Functional polylactide via ring-opening copolymerisation with allyl, benzyl and propargyl glycidyl ethers

Lychnopholide loaded in surface modified polylactide nanocapsules (LYC-PLA-PEG-NC) cure mice infected by Trypanosoma cruzi strain a prototype of resistance to benznidazole and nifurtimox: First insights of its mechanism of action

Chagas disease (CD) remains neglected and causes high morbidity and mortality. The great difficulty is the lack of effective treatment. The current drugs cause side effects and have limited therapeutic efficacy in the chronic phase. This study aims to fulfil some gaps in studies of the natural substance lychnopholide nanoencapsulated LYC-PLA-PEG-NC (LYC-NC) and free (Free-LYC): the activity in epimastigotes and amastigotes to determine its selectivity index (SI), the therapeutic efficacy in mice infected with Colombian Trypanosoma cruzi strain and insight of the mechanism of LYC-NC action on T. cruzi. The SI was obtained by calculation of the ratio between the IC50 value toward H9c2 cells divided by the IC50 value in the anti-T. cruzi test. Infected Swiss mice were treated with 2 and 12 mg/kg/day via intravenous and oral, respectively, and the therapeutic efficacy was determined. The IC50 of LYC-NC and Free-LYC for epimastigotes of T. cruzi were similar. Both were active against amastigotes in cell culture, particularly Free-LYC. The SI of LYC-NC and Free-LYC were 45.38 and 32.11, respectively. LYC-NC 2 and 12 mg/kg/day cured parasitologically, 62.5% and 80% of the animals, respectively, infected with a strain resistant to treatment. The fluorescent NC was distributed in the cardiomyocyte cytoplasm, infected or not, and interacted with the trypomastigotes. Together, these results represent advances in demonstrating LYC as a potent new therapeutic option for treating CD.

Synthesis and Characterization of Functionalized Polylactides Containing Acetal Units

New functionalized lactide copolymers containing acetal units were prepared for the first time in a controlled manner that enabled the regulation of the number of reactive groups introduced into the polyester chain. The presence of functional groups in the copolymer backbone provided chemical modification sites, and the nature of the acetal unit affected the material degradability. First, paraformaldehyde was reacted with selected diols containing reactive pendant groups (3-allyloxypropane-1,2-diol and 3-chloropropane-1,2-diol), which was catalyzed by p-toluenesulfonic acid, to synthesize new cyclic acetals with different functionalities (allyl- or chloro-). In addition, using butane-1,4-diol, a nonfunctionalized seven-membered cyclic acetal (dioxepane) was obtained for comparative studies. In the next step, the prepared cyclic acetals were used for cationic copolymerization with lactide in the presence of glycol as an initiator and triflic acid as a catalyst. Different temperatures (-15, 2, and 30 °C) and copolymerization times (24, 48, 72, and 192 h) were investigated to produce copolyesters with variable contents of acetal units in the range of 5-27%. The copolymers' structure and molar masses were carefully investigated using 1H, 13C NMR, 2D NMR, and size-exclusion chromatography. Moreover, the ability of functionalized copolymers to perform post modifications was also proven by the reaction with sodium azide and propanethiol. Finally, we speculate that structurally diverse groups can be attached to the copolyester chain, fine-tuning the on-demand properties, which could rapidly expand the library of polylactide-based materials.

PEGylated and functionalized polylactide-based nanocapsules: An overview

Polymeric nanocapsules (NC) are versatile mixed vesicular nanocarriers, generally containing a lipid core with a polymeric wall. They have been first developed over four decades ago with outstanding applicability in the cosmetic and pharmaceutical fields. Biodegradable polyesters are frequently used in nanocapsule preparation and among them, polylactic acid (PLA) derivatives and copolymers, such as PLGA and amphiphilic block copolymers, are widely used and considered safe for different administration routes. PLA functionalization strategies have been developed to obtain more versatile polymers and to allow the conjugation with bioactive ligands for cell-targeted NC. This review intends to provide steps in the evolution of NC since its first report and the recent literature on PLA-based NC applications. PLA-based polymer synthesis and surface modifications are included, as well as the use of NC as a novel tool for combined treatment, diagnostics, and imaging in one delivery system. Furthermore, the use of NC to carry therapeutic and/or imaging agents for different diseases, mainly cancer, inflammation, and infections is presented and reviewed. Constraints that impair translation to the clinic are discussed to provide safe and reproducible PLA-based nanocapsules on the market. We reviewed the entire period in the literature where the term "nanocapsules" appears for the first time until the present day, selecting original scientific publications and the most relevant patent literature related to PLA-based NC. We presented to readers a historical overview of these Sui generis nanostructures.

Polyester Nanocapsules for Intravenous Delivery of Artemether: Formulation Development, Antimalarial Efficacy, and Cardioprotective Effects In Vivo

Artemether (ATM) is an effective antimalarial drug that also has a short half-life in the blood. Furthermore, ATM is also cardiotoxic and is associated with pro-arrhythmogenic risks. We aimed to develop a delivery system enabling the prolonged release of ATM into the blood coupled with reduced cardiotoxicity. To achieve this, we prepared polymeric nanocapsules (NCs) from different biodegradable polyesters, namely poly(D,L-lactide) (PLA), poly-ε-caprolactone (PCL), and surface-modified NCs, using a monomethoxi-polyethylene glycol-block-poly(D,L-lactide) (PEG5kDa-PLA45kDa) polymer. Using this approach, we were able to encapsulate high yields of ATM (>85%, 0−4 mg/mL) within the oily core of the NCs. The PCL-NCs exhibited the highest percentage of ATM loading as well as a slow release rate. Atomic force microscopy showed nanometric and spherical particles with a narrow size dispersion. We used the PCL NCs loaded with ATM for biological evaluation following IV administration. As with free-ATM, the ATM-PCL-NCs formulation exhibited potent antimalarial efficacy using either the “Four-day test” protocol (ATM total at the end of the 4 daily doses: 40 and 80 mg/kg) in Swiss mice infected with P. berghei or a single low dose (20 mg/kg) of ATM in mice with higher parasitemia (15%). In healthy rats, IV administration of single doses of free-ATM (40 or 80 mg/kg) prolonged cardiac QT and QTc intervals and induced both bradycardia and hypotension. Repeated IV administration of free-ATM (four IV doses at 20 mg/kg every 12 h for 48 h) also prolonged the QT and QTc intervals but, paradoxically, induced tachycardia and hypertension. Remarkably, the incorporation of ATM in ATM-PCL-NCs reduced all adverse effects. In conclusion, the encapsulation of ATM in biodegradable polyester NCs reduces its cardiovascular toxicity without affecting its antimalarial efficacy.

In vitro interaction of polyethylene glycol-block-poly(D,L-lactide) nanocapsule devices with host cardiomyoblasts and Trypanosoma cruzi-infective forms

Chagas disease, caused by the protozoan Trypanosoma cruzi, is an important public health problem in Latin America. Nanoencapsulation of anti-T. cruzi drugs has significantly improved their efficacy and reduced cardiotoxicity. Thus, we investigated the in vitro interaction of polyethylene glycol-block-poly(D,L-lactide) nanocapsules (PEG-PLA) with trypomastigotes and with intracellular amastigotes of the Y strain in cardiomyoblasts, which are the infective forms of T. cruzi, using fluorescence and confocal microscopy. Fluorescently labeled nanocapsules (NCs) were internalized by non-infected H9c2 cells toward the perinuclear region. The NCs did not induce significant cytotoxicity in the H9c2 cells, even at the highest concentrations and interacted equally with infected and non-infected cells. In infected cardiomyocytes, NCs were distributed in the cytoplasm and located near intracellular amastigote forms. PEG-PLA NCs and trypomastigote form interactions also occurred. Altogether, this study contributes to the development of engineered polymeric nanocarriers as a platform to encapsulate drugs and to improve their uptake by different intra- and extracellular forms of T. cruzi, paving the way to find new therapeutic strategies to fight the causative agent of Chagas disease.

Poly(Lactic Acid)-Based Graft Copolymers: Syntheses Strategies and Improvement of Properties for Biomedical and Environmentally Friendly Applications: A Review

As a potential replacement for petroleum-based plastics, biodegradable bio-based polymers such as poly(lactic acid) (PLA) have received much attention in recent years. PLA is a biodegradable polymer with major applications in packaging and medicine. Unfortunately, PLA is less flexible and has less impact resistance than petroleum-based plastics. To improve the mechanical properties of PLA, PLA-based blends are very often used, but the outcome does not meet expectations because of the non-compatibility of the polymer blends. From a chemical point of view, the use of graft copolymers as a compatibilizer with a PLA backbone bearing side chains is an interesting option for improving the compatibility of these blends, which remains challenging. This review article reports on the various graft copolymers based on a PLA backbone and their syntheses following two chemical strategies: the synthesis and polymerization of modified lactide or direct chemical post-polymerization modification of PLA. The main applications of these PLA graft copolymers in the environmental and biomedical fields are presented.

Significance of Polymers with “Allyl” Functionality in Biomedicine: An Emerging Class of Functional Polymers

In recent years, polymer-based advanced drug delivery and tissue engineering have grown and expanded steadily. At present, most of the polymeric research has focused on improving existing polymers or developing new biomaterials with tunable properties. Polymers with free functional groups offer the diverse characteristics needed for optimal tissue regeneration and controlled drug delivery. Allyl-terminated polymers, characterized by the presence of a double bond, are a unique class of polymers. These polymers allow the insertion of a broad diversity of architectures and functionalities via different chemical reactions. In this review article, we shed light on various synthesis methodologies utilized for generating allyl-terminated polymers, macromonomers, and polymer precursors, as well as their post-synthesis modifications. In addition, the biomedical applications of these polymers reported in the literature, such as targeted and controlled drug delivery, improvement i aqueous solubility and stability of drugs, tissue engineering, and antimicrobial coatings, are summarized.

Main-chain/Side-chain type Phosphine Oxide-Containing Reactive Polymers Derived from same Monomer: Controllable RAFT Polymerisation and ring-opening Polycondensation

This paper reports the synthesis and selective polymerisations of an epoxy-rich phosphine oxide-containing styrenic monomer, namely 4-vinylbenzyl-bis((oxiran-2-ylmethoxy)methyl) phosphine oxide (VBzBOPO). The styryl and epoxy functionalities could be polymerized independently through...

Photodynamic therapy with the dual-mode association of IR780 to PEG-PLA nanocapsules and the effects on human breast cancer cells

IR780 is a near-infrared fluorescent dye, which can be applied as a photosensitizer in photodynamic (PDT) and photothermal (PTT) therapies and as a biodistribution tracer in imaging techniques. We investigated the growth and migration inhibition and mechanism of death of breast tumor cells, MCF-7 and MDA-MB-231, exposed to polymeric nanocapsules (NC) comprising IR780 covalently linked to the biodegradable polymer PLA (IR-PLA) and IR780 physically encapsulated (IR780-NC) in vitro. Both types of NC had mean diameters around 120 nm and zeta potentials around -40 mV. IR-PLA-NC was less cytotoxic than IR780 NC to a non-tumorigenic mammary epithelial cell line, MCF-10A, which is an important aspect of selectivity. Free-IR780 was more cytotoxic than IR-PLA-NC for MCF-7 and MDA-MB-231 cells after illumination with a 808 nm laser. IR-PLA NC was effective to inhibit colony formation (50%) and migration (30-40%) for both cancer cell lines. MDA-MB-231 cells were less sensitive to all IR780 formulations compared to MCF-7 cells. Cell uptake was higher with IR-PLA-NC than with IR780-NC and free-IR780 in both cancer cell lines (p < 0.05). NC uptake was higher in MCF-7 than in MDA-MB-231 cells. IR-PLA-NC induced a higher percentage of apoptosis upon illumination in MDA-MB-231 than in MCF-7 cells. The necrosis mechanism of death predominated in treatments with free-IR780 and with encapsulated IR780 NC, suggestive of damages at the plasma membrane. IR780 conjugated with PLA increased the apoptotic pathway and demonstrated potential as a multifunctional theranostic agent for breast cancer treatment with increased cellular uptake, photodynamic activity and more reliable tracking in cell-image studies.

Repositioning of Tamoxifen in Surface-Modified Nanocapsules as a Promising Oral Treatment for Visceral Leishmaniasis

Standards of care for human visceral leishmaniasis (VL) are based on drugs used parenterally, and oral treatment options are urgently needed. In the present study, a repurposing strategy was used associating tamoxifen (TMX) with polyethylene glycol-block-polylactide nanocapsules (NC) and its anti-leishmanial efficacy was reported in vivo. Stable surface modified-NC (5 mg/mL of TMX) exhibited 200 nm in size, +42 mV of zeta potential, and 98% encapsulation efficiency. Atomic force microscopy evidenced core-shell-NC. Treatment with TMX-NC reduced parasite-DNA quantified in liver and spleen compared to free-TMX; and provided a similar reduction of parasite burden compared with meglumine antimoniate in mice and hamster models. Image-guided biodistribution showed accumulation of NC in liver and spleen after 30 min post-administration. TMX-NC reduced the number of liver granulomas and restored the aspect of capsules and trabeculae in the spleen of infected animals. TMX-NC was tested for the first time against VL models, indicating a promising formulation for oral treatment.

Release, transfer and partition of fluorescent dyes from polymeric nanocarriers to serum proteins monitored by asymmetric flow field-flow fractionation

Fluorescent probes are used in drug nanocarrier pre-clinical studies or as active compounds in theranostics and photodynamic therapy. In the biological medium, nanoparticles interact with proteins, which can result in the off-target release of their cargo. The present study used asymmetric flow field-flow fractionation with online multi-angle laser light scattering and fluorescence detection (AF4-MALLS-FLD) to study the release, transfer, and partition of fluorescent dyes from polymeric nanoparticles (NP). NP formulations containing the dyes Rose Bengal, Rhodamine B, DiI, 3-(α-azidoacetyl)coumarin and its polymer conjugate, Nile Red, and IR780 and its polymer conjugate were prepared. NP suspensions were incubated in a medium with serum proteins and then analyzed by AF4. AF4 allowed efficient separation of proteins (< 10 nm) from fluorescently labeled NP (range of 54 - 180 nm in diameters). The AF4 analyses showed that some dyes, such as Rose Bengal, IR780, and Coumarin were transferred to a high extent (68-77%) from NP to proteins. By contrast, for DiI and dye-polymer conjugates, transfer occured to a lower extent. The studies of dye release kinetics showed that the transfer of IR780 from NP to proteins occurs at a high extent (~50%) and rate, while Nile Red was slowly released from the NP over time with reduced association with proteins (~20%). This experiment assesses the stability of fluorescence labeling of nanocarriers and probes the transfer of fluorescent dyes from NP to proteins, which is otherwise not accessible with commonly used techniques of separation, such as dialysis and ultrafiltration/centrifugation employed in drug encapsulation and release studies of nanocarriers. Determining the interaction and transfer of dyes to proteins is of utmost importance in the pre-clinical evaluation of drug nanocarriers for improved correlation between in vitro and in vivo studies.

Lipid-based nanocarriers co-loaded with artemether and triglycerides of docosahexaenoic acid: Effects on human breast cancer cells

Artemether (ART) was combined with triglyceride of docosahexaenoic acid (DHA) as the lipid-core in nanoemulsions (NE), nanostructured lipid carriers (NLC), and PEG-PLA nanocapsules (NC) formulations, and their effects on human breast cancer cells were evaluated. ART has been extensively used for malaria and has also therapeutic potential against different tumor cells in a repositioning strategy. The concentration-dependent cytotoxicity in vitro was determined in tumor lineages, MDA-MB-231 and MCF-7, and non-tumor MCF-10A cells for free-ART/DHA combination and its formulations. The cells were monitored for viability, effects on cell migration and clonogenicity, cell death mechanism, and qualitative and quantitative cell uptake of nanocarriers. The lipid-nanocarriers showed mean sizes over the range of 110 and 280 nm with monodisperse populations and zeta potential values ranging from -21 to -67 mV. The ART encapsulation efficiencies varied from 57 to 83 %. ART/DHA co-loaded in three different lipid nanocarriers reduced the MDA-MB-231 and MCF-7 viability in a dose-dependent manner with enhanced selectivity toward tumor cell lines. They also reduced clonogenicity and the ability of cells to migrate showing antimetastatic potential in both cell lines and triggered apoptosis in MCF-7 cells. Confocal microscopy and flow cytometry analysis showed that NC, NLC, and NE were rapidly internalized by cells, with higher interaction displayed by NE with MCF-7 cells compared to NC and NLC that was correlated with the strongest NE-fluorescence in cells. Therefore, this study not only demonstrated the value of this new combination of ART/DHA as a new strategy for breast cancer therapy but also showed enhanced cytotoxicity and potential metastatic activity of lipid-based formulations against human breast cancer cells that indicate great potential for pre-clinical and clinical translation.

PLA-PEG nanospheres decorated with phage display selected peptides as biomarkers for detection of human colorectal adenocarcinoma

Peptide-mediated targeting to colorectal cancer can increase selectivity and specificity of this cancer diagnosis acting as biomarkers. The present work aimed to select peptides using the phage display technique and associate the peptides with polymeric nanospheres in order to evaluate their cytotoxicity and selectivity during cell interaction with Caco-2 human colon tumor cell line. Two peptides identified by phage display (peptide-1 and peptide-2) were synthesized and exhibited purity higher than 84%. Poly(lactic acid)-block-polyethylene glycol nanospheres were prepared by nanoprecipitation and double emulsion methods in order to load the two peptides. Nanoparticles ranged in size from 114 to 150 nm and peptide encapsulation efficiency varied from 16 to 32%, depending on the methodology. No cytotoxic activity was observed towards Caco-2 tumor cell line, either free or loaded peptides in concentrations up to 3 μM at incubation times of 6 and 24 h, indicating safety as biomarkers. Fluorescein isothiocyanate-labeled peptides allowed evaluating selective interactions with Caco-2 cells, where peptide-1 entrapped in nanospheres showed greater intensity of co-localized cell fluorescence, in comparison to peptide-2. Peptide-1 loaded in nanospheres revealed promising to be investigated in further studies of selectivity with other human colon rectal cells as a potential biomarker.Graphical abstract.

Synthesis of alkynyl-functionalized linear and star polyethers by aluminium-catalyzed copolymerization of glycidyl 3-butynyl ether with epichlorohydrin and ethylene oxide

A novel family of alkynyl-functional linear and star polyethers were prepared by the copolymerization of glycidyl 3-butynyl ether, ethylene oxide and epichlorohydrin catalyzed by i-Bu₃Al/H₃PO₄/DBU.

Phthalocyanine photosensitizer in polyethylene glycol-block-poly(lactide-co-benzyl glycidyl ether) nanocarriers: Probing the contribution of aromatic donor-acceptor interactions in polymeric nanospheres

For best photosensitizer activity phthalocyanine dyes used in photodynamic therapy should be molecularly dispersed. Polyethylene glycol-block-polylactide derivatives presenting benzyl side-groups were synthesized to encapsulate a highly lipophilic phthalocyanine dye (AlClPc) and evaluate the effect of π-π interactions on the nanocarrier colloidal stability and dye dispersion. Copolymers with 0, 1, 2 and 6 mol% of benzyl glycidyl ether (BGE) were obtained via polyethylene glycol initiated ring-opening copolymerization of D,l-lactide with BGE. The block copolymers formed stable, monodisperse nanospheres with low in vitro cytotoxicity. AlClPc loading increased the nanosphere size and affected their colloidal stability. The photo-physical properties of the encapsulated dye, studied in batch and after separation by field flow fractionation, demonstrated the superiority of plain PEG-PLA over BGE-containing copolymers in maintaining the dye in its monomeric (non-aggregated) form in aqueous suspension. High dye encapsulation and sustained dye release suggest that these nanocarriers are good candidates for photodynamic therapy.