E-Nose and e-Tongue combination for improved recognition of fruit juice samples

Electronic nose technology for the detection of ergot alkaloid in soft wheat and identification of the relevant volatile compounds by solid phase microextraction/gas chromatography-high resolution Orbitrap-mass spectrometry coupled to chemometrics

Ergot alkaloids (EA) are mycotoxins produced by Claviceps purpurea which commonly infects various cereal species, compromising food safety. This study evaluates the potential of the electronic nose to reliably predict EA contamination in wheat, demonstrating as a proof-of-concept the ability of this technology combined with supervised techniques to distinguish samples contaminated at levels of interest from compliant samples. In particular, the average value of samples correctly classified using PLS-DA was 95.5 %. Furthermore, a volatilomics approach based on HS-SPME/GC-Orbitrap HRMS and chemometrics was successfully applied for the first time to characterize the volatile compound pattern of wheat samples based on the level of EA contamination paying attention to the secondary volatile metabolites. Overall, a high confidence in compound identification was achieved with sub-1 ppm mass accuracy. Unsupervised PCA was used for discrimination purposes, revealing 19 differential compounds (markers), some of which are released during the growth of Claviceps Purpurea fungi.

Fluid Classification via the Dual Functionality of Moisture-Enabled Electricity Generation Enhanced by Deep Learning

Classifications of fluids using miniaturized sensors are of substantial importance for various fields of application. Modified with functional nanomaterials, a moisture-enabled electricity generation (MEG) device can execute a dual-purpose operation as both a self-powered framework and a fluid detection platform. In this study, a novel intelligent self-sustained sensing approach was implemented by integrating MEG with deep learning in microfluidics. Following a multilayer design, the MEG device including three individual units for power generation/fluid classification was fabricated in this study by using nonwoven fabrics, hydroxylated carbon nanotubes, poly(vinyl alcohol)-mixed gels, and indium tin bismuth liquid alloy. A composite configuration utilizing hydrophobic microfluidic channels and hydrophilic porous substrates was conducive to self-regulation of the on-chip flow. As a generator, the MEG device was capable of maintaining a continuous and stable power output for at least 6 h. As a sensor, the on-chip units synchronously measured the voltage (V), current (C), and resistance (R) signals as functions of time, whose transitions were completed using relays. These signals can serve as straightforward indicators of a fluid presence, such as the distinctive "fingerprint". After normalization and Fourier transform of raw V/C/R signals, a lightweight deep learning model (wide-kernel deep convolutional neural network, WDCNN) was employed for classifying pure water, kiwifruit, clementine, and lemon juices. In particular, the accuracy of the sample distinction using the WDCNN model was 100% within 15 s. The proposed integration of MEG, microfluidics, and deep learning provides a novel paradigm for the development of sustainable intelligent environmental perception, as well as new prospects for innovations in analytical science and smart instruments.

From Traditional to Intelligent, A Review of Application and Progress of Sensory Analysis in Alcoholic Beverage Industry

Sensory analysis is an interdisciplinary field that combines multiple disciplines to analyze food qualitatively and quantitatively. At present, this analysis method has been widely used in product development, quality control, marketing, flavor analysis, safety supervision and inspection of alcoholic beverages. Due to the changing needs of analysis, new and more optimized methods are still emerging. Thereinto, intelligent and biometric technologies with growing attention have also been applied to sensory analysis. This work summarized the sensory analysis methods from three aspects, including traditional artificial sensory analysis, intelligent sensory technology, and innovative technologies. Meanwhile, the application sensory analysis in alcoholic beverages and its industrial production was scientifically emphasized. Moreover, the future tendency of sensory analysis in the alcoholic beverage industry is also highlights.

Study on the enhanced efficacy mechanism of vinegar-processed Cyperus rotundus in the treatment of primary dysmenorrhea

The enhanced efficacy of vinegar-processed Cyperus rotundus (VCR) in treating primary dysmenorrhea (PD) has been observed. However, the active components and potential mechanisms of synergy are still unclear. The objective of this study was to develop a method that combines bionic technology, plant metabolomics and network pharmacology to discover the active components and potential mechanisms underlying the enhanced therapeutic effects of VCR for PD. Vinegar processing alters the flavor of C. rotundus, leading to changes in its properties. The acidic nature of vinegar enhances the selectivity of the medicine toward the liver, thereby improving its ability to soothe the liver, regulate qi and provide pain relief. Through gas chromatography-mass spectrometry and multivariate statistical analysis, 30 key differential components between raw C. rotundus and VCR have been screened and identified. These differential components primarily exert their therapeutic effects in treating PD by modulating targets such as interleukin-6, TNF, TP53 and PTGS2, as well as pathways including the estrogen signaling pathway, ovarian steroidogenesis, the TNF signaling pathway and the HIF-1 signaling pathway. The findings of this study serve as a reference for the application of VCR in compound formulas and clinic practiceal. Furthermore, the methodology employed in this study provides research insights for the processing of other Chinese medicines.

Evaluation of a Voltametric E-Tongue Combined with Data Preprocessing for Fast and Effective Machine Learning-Based Classification of Tomato Purées by Cultivar

The potential of a voltametric E-tongue coupled with a custom data pre-processing stage to improve the performance of machine learning techniques for rapid discrimination of tomato purées between cultivars of different economic value has been investigated. To this aim, a sensor array with screen-printed carbon electrodes modified with gold nanoparticles (GNP), copper nanoparticles (CNP) and bulk gold subsequently modified with poly(3,4-ethylenedioxythiophene) (PEDOT), was developed to acquire data to be transformed by a custom pre-processing pipeline and then processed by a set of commonly used classifiers. The GNP and CNP-modified electrodes, selected based on their sensitivity to soluble monosaccharides, demonstrated good ability in discriminating samples of different cultivars. Among the different data analysis methods tested, Linear Discriminant Analysis (LDA) proved to be particularly suitable, obtaining an average F1 score of 99.26%. The pre-processing stage was beneficial in reducing the number of input features, decreasing the computational cost, i.e., the number of computing operations to be performed, of the entire method and aiding future cost-efficient hardware implementation. These findings proved that coupling the multi-sensing platform featuring properly modified sensors with the custom pre-processing method developed and LDA provided an optimal tradeoff between analytical problem solving and reliable chemical information, as well as accuracy and computational complexity. These results can be preliminary to the design of hardware solutions that could be embedded into low-cost portable devices.

Application of Data Fusion in Traditional Chinese Medicine: A Review

Traditional Chinese medicine is characterized by numerous chemical constituents, complex components, and unpredictable interactions among constituents. Therefore, a single analytical technique is usually unable to obtain comprehensive chemical information. Data fusion is an information processing technology that can improve the accuracy of test results by fusing data from multiple devices, which has a broad application prospect by utilizing chemometrics methods, adopting low-level, mid-level, and high-level data fusion techniques, and establishing final classification or prediction models. This paper summarizes the current status of the application of data fusion strategies based on spectroscopy, mass spectrometry, chromatography, and sensor technologies in traditional Chinese medicine (TCM) in light of the latest research progress of data fusion technology at home and abroad. It also gives an outlook on the development of data fusion technology in TCM analysis to provide references for the research and development of TCM.

Advancing Insights into Probiotics during Vegetable Fermentation

Fermented vegetables have a long history and are enjoyed worldwide for their unique flavors and health benefits. The process of fermentation improves the nutritional value, taste, and shelf life of foods. Microorganisms play a crucial role in this process through the production of metabolites. The flavors of fermented vegetables are closely related to the evaluation and succession of microbiota. Lactic acid bacteria (LABs) are typically the dominant bacteria in fermented vegetables, and they help inhibit the growth of spoilage bacteria and maintain a healthy gut microbiota in humans. However, homemade and small-scale artisanal products rely on spontaneous fermentation using bacteria naturally present on fresh vegetables or from aged brine, which may introduce external microorganisms and lead to spoilage and substandard products. Hence, understanding the role of LABs and other probiotics in maintaining the quality and safety of fermented vegetables is essential. Additionally, selecting probiotic fermentation microbiota and isolating beneficial probiotics from fermented vegetables can facilitate the use of safe and healthy starter cultures for large-scale industrial production. This review provides insights into the traditional fermentation process of making fermented vegetables, explains the mechanisms involved, and discusses the use of modern microbiome technologies to regulate fermentation microorganisms and create probiotic fermentation microbiota for the production of highly effective, wholesome, safe, and healthy fermented vegetable foods.

Taste Bud-Inspired Single-Drop Multitaste Sensing for Comprehensive Flavor Analysis with Deep Learning Algorithms

The electronic tongue (E-tongue) system has emerged as a significant innovation, aiming to replicate the complexity of human taste perception. In spite of the advancements in E-tongue technologies, two primary challenges remain to be addressed. First, evaluating the actual taste is complex due to interactions between taste and substances, such as synergistic and suppressive effects. Second, ensuring reliable outcomes in dynamic conditions, particularly when faced with high deviation error data, presents a significant challenge. The present study introduces a bioinspired artificial E-tongue system that mimics the gustatory system by integrating multiple arrays of taste sensors to emulate taste buds in the human tongue and incorporating a customized deep-learning algorithm for taste interpretation. The developed E-tongue system is capable of detecting four distinct tastes in a single drop of dietary compounds, such as saltiness, sourness, astringency, and sweetness, demonstrating notable reversibility and selectivity. The taste profiles of six different wines are obtained by the E-tongue system and demonstrated similarities in taste trends between the E-tongue system and user reviews from online, although some disparities still exist. To mitigate these disparities, a prototype-based classifier with soft voting is devised and implemented for the artificial E-tongue system. The artificial E-tongue system achieved a high classification accuracy of ∼95% in distinguishing among six different wines and ∼90% accuracy even in an environment where more than 1/3 of the data contained errors. Moreover, by harnessing the capabilities of deep learning technology, a recommendation system was demonstrated to enhance the user experience.

Juice Quality Evaluation with Multisensor Systems-A Review

E-nose and e-tongue are advanced technologies that allow for the fast and precise analysis of smells and flavours using special sensors. Both technologies are widely used, especially in the food industry, where they are implemented, e.g., for identifying ingredients and product quality, detecting contamination, and assessing their stability and shelf life. Therefore, the aim of this article is to provide a comprehensive review of the application of e-nose and e-tongue in various industries, focusing in particular on the use of these technologies in the fruit and vegetable juice industry. For this purpose, an analysis of research carried out worldwide over the last five years, concerning the possibility of using the considered multisensory systems to test the quality and taste and aroma profiles of juices is included. In addition, the review contains a brief characterization of these innovative devices through information such as their origin, mode of operation, types, advantages and disadvantages, challenges and perspectives, as well as the possibility of their applications in other industries besides the juice industry.

Volatile Organic Compound Detection by Graphene Field-Effect Transistors Functionalized with Fly Olfactory Receptor Mimetic Peptides

An olfactory receptor mimetic peptide-modified graphene field-effect transistor (gFET) is a promising solution to overcome the principal challenge of low specificity graphene-based sensors for volatile organic compound (VOC) sensing. Herein, peptides mimicking a fruit fly olfactory receptor, OR19a, were designed by a high-throughput analysis method that combines a peptide array and gas chromatography for the sensitive and selective gFET detection of the signature citrus VOC, limonene. The peptide probe was bifunctionalized via linkage of a graphene-binding peptide to facilitate one-step self-assembly on the sensor surface. The limonene-specific peptide probe successfully achieved highly sensitive and selective detection of limonene by gFET, with a detection range of 8-1000 pM, while achieving facile sensor functionalization. Taken together, our target-specific peptide selection and functionalization strategy of a gFET sensor demonstrates advancement of a precise VOC detection system.

Combining e-nose and e-tongue for improved recognition of instant starch noodles seasonings

Seasonings play a key role in determining sensory attributes of instant starch noodles. Controlling and improving the quality of seasoning is becoming important. In this study, five different brands along with fifteen instant starch noodles seasonings (seasoning powder, seasoning mixture sauce and the mixture of powder and sauce) were characterized by electronic nose (e-nose) and electronic tongue (e-tongue). Feature-level fusion for the integration of the signals was introduced to integrate the e-nose and e-tongue signals, aiming at improving the performances of identification and prediction models. Principal component analysis (PCA) explained over 85.00% of the total variance in e-nose data and e-tongue data, discriminated all samples. Multilayer perceptron neural networks analysis (MLPN) modeling demonstrated that the identification rate of the combined data was basically 100%. PCA, cluster analysis (CA), and MLPN proved that the classification results acquired from the combined e-nose and e-tongue data were better than individual e-nose and e-tongue result. This work demonstrated that in combination e-nose and e-tongue provided more comprehensive information about the seasonings compared to each individual e-nose and e-tongue. E-nose and e-tongue technologies hold great potential in the production, quality control, and flavor detection of instant starch noodles seasonings.

Changes in Protein Degradation and Non-Volatile Flavor Substances of Swimming Crab (Portunus trituberculatus) during Steaming

To investigate the effect of steaming time (0, 5, 10, 15, 20, and 25 min) on the protein degradation and non-volatile flavor substances of swimming crab (Portunus trituberculatus), the moisture content, total nitrogen (TN), non-protein nitrogen (NPN), free amino acids (FAAs), flavor nucleotides, electronic tongue analysis, and sensory evaluation were determined. The results showed that the contents of NPN and total FAAs were the highest after crabs steamed for 10 min. Meanwhile, the AMP (adenosine monophosphate) content reached the maximum value (332.83 mg/100 g) and the taste active value (TAV) reached 6.67, which indicated that AMP contributes the most to the taste of steamed crab at 10 min. The electronic tongue distinguished the taste difference well, and the sensory score was the highest at 15 min. Combined with equivalent umami concentration (EUC) and TAV value, swimming crab (weight = 200 ± 20 g) steamed for 10–15 min tasted best.

Comparative analysis of volatile organic compounds of breath and urine for distinguishing patients with liver cirrhosis from healthy controls by using electronic nose and voltammetric electronic tongue

Advanced stage detection of liver cirrhosis (LCi) would lead to high mortality rates in patients. Therefore, accurate and non-invasive tools for its early detection are highly needed using human emanations that may reflect this disease. Human breath, along with urine and blood, has long been one of the three main biological media for assessing human health and environmental exposure. The primary objective of this study was to explore the potential of using volatile organic compounds (VOCs) assay of exhaled breath and urine samples for the diagnosis of patients with LCi and healthy controls (HC). For this purpose, we used a hybrid electronic nose (E-nose) combining two sensor families, consisting of an array of five commercial chemical gas sensors and six interdigitated chemical gas sensors based on pristine or metal-doped WO₃ nanowires for sensing volatile gases in exhaled breath. A voltammetric electronic tongue (VE-tongue), composed of five working electrodes, was dedicated to the analysis of urinary VOCs using cyclic voltammetry as a measurement technique. 54 patients were recruited for this study, comprising 22 patients with LCi, and 32 HC. The two-sensing systems coupled with pattern recognition methods, namely Principal Component Analysis (PCA) and Discriminant Function Analysis (DFA), were trained to classify data clusters associated with the health status of the two groups. The diagnostic performances of the E-nose and VE-tongue systems were studied by using the receiver operating characteristic (ROC) method. The use of the E-nose or the VE-tongue separately, trained with these appropriate classifiers, showed a slight overlap indicating no clear discrimination between LCi patients and HC. To improve the performance of both electronic sensing devices, an emerging strategy, namely a multi-sensor data fusion technique, was proposed as a second aim to overcome this shortcoming. The data fusion approach of the two systems, at a medium level of abstraction, has demonstrated the ability to assess human health and disease status using non-invasive screening tools based on exhaled breath and urinary VOC analysis. This suggests that exhaled breath as well as urinary VOCs are specific to a disease state and could potentially be used as diagnostic methods.

A Machine Learning Method for the Fine-Grained Classification of Green Tea with Geographical Indication Using a MOS-Based Electronic Nose

Chinese green tea is known for its health-functional properties. There are many green tea categories, which have sub-categories with geographical indications (GTSGI). Several high-quality GTSGI planted in specific areas are labeled as famous GTSGI (FGTSGI) and are expensive. However, the subtle differences between the categories complicate the fine-grained classification of the GTSGI. This study proposes a novel framework consisting of a convolutional neural network backbone (CNN backbone) and a support vector machine classifier (SVM classifier), namely, CNN-SVM for the classification of Maofeng green tea categories (six sub-categories) and Maojian green tea categories (six sub-categories) using electronic nose data. A multi-channel input matrix was constructed for the CNN backbone to extract deep features from different sensor signals. An SVM classifier was employed to improve the classification performance due to its high discrimination ability for small sample sizes. The effectiveness of this framework was verified by comparing it with four other machine learning models (SVM, CNN-Shi, CNN-SVM-Shi, and CNN). The proposed framework had the best performance for classifying the GTSGI and identifying the FGTSGI. The high accuracy and strong robustness of the CNN-SVM show its potential for the fine-grained classification of multiple highly similar teas.

Standardized Extraction Techniques for Meat Analysis with the Electronic Tongue: A Case Study of Poultry and Red Meat Adulteration

The electronic tongue (e-tongue) is an advanced sensor-based device capable of detecting low concentration differences in solutions. It could have unparalleled advantages for meat quality control, but the challenges of standardized meat extraction methods represent a backdrop that has led to its scanty application in the meat industry. This study aimed to determine the optimal dilution level of meat extract for e-tongue evaluations and also to develop three standardized meat extraction methods. For practicality, the developed methods were applied to detect low levels of meat adulteration using beef and pork mixtures and turkey and chicken mixtures as case studies. Dilution factor of 1% w/v of liquid meat extract was determined to be the optimum for discriminating 1% w/w, 3% w/w, 5% w/w, 10% w/w, and 20% w/w chicken in turkey and pork in beef with linear discriminant analysis accuracies (LDA) of 78.13% (recognition) and 64.73% (validation). Even higher LDA accuracies of 89.62% (recognition) and 68.77% (validation) were achieved for discriminating 1% w/w, 3% w/w, 5% w/w, 10% w/w, and 20% w/w of pork in beef. Partial least square models could predict both sets of meat mixtures with good accuracies. Extraction by cooking was the best method for discriminating meat mixtures and can be applied for meat quality evaluations with the e-tongue.

Chemical Characteristics of Three Kinds of Japanese Soy Sauce Based on Electronic Senses and GC-MS Analyses

Japanese soy sauce has become more acceptable by Chinese consumers due to its umami taste. However, the volatile flavor compounds and taste characters have not been fully clarified. This study aimed to explore the flavor characteristics of three kinds of Japanese soy sauce, including Koikuchi Shoyu, Usukuchi Shoyu, and Amakuchi Shoyu. The secret of volatile flavor substances was investigated by Gas Chromatography-Mass Spectrometry (GC-MS) and electronic nose, while taste compounds were investigated by silylation GC-MS and electronic tongue (E-tongue). A total of 173 volatile flavor substances and 160 taste compounds were identified. In addition, 28 aroma compounds with odor activity values (OAV) ≥ 1 were considered as the typical flavors. We found that alcohols and aldehydes were in high abundance in Japanese soy sauce, but only a small portion of pyrazines and esters were. Based on electronic nose and GC-MS analysis, Koikuchi Shoyu gives more contribution to aroma compounds, while Usukuchi Shoyu and Amakuchi Shoyu give the sourness and sweetness features based on E-tongue and silylation GC-MS analysis. In this study, 50 kinds of sugars were detected that contributed to the sweetness of soy sauce. This study will provide new insight into the flavor characteristics of Japanese soy sauce that potentially contribute to the innovation and development of soy sauce.

Pretreatment methods affecting the color, flavor, bioactive compounds, and antioxidant activity of jujube wine

In the case of wine production, the selection of optimal pretreatment methods and starter cultures are the 2 key points before fermentation. In this research, the fresh jujube was separately underwent alcoholic fermentation at 20°C with 3 different pretreatment methods (with peel, without peel, and juice) and 5 different starter cultures, respectively. Color analysis, electronic sense analysis, bioactive compound analysis, and antioxidant activity analysis combined with multivariate statistical analysis were applied to evaluated the effects of pretreatment methods and starter cultures on the overall quality of jujube wine. It was found that both pretreatment methods and starter cultures have effects on the quality of jujube wines, in which pretreatment methods have much more significant effects. The jujube wines fermented with different pretreatment methods were classified clearly by their overall quality, and that of the jujube wines fermented with peel was the best among all, since it can not only enhance the color and flavor quality of the wine, but also maximize the preservation of bioactive compounds and antioxidant activity of jujube for better consumer acceptance. This will provide a theoretical reference and application basis for the quality improvement of jujube wine.

Collaborative Analysis on the Marked Ages of Rice Wines by Electronic Tongue and Nose based on Different Feature Data Sets

Aroma and taste are the most important attributes of alcoholic beverages. In the study, the self-developed electronic tongue (e-tongue) and electronic nose (e-nose) were used for evaluating the marked ages of rice wines. Six types of feature data sets (e-tongue data set, e-nose data set, direct-fusion data set, weighted-fusion data set, optimized direct-fusion data set, and optimized weighted-fusion data set) were used for identifying rice wines with different wine ages. Pearson coefficient analysis and variance inflation factor (VIF) analysis were used to optimize the fusion matrixes by removing the multicollinear information. Two types of discrimination methods (principal component analysis (PCA) and locality preserving projections (LPP)) were used for classifying rice wines, and LPP performed better than PCA in the discrimination work. The best result was obtained by LPP based on the weighted-fusion data set, and all the samples could be classified clearly in the LPP plot. Therefore, the weighted-fusion data were used as independent variables of partial least squares regression, extreme learning machine, and support vector machines (LIBSVM) for evaluating wine ages, respectively. All the methods performed well with good prediction results, and LIBSVM presented the best correlation coefficient (R² ≥ 0.9998).

Fuzzy Evaluation Output of Taste Information for Liquor Using Electronic Tongue Based on Cloud Model

As a taste bionic system, electronic tongues can be used to derive taste information for different types of food. On this basis, we have carried forward the work by making it, in addition to the ability of accurately distinguish samples, be more expressive by speaking evaluative language like human beings. Thus, this paper demonstrates the correlation between the qualitative digital output of the taste bionic system and the fuzzy evaluation language that conform to the human perception mode. First, through principal component analysis (PCA), backward cloud generator and forward cloud generator, two-dimensional cloud droplet groups of different flavor information were established by using liquor taste data collected by electronic tongue. Second, the frequency and order of the evaluation words for different flavor of liquor were obtained by counting and analyzing the data appeared in the artificial sensory evaluation experiment. According to the frequency and order of words, the cloud droplet range corresponding to each word was calculated in the cloud drop group. Finally, the fuzzy evaluations that originated from the eight groups of liquor data with different flavor were compared with the artificial sense, and the results indicated that the model developed in this work is capable of outputting fuzzy evaluation that is consistent with human perception rather than digital output. To sum up, this method enabled the electronic tongue system to generate an output, which conforms to human's descriptive language, making food detection technology a step closer to human perception.

Classification and Identification of Industrial Gases Based on Electronic Nose Technology

Rapid detection and identification of industrial gases is a challenging problem. They have a complex composition and different specifications. This paper presents a method based on the kernel discriminant analysis (KDA) algorithm to identify industrial gases. The smell prints of four typical industrial gases were collected by an electronic nose. The extracted features of the collected gases were employed for gas identification using different classification algorithms, including principal component analysis (PCA), linear discriminant analysis (LDA), PCA + LDA, and KDA. In order to obtain better classification results, we reduced the dimensions of the original high-dimensional data, and chose a good classifier. The KDA algorithm provided a high classification accuracy of 100% by selecting the offset of the kernel function c = 10 and the degree of freedom d = 5. It was found that this accuracy was 4.17% higher than the one obtained using PCA. In the case of standard deviation, the KDA algorithm has the highest recognition rate and the least time consumption.

A Novel Subspace Alignment-Based Interference Suppression Method for the Transfer Caused by Different Sample Carriers in Electronic Nose

A medical electronic nose (e-nose) with 31 gas sensors is used for wound infection detection by analyzing the bacterial metabolites. In practical applications, the prediction accuracy drops dramatically when the prediction model established by laboratory data is directly used in human clinical samples. This is a key issue for medical e-nose which should be more worthy of attention. The host (carrier) of bacteria can be the culture solution, the animal wound, or the human wound. As well, the bacterial culture solution or animals (such as: mice, rabbits, etc.) obtained easily are usually used as experimental subjects to collect sufficient sensor array data to establish the robust predictive model, but it brings another serious interference problem at the same time. Different carriers have different background interferences, therefore the distribution of data collected under different carriers is different, which will make a certain impact on the recognition accuracy in the detection of human wound infection. This type of interference problem is called "transfer caused by different sample carriers". In this paper, a novel subspace alignment-based interference suppression (SAIS) method with domain correction capability is proposed to solve this interference problem. The subspace is the part of space whose dimension is smaller than the whole space, and it has some specific properties. In this method, first the subspaces of different data domains are gotten, and then one subspace is aligned to another subspace, thereby the problem of different distributions between two domains is solved. From experimental results, it can be found that the recognition accuracy of the infected rat samples increases from 29.18% (there is no interference suppression) to 82.55% (interference suppress by SAIS).

Volatile flavour components and the mechanisms underlying their production in golden pompano (Trachinotus blochii) fillets subjected to different drying methods: A comparative study using an electronic nose, an electronic tongue and SDE-GC-MS

The impacts of the vacuum freeze (VFD), hot air (HAD), microwave (MD) and vacuum microwave (VMD) drying on the flavour of golden pompano fillets were evaluated using an electronic nose (E-nose), an electronic tongue (E-tongue) and simultaneous distillation extraction (SDE) - gas chromatography - mass spectrometry (GC-MS). The results showed that the E-nose and E-tongue systems could effectively differentiate volatile compounds of four samples. A total of 86 volatile flavour components were identified in the dried fillets; the main flavour components contained hydrocarbons (39), aldehydes (15), esters (10) and alcohols (9). HAD, MD and VMD processing promoted a gradual reduction in ketones and the generation of esters, while the fillets that were processed by VFD contained more hydrocarbon (29.68%) and alcohol (2.64%) compounds. The volatile compounds of dried golden pompano fillets were developed through four potential pathways, including the Maillard reaction, lipid oxidation and degradation, protein hydrolysis, and Strecker degradation.

Combination of an E-Nose and an E-Tongue for Adulteration Detection of Minced Mutton Mixed with Pork

An E-panel, comprising an electronic nose (E-nose) and an electronic tongue (E-tongue), was used to distinguish the organoleptic characteristics of minced mutton adulterated with different proportions of pork. Meanwhile, the normalization, stepwise linear discriminant analysis (step-LDA), and principle component analysis were employed to merge the data matrix of E-nose and E-tongue. The discrimination results were evaluated and compared by canonical discriminant analysis (CDA) and Bayesian discriminant analysis (BAD). It was shown that the capability of discrimination of the combined system (classification error 0%∼1.67%) was superior or equable to that obtained with the two instruments separately, and E-tongue system (classification error for E-tongue 0∼2.5%) obtained higher accuracy than E-nose (classification error 0.83%∼10.83% for E-nose). For the combined system, the combination of extracted data of 6 PCs of E-nose and 5 PCs of E-tongue was proved to be the most effective method. In order to predict the pork proportion in adulterated mutton, multiple linear regression (MLR), partial least square analysis (PLS), and backpropagation neural network (BPNN) regression models were used, and the results were compared, aiming at building effective predictive models. Good correlations were found between the signals obtained from E-tongue, E-nose, and fusion data of E-nose and E-tongue and proportions of pork in minced mutton with correlation coefficients higher than 0.90 in the calibration and validation data sets. And BPNN was proved to be the most effective method for the prediction of pork proportions with R2 higher than 0.97 both for the calibration and validation data set. These results indicated that integration of E-nose and E-tongue could be a useful tool for the detection of mutton adulteration.

Electronic Nose-Based Technique for Rapid Detection and Recognition of Moldy Apples

In this study, the PEN3 electronic nose was used to detect and recognize fresh and moldy apples inoculated with Penicillium expansum and Aspergillus niger, taking Golden Delicious apples as the model subject. Firstly, the apples were divided into two groups: individual apple inoculated only with/without different molds (Group A) and mixed apples of inoculated apples with fresh apples (Group B). Then, the characteristic gas sensors of the PEN3 electronic nose that were most closely correlated with the flavor information of the moldy apples were optimized and determined to simplify the analysis process and improve the accuracy of the results. Four pattern recognition methods, including linear discriminant analysis (LDA), backpropagation neural network (BPNN), support vector machines (SVM), and radial basis function neural network (RBFNN), were applied to analyze the data obtained from the characteristic sensors, aiming at establishing the prediction model of the flavor information and fresh/moldy apples. The results showed that only the gas sensors of W1S, W2S, W5S, W1W, and W2W in the PEN3 electronic nose exhibited a strong signal response to the flavor information, indicating most were closely correlated with the characteristic flavor of apples and thus the data obtained from these characteristic sensors were used for modeling. The results of the four pattern recognition methods showed that BPNN had the best prediction performance for the training and testing sets for both Groups A and B, with prediction accuracies of 96.3% and 90.0% (Group A), 77.7% and 72.0% (Group B), respectively. Therefore, we demonstrate that the PEN3 electronic nose not only effectively detects and recognizes fresh and moldy apples, but also can distinguish apples inoculated with different molds.

Bionic Electronic Nose Based on MOS Sensors Array and Machine Learning Algorithms Used for Wine Properties Detection

In this study, a portable electronic nose (E-nose) prototype is developed using metal oxide semiconductor (MOS) sensors to detect odors of different wines. Odor detection facilitates the distinction of wines with different properties, including areas of production, vintage years, fermentation processes, and varietals. Four popular machine learning algorithms—extreme gradient boosting (XGBoost), random forest (RF), support vector machine (SVM), and backpropagation neural network (BPNN)—were used to build identification models for different classification tasks. Experimental results show that BPNN achieved the best performance, with accuracies of 94% and 92.5% in identifying production areas and varietals, respectively; and SVM achieved the best performance in identifying vintages and fermentation processes, with accuracies of 67.3% and 60.5%, respectively. Results demonstrate the effectiveness of the developed E-nose, which could be used to distinguish different wines based on their properties following selection of an optimal algorithm.

Novel analytical method for detection of orange juice adulteration based on ultra-fast gas chromatography

ABSTRACT

The food authenticity assessment is an increasingly important issue in food quality and safety. The application of an electronic nose based on ultra-fast gas chromatography technique enables rapid analysis of the volatile compounds from food samples. Due to the fact that this technique provides chemical profiling of natural products, it can be a powerful tool for authentication in combination with chemometrics. In this article, a methodology for classification of Not From Concentrate (NFC) juices was presented. During research samples of 100% orange juice, 100% apple juice, as well as mixtures of these juices with known percentage of base juices were tested. Classification of juice samples was carried out using unsupervised and supervised statistical methods. As chemometric methods, Hierarchical Cluster Analysis, Classification Tree, Naïve Bayes, Neural Network, and Random Forest classifiers were used. The ultra-fast GC technique coupled with supervised statistical methods allowed to distinguish juice samples containing only 1.0% of impurities. The developed methodology is a promising analytical tool to ensure the authenticity and good quality of juices.

GRAPHICAL ABSTRACT

Solid-Contact Potentiometric Sensors and Multisensors Based on Polyaniline and Thiacalixarene Receptors for the Analysis of Some Beverages and Alcoholic Drinks

Electronic tongue is a sensor array that aims to discriminate and analyze complex media like food and beverages on the base of chemometrics approaches for data mining and pattern recognition. In this review, the concept of electronic tongue comprising of solid-contact potentiometric sensors with polyaniline and thacalix[4]arene derivatives is described. The electrochemical reactions of polyaniline as a background of solid-contact sensors and the characteristics of thiacalixarenes and pillararenes as neutral ionophores are briefly considered. The electronic tongue systems described were successfully applied for assessment of fruit juices, green tea, beer, and alcoholic drinks They were classified in accordance with the origination, brands and styles. Variation of the sensor response resulted from the reactions between Fe(III) ions added and sample components, i.e., antioxidants and complexing agents. The use of principal component analysis and discriminant analysis is shown for multisensor signal treatment and visualization. The discrimination conditions can be optimized by variation of the ionophores, Fe(III) concentration, and sample dilution. The results obtained were compared with other electronic tongue systems reported for the same subjects.

An overview of an artificial nose system

The present review describes recent advances in the development of an artificial nose system based on olfactory receptors and various sensing platforms. The kind of artificial nose, the production of olfactory receptors, the sensor platform for signal conversion and the application of the artificial nose system based on olfactory receptors and various sensing platforms are presented. The associated transduction modes are also discussed. The paper presents a review of the latest achievements and a critical evaluation of the state of the art in the field of artificial nose systems.