Sorption of 4-ethylphenol and 4-ethylguaiacol by suberin from cork

Simultaneous determination of 4-ethylphenol and 4-ethylguaicol on C60 modified dual screen-printed electrochemical sensors

4-ethylphenol and 4-ethylguaicol levels in wine are associated to organoleptic defects that cause consumer rejection accompanied by significant economic losses for producers. Thus, electrochemical sensors based on screen-printed carbon electrodes (SPCEs) modified with activated fullerene C60 (AC60) have been developed for the analysis of both phenols by direct headspace amperometric measurements. Upon optimization of the experimental variables affecting the sensors performance, the AC60/SPCE sensors presented linearity ranges from 9.9 to 65.4 μg/L and from 19.6 to 107.1 μg/L for 4-ethylphenol and 4-ethylguaicol, respectively. The achieved detection capacities were 10.3 μg/L (4-ethylphenol) and 19.6 μg/L (4-ethylguaicol), with a reproducibility of 6.3 % and 9.1 % (n = 3), respectively. In addition, dual-working AC60/SPCE devices were developed for the simultaneous analysis of both phenols using different working potentials for each electrode. The dual systems were successfully applied in the analysis of different spiked wine samples, obtaining good recoveries ranging from 94 to 108 %.

A Review on Wine Flavour Profiles Altered by Bottle Aging

The wine flavour profile directly determines the overall quality of wine and changes significantly during bottle aging. Understanding the mechanism of flavour evolution during wine bottle aging is important for controlling wine quality through cellar management. This literature review summarises the changes in volatile compounds and non-volatile compounds that occur during wine bottle aging, discusses chemical reaction mechanisms, and outlines the factors that may affect this evolution. This review aims to provide a deeper understanding of bottle aging management and to identify the current literature gaps for future research.

New Insights on the Scalping Phenomenon of Volatile Sulphur Compounds on Micro-Agglomerated Wine Closures

Flavour scalping in wine is a well-known phenomenon that is defined as the sorption of flavour compounds on wine closures. While the impact of closure type was the object of several studies, no research has addressed the impact of wine closure permeability on flavour scalping. For that purpose, the adsorption of volatile sulphur compounds (VSCs) on four micro-agglomerated wine cork closures was investigated by soaking them in model and Shiraz wines for 7 days. From a kinetic point of view, most of the VSCs were quickly scalped after 1 h of soaking, and this effect increased after 6 h until reaching a plateau. Most importantly, no significant impact of the closure on the kinetics and adsorption rates of the VSCs was found. As to the quantitative aspects, VSC sorption on closures accounted for 1% to 5% of the initial VSCs present in the wines only, meaning that the impact was negligible under oenological conditions.

The dynamics of microbial community and flavor metabolites during the acetic acid fermentation of Hongqu aromatic vinegar

In this study, we investigated the dynamics of microbial community and flavor metabolites during the traditional fermentation of Hongqu aromatic vinegar (HAV) and subsequently explored the potential relationship between microbiota and flavor metabolites. The microbiome analysis based on high-throughput sequencing (HTS) of amplicons demonstrated that Lactobacillus, Acetobacter and Clostridium were the dominant bacterial genera, while Alternaria, Candida, Aspergillus and Issatchenkia were the dominant fungal genera during the acetic acid fermentation (AAF) of HAV. A total of 101 volatile flavor compounds were identified through gas chromatography-mass spectrometry (GC-MS) during HAV fermentation, including esters (35), alcohols (17), aldehydes (11), acids (11), ketones (7), phenols (10), and others (10). Redundancy analysis (RDA) was used to reveal the correlation between microbiota and volatile flavor compounds. Lactobacillus and Acetobacter were the two bacterial genera that have the great influence on the production of volatile flavor components in HAV. Among them, Lactobacillus was positively correlated with a variety of ethyl esters, while Acetobacter positively contributed to the formation of several organic acids. Furthermore, the non-volatile metabolites were detected by ultra-high-performance liquid chromatography with quadrupole time-of-flight mass spectrometry (UPLC-QTOF/MS). A total of 41 dipeptides were identified during HAV fermentation, and most of them may have sensory characteristics and biological activities. RDA showed that Aspergillus, Epicoccum, Issatchenkia, Candida and Malassezia were the most influential fungal genera on non-volatile metabolites. In particular, Epicoccum was first reported in Hongqu vinegar and showed a positive correlation with the production of various organic acids. In conclusion, this study provides a scientific basis for understanding the flavor generation mechanism of HAV, and may be valuable for developing effective techniques to select suitable strains to improve the flavor quality of HAV.

The Impact of Different Closures on the Flavor Composition of Wines during Bottle Aging

Wine flavor undergoes major changes during bottle aging and can be influenced by the type of closure. The interaction between wine, the type of closure and the external environment has the potential to significantly influence the overall quality of bottled wines, especially when the storage period is relatively long (more than five years). Therefore, the choice of closure (cork, synthetic or screw cap) deserves special attention in order to establish the ideal sealing conditions for optimizing wine flavor attributes. The contribution of different closures to the quality of bottled wine is through mass transfer phenomena, including permeation, sorption (scalping) or desorption of chemicals between closure materials and wines. Thus, this article aims to review the impact of different closures on the flavor composition of wines during post-bottling conditions. The implications of closures on wine sensory properties are also discussed.

New molecularly imprinted polymers for reducing negative volatile phenols in red wine with low impact on wine colour

4-Ethylphenol (4-EP) and 4-ethylguaiacol (4-EG) formation in red wines by Dekkera/Brettanomyces yeasts reduce significantly wine consumer's acceptability. Polymers with specific adsorption for volatile phenols (VPs) could be a valuable tool for wine producers for removing this negative sensory defect. In this work, a new molecularly imprinted polymer (MIP) was synthesised using ethylene glycol dimethacrylate (EDMA) as cross-linker and ethylene glycol methyl ether acrylate as functional monomers. Although there was observed a competitive binding of the more abundant structurally related phenolic compounds of the wine matrix, it was still able to reduce 38 to 63% the wine VPs, depending on the wine VPs levels, presenting higher performance than the respective non-imprinted polymers (NIP). Sensory analysis of the MIP treated wine resulted in a significant decrease in the phenolic attribute and significant increase of the fruity and floral attributes, with no significant differences in the wine colour perceived by the expert panel. The sensory improvement of the MIP was significantly higher than that observed for the correspondent NIP.

A photoresponsive molecularly imprinted polymer with rapid visible-light-induced photoswitching for 4-ethylphenol in red wine

The trans to cis isomerization of the azobenzene chromophore in most azobenzene-based photoresponsive molecularly imprinted polymers (MIPs) is initiated by UV irradiation. This limits the application of these materials in cases where UV light toxicity is an issue, such as in biological systems, food monitoring, and drug delivery. Herein we report a tetra-ortho-methyl substituted azobenzene, (4-[(4-methacryloyloxy)-2,6-dimethyl phenylazo]-3,5-dimethyl benzenesulfonic acid (MADPADSA). The photoswitching of MADPADSA could be induced by visible-light irradiation (550 nm for trans to cis and 475 nm for cis to trans) in 4-hydroxyethylpiperazineethanesulfonic acid (HEPES) buffer-ethanol (4:1, v/v) at pH 7.0, however, the photoisomerization was slow. With the use of MADPADSA as a functional monomer, NaYF₄:Yb³⁺,Er³⁺ as a substrate, 4-ethylphenol (4-EP) as a template, a novel photoresponsive surface molecularly imprinted polymer NaYF₄:Yb³⁺,Er³⁺@MIP was obtained. The NaYF₄:Yb³⁺,Er³⁺@MIP displayed rapid visible-light-induced photoswitching. The NaYF₄:Yb³⁺,Er³⁺ substrate could efficiently increase the trans to cis isomerization rate of the photoresponsive MIP on its surface, which was faster than that of the corresponding azobenzene monomer MADPADSA. Possible reasons for this effect were investigated by fluorescence spectroscopy. NaYF₄:Yb³⁺,Er³⁺@MIP displayed good specificity toward 4-EP with a specific binding constant (K_d) of 3.67 × 10^-6 mol L^-1 and an apparent maximum adsorption capacity (Q_max) of 10.73 μmol g^-1, respectively. NaYF₄:Yb³⁺,Er³⁺@MIP was applied to determine the concentration of 4-EP in red wine with good efficiency and a limit of detection lower than the value that could cause an unpleasant off-flavor.