Three-dimensional imaging of polymer materials by Scanning Probe Tomography

Atomic force microscopy nanoindentation kinetics and subsurface visualization of soft inhomogeneous polymer

Modern techniques of nanoindentation by atomic force microscopy (AFM) produce maps of topography and physical-mechanical properties of the material. Analysis of the interaction rate of the AFM tip with the soft surface reveals the surface and subsurface structure and expands standard analysis of the material behavior. Phase-separated polymer (polyurethane, elastic modulus-6 MPa) is studied. Reversible inelastic changes of the surface at different stages of indentation were established in dependence on peculiarities of velocity and position of the AFM-tip in the material: uniform soft nanofilm covering the outer surface gradually passes into fibrillar heterogeneous structure of the polymer. The point of stable mechanical contact is defined, and the elastic moduli of soft and hard blocks of the polymer are estimated using certain intervals of the indentation. The presented methods of surface analysis are useful in the study of a wide class of soft heterogeneous materials.

Subsurface imaging of rigid particles buried in a polymer matrix based on atomic force microscopy mechanical sensing

Several subsurface imaging methods based on atomic force microscopy (AFM) linear nanomechanical mapping, namely contact resonance (CR), bimodal and harmonic AFMs, are investigated and compared. Their respective subsurface detection capability is estimated and evaluated on a model specimen, which is prepared by embedding SiO₂ microparticles in a PDMS elastomer. The measured CR frequency, bimodal and harmonic amplitudes are related to local mechanical properties by analyzing cantilever dynamics and further linked to subsurface depths of the particles by finite element analysis. The maximum detectable depths are obtained from the apparent particle diameters in subsurface image channels via employing a simple geometrical model. Under common experimental settings, results demonstrate that the depth limits reach up to about 812 nm, 212 nm and 127 nm for CR, bimodal and harmonic AFM modes, respectively. The depth sensitivity can be tuned and optimized by using either different cantilever eigenmodes in CR-AFM or spectroscopy analysis in bimodal and harmonic AFMs. The three imaging methods have their own suitable application situations. The comparisons can advance a further step into understanding the subsurface image contrast via AFM mechanical sensing.

High resolution 3D microscopy study of cardiomyocytes on polymer scaffold nanofibers reveals formation of unusual sheathed structure

Building functional and robust scaffolds for engineered biological tissue requires a nanoscale mechanistic understanding of how cells use the scaffold for their growth and development. A vast majority of the scaffolds used for cardiac tissue engineering are based on polymer materials, the matrices of nanofibers. Attempts to load the polymer fibers of the scaffold with additional sophisticated features, such as electrical conductivity and controlled release of the growth factors or other biologically active molecules, as well as trying to match the mechanical features of the scaffold to those of the extracellular matrix, cannot be efficient without a detailed knowledge of how the cells are attached and strategically positioned with respect to the scaffold nanofibers at micro and nanolevel. Studying single cell - single fiber interactions with the aid of confocal laser scanning microscopy (CLSM), scanning probe nanotomography (SPNT), and transmission electron microscopy (TEM), we found that cardiac cells actively interact with substrate nanofibers, but in different ways. While cardiomyocytes often create a remarkable "sheath" structure, enveloping fiber and, thus, substantially increasing contact zone, fibroblasts interact with nanofibers in the locations of focal adhesion clusters mainly without wrapping the fiber.

STATEMENTS OF SIGNIFICANCE

We found that cardiomyocytes grown on electrospun polymer nanofibers often create a striking "sheath" structure, enveloping fiber with the formation of a very narrow (∼22 nm) membrane gap leading from the fiber to the extracellular space. This wrapping makes the entire fiber surface available for cell attachment. This finding gives a new prospective view on how scaffold nanofibers may interact with growing cells. It may play a significant role in effective design of novel nanofiber scaffolds for tissue engineering concerning mechanical and electrical properties of scaffolds as well as controlled drug release from "smart" biomaterials.

A novel design of a scanning probe microscope integrated with an ultramicrotome for serial block-face nanotomography

We present a new concept of a combined scanning probe microscope (SPM)/ultramicrotome apparatus. It enables "slice-and-view" scanning probe nanotomography measurements and 3D reconstruction of the bulk sample nanostructure from series of SPM images after consecutive ultrathin sections. The sample is fixed on a flat XYZ scanning piezostage mounted on the ultramicrotome arm. The SPM measuring head with a cantilever tip and a laser-photodiode tip detection system approaches the sample for SPM measurements of the block-face surface immediately after the ultramicrotome sectioning is performed. The SPM head is moved along guides that are also fixed on the ultramicrotome arm. Thereby, relative dysfunctional displacements of the tip, the sample, and the ultramicrotome knife are minimized. The design of the SPM head enables open frontal optical access to the sample block-face adapted for high-resolution optical lenses for correlative SPM/optical microscopy applications. The new system can be used in a wide range of applications for the study of 3D nanostructures of biological objects, biomaterials, polymer nanocomposites, and nanohybrid materials in various SPM and optical microscopy measuring modes.

Subsurface imaging of silicon nanowire circuits and iron oxide nanoparticles with sub-10 nm spatial resolution

Non-destructive subsurface characterization of nanoscale structures and devices is of significant interest in nanolithography and nanomanufacturing. In those areas, the accurate location of the buried structures and their nanomechanical properties are relevant for optimization of the nanofabrication process and the functionality of the system. Here we demonstrate the capabilities of bimodal and trimodal force microscopy for imaging silicon nanowire devices buried under an ultrathin polymer film. We resolve the morphology and periodicities of silicon nanowire pairs. We report a spatial resolution in the sub-10 nm range for nanostructures buried under a 70 nm thick polymer film. By using numerical simulations we explain the role of the excited modes in the subsurface imaging process. Independent of the bimodal or trimodal atomic force microscopy approach, the fundamental mode is the most suitable for tracking the topography while the higher modes modulate the interaction of the tip with the buried nanostructures and provide subsurface contrast.