Recent advances on pyrene-based photoinitiators of polymerization

β-meso-Fused pyrene-porphyrin scaffolds with panchromatic absorption features

The π-extension of porphyrins with pyrenes through the β-meso-fusion of five-membered rings is demonstrated. Three architectures resulting from combining up to two porphyrins and pyrenes were obtained straightforwardly in good overall yields. Although significantly planarized, the molecules retain excellent solubility and processability. Spectroscopic characterization and density-functional theory calculations reveal intriguing absorption features.

Acridone Derivatives for Near-UV Radical Polymerization: One-Component Type II vs. Multicomponent Behaviors

In this work, two novel acridone-based photoinitiators were designed and synthesized for the free radical polymerization of acrylates with a light-emitting diode emitting at 405 nm. These acridone derivatives were employed as mono-component Type II photoinitiators and as multicomponent photoinitiating systems in the presence of an iodonium salt or an amine synergist (EDB) in which they achieved excellent polymerization initiating abilities and high final conversions of the acrylate group. Photoinitiation mechanisms through which reactive species are produced were investigated employing different complementary techniques including steady-state photolysis, steady-state fluorescence, cyclic voltammetry, UV-visible absorption spectroscopy, and electron spin resonance spectroscopy. Finally, these molecules were also used in the direct laser writing process for the fabrication of 3D objects.

Synthesis, Photophysical and Electronic Properties of a D-π-A Julolidine-Like Pyrenyl-o-Carborane

We synthesized 2-(1-1,2-dicarbadodecaboranyl(12))-6,6,12,12-tetramethyl-7,8,11,12-tetrahydro-6H,10H-phenaleno[1,9-fg]pyrido[3,2,1-ij]quinoline (4), a julolidine-like pyrenyl-o-carborane, with pyrene substituted at the 2,7-positions on the HOMO/LUMO nodal plane. Using solid state molecular structures, photophysical data, cyclic voltammetry, DFT and LR-TDDFT calculations, we compare o-carborane and B(Mes)2 (Mes=2,4,6-Me3C6H2) as acceptor groups. Whereas the π-acceptor strength of B(Mes)2 is sufficient to drop the pyrene LUMO+1 below the LUMO, the carborane does not do this. We confirm the π-donor strength of the julolidine-like moiety, however, which raises the pyrene HOMO-1 above the HOMO. In contrast to the analogous pyrene-2-yl-o-carborane, 2-(1-1,2-dicarbadodecaboranyl(12))-pyrene VI, which exhibits dual fluorescence, because the rate of internal conversion between locally-excited (LE) and charge transfer (CT) (from the pyrene to the carborane) states is faster than the radiative decay rate, leading to a thermodynamic equilibrium between the 2 states, 4 shows only single fluorescence, as the CT state involving the carborane as the acceptor moiety in not kinetically accessible, so a more localized CT emission involving the julolidine-like pyrene moiety is observed.

Fast Visible-Light 3D Printing of Conductive PEDOT:PSS Hydrogels

Functional inks for light-based 3D printing are actively being searched for being able to exploit all the potentialities of additive manufacturing. Herein, a fast visible-light photopolymerization process is showed of conductive PEDOT:PSS hydrogels. For this purpose, a new Type II photoinitiator system (PIS) based on riboflavin (Rf), triethanolamine (TEA), and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is investigated for the visible light photopolymerization of acrylic monomers. PEDOT:PSS has a dual role by accelerating the photoinitiation process and providing conductivity to the obtained hydrogels. Using this PIS, full monomer conversion is achieved in less than 2 min using visible light. First, the PIS mechanism is studied, proposing that electron transfer between the triplet excited state of the dye (3 Rf*) and the amine (TEA) is catalyzed by PEDOT:PSS. Second, a series of poly(2-hydroxyethyl acrylate)/PEDOT:PSS hydrogels with different compositions are obtained by photopolymerization. The presence of PEDOT:PSS negatively influences the swelling properties of hydrogels, but significantly increases its mechanical modulus and electrical properties. The new PIS is also tested for 3D printing in a commercially available Digital Light Processing (DLP) 3D printer (405 nm wavelength), obtaining high resolution and 500 µm hole size conductive scaffolds.

Recent Advances in Monocomponent Visible Light Photoinitiating Systems Based on Sulfonium Salts

During the last decades, multicomponent photoinitiating systems have been the focus of intense research efforts, especially for the design of visible light photoinitiating systems. Although highly reactive three-component and even four-component photoinitiating systems have been designed, the complexity to elaborate such mixtures has incited researchers to design monocomponent Type II photoinitiators. Using this approach, the photosensitizer and the radical/cation generator can be combined within a unique molecule, greatly simplifying the elaboration of the photocurable resins. In this field, sulfonium salts are remarkable photoinitiators but these structures lack absorption in the visible range. Over the years, various structural modifications have been carried out in order to redshift their absorptions in the visible region. In this work, an overview of the different sulfonium salts activable under visible light and reported to date is proposed.

Exploring the Synergies of Single-Molecule Fluorescence and 2D Materials Coupled by DNA

The world of 2D materials is steadily growing, with numerous researchers attempting to discover, elucidate, and exploit their properties. Approaches relying on the detection of single fluorescent molecules offer a set of advantages, for instance, high sensitivity and specificity, that allow the drawing of conclusions with unprecedented precision. Herein, it is argued how the study of 2D materials benefits from fluorescence-based single-molecule modalities, and vice versa. A special focus is placed on DNA, serving as a versatile adaptor when anchoring single dye molecules to 2D materials. The existing literature on the fruitful combination of the two fields is reviewed, and an outlook on the additional synergies that can be created between them provided.

Recent Advances on Furan-Based Visible Light Photoinitiators of Polymerization

Photopolymerization is an active research field enabling to polymerize in greener conditions than that performed with traditional thermal polymerization. At present, a great deal of effort is devoted to developing visible light photoinitiating systems. Indeed, the traditional UV photoinitiating systems are currently the focus of numerous safety concerns so alternatives to UV light are being actively researched. However, visible light photons are less energetic than UV photons so the reactivity of the photoinitiating systems should be improved to address this issue. In this field, furane constitutes an interesting candidate for the design of photocatalysts of polymerization due to its low cost and its easy chemical modification. In this review, an overview concerning the design of furane-based photoinitiators is provided. Comparisons with reference systems are also established to demonstrate evidence of the interest of these photoinitiators in innovative structures.

Latest Advances in Highly Efficient Dye-Based Photoinitiating Systems for Radical Polymerization

Light-activated polymerization is one of the most important and powerful strategies for fabrication of various types of advanced polymer materials. Because of many advantages, such as economy, efficiency, energy saving and being environmentally friendly, etc., photopolymerization is commonly used in different fields of science and technology. Generally, the initiation of polymerization reactions requires not only light energy but also the presence of a suitable photoinitiator (PI) in the photocurable composition. In recent years, dye-based photoinitiating systems have revolutionized and conquered the global market of innovative PIs. Since then, numerous photoinitiators for radical polymerization containing different organic dyes as light absorbers have been proposed. However, despite the large number of initiators designed, this topic is still relevant today. The interest towards dye-based photoinitiating systems continues to gain in importance, which is related to the need for new initiators capable of effectively initiating chain reactions under mild conditions. In this paper we present the most important information about photoinitiated radical polymerization. We describe the main directions for the application of this technique in various areas. Attention is mainly focused on the review of high-performance radical photoinitiators containing different sensitizers. Moreover, we present our latest achievements in the field of modern dye-based photoinitiating systems for the radical polymerization of acrylates.

Synthesis and Optical Properties of a Series of Push-Pull Dyes Based on Pyrene as the Electron Donor

Fifteen push-pull dyes comprising the tetracyclic polyaromatic pyrene have been designed and synthesized. The optical properties of the fifteen dyes have been examined in twenty-two solvents of different polarities. Surprisingly, contrarily to what is classically observed for push-pull dyes of D-π-A structures, a negative solvatochromism could be found for numerous dyes. The photoluminescence and thermal properties of the dyes were also examined. Theoretical calculations were carried out to support the experimental results.

Pentacyclic and Hexacyclic Osmaarynes and Their Derivatives

Although osmabenzyne, osmanaphthalyne, osmaphenanthryne, and osmaanthracyne have been previously reported, the synthesis of polycyclic osmaarynes is still a challenge. Herein, we report the successful synthesis of the first pentacyclic osmaarynes (pyreno[b]osmabenzynes 1 a and 2 a) and hexacyclic osmaaryne (peryleno[b]osmabenzyne 3 a). Nucleophilic reaction of osmaarynes was used to obtain the corresponding pyreno[b]osmium complexes (1 and 2) and peryleno[b] osmium complex (3), which exhibited near-infrared luminescence and aggregation-induced emission (AIE) properties. Complexes 2 and 3 are resistant to photodegradation, and complex 2 has better photothermal conversion properties than 3.

Photoinduced Organic Reactions by Employing Pyrene Catalysts

Pyrene is one of the most attractive polycyclic aromatic hydrocarbons (PAHs) in photochemistry. Based on their redox properties, pyrenes have potential as photosensitizers. In this review, we summarize recent developments in pyrene-catalyzed photoinduced organic reactions occurring via energy transfer or single-electron transfer based on the excited state of the pyrene.

1 Introduction

2 Photolysis Involving N–O Bond Cleavage or Decarboxylation

3 (Cyclo)addition Reactions with Styrenes

4 Transformations via Cleavage of C–F, C–I, C–S and C–N Bonds

5 Reactions Based on Sensitization-Initiated Electron Transfer (SenI­-ET)

6 Miscellaneous Transformations

7 Conclusion

Pyrene-Functionalized Fluorescent Nanojars: Synthesis, Mass Spectrometric, and Photophysical Studies

Nanojars are a class of supramolecular coordination complexes based on pyrazolate, Cu2+, and OH- ions that self-assemble around highly hydrophilic anions and serve as efficient anion binding and extraction agents. In this work, the synthesis, characterization, and photophysical properties of pyrene-functionalized fluorescent nanojars are presented. Three pyrene derivatives, 4-(pyren-1-yl)pyrazole (HL1), 4-(5-(pyren-1-yl)pent-4-yn-1-yl)pyrazole (HL2), and 4-(3-(pyrazol-4-yl)propyl)-1-(pyren-1-yl)-1,2,3-triazole (HL3), and the corresponding nanojars were synthesized and characterized using nuclear magnetic resonance spectroscopy and mass spectrometry. Electronic absorption, steady-state, and time-resolved fluorescence measurements were carried out to understand the interaction between the pyrene fluorophore and copper nanojars. Optical absorption measurements have shown minor ground state interaction between the fluorophore and nanojars. The fluorescence of pyrene is significantly quenched when attached to nanojars, suggesting strong contribution from the paramagnetic Cu2+ ions. Significant static quenching is observed in the case of L1, when pyrene is directly bound to the nanojar, whereas in the case of L2 and L3, when pyrene is attached to the nanojars using flexible tethers, both static and dynamic quenching are observed.

Recent Advances in bis-Chalcone-Based Photoinitiators of Polymerization: From Mechanistic Investigations to Applications

Over the past several decades, photopolymerization has become an active research field, and the ongoing efforts to develop new photoinitiating systems are supported by the different applications in which this polymerization technique is involved-including dentistry, 3D and 4D printing, adhesives, and laser writing. In the search for new structures, bis-chalcones that combine two chalcones' moieties within a unique structure were determined as being promising photosensitizers to initiate both the free-radical polymerization of acrylates and the cationic polymerization of epoxides. In this review, an overview of the different bis-chalcones reported to date is provided. Parallel to the mechanistic investigations aiming at elucidating the polymerization mechanisms, bis-chalcones-based photoinitiating systems were used for different applications, which are detailed in this review.

Isomeric Pyrene-Porphyrins for Efficient Dye-Sensitized Solar Cells: An Unexpected Enhancement of the Photovoltaic Performance upon Structural Modification

Four pyrene-porphyrins were synthesized to study the isomer effect on the photovoltaic performance of dye-sensitized solar cells. One of these porphyrins is conjugated with a terminal pyrene, whereas the other three are each attached with a pyrene bearing an extra donor group. According to the positions of the extra donor and porphyrin core on pyrene, the 1,6-, 1,8-, and 2,7-isomers were compared for their fundamental and photovoltaic properties. For fundamental properties, UV-visible absorption, fluorescence emission, electrochemistry, and DFT calculations were carried out. For photovoltaic measurements, the seemingly inferior 1,8-isomer outperforms others with an overall efficiency of 10.30% under one-sun irradiation. Superior photovoltaic performance of the 1,8-isomeric dye may be related to the so-called umbrella effect. The findings of this work may provide insight into isomeric dye design for future applications.

Pyrene-Terminated Tin Sulfide Clusters: Optical Properties and Deposition on a Metal Surface

Herein, we present the synthesis of two pyrene-functionalized clusters, [(Rpyr Sn)4 S6 ]⋅2 CH2 Cl2 (4) and [(Rpyr Sn)4 Sn2 S10 ]⋅n CH2 Cl2 (n=4, 5 a; n=2, 5 b; Rpyr =CMe2 CH2 C(Me)N-NC(H)C16 H9 ), both of which form in reactions of the organotin sulfide cluster [(RN Sn)4 S6 ] (C; RN =CMe2 CH2 C(Me)N-NH2 ) with the well-known fluorescent dye 1-pyrenecarboxaldehyde (B). In contrast, reactions using an organotin sulfide cluster with another core structure, [(RN Sn)3 S4 Cl] (A), leads to formation of small molecular fragments, [(Rpyr Cl2 Sn)2 S] (1), (pyren-1-ylmethylene)hydrazine (2), and 1,2-bis(pyren-1-ylmethylene)hydrazine (3). Besides synthesis and structures of the new compounds, we report the influence of the inorganic core on the optical properties of the dye, which was analyzed exemplarily for compound 5 a via absorption and fluorescence spectroscopy. This cluster was also used for exploring the potential of such non-volatile clusters for deposition on a metal surface under vacuum conditions.

Recent Advances on Copper Complexes as Visible Light Photoinitiators and (Photo) Redox Initiators of Polymerization

Metal complexes are used in numerous chemical and photochemical processes in organic chemistry. Metal complexes have not been excluded from the interest of polymerists to convert liquid resins into solid materials. If iridium complexes have demonstrated their remarkable photochemical reactivity in polymerization, their high costs and their attested toxicities have rapidly discarded these complexes for further developments. Conversely, copper complexes are a blooming field of research in (photo) polymerization due to their low cost, easy syntheses, long-living excited state lifetimes, and their remarkable chemical and photochemical stabilities. Copper complexes can also be synthesized in solution and by mechanochemistry, paving the way towards the synthesis of photoinitiators by Green synthetic approaches. In this review, an overview of the different copper complexes reported to date is presented. Copper complexes are versatile candidates for polymerization, as these complexes are now widely used not only in photopolymerization, but also in redox and photoassisted redox polymerization processes.

Highly Effective Sensitizers Based on Merocyanine Dyes for Visible Light Initiated Radical Polymerization

The 5-(4-substituted-arylidene)-1,3-dimethylpyrimidine-2,4,6-triones were tested as visible light sensitizers for phenyltrialkylborate salts applied to initiate polymerization processes. The initiation occurs as a result of photoinduced electron transfer from the borate salt to the merocyanine dye. The main factor that facilitates the step of the reaction is the free energy change for electron transfer. Its value is favorable according to the reduction properties of the dyes influenced by the type of amino groups and the oxidation potentials of the borate salts. The observed bleaching of the dyes during photopolymerization affects the yield of both the alkyl radical and sensitizer-based radical formation and thus the efficiency of the photopolymerization.

Free Radical Photopolymerization and 3D Printing Using Newly Developed Dyes: Indane-1,3-Dione and 1H-Cyclopentanaphthalene-1,3-Dione Derivatives as Photoinitiators in Three-Component Systems

The design of photoinitiating systems with excellent photochemical reactivities at 405nm LED is one of the obstacles to efficiently promote free radical polymerization in mild conditions (e.g., low light intensity, under air). Here, our actual search for new multicomponent photoinitiating systems at 405nm LED prompts us to develop new dyes based on push–pull structures. In the present paper, we chose two series of new dyes which possess indane-1,3-dione and 1H-cyclopenta naphthalene-1,3-dione groups as the electron-withdrawing groups, since they have the great potential to behave as sensitive and remarkable photoinitiators in vat photopolymerization/3D printing. When incorporated with a tertiary amine (ethyl dimethylaminobenzoate EDB, used as electron/hydrogen donor) and an iodonium salt (used as electron acceptor) as the three-component photoinitiating systems (PISs), and among a series of 21 dyes, 10 of them could efficiently promote the free radical photopolymerization of acrylates. Interestingly, steady state photolysis experiments revealed different behaviors of the dyes. Fluorescence experiments and free energy change calculations for redox processes were also carried out to investigate the relevant chemical mechanisms. Additionally, the formation of radicals from the investigated PISs was clearly observed by electron spin resonance (ESR) spin-trapping experiments. Finally, stereoscopic 3D patterns were successfully fabricated by the laser writing technique. In this work, the use of push–pull dyes based on the naphthalene scaffold as photoinitiators of polymerization is reported for the first time in a systematic study aiming at investigating the structure–performance relationship for irradiation carried out at 405 nm. By carefully selecting the electron donors used in the two series of push–pull dyes, novel and high-performance photoinitiating systems operating at 405 nm are thus proposed.

Structural effect of oxazolone derivatives on the initiating abilities of dye-borate photoredox systems in radical polymerization under visible light

Three photoinitiating systems based on new oxazolone derivatives have been developed and their performance in initiation of radical polymerization of acrylate monomers has been tested by differential scanning calorimetry. The absorption characteristics of the oxazol-5(4H)-ones is compatible with the emission characteristics of different light sources like diode pulse solid state lasers. Thus, the dyes were used as sensitizers which are photoreduced during a photochemical reaction in the presence of phenyltriethylborate salt. Results showed that the increase in the dimensionality of the molecule extends the range of light absorption and increases the efficiency of the photoinitiation process. The photoreduction of the oxazolone–borate complex was studied using steady-state and nanosecond laser flash photolysis. The dye singlet and triplet were found to be quenched by the electron donor via an electron transfer process. Rate constants for the quenching of the excited states were high and were found to depend on the dye structure.

Three photoinitiating systems based on new oxazolone derivatives have been developed and their performance in initiation of radical polymerization of acrylate monomers has been tested by differential scanning calorimetry.

Novel ketone derivative-based photoinitiating systems for free radical polymerization under mild conditions and 3D printing

Novel ketone derivatives as efficient photoinitiators for the free radical polymerization of acrylates and application in 3D printing.