Crystallization of star-shaped and linear poly(l-lactide)s

Electrically conductive crystalline polylactide nonwovens obtained by electrospinning and modification with multiwall carbon nanotubes

Polylactide nonwovens were electrospun from solutions and then crystallized, one in the α-form, and another, S-PLA made of poly(l-lactide) and poly(d-lactide) 1:1 blend, in scPLA crystals with high melting temperature, close to 220 °C. To make the nonwovens electrically conductive, they were coated with multiwall carbon nanotubes (MWCNT) by padding with an aqueous dispersion of MWCNT or dip-coating in this dispersion. The electrical conductivity evidenced the formation of the electrically conductive MWCNT network on the fiber surfaces. Depending on the coating method, the surface resistivity (R_s) of S-PLA nonwoven of 1.0 kΩ/sq. and 0.09 kΩ/sq. was reached. To study the effect of surface roughness, before the modification the nonwovens were etched with sodium hydroxide, which additionally made them hydrophilic. The effect of etching depended on the coating method and led to an increase or decrease of R_s, in the case of padding or dip-coating, respectively. All MWCNT-modified nonwovens, unetched and etched, were hydrophobic with water contact angles of 138-144°. Scanning electron microscopy corroborated the presence of MWCNT on the fiber surfaces. The impedance spectroscopy confirmed the dominant role of the network of MWCNT direct contacts on the electrical properties of MWCNT-modified nonwovens in a broad frequency range.

Recent progress of preparation of branched poly(lactic acid) and its application in the modification of polylactic acid materials

Poly (lactic acid) (PLA) with branched structure has abundant terminal groups, high melt strength, good rheological properties, and excellent processability; it is a new research and application direction of PLA materials. This study mainly summarizes the molecular structure design, preparation methods, basic properties of branched PLA, and its application in modified PLA materials. The structure and properties of branched PLA prepared by ring-opening polymerization of monomer, functional group polycondensation, and chain extender in the processing process were introduced. The research progress of in situ formation of branched PLA by initiators, multifunctional monomers/additives through dynamic vulcanization, and irradiation induction was described. The effect of branched PLA on the structure and properties of linear PLA materials was analyzed. The role of branched PLA in improving the crystallization behavior, phase morphology, foaming properties, and mechanical properties of linear PLA materials was discussed. At the same time, its research progress in biomedicine and tissue engineering was analyzed. Branched PLA has excellent compatibility with PLA, which has important research value in regulating the structure and properties of PLA materials.

Shear-Induced Crystallization of Star and Linear Poly(L-lactide)s

The influence of macromolecular architecture on shear-induced crystallization of poly(L-lactide) (PLLA) was studied. To this aim, three star PLLAs, 6-arm with Mw of 120 and 245 kg/mol, 4-arm with Mw of 123 kg/mol, and three linear PLLAs with Mw of 121, 240 and 339 kg/mol, were synthesized and examined. The PLLAs were sheared at 170 and 150 °C, at 5/s, 10/s and 20/s for 20 s, 10 s and 5 s, respectively, and then cooled at 10 or 30 °C/min. Shear-induced crystallization during cooling was followed by a light depolarization method, whereas the crystallized specimens were examined by DSC, 2D-WAXS, 2D-SAXS and SEM. The effect of shear depended on the shearing conditions, cooling rate and polymer molar mass but it was also affected by the macromolecular architecture. The shear-induced crystallization of linear PLLA with Mw of 240 kg/mol was more intense than that of the 6-arm polymer with similar Mw, most possibly due to its higher Mz. However, the influence of shear on the crystallization of the star polymers with Mw close to 120 kg/mol was stronger than on that of their linear analog. This was reflected in higher crystallization temperature, as well as crystallinity achieved during cooling.