Dispersive solid-phase extraction followed by high-performance liquid chromatography/tandem mass spectrometry for the determination of ricinine in cooking oil

Fate, transport, and plant uptake of ricinine in soils amended with castor cake organic fertilizer

The toxic alkaloid ricinine in castor cake organic fertilizers poses significant risks to groundwater and crop safety due to its potential for downward transport and plant uptake following land application. However, its environmental behavior remains insufficiently studied. To address this gap, a modified QuEChERS-based method coupled with LC-QTOF/MS was developed and validated, achieving recovery rates of 74.0-93.3 % and detection limits of 0.01-0.32 µg kg-1 for ricinine in castor cake, soils, and lettuce. Soil pot experiments investigated the fate, transport, and plant uptake of ricinine using two loam soils amended with castor cake fertilizers. Pot leaching experiments demonstrated ricinine's high mobility, with ricinine either leaching directly into water or converting to metabolites like N-demethyl-ricinine before transport. Ricinine concentrations in leachate, soil pore water, and soil solid phases decreased over time, with 5.1-40.6 % of the initial ricinine remaining after 14 days. Pot-cultivation experiments confirmed lettuce uptake of ricinine and its metabolite, with accumulation increasing at higher castor cake application rates, reaching up to 7.6 µg and 10.0 µg, respectively, and higher concentrations in shoots than roots. These results highlight ricinine's potential to contaminate agroecosystems, stressing the need for regulatory measures and effective management strategies to ensure food safety.

Applications of metal organic frameworks in dispersive micro solid phase extraction (D-μ-SPE)

Metal-organic frameworks (MOFs) are a fascinating family of crystalline porous materials made up of metal clusters and organic linkers. In comparison with other porous materials, MOFs have unique characteristics including high surface area, homogeneous open cavities, and permanent high porosity with variable shapes and sizes. For these reasons, MOFs have recently been explored as sorbents in sample preparation by solid-phase extraction (SPE). However, SPE requires large amounts of sorbents and suffers from limited contact surfaces with analytes, which compromises extraction recovery and efficiency. Dispersive SPE (D-SPE) overcomes these limitations by dispersing the sorbents into the sample, which in turn increases contact with the analytes. Miniaturization of the microextraction procedure, particularly the amount of sorbent reduces the amount consumed of the organic solvent and shorten the time required to attain the equilibrium state. This may explain the reported high efficiency and applicability of MOFs in dispersive micro SPE (D-µ-SPE). This method retains all the advantages of solid phase extraction while also being simpler, faster, cheaper, and, in some cases, more effective in comparison with D-SPE. Besides, D-µ-SPE requires smaller amounts of the sorbents which reduces the overall cost, and the amount of waste generated from the analytical process. In this review, we discuss the applications of MOFs in D-µ-SPE of various analytes including pharmaceuticals, pesticides, organic dyes from miscellaneous matrices including water samples, biological samples and food samples.

Magnetic Ionic Liquids in Sample Preparation: Recent Advances and Future Trends

In the last decades, a myriad of materials has been synthesized and utilized for the development of sample preparation procedures. The use of their magnetic analogues has gained significant attention and many procedures have been developed using magnetic materials. In this context, the benefits of a new class of magnetic ionic liquids (MILs), as non-conventional solvents, have been reaped in sample preparation procedures. MILs combine the advantageous properties of ionic liquids along with the magnetic properties, creating an unsurpassed combination. Owing to their unique nature and inherent benefits, the number of published reports on sample preparation with MILs is increasing. This fact, along with the many different types of extraction procedures that are developed, suggests that this is a promising field of research. Advances in the field are achieved both by developing new MILs with better properties (showing either stronger response to external magnetic fields or tunable extractive properties) and by developing and/or combining methods, resulting in advanced ones. In this advancing field of research, a good understanding of the existing literature is needed. This review aims to provide a literature update on the current trends of MILs in different modes of sample preparation, along with the current limitations and the prospects of the field. The use of MILs in dispersive liquid–liquid microextraction, single drop microextraction, matrix solid-phase dispersion, etc., is discussed herein among others.

Facile dispersive solid-phase extraction based on humic acid for the determination of aflatoxins in various edible oils

Aflatoxins (AFs), as the secondary metabolites of the toxigenic fungi Aspergillus flavus and Aspergillus parasiticus, are well known to be extremely harmful to humans and animals because of their high toxicity, mutagenicity, carcinogenicity, and teratogenicity. Recurring and increasing studies on AF ingestion incidents indicate that AF contamination is a serious food safety issue worldwide. Currently, immunoaffinity chromatography (IAC) has become the most conventional sample clean-up method for determining AFs in foodstuffs. However, the IAC method may be limited to some laboratories because it requires the use of expensive disposable cartridges and the IA procedure is time-consuming. Herein, to achieve the cost-effective determination of AFs in edible oils, we developed a dispersive solid-phase extraction (DSPE) clean-up method based on humic acids (HAs), which is followed by liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) analysis. HAs could be directly used as a DSPE sorbent after simple treatment without any chemical modification. In the HA-DSPE, AFs could remain on the HA sorbent by both hydrophobic and hydrophilic interactions, whereas the oil matrix was retained on HA via only hydrophobic interactions. The oil matrix could be sufficiently washed off by n-hexane, whereas the AFs could still be retained on HA; thus, the selective extraction of AFs and clean-up of oil matrices were achieved. Under the optimal conditions of HA-DSPE, satisfactory recoveries ranging from 81.3% to 106.2% for four AFs (B1, B2, G1, and G2) were achieved in various oil matrices i.e. blended oil, mixed olive oil, tea oil, sunflower seed oil, rapeseed oil, sesame oil, soybean oil, rice oil, corn oil, and peanut oil. Minor matrix effects ranging from 89.3% to 112.9% were obtained for the four AFs, which were acceptable. Moreover, the LODs of AFs between 0.063 and 0.102 μg kg-1 completely meet the regulatory levels fixed by the Food and Drug Administration (FDA), the European Union (EU), China, or other countries. The proposed methodology was further validated using a naturally contaminated peanut oil, and the results indicated that the accuracy of the HA-DSPE could match the accuracy of the referenced IAC. In addition, HA-DSPE can be used to directly treat diluted edible oil without liquid-liquid extraction and HA is cheap and can be easily obtained from the market worldwide; these advantages make the proposed methodology simple, low-cost, and accessible for the determination of AFs in edible oils.

Magnetic-Dispersive Solid Phase Extraction Based on Graphene Oxide-Fe3O4 Nanocomposites Followed by High Performance Liquid Chromatography-Fluorescence for the Preconcentration and Determination of Terazosin Hydrochloride in Human Plasma

In the present study, a facile modified impregnation method was employed to synthesize superparamagnetic graphene oxide-Fe3O4 (GO-Fe3O4) nanocomposites. Based on the GO-Fe3O4 as adsorbent, a simple and fast magnetic-dispersive solid phase extraction followed by high performance liquid chromatography with fluorescence detection (M-dSPE-HPLC-FL) method was established and validated for the preconcentration and determination of terazosin hydrochloride (TRZ) in human plasma samples. The obtained nanomaterials were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy and vibrating sample magnetometry. Different parameters affecting the extraction efficiency, such as sample pH, amount of sorbent, extraction time, elution solvent and its volume and desorption time, were evaluated and optimized. The linearity of the proposed method was excellent over the range 0.3-50.0 ng mL-1 with an acceptable coefficient of determination (R2 = 0.9989). The limit of quantification and limit of detection were found to be 0.3 and 0.09 ng mL-1, respectively, and the preconcentration factor of 10 was achieved. Intra- and inter-day precision expressed as relative standard deviation (RSD %, n = 6) were between 2.2-3.8% and 4.7-6.4%, respectively. Accuracy, estimated by recovery assays, was 97.7-106.6% with RSD ≤ 5.2%. Ultimately, the applicability of the method was successfully confirmed by the extraction and determination of TRZ in human plasma samples.

Microwave-Assisted Extraction of Ricinine from Ricinus communis Leaves

The alkaloid ricinine (3-cyano-4-methoxy-N-methyl-2-pyridone) is found in different parts of the Ricinus communis plant and is known to possess several bioactive properties, including strong antioxidant activity. In this study, a new microwave-assisted extraction (MAE) method was developed for the recovery of ricinine from R. communis leaves. The extraction variables studied were extraction temperature (between 125 °C and 175 °C), microwave power (between 500 W and 1000 W), extraction time (between 5 min and 15 min), extraction solvent (between 10% and 90% of EtOAc in MeOH), and solvent-to-sample ratio (between 25:1 mL and 50:1 mL of solvent per gram of the sample). On studying the effects of extraction variables, both solvent and liquid-to-solid ratio were found to exhibit the highest effects on ricinine recovery. A fast (15 min) microwave-assisted extraction method was developed (high temperatures can be applied because the stability of ricinine is proven in the literature), allowing for the recovery of ricinine from R. communis leaves. The study revealed that R. communis leaves had almost 1.5 mg g⁻¹ (dried weight) of ricinine.

Vortex-assisted deep eutectic solvent reversed-phase liquid-liquid microextraction of triazine herbicides in edible vegetable oils

In this study, four triazine herbicides-namely, simazine, ametryn, prometryn and terbuthylazine-were separated and determined using high-performance liquid chromatography coupled with ultraviolet detector (HPLC-UVD). The deep eutectic solvent (DES) formed by tetrabutylammonium chloride ([N₄₄₄₄]Cl, TBA) and ethylene glycol (EG) was selected as the extraction solvent of vortex-assisted reversed-phase liquid-liquid microextraction (VA-RPLLME). The application of the hydrophilic DES expands the range of choice for LLME. The experimental parameters affecting the extraction recoveries, including the amount of the DES, the sample volume and the vortex time, were investigated and optimized by the design of experiments (DoE) methodology. A quadratic model, namely central composite face-centered (CCF) design featuring 20 runs was used instead of the conventional trial and error approach. Under optimum conditions, the limits of determination (LODs) of the method were 0.60-1.50 μg L^-1. The enrichment factors for the analytes ranged from 27 to 31. The extraction recoveries were in the range of 84.1-104.9%, and the intra-day, inter-day and intermediate relative standard deviations (RSDs) were less than 8.4%. Finally, the method was applied for the determination of triazine herbicides in vegetable oil samples. The obtained recoveries were in the range of 60.1-107.2% and RSDs were lower than 8.1%. In general, VA-RPLLME can be complementary to the present available methods for the determination of triazine herbicides in vegetable oil samples.

Superparamagnetic graphene oxide-based dispersive-solid phase extraction for preconcentration and determination of tamsulosin hydrochloride in human plasma by high performance liquid chromatography-ultraviolet detection

In the present study, superparamagnetic graphene oxide-Fe₃O₄ nanocomposites were successfully prepared by a modified impregnation method (MGO_mi) and their application as a sorbent in the magnetic-dispersive solid phase extraction (M-dSPE) mode to the preconcentration and determination of tamsulosin hydrochloride (TMS) in human plasma was investigated by coupling with high performance liquid chromatography-ultraviolet detection (HPLC-UV). The structure, morphology and magnetic properties of the prepared nanocomposites were characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and vibrating sample magnetometry (VSM). Some factors affecting the extraction efficiency, including the pH value, amount of sorbent, extraction time, elution solvent and its volume, and desorption time were studied and optimized. Magnetic nanocomposites plasma extraction of TMS following HPLC analyses showed a linear calibration curve in the range of 0.5-50.0ngmL^-1 with an acceptable correlation coefficient (R²=0.9988). The method was sensitive, with a low limit of detection (0.17ngmL^-1) and quantification (0.48ngmL^-1). Inter- and intra-day precision expressed as relative standard deviation (n=3) and the preconcentration factor, were found to be 5.6-7.2%, 2.9-4.2% and 10, respectively. Good recoveries (98.1-101.4%) with low relative standard deviations (4.2-5.0%) indicated that the matrices under consideration do not significantly affect the extraction process. Due to its high precision and accuracy, the developed method may be a HPLC-UV alternative with M-dSPE for bioequivalence analysis of TMS in human plasma.

Solid phase extraction of doxorubicin using molecularly imprinted polymer coated magnetite nanospheres prior to its spectrofluorometric determination

Selective doxorubicin-imprinted polymer coated magnetite nanospheres were synthesized.