In vitro-to-in vivo correlation of the skin penetration, liver clearance and hepatotoxicity of caffeine

Current therapeutic targets and multifaceted physiological impacts of caffeine

Caffeine, which shares consubstantial structural similarity with purine adenosine, has been demonstrated as a nonselective adenosine receptor antagonist for eliciting most of the biological functions at physiologically relevant dosages. Accumulating evidence supports caffeine's beneficial effects against different disorders, such as total cardiovascular diseases and type 2 diabetes. Conversely, paradoxical effects are also linked to caffeine ingestion in humans including hypertension-hypotension and tachycardia-bradycardia. These observations suggest the association of caffeine action with its ingested concentration and/or concurrent interaction with preferential molecular targets to direct explicit events in the human body. Thus, a coherent analysis of the functional targets of caffeine, relevant to normal physiology, and disease pathophysiology, is required to understand the pharmacology of caffeine. This review provides a broad overview of the experimentally validated targets of caffeine, particularly those of therapeutic interest, and the impacts of caffeine on organ-specific physiology and pathophysiology. Overall, the available empirical and epidemiological evidence supports the dose-dependent functional activities of caffeine and advocates for further studies to get insights into the caffeine-induced changes under specific conditions, such as asthma, DNA repair, and cancer, in view of its therapeutic applications.

Prediction of drug permeation through microneedled skin by machine learning

Stratum corneum is the outermost layer of the skin preventing external substances from entering human body. Microneedles (MNs) are sharp protrusions of a few hundred microns in length, which can penetrate the stratum corneum to facilitate drug permeation through skin. To determine the amount of drug delivered through skin, in vitro drug permeation testing is commonly used, but the testing is costly and time-consuming. To address this issue, machine learning methods were employed to predict drug permeation through the skin, circumventing the need of conducting skin permeation experiments. By comparing the experimental data and simulated results, it was found extreme gradient boosting (XGBoost) was the best among the four simulation methods. It was also found that drug loading, permeation time, and MN surface area were critical parameters in the models. In conclusion, machine learning is useful to predict drug permeation profiles for MN-facilitated transdermal drug delivery.

Assessment of penetration and permeation of caffeine by confocal Raman spectroscopy in vivo and ex vivo by tape stripping

OBJECTIVE

Tape stripping is an often-used non-invasive destructive method to investigate the skin penetration of a substance. In recent years, however, the suitability of confocal Raman spectroscopy (CRS) as a non-invasive method of non-destructive examination of the skin has become increasingly apparent. In this study, we compared invasion and depletion penetration and permeation kinetics of a 2% caffeine solution with and without 1,2-pentanediol as a penetration enhancer measured with CRS and tape stripping.

METHODS

Porcine skin was used for tape stripping and human skin for CRS. 2% caffeine solution was applied to the skin for different incubation times. Human skin was then examined by CRS while caffeine was extracted from porcine skin and quantified via reverse-phase HPLC. Fluxes were also measured and calculated by sum of the total amounts of caffeine penetrated into the skin.

RESULTS

Without penetration enhancers, there is hardly any difference between the penetration profiles of the two measurement methods for invasion, but the curves for depletion are different. Furthermore, the calculated flux values for the invasion are almost identical, but for the depletion the tape stripping values are about twice as high as the CRS values.

CONCLUSION

The relevance of conducting invasion and depletion studies became clear and was able to show the still existing problems in the comparability of CRS and tape stripping.

Assessment of caffeine neurotoxicity using novel biomarkers of neural function in SH-SY5Y cells - Is there a need for environmental concern?

Worldwide usage of caffeine results in its constant release into the aquatic environment and growing concerns related to associated risks. We assessed (neuro)toxicity of environmentally relevant concentrations of caffeine, using novel biomarkers of neural function in SH-SY5Y cells and markers of general toxicity also in HepG2 cells. The RQ-PCR analyses showed that caffeine disturbs the expression of genes encoding several key elements of neurotransmitter pathways, with the most prominent responses observed for serotonin receptor 3A, dopamine receptor D2, monoamine oxidase B and GABA-transaminase. Expression of genes encoding synaptotagmin 10 involved in exocytosis of neurotransmitters and ATPase Na⁺/K⁺ transporting subunit alpha 3 was also disturbed. Caffeine stimulated the activity of monoamine oxidase, while cytotoxicity and effects on mitochondrial membrane potential were not observed. Our study points out the new possible molecular targets of caffeine and suggests that the raising concerns related to its growing environmental presence are justified.

Comparison Between Franz Diffusion Cell and a novel Micro-physiological System for In Vitro Penetration Assay Using Different Skin Models

In vitro diffusive models are an important tool to screen the penetration ability of active ingredients in various formulations. A reliable assessment of skin penetration enhancing properties, mechanism of action of carrier systems, and an estimation of a bioavailability are essential for transdermal delivery. Given the importance of testing the penetration kinetics of different compounds across the skin barrier, several in vitro models have been developedThe aim of this study was to compare the Franz Diffusion Cell (FDC) with a novel fluid-dynamic platform (MIVO) by evaluating penetration ability of caffeine, a widely used reference substance, and LIP1, a testing molecule having the same molecular weight but a different lipophilicity in the two diffusion chamber systems. A 0.7% caffeine or LIP1 formulation in either water or propylene glycol (PG) containing oleic acid (OA) was topically applied on the Strat-M® membrane or pig ear skin, according to the infinite-dose experimental condition (780 ul/cm²). The profile of the penetration kinetics was determined by quantify the amount of molecule absorbed at different time-points (1, 2, 4, 6, 8 hours), by means of HPLC analysis. Both diffusive systems show a similar trend for caffeine and LIP1 penetration kinetics. The Strat-M® skin model shows a lower barrier function than the pig skin biopsies, whereby the PGOA vehicle exhibits a higher penetration, enhancing the effect for both diffusive chambers and skin surrogates. Most interestingly, MIVO diffusive system better predicts the lipophilic molecules (i.e. LIP1) permeation through highly physiological fluid flows resembled below the skin models.

Skin models for dermal exposure assessment of phthalates

Phthalates are a class of compounds that have found widespread use in industrial applications, in particular in the polymer, cosmetics and pharmaceutical industries. While ingestion, and to a lesser degree inhalation, have been considered as the major exposure routes, especially for higher molecular weight phthalates, dermal exposure is an important route for lower weight phthalates such as diethyl phthalate (DEP). Assessing the dermal permeability of such compounds is of great importance for evaluating the impact and toxicity of such compounds in humans. While human skin is still the best model for studying dermal permeation, availability, cost and ethical concerns may preclude or restrict its use. A range of alternative models has been developed over time to substitute for human skin, especially in the early phases of research. These include ex vivo animal skin, human reconstructed skin and artificial skin models. While the results obtained using such alternative models correlate to a lesser or greater degree with those from in vivo human studies, the use of such models is nevertheless vital in dermal permeation research. This review discusses the alternative skin models that are available, their use in phthalate permeation studies and possible new avenues of phthalate research using skin models that have not been used so far.

In Vitro and In Vivo Approaches for Screening the Potential of Anticancer Agents: A Review

BACKGROUND

Anticancer drug development is a tedious process, requiring several in vitro, in vivo, and clinical studies. In order to avoid chemical toxicity in animals during an experiment, it is necessary to envisage toxic doses of screened drugs in vivo at different concentrations. Several in vitro and in vivo studies have been reported to discover the management of cancer.

MATERIALS AND METHODS

This study focused on bringing together a wide range of in vivo and in vitro assay methods developed to evaluate each hallmark feature of cancer.

RESULT

This review provides detailed information on target-based and cell-based screening of new anticancer drugs in the molecular targeting period. This would help in inciting an alteration from the preclinical screening of pragmatic compound-orientated to target-orientated drug selection.

CONCLUSION

Selection methodologies for finding anticancer activity have importance for tumor- specific agents. In this study, advanced rationalization of the cell-based assay is explored along with broad applications of the cell-based methodologies considering other opportunities.

A Review on Emerging Pollutants in the Water Environment: Existences, Health Effects and Treatment Processes

Emerging pollutants (EPs), also known as micropollutants, have been a major issue for the global population in recent years as a result of the potential threats they bring to the environment and human health. Pharmaceuticals and personal care products (PPCPs), antibiotics, and hormones that are used in great demand for health and cosmetic purposes have rapidly culminated in the emergence of environmental pollutants. EPs impact the environment in a variety of ways. EPs originate from animal or human sources, either directly discharged into waterbodies or slowly leached via soils. As a result, water quality will deteriorate, drinking water sources will be contaminated, and health issues will arise. Since drinking water treatment plants rely on water resources, the prevalence of this contamination in aquatic environments, particularly surface water, is a severe problem. The review looks into several related issues on EPs in water environment, including methods in removing EPs. Despite its benefits and downsides, the EPs treatment processes comprise several approaches such as physico-chemical, biological, and advanced oxidation processes. Nonetheless, one of the membrane-based filtration methods, ultrafiltration, is considered as one of the technologies that promises the best micropollutant removal in water. With interesting properties including a moderate operating manner and great selectivity, this treatment approach is more popular than conventional ones. This study presents a comprehensive summary of EP’s existence in the environment, its toxicological consequences on health, and potential removal and treatment strategies.

New framework for a non-animal approach adequately assures the safety of cosmetic ingredients - A case study on caffeine

This case study on the model substance caffeine demonstrates the viability of a 10-step read-across (RAX) framework in practice. New approach methodologies (NAM), including RAX and physiologically-based kinetic (PBK) modelling were used to assess the consumer safety of caffeine. Appropriate animal systemic toxicity data were used from the most relevant RAX analogue while assuming that no suitable animal toxicity data were available for caffeine. Based on structural similarities, three primary metabolites of the target chemical caffeine (theophylline, theobromine and paraxanthine) were selected as its most relevant analogues, to estimate a point of departure in order to support a next generation risk assessment (NGRA). On the basis of the pivotal mode of action (MOA) of caffeine and other methylxanthines, theophylline appeared to be the most potent and suitable analogue. A worst-case aggregate exposure assessment determined consumer exposure to caffeine from different sources, such as cosmetics and food/drinks. Using a PBK model to estimate human blood concentrations following exposure to caffeine, an acceptable Margin of Internal Exposure (MOIE) of 27-fold was derived on the basis of a RAX using theophylline animal data, which suggests that the NGRA approach for caffeine is sufficiently conservative to protect human health.

Methods for evaluating penetration of drug into the skin: A review

BACKGROUND

Skin being the largest organ of the human body plays a very important role in the permeation and penetration of the drug. In addition, the transdermal drug delivery system (TDDS) plays a major role in managing dermal infections and attaining sustained plasma drug concentration. Thus, evaluation of percutaneous penetration of the drug through the skin is important in developing TDDS for human use.

MATERIAL AND METHODS

Various techniques are used for getting the desired drug penetration, permeation, and absorption through the skin in managing these dermal disorders. The development of novel pharmaceutical dosage forms for dermal use is much explored in the current era. However, it is very important to evaluate these methods to determine the bioequivalence and risk of these topically applied drugs, which ultimately penetrate and are absorbed through the skin.

RESULTS

Currently, numerous skin permeation models are being developed and persuasively used in studying dermatopharmacokinetic (DPK) profile and various models have been developed, to evaluate the TDD which include ex vivo human skin, ex vivo animal skin, and artificial or reconstructed skin models.

CONCLUSION

This review discusses the general physiology of the skin, the physiochemical characteristics affecting particle penetration, understand the models used for human skin permeation studies and understanding their advantages, and disadvantages.

3D-Printed Franz cells - update on optimization of manufacture and evaluation

OBJECTIVES

Laboratory in vitro permeation processes require the use of modified Franz type diffusion cells which are conventionally fabricated from glass. Fragility and high cost are frequently associated with this type of laboratory apparatus. The purpose of our present research was to develop a simple, economical and versatile approach to manufacture Franz type cells using additive manufacturing (AM).

METHODS

Graphical Franz diffusion cell designs were reproduced with a stereolithography (SLA) 3D printer and assessed over a minimum period of 24 h. The surface morphology of AM printouts was analysed before and after compatibility studies using scanning electron microscopy (SEM). Comparative permeation studies in both glass and AM Franz type diffusion cells were conducted using a caffeine solution (1.5 mg mL^-1 ), applied to a model silicone membrane.

RESULTS

Testing of the 3D printed scaffolds confirmed similar recovery of the permeant when compared to glass cells: 1.49 ± 0.01 and 1.50 ± 0.01 mg mL^-1 , respectively, after 72 h. No significant differences were visible from the SEM micrographs demonstrating consistent, smooth and non-porous surfaces of the AM Franz cells' core structure. Permeation studies using transparent 3D printed constructs resulted in 12.85 ± 0.53 µg cm^-2 caffeine recovery in the receptor solution after 180 min with comparable permeant recovery, 11.49 ± 1.04 µg cm^-2 , for the glass homologues.

CONCLUSION

AM constructs can be considered as viable alternatives to the use of conventional glass apparatus offering a simple, reproducible and cost-effective method of replicating specialised laboratory glassware. A wider range of permeants will be investigated in future studies with these novel 3D printed Franz diffusion cells.

Electrospun wound dressing as a promising tool for the therapeutic delivery of ascorbic acid and caffeine

Aim: The aim of this work is to formulate a wound dressing for the delivery of ascorbic acid and caffeine. Method: A wound dressing was developed from electrospun nanofiber containing ascorbic acid and caffeine. In vitro drug release was performed at 25°C and 32°C. Wound healing activity of the nanofiber mats was tested in vivo using rat model with skin excision. Antifungal activity of the dressing was tested on Candida albicans using the disc diffusion method. Results & conclusion: Zone of inhibition was 6.7 mm for caffeine dressing; however, inhibition zone increased to 16.7 mm for samples containing both caffeine and ascorbic acid. Animals treated with ascorbic acid showed collagen deposition and very few fibroblast cells. Blood vessels and fibroblasts were increased in caffeine-loaded dressings compared with the ascorbic acid group. The findings of the present work suggest the benefits of topical ascorbic acid and caffeine for its high wound healing effects.

Evaluation of toxicokinetics of nonylphenol in the adult female Sprague-Dawley rats using a physiologically based toxicokinetic model

The physiologically based toxicokinetic (PBTK) model was firstly developed in female rats to quantitatively evaluate toxicokinetics of nonylphenol (NP). Changes in NP serum concentrations over time of single oral NP administration experiments in Sprague-Dawley rats and literature data were collected to establish and calibrate the PBTK model in the SimBiology framework. The calibrated model predicted the serum and tissue NP concentrations of repeat oral NP administration for model evaluation. NP concentrations in serum and tissues (liver, kidneys, adipose, brain, uterus and ovaries) were quantified using ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The model output of the time course data (values are within the standard deviation defined for each data point) indicated proximity of predictions to reality. The coefficients of determination r² were all greater than 0.9, and the root mean squared error (RMSE) were within 0.177-2.027, which means the model predicted and observed serum NP concentrations were in excellent agreement. The results indicated that the model could contribute to a simplification of the future exposure risk assessments of NP in a more realistic scenario and provided a better understanding of the disposition process of NP in human.

In vitro to in vivo extrapolation for high throughput prioritization and decision making

In vitro chemical safety testing methods offer the potential for efficient and economical tools to provide relevant assessments of human health risk. To realize this potential, methods are needed to relate in vitro effects to in vivo responses, i.e., in vitro to in vivo extrapolation (IVIVE). Currently available IVIVE approaches need to be refined before they can be utilized for regulatory decision-making. To explore the capabilities and limitations of IVIVE within this context, the U.S. Environmental Protection Agency Office of Research and Development and the National Toxicology Program Interagency Center for the Evaluation of Alternative Toxicological Methods co-organized a workshop and webinar series. Here, we integrate content from the webinars and workshop to discuss activities and resources that would promote inclusion of IVIVE in regulatory decision-making. We discuss properties of models that successfully generate predictions of in vivo doses from effective in vitro concentration, including the experimental systems that provide input parameters for these models, areas of success, and areas for improvement to reduce model uncertainty. Finally, we provide case studies on the uses of IVIVE in safety assessments, which highlight the respective differences, information requirements, and outcomes across various approaches when applied for decision-making.

Virtual Cell Based Assay simulations of intra-mitochondrial concentrations in hepatocytes and cardiomyocytes

In order to replace the use of animals in toxicity testing, there is a need to predict human in vivo toxic doses from concentrations that cause adverse effects in in vitro test systems. The virtual cell based assay (VCBA) has been developed to simulate intracellular concentrations as a function of time, and can be used to interpret in vitro concentration-response curves. In this study we refine and extend the VCBA model by including additional target-organ cell models and by simulating the fate and effects of chemicals at the organelle level. In particular, we describe the extension of the original VCBA to simulate chemical fate in liver (HepaRG) cells and cardiomyocytes (ICell cardiomyocytes), and we explore the effects of chemicals at the mitochondrial level. This includes a comparison of: a) in vitro results on cell viability and mitochondrial membrane potential (mmp) from two cell models (HepaRG cells and ICell cardiomyocytes); and b) VCBA simulations, including the cell and mitochondrial compartment, simulating the mmp for both cell types. This proof of concept study illustrates how the relationship between intra cellular, intra mitochondrial concentration, mmp and cell toxicity can be obtained by using the VCBA.

From in vitro to in vivo: Integration of the virtual cell based assay with physiologically based kinetic modelling

Physiologically based kinetic (PBK) models and the virtual cell based assay can be linked to form so called physiologically based dynamic (PBD) models. This study illustrates the development and application of a PBK model for prediction of estragole-induced DNA adduct formation and hepatotoxicity in humans. To address the hepatotoxicity, HepaRG cells were used as a surrogate for liver cells, with cell viability being used as the in vitro toxicological endpoint. Information on DNA adduct formation was taken from the literature. Since estragole induced cell damage is not directly caused by the parent compound, but by a reactive metabolite, information on the metabolic pathway was incorporated into the model. In addition, a user-friendly tool was developed by implementing the PBK/D model into a KNIME workflow. This workflow can be used to perform in vitro to in vivo extrapolation and forward as backward dosimetry in support of chemical risk assessment.

Ab initio chemical safety assessment: A workflow based on exposure considerations and non-animal methods

We describe and illustrate a workflow for chemical safety assessment that completely avoids animal testing. The workflow, which was developed within the SEURAT-1 initiative, is designed to be applicable to cosmetic ingredients as well as to other types of chemicals, e.g. active ingredients in plant protection products, biocides or pharmaceuticals. The aim of this work was to develop a workflow to assess chemical safety without relying on any animal testing, but instead constructing a hypothesis based on existing data, in silico modelling, biokinetic considerations and then by targeted non-animal testing. For illustrative purposes, we consider a hypothetical new ingredient x as a new component in a body lotion formulation. The workflow is divided into tiers in which points of departure are established through in vitro testing and in silico prediction, as the basis for estimating a safe external dose in a repeated use scenario. The workflow includes a series of possible exit (decision) points, with increasing levels of confidence, based on the sequential application of the Threshold of Toxicological (TTC) approach, read-across, followed by an "ab initio" assessment, in which chemical safety is determined entirely by new in vitro testing and in vitro to in vivo extrapolation by means of mathematical modelling. We believe that this workflow could be applied as a tool to inform targeted and toxicologically relevant in vitro testing, where necessary, and to gain confidence in safety decision making without the need for animal testing.

Investigating the state of physiologically based kinetic modelling practices and challenges associated with gaining regulatory acceptance of model applications

Physiologically based kinetic (PBK) models are used widely throughout a number of working sectors, including academia and industry, to provide insight into the dosimetry related to observed adverse health effects in humans and other species. Use of these models has increased over the last several decades, especially in conjunction with emerging alternative methods to animal testing, such as in vitro studies and data-driven in silico quantitative-structure-activity-relationship (QSAR) predictions. Experimental information derived from these new approach methods can be used as input for model parameters and allows for increased confidence in models for chemicals that did not have in vivo data for model calibration. Despite significant advancements in good modelling practice (GMP) for model development and evaluation, there remains some reluctance among regulatory agencies to use such models during the risk assessment process. Here, the results of a survey disseminated to the modelling community are presented in order to inform the frequency of use and applications of PBK models in science and regulatory submission. Additionally, the survey was designed to identify a network of investigators involved in PBK modelling and knowledgeable of GMP so that they might be contacted in the future for peer review of PBK models, especially in regards to vetting the models to such a degree as to gain a greater acceptance for regulatory purposes.

•

Physiologically Based kinetic (PBK) models are used widely in academia, industry, and government.

•

Good modelling practice (GMP) for model development and evaluation continues to expand.

•

Further guidance for establishing GMP is called for.

•

There remains some reluctance among regulatory agencies to use PBK models.

•

The next generation of PBK models could be developed using only data from in vitro and in silico methods.

Automated workflows for modelling chemical fate, kinetics and toxicity

Automation is universal in today's society, from operating equipment such as machinery, in factory processes, to self-parking automobile systems. While these examples show the efficiency and effectiveness of automated mechanical processes, automated procedures that support the chemical risk assessment process are still in their infancy. Future human safety assessments will rely increasingly on the use of automated models, such as physiologically based kinetic (PBK) and dynamic models and the virtual cell based assay (VCBA). These biologically-based models will be coupled with chemistry-based prediction models that also automate the generation of key input parameters such as physicochemical properties. The development of automated software tools is an important step in harmonising and expediting the chemical safety assessment process. In this study, we illustrate how the KNIME Analytics Platform can be used to provide a user-friendly graphical interface for these biokinetic models, such as PBK models and VCBA, which simulates the fate of chemicals in vivo within the body and in vitro test systems respectively.

•

The VCBA is a mathematical model that simulates in vitro fate of chemicals and the corresponding cellular effect.

•

The VCBA has been implemented in an open access web-based KNIME platform for ease of use.

•

KNIME Analytics Platform can be used to provide a user-friendly graphical interface for biokinetic models.

The margin of internal exposure (MOIE) concept for dermal risk assessment based on oral toxicity data - A case study with caffeine

Route-to-route extrapolation is a common part of human risk assessment. Data from oral animal toxicity studies are commonly used to assess the safety of various but specific human dermal exposure scenarios. Using theoretical examples of various user scenarios, it was concluded that delineation of a generally applicable human dermal limit value is not a practicable approach, due to the wide variety of possible human exposure scenarios, including its consequences for internal exposure. This paper uses physiologically based kinetic (PBK) modelling approaches to predict animal as well as human internal exposure dose metrics and for the first time, introduces the concept of Margin of Internal Exposure (MOIE) based on these internal dose metrics. Caffeine was chosen to illustrate this approach. It is a substance that is often found in cosmetics and for which oral repeated dose toxicity data were available. A rat PBK model was constructed in order to convert the oral NOAEL to rat internal exposure dose metrics, i.e. the area under the curve (AUC) and the maximum concentration (C_max), both in plasma. A human oral PBK model was constructed and calibrated using human volunteer data and adapted to accommodate dermal absorption following human dermal exposure. Use of the MOIE approach based on internal dose metrics predictions provides excellent opportunities to investigate the consequences of variations in human dermal exposure scenarios. It can accommodate within-day variation in plasma concentrations and is scientifically more robust than assuming just an exposure in mg/kg bw/day.

The virtual cell based assay: Current status and future perspectives

In order to replace the use of animals in toxicity testing, there is a need to predict in vivo toxic doses from concentrations that cause toxicological effects in relevant in vitro systems. The Virtual Cell Based Assay (VCBA) estimates time-dependent concentration of a test chemical in the cell and cell culture for a given in vitro system. The concentrations in the different compartments of the cell and test system are derived from ordinary differential equations, physicochemical parameters of the test chemical and properties of the cell line. The VCBA has been developed for a range of cell lines including BALB/c 3T3 cells, HepG2, HepaRG, lung A459 cells, and cardiomyocytes. The model can be used to design and refine in vitro experiments and extrapolate in vitro effective concentrations to in vivo doses that can be applied in risk assessment. In this paper, we first discuss potential applications of the VCBA: i) design of in vitro High Throughput Screening (HTS) experiments; ii) hazard identification (based on acute systemic toxicity); and iii) risk assessment. Further extension of the VCBA is discussed in the second part, exploring potential application to i) manufactured nanomaterials, ii) additional cell lines and endpoints, and considering iii) other opportunities.

•

VCBA as an alternative approach can be applied in the domain of nanotoxicology.

•

VCBA can support better testing strategies in acute toxicity.

•

Refinement of the VCBA taking into account biological oscillators could improve toxicity prediction.

•

Extensions of the VCBA can capture effects related to additional subcellular compartments.

Insights on in vitro models for safety and toxicity assessment of cosmetic ingredients

According to the current European legislation, the safety assessment of each individual cosmetic ingredient of any formulation is the basis for the safety evaluation of a cosmetic product. Also, animal testing in the European Union is prohibited for cosmetic ingredients and products since 2004 and 2009, respectively. Additionally, the commercialization of any cosmetic products containing ingredients tested on animal models was forbidden in 2009. In consequence of these boundaries, the European Centre for the Validation of Alternative Methods (ECVAM) proposes a list of validated cell-based in vitro models for predicting the safety and toxicity of cosmetic ingredients. These models have been demonstrated as valuable and effective tools to overcome the limitations of animal in vivo studies. Although the use of in vitro cell-based models for the evaluation of absorption and permeability of cosmetic ingredients is widespread, a detailed study on the properties of these platforms and the in vitro-in vivo correlation compared with human data are required. Moreover, additional efforts must be taken to develop in vitro models to predict carcinogenicity, repeat dose toxicity and reproductive toxicity, for which no alternative in vitro methods are currently available. This review paper summarizes and characterizes the most relevant in vitro models validated by ECVAM employed to predict the safety and toxicology of cosmetic ingredients.

Multiscale modelling approaches for assessing cosmetic ingredients safety

The European Union's ban on animal testing for cosmetic ingredients and products has generated a strong momentum for the development of in silico and in vitro alternative methods. One of the focus of the COSMOS project was ab initio prediction of kinetics and toxic effects through multiscale pharmacokinetic modeling and in vitro data integration. In our experience, mathematical or computer modeling and in vitro experiments are complementary. We present here a summary of the main models and results obtained within the framework of the project on these topics. A first section presents our work at the organelle and cellular level. We then go toward modeling cell levels effects (monitored continuously), multiscale physiologically based pharmacokinetic and effect models, and route to route extrapolation. We follow with a short presentation of the automated KNIME workflows developed for dissemination and easy use of the models. We end with a discussion of two challenges to the field: our limited ability to deal with massive data and complex computations.

Confocal Raman microscopy and multivariate statistical analysis for determination of different penetration abilities of caffeine and propylene glycol applied simultaneously in a mixture on porcine skin ex vivo

Propylene glycol is one of the known substances added in cosmetic formulations as a penetration enhancer. Recently, nanocrystals have been employed also to increase the skin penetration of active components. Caffeine is a component with many applications and its penetration into the epidermis is controversially discussed in the literature. In the present study, the penetration ability of two components - caffeine nanocrystals and propylene glycol, applied topically on porcine ear skin in the form of a gel, was investigated ex vivo using two confocal Raman microscopes operated at different excitation wavelengths (785nm and 633nm). Several depth profiles were acquired in the fingerprint region and different spectral ranges, i.e., 526-600cm(-1) and 810-880cm(-1) were chosen for independent analysis of caffeine and propylene glycol penetration into the skin, respectively. Multivariate statistical methods such as principal component analysis (PCA) and linear discriminant analysis (LDA) combined with Student's t-test were employed to calculate the maximum penetration depths of each substance (caffeine and propylene glycol). The results show that propylene glycol penetrates significantly deeper than caffeine (20.7-22.0μm versus 12.3-13.0μm) without any penetration enhancement effect on caffeine. The results confirm that different substances, even if applied onto the skin as a mixture, can penetrate differently. The penetration depths of caffeine and propylene glycol obtained using two different confocal Raman microscopes are comparable showing that both types of microscopes are well suited for such investigations and that multivariate statistical PCA-LDA methods combined with Student's t-test are very useful for analyzing the penetration of different substances into the skin.

Antioxidants in liver health

Liver diseases are a worldwide medical problem because the liver is the principal detoxifying organ and maintains metabolic homeostasis. The liver metabolizes various compounds that produce free radicals (FR). However, antioxidants scavenge FR and maintain the oxidative/antioxidative balance in the liver. When the liver oxidative/antioxidative balance is disrupted, the state is termed oxidative stress. Oxidative stress leads to deleterious processes in the liver and produces liver diseases. Therefore, restoring antioxidants is essential to maintain homeostasis. One method of restoring antioxidants is to consume natural compounds with antioxidant capacity. The objective of this review is to provide information pertaining to various antioxidants found in food that have demonstrated utility in improving liver diseases.