoclostridium caenicola d-Allulose 3-Epimerase for Improved Thermostability

d-Allulose 3-epimerase (DAEase) is a key enzyme in d-allulose bioproduction. DAEase from Thermoclostridium caenicola suffers from poor thermostability, hampering its large-scale applications in industry. In this study, mutants A70P, G107P, F155Y, and D162T with increased melting point temperature (T_m) were obtained by targeted mutagenesis based on the calculation of the free energy of folding. The optimal single-point mutant G107P showed 11.08 h, 5, and 5.70 °C increases in the values of half-life (t_1/2) at 60 °C, the optimum temperature (T_opt), and T_m, respectively. Beneficial mutations were combined by ordered recombination mutagenesis, and the combinational mutant Var3 (G107P/F155Y/D162T/A70P) was generated with ΔT_opt of 10 °C and ΔT_m of 12.25 °C. Its t_1/2 value at 65 °C was more than 140 times higher than that of the wild-type enzyme. Molecular dynamics simulations and homology modeling analysis indicated that the enhanced overall rigidity, increased hydrogen bonds between subunits, and redistributed surface electrostatic charges might be responsible for the improved thermostability of the mutant Var3.

D-allulose, a versatile rare sugar: recent biotechnological advances and challenges

D-Allulose is the C-3 epimer of D-fructose, and widely regarded as a promising substitute for sucrose. It's an excellent low-calorie sweetener, with 70% sweetness of sucrose, 0.4 kcal/g dietary energy, and special physiological functions. It has been approved as GRAS by the U.S. Food and Drug Administration, and is allowed to be excluded from total and added sugar counts on the food labels. Therefore, D-allulose gradually attracts more public attention. Owing to scarcity in nature, the bioproduction of D-allulose by using ketose 3-epimerase (KEase) has become the research hotspot. Herein, we give a summary of the physicochemical properties, physiological function, applications, and the chemical and biochemical synthesis methods of D-allulose. In addition, the recent progress in the D-allulose bioproduction using KEases, and the possible solutions for existing challenges in the D-allulose industrial production are comprehensively discussed, focusing on the molecular modification, immobilization, food-grade expression, utilizing low-cost biomass as feedstock, overcoming thermodynamic limitation, as well as the downstream separation and purification. Finally, Prospects for further development are also proposed.

Biochemical identification of a hyperthermostable l-ribulose 3-epimerase from Labedella endophytica and its application for d-allulose bioconversion

Currently, low sugar and low energy have become an important trend in the food industries. Therefore, the bioconversion of the functional low-calorie rare sugars attracts more and more attention. l-Ribulose 3-epimerase (LREase) belongs to the ketose 3-epimerase (KEase) family, which could not only efficiently catalyze the reversible C-3 epimerization between l-ribulose and l-xylulose but also between d-fructose and d-allulose. In this paper, a hyperthermostable LREase from Labedella endophytica was identified and characterized. It exhibited maximum catalytic activity at pH 6.0 and 80 °C with 1 mM Ni²⁺. In the presence of Co²⁺, the t_1/2 values at 60, 65, and 70 °C were 37.7, 9.0, and 4.6 h, respectively, and T_m value was 80.9 °C. From 500 g/L d-fructose, it could produce 154.2 g/L d-allulose with a conversion rate of 30.8% in 10 h. In view of its strong thermostability and high catalytic efficiency, L. endophytica LREase might be a good potential alternative for d-allulose industrial production.

Research Advances of d-allulose: An Overview of Physiological Functions, Enzymatic Biotransformation Technologies, and Production Processes

d-allulose has a significant application value as a sugar substitute, not only as a food ingredient and dietary supplement, but also with various physiological functions, such as improving insulin resistance, anti-obesity, and regulating glucolipid metabolism. Over the decades, the physiological functions of d-allulose and the corresponding mechanisms have been studied deeply, and this product has been applied to various foods to enhance food quality and prolong shelf life. In recent years, biotransformation technologies for the production of d-allulose using enzymatic approaches have gained more attention. However, there are few comprehensive reviews on this topic. This review focuses on the recent research advances of d-allulose, including (1) the physiological functions of d-allulose; (2) the major enzyme families used for the biotransformation of d-allulose and their microbial origins; (3) phylogenetic and structural characterization of d-allulose 3-epimerases, and the directed evolution methods for the enzymes; (4) heterologous expression of d-allulose ketose 3-epimerases and biotransformation techniques for d-allulose; and (5) production processes for biotransformation of d-allulose based on the characterized enzymes. Furthermore, the future trends on biosynthesis and applications of d-allulose in food and health industries are discussed and evaluated in this review.