Electrodeposition of gold nanoparticles and reduced graphene oxide on an electrode for fast and sensitive determination of methylmercury in fish

Laser-chemical composite manufacturing of biomimetic stepped armor functional metal surface with wear resistance and anti-icing characteristics

Superhydrophobic surfaces have been demonstrated to exhibit excellent anti-icing effects, but they are susceptible to the loss of ice repellency as a result of external impacts. This paper proposes a novel bionic armour structure that combines an armour structure with an arrowroot bionic structure. A composite method combining laser etching and chemical modification was employed to achieve superhydrophobicity on the surface of the aluminium alloy. Furthermore, superhydrophobic surfaces with distinctive microstructures were investigated. The findings demonstrated that the contact angles and rolling angles of the second-order armour structure following low surface energy modification reached 158.5° and 3.5°, respectively. Furthermore, the mechanical stability of the surface of the armour step structure was investigated through a sandpaper cyclic wear test. It was observed that conventional micro-cone arrays lost their superhydrophobicity after a single abrasion test, whereas structured superhydrophobic surfaces exhibited a loss of superhydrophobicity after eight abrasion cycle tests. Furthermore, the prepared surface was demonstrated to exhibit excellent anti-icing properties through the simulation and subsequent testing of the delayed icing time of liquid droplets on different surfaces. The icing time of the second-order armoured superhydrophobic surface was found to be 12 times longer than that of the polished aluminium alloy surface. The research presented in this thesis provides new insights into the fabrication of biomimetic superhydrophobic metal surfaces with both good mechanical stability and icing resistance.

Preparation of octyl-modified silica isoporous membrane for hydrophobic enrichment and electrochemical detection of methylmercury in aquatic products

Methylmercury (CH3Hg+), a lipophilic environmental pollutant, accumulates in fish, shellfish, and other organisms, posing significant risks to human health through the food chain. Developing a convenient and sensitive analytical method for CH3Hg+ detection is crucial for reducing costs and enhancing the efficiency of food safety testing. In this study, we prepared an octyl-modified silica isoporous membrane on the indium tin oxide (ITO) electrode (Octyl-SIM/ITO) via the electrochemical-assisted self-assembly (EASA) method using octyltrimethoxysilane (O-TES) as the functional organosilane. The Octyl-SIM/ITO electrode exhibits vertically-ordered nanochannels and strong hydrophobic affinity, enabling selective penetration and enrichment of weakly polar analytes. Utilizing square wave anodic stripping voltammetry (SWASV), the Octyl-SIM/ITO electrode demonstrates superior electrochemical response signals for CH3Hg+ detection, achieving a detection limit as low as 4 nM. This method allows for accurate and reproducible detection of CH3Hg+ in fish and oyster samples with minimal sample preparation, offering promising potential for portable in situ detection.

Noble metal/metal-organic framework nanoparticle-based electrochemical sensors for evaluating fish quality: a comprehensive review

Fish quality is a big-picture issue because of the possible presence of many chemical and biological pollutants, that may affect fish leading to environmental and health hazards. In this regard, researchers focus on developing efficient strategies for evaluating fish quality in terms of safety and freshness. Fish safety is determined based on assessing various pollutants, such as heavy metals, pesticides, dyes, and drugs, in fish tissue. Additionally, fish freshness evaluation is based on assessing some indicators including xanthine, hypoxanthine, uric acid, and histamine. Many chromatographic methods can assess all of these chemical indicators to evaluate the fish quality. However, these methods are expensive and often require sophisticated steps. Thus, electrochemical methods based on noble metal nanoparticles (NMNPs), metal-organic frameworks (MOFs) NPs, and their composites as electrode modifiers were investigated as potential replacements for the chromatographic ones. These materials showed high catalytic activity and electrical conductivity compared to the other electrode modifiers. In this review, we spotlight the role of NMNPs and MOF NPs in evaluating the quality of fish samples as a food source. Overall, NMNPs and MOF NPs are considered promising electrode materials for the electrochemical monitoring of fish quality.

Research progress on the synthesis, performance regulation, and applications of Prussian blue nanozymes

Nanocatalytic medicine offers a novel solution to address the issues of low efficacy, potential side effects, and the development of drug resistance associated with traditional therapies. Therefore, developing highly efficient and durable nanozymes is of great significance for treating diseases related to oxidative stress. In recent years, prussian blue nanoparticles (PBNPs) have been demonstrated to possess multiple enzyme-like catalytic activities and are thus referred to as prussian blue nanozymes (PBNZs). Their excellent biocompatibility and biodegradability make PBNZs promising candidates as biomedical materials. Due to their remarkable catalytic activities, PBNZs have shown great potential in various biomedical applications, such as heavy metal detoxification, antioxidative damage, and anticancer therapies. This paper systematically summarizes the Synthetic strategies of PBNZs, analyzes the regulatory factors of their catalytic performance, and highlights the corresponding modulation methods. Furthermore, the biomedical applications of PBNZs are also reviewed. This study aims to provide researchers with insights and inspirations for the design and preparation of high-performance PBNZs.

Emerging insights into the application of metal-organic framework (MOF)-based materials for electrochemical heavy metal ion detection

Heavy metal ions are one of the main sources of water pollution, which has become a major global problem. Given the growing need for heavy metal ion detection, electrochemical sensor stands out for its high sensitivity and efficiency. Metal-organic frameworks (MOFs) have garnered much interest as electrode modifiers for electrochemical detection of heavy metal ions owing to their significant specific surface area, tailored pore size, and catalytic activity. This review summarizes the progress of MOF-based materials, including pristine MOFs and MOF composites, in the electrochemical detection of various heavy metal ions. The synthetic methods of pristine MOFs, the detection mechanisms of heavy metal ions and the modification strategies of MOFs are introduced. Besides, the diverse applications of MOF-based materials in detecting both single and multiple heavy metal ions are presented. Furthermore, we present the current challenges and prospects for MOF-based materials in electrochemical heavy metal ion detection.

An electrochemical sensor based on CS-MWCNT and AuNPs for the detection of mycophenolic acid in plasma

For patients receiving organ transplants, monitoring the blood concentration of MPA can provide timely information on whether MPA has reached the effective therapeutic window to better function while reducing the incidence of rejection or adverse reactions. In this study, an electrochemical sensor for the detection of MPA was built using a nanocomposite made of CS-MWCNT and AuNPs. At the same time, the high performance liquid phase (HPLC) method for MPA was established and compared with this sensor. The surface morphology, structure, and roughness of the material on the electrode were characterized by scanning electron microscopy (SEM), Fourier transforms infrared spectroscopy (FTIR), and atomic force microscopy (AFM). In addition, the electrochemical behavior of the modified electrode was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The standard curve was obtained in blank plasma, not pure buffer solution. The peak current was linearly related to the MPA concentration in the linear range of 0.001-0.1 mM with a detection limit of 0.05 μM and good anti-interference ability. Moreover, the sensor was employed with success for the determination of MPA in rat plasma with good recovery. The electrochemical sensor presented here is eco-friendly, and sensitive, and offers a great possibility for practical applicability.

Determination of Hg(II) and Methylmercury by Electrothermal Atomic Absorption Spectrometry after Dispersive Solid-Phase Microextraction with a Graphene Oxide Magnetic Material

The toxicity of all species of mercury makes it necessary to implement analytical procedures capable of quantifying the different forms this element presents in the environment, even at very low concentrations. In addition, due to the assorted environmental and health consequences caused by each mercury species, it is desirable that the procedures are able to distinguish these forms. In nature, mercury is mainly found as Hg⁰, Hg²⁺ and methylmercury (MeHg), with the latter being rapidly assimilated by living organisms in the aquatic environment and biomagnified through the food chain. In this work, a dispersive solid-phase microextraction of Hg²⁺ and MeHg is proposed using as the adsorbent a magnetic hybrid material formed by graphene oxide and ferrite (Fe₃O₄@GO), along with a subsequent determination by electrothermal atomic absorption spectrometry (ETAAS). On the one hand, when dithizone at a pH = 5 is used as an auxiliary agent, both Hg(II) and MeHg are retained on the adsorbent. Next, for the determination of both species, the solid collected by the means of a magnet is suspended in a mixture of 50 µL of HNO₃ (8% v/v) and 50 µL of H₂O₂ at 30% v/v by heating for 10 min in an ultrasound thermostatic bath at 80 °C. On the other hand, when the sample is set at a pH = 9, Hg(II) and MeHg are also retained, but if the solid collected is washed with N-acetyl-L-cysteine only, then the Hg(II) remains on the adsorbent, and can be determined as indicated above. The proposed procedure exhibits an enrichment factor of 49 and the determination presents a linear range between 0.1 and 10 µg L^-1 of mercury. The procedure has been applied to the determination of mercury in water samples from different sources.

Fabrication of a label-free electrochemical cell-based biosensor for toxicity assessment of thiram

Thiram has been widely used in agriculture and may invades the food chain, posing a threat to human health. In this research, a label-free electrochemical cell-based biosensor was presented for in vitro toxicity assessment of thiram. HepG2 cells were cultured on poly-l-lysine@gold nano-flowers functionalized indium tin oxide coated glass electrode (PLL@AuNFs/ITO) to serve as biorecognition elements. AuNFs were electrodeposited on ITO to provide an enlarged specific surface area and benefited the output signal amplification. PLL was selected as an effective biocompatible coating material to facilitate cell adhesion and proliferation, thereby realizing one-step recording of electrochemical signals from thiram-treated cells. With the aid of the differential pulse voltammetry method, the fabricated biosensor was applied to assess the cytotoxicity of thiram. Results showed that the cytotoxicity measured by the fabricated biosensor exhibited a linear relationship related to thiram concentration ranging from 5 to 50 μM with a detection limit of 2.23 μM. The IC₅₀ of thiram obtained by the biosensor was 29.5 μM, which was close to that of conventional MTT assay (30.8 μM). The effects of thiram on HepG2 cells were also investigated via SEM and flow cytometry. Meanwhile, the proposed biosensor was used to evaluate the toxicity of thiram in fruit samples. Results indicated that the toxicity of thiram cannot be ignored even at a low residual concentration in food (≤5 mg/kg). In conclusion, the developed sensor showed excellent sensitivity, stability, and reliability, which provided a great capacity for the convenient toxicity evaluation of thiram residue in food.

Recent advances in the application of Raman spectroscopy for fish quality and safety analysis

Fish is one of the highly demanded aquatic products, and its quality and safety play a pivotal role in daily diet. However, the possible hazardous substance in perishable fish both in pre- and postharvest periods may decrease their values and pose a threat to public health. Laborious and expensive traditional methods drive the need of developing effective tools for detecting fish quality and safety properties in a rapid, nondestructive, and effective manner. Recent advances in Raman spectroscopy (RS) and surface-enhanced Raman scattering (SERS) have shown enormous potential in various aspects, which largely boost their applications in fish quality and safety evaluation. They have incomparable merits such as providing molecule fingerprint information and allowing for rapid, sensitive, and noninvasive detection with simple sample preparation. This review provides a comprehensive overview focusing on the applications of RS and SERS for fish quality assessment and safety inspection, highlighting the hazardous substance and illegal behavior both in preharvest (veterinary drug residues and environmental pollutants) and postharvest (freshness and illegal behavior) particularly. Moreover, challenges and prospects are also proposed to facilitate the vigorous development of RS and SERS. This review is aimed to emphasize potential opportunities for applying RS and SERS as promising techniques for routine food quality and safety detection. PRACTICAL APPLICATION: With these applications, it can be clearly indicated that RS and SERS are promising and powerful in fish quality and safety surveillance, thereby reducing the occurrence of commercial fraud and food safety issues. More efforts still should be concentrated on exploiting the high-performance Raman instruments, establishing a universal Raman database, developing reproducible SERS substrates and combing RS with other versatile spectral techniques to promote these technologies from laboratory to practice. It is hoped that this review should arouse more research interests in RS and SERS technologies for fish quality and safety surveillance, as well as provide more insights to make a breakthrough.

An ultrasensitive electrochemical sensor based on in situ synthesized manganese dioxide/gold nanoparticles nanocomposites for rapid detection of methylmercury in foodstuffs

The inclusion of methylmercury (CH₃Hg⁺) in the environment and food chain has aroused wide concern due to its high neurotoxicity and cumulative effects. Herein, a highly sensitive electrochemical sensor based on manganese dioxide (MnO₂)/gold nanoparticles (AuNPs) composites is fabricated for CH₃Hg⁺ detection in food. The MnO₂/AuNPs nanocomposites were synthesized in situ on the surface of a glassy carbon electrode by an electrodeposition method and were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The resulting MnO₂/AuNPs modified electrode exhibited a large active surface area, enhanced conductivity and excellent electrocatalytic activity toward CH₃Hg⁺ due to the synergistic effect of MnO₂ and AuNPs. Square wave anodic stripping voltammetry (SWASV) was used as the sensing technique for CH₃Hg⁺, and the stripping peak current showed a good linear relationship with CH₃Hg⁺ concentration in the range of 0.7-15 μg L^-1 with a detection limit of 0.051 μg L^-1. Besides, the interference from Hg²⁺ associated with CH₃Hg⁺ detection can be avoided by the addition of diethylene triamine pentaacetic acid (DTPA). The as-prepared sensor was applied to detect CH₃Hg⁺ in various food samples with satisfactory recoveries, thus providing a promising platform for rapid screening of methylmercury residues.

The metal-organic framework supported gold nanoparticles as a highly sensitive platform for electrochemical detection of methyl mercury species in the aqueous environment

Mercury readily methylates to form extremely toxic methylmercury (CH₃Hg⁺) that seriously imparts central nervous systems' functionality in humans and animals. Therefore, the development of rapid CH₃Hg⁺ determination methods for the detection of environmentally relevant concentrations is a research priority. We developed an electrochemical technique to detect CH₃Hg⁺ with minimal sample preparations, cost-effectively. Gold nanoparticles (AuNPs) were synthesized on metal-organic frameworks (MOFs) in a facile way using potassium borohydride as a reductant. An electrochemical sensor was developed using Au nanoparticles and zeolitic imidazolate framework-67 (Au/ZIF67) modified glassy carbon electrode (Au/ZIF67 GCE) for the determination of CH₃Hg⁺. The linear stripping current responses were ranging from 1 µg/L to 25 µg/L [CH₃Hg⁺], with 0.571 µA/µgL^-1 sensitivity and 0.05 µg/L detection limit. The outstanding performance of Au/ZIF67 modified GCE for CH₃Hg⁺ detection might be attributed to the unique hollow structure and active Co sites of the ZIF67 skeleton and catalytic activity of AuNPs. The new electrochemical sensor shows good stability and no interference by metal ions in the matrix. The Au/ZIF67 modified GCE sensor shows a good promise in detecting CH₃Hg⁺ in natural water.

Using Carbon Paste Electrode Modified with Ion Imprinted Polymer and MWCNT for Electrochemical Quantification of Methylmercury in Natural Water Samples

Methylmercury (MeHg) is one of the most toxic organic mercury compounds found in the environment. The continuous exposure of human beings to this highly toxic compound may damage their nervous system. The present work reports the development and application of a novel electrochemical sensing technique for the quantification of MeHg using a modified carbon paste electrode with multi-walled carbon nanotubes (MWCNTs) combined with ion imprinted polymer, which is highly selective toward MeHg (CPE/MWCNTs/IIP-MeHg) detection. The ion imprinted polymer was synthesized using 2-mercaptobenzothiazole (MBT), acrylic acid (AA) and MeHg employed as ligand, functional monomer and template ion, respectively, and the synthesized material was characterized by Raman spectroscopy and SEM-EDX. Both the proposed and control sensors were characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The electrochemical measurements were carried out using differential pulse stripping voltammetry (DPSV), and a well-defined anodic peak observed at about +0.138 V (vs. Ag/AgCl) was recorded for MeHg. The application of the CPE/MWCNTs/IIP-MeHg sensor (which increased the charge transfer on the electrode surface) under the DPSV-based electrochemical method (which enhanced the signal intensity) made the detection technique highly sensitive and selective for the quantification of methylmercury. Under optimum experimental conditions, the proposed sensor exhibited a linear response range of 560–610 µg L⁻¹ and a detection limit of 0.538 µg L⁻¹, with acceptable relative error values ≤1% when applied for the detection of MeHg in real water samples.

Wearable and Mobile Sensors for Personalized Nutrition

While wearable and mobile chemical sensors have experienced tremendous growth over the past decade, their potential for tracking and guiding nutrition has emerged only over the past three years. Currently, guidelines from doctors and dietitians represent the most common approach for maintaining optimal nutrition status. However, such recommendations rely on population averages and do not take into account individual variability in responding to nutrients. Precision nutrition has recently emerged to address the large heterogeneity in individuals' responses to diet, by tailoring nutrition based on the specific requirements of each person. It aims at preventing and managing diseases by formulating personalized dietary interventions to individuals on the basis of their metabolic profile, background, and environmental exposure. Recent advances in digital nutrition technology, including calories-counting mobile apps and wearable motion tracking devices, lack the ability of monitoring nutrition at the molecular level. The realization of effective precision nutrition requires synergy from different sensor modalities in order to make timely reliable predictions and efficient feedback. This work reviews key opportunities and challenges toward the successful realization of effective wearable and mobile nutrition monitoring platforms. Non-invasive wearable and mobile electrochemical sensors, capable of monitoring temporal chemical variations upon the intake of food and supplements, are excellent candidates to bridge the gap between digital and biochemical analyses for a successful personalized nutrition approach. By providing timely (previously unavailable) dietary information, such wearable and mobile sensors offer the guidance necessary for supporting dietary behavior change toward a managed nutritional balance. Coupling of the rapidly emerging wearable chemical sensing devices-generating enormous dynamic analytical data-with efficient data-fusion and data-mining methods that identify patterns and make predictions is expected to revolutionize dietary decision-making toward effective precision nutrition.

Cell-based electrochemical cytosensor for rapid and sensitive evaluation of the anticancer effects of saponin on human malignant melanoma cells

Discovering new anticancer agents and analyzing their activities is a vital part of drug development, but it requires a huge amount of time and resources, leading to the increasing demands for more-effective techniques. Herein, a novel and simple cell-based electrochemical biosensor, referred to as a cytosensor, was proposed to investigate the electrochemical behavior of human skin malignant melanoma (SK-MEL28) cells and the anticancer effect of saponin on cell viability. To enhance both electrocatalytic properties and biocompatibility, gold nanoparticles were electrochemically deposited onto a conductive substrate, and poly-L-lysine was further added to the electrode surface. Electric signals from SK-MEL28 cells on the electrodes were obtained from cyclic voltammetry and differential pulse voltammetry. The cathodic peak current was proportional to the cell viability and showed a detection range of 2,880-40,000 cells per device with an excellent linear cell number-intensity relationship (R²= 0.9952). Furthermore, the anticancer effect of saponin on SK-MEL28 cells was clearly established at concentrations higher than 20 μM, which was highly consistent with conventional assays. Moreover, the developed electrochemical cytosensor for evaluating anticancer effects enabled rapid (<2 min), sensitive (LOQ: 2,880cells/device), and non-invasive measurements, thus providing a new avenue for assessing the anticancer drugs in vitro.

A novel electrochemical paper sensor for low-cost detection of 5-methyltetrahydrofolate in egg yolk

An electrochemical deposition method was used to fabricate a gold nanoflower (AuNF) and carbon nanoparticle (CNP) modified carbon paper (CP) sensor (AuNFs-CNPs/CP) for the low-cost detection of 5-methyltetrahydrofolate (5-mTHF) in egg yolk. AuNF morphology and structures were characterized by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS), revealing nanoflower sizes in the 50 to 200 nm range. AuNFs formed on the sensor were in the Au⁰. We evaluated 5-mTHF assay performance using cyclic voltammetry, differential pulse voltammetry and chronoamperometry. The AuNFs-CNPs/CP sensor detected 5-mTHF concentrations in the ranges from 1 to 5 mg L^-1 and 1-20 μg L^-1, with an excellent limit of detection of 1 μg L^-1 and good selectivity toward 5-mTHF, when compared to other potentially interfering molecules in samples. The AuNFs-CNPs/CP sensor was also used to detect 5-mTHF in folate-rich, and was found to be twice than that of ordinary egg yolk.

3-Aminobenzeneboronic Acid Functionalized MoS2 Quantum Dot as Fluorescent Nanoprobe for the Determination of o-Dihydroxybenzene

In this work, by functionalizing MoS₂ quantum dot with 3-aminobenzeneboronic acid, a novel multifunctional quantum dot (denoted as B-MoS₂ QD) was obtained and used successfully for a fluorescence nanoprobe for detecting o-dihydroxybenzene (o-DHB). Transmission electron microscopy, fluorescence spectrum, UV-vis spectrum and fluorescence lifetime were used to investigate the prepared nanoprobe. The results show that the B-MoS₂ QD nanoprobe can exhibit strong fluorescence and excellent light fastness owing to the coupled effect from the MoS₂ QDs and boronic acid; interestingly, the vicinal diols structure from its surface can bridge covalently with o-DHB, resulting in the fluorescence quenching of B-MoS₂ QDs and selective recognition toward o-DHB. With the increasing of o-DHB concentration, the nanoprobe fluorescence would gradually decrease. By measuring the fluorescence intensity of B-MoS₂ QDs, a wide linear range from 0.1 to 200.0 μM with a low detection limit of 0.025 μM was obtained for o-DHB analysis; meanwhile, this fluorescence nanoprobe possesses excellent selectivity for the selective detection of o-DHB from its analogues.

Synergistic effects of layer-by-layer films for highly selective and sensitive electrochemical detection of trans-resveratrol

Trans-resveratrol (TRA) possesses a variety of pharmacological activities, making important to explore simple, inexpensive, and reliable analytical methods for identification and quantification of it. We report on the synergistic effects originated from layer-by-layer films of graphene (Gr)-gold nanoparticles (Au) and molecularly imprinted polymers (MIPs) modified glassy carbon electrode (GCE) for electrochemical detection of TRA. To construct the TRA electrochemical sensor (GCE|Gr-Au/MIPs), the films of Gr-Au, MIPs were step by step formed onto GCE via in-situ and controllable electrodeposition and polymerization processes. The compositions, morphologies, and electrochemical properties of obtained films were investigated by various methods. Under the optimized experimental conditions, the electrochemical sensor showed superior performance toward selective and sensitive determination of TRA with K₃[Fe(CN)₆] as electrochemical signal probe. The electrochemical sensor was applied to determine TRA in real samples with good accuracy and recovery, verifying the broad and practical application prospects for foods and medicines analysis.

Tin disulfide nanorod-graphene-β-cyclodextrin nanocomposites for sensing dopamine in rat brains and human blood serum

In the present work describes a facile synthesis of tin disulfide (SnS₂) nanorods decorated graphene-β-cyclodextrin (SnS₂/GR-β-CD) nanocomposite for robust and novel dopamine (DA) electrochemical biosensor applications. The DA biosensor was fabricated using the glassy carbon electrode (GCE) modified with SnS₂/GR-β-CD nanocomposite. The sonochemical and hydrothermal methods have been used for the synthesis of SnS₂/GR-β-CD. Different physicochemical methods were used to confirm the formation of the GR-β-CD, SnS₂, and SnS₂/GR-β-CD nanocomposite. The cyclicvoltammetric cathodic current response of DA was 5 folds higher than those observed at bare, β-CD, SnS₂-β-CD, and GR-β-CD modified GCEs. Under optimised conditions, the biosensor's DPV response current is linear to DA from the concentration of 0.01-150.76 μM. The detection limit of the biosensor was 4 nM. The SnS₂/GR-β-CD biosensor shows an excellent selectivity towards DA in the presence of common interfering species, including ascorbic acid and uric acid. Also, the as-prepared nanocomposite-modified electrode exhibited satisfactory long-term stability, sensitivity (2.49 μAμM^-1 cm^-2) along with reusability for detection of DA. The fabricated SnS₂/GR-β-CD biosensor was successfully used for the detection of DA in the rat brain and human blood serum samples.

Nonlinear optical performances of graphene oxide ternary nanohybrids functionalized by axially coordinated gallium porphyrins

A GaTPP-GO-GaTTP ternary nanohybrid possesses enhanced optical nonlinearities compared to other samples due to the efficient charge transfer effect.

Synthesis of imprinted chitosan/AuNPs/graphene-coated MWCNTs/Nafion film for detection of lead ions

An ultrasensitive electrochemical platform based on ion-imprinted nanocomposites for monitoring Pb²⁺ was proposed for environmental protection and food safety applications.

An electrochemical paper based nano-genosensor modified with reduced graphene oxide-gold nanostructure for determination of glycated hemoglobin in blood

Hemoglobin A1c (HbA1c) is a standard biomarker to measure long-term average glucose concentration for diagnosis and monitoring of diabetes. Various methods have been reported for measuring HbA1c, however, portable and precise determination is still challenging. Herein, a new highly sensitive electrochemical nanobiosensor is developed for the specific determination of HbA1c. A nanocomposite of reduced graphene oxide (rGO) and gold with hierarchical architecture structure was electrochemically deposited on a cheap and flexible graphite sheet (GS) electrode. The nanocomposite increased the surface area, improved the electron transfer on the electrode surface and augmented the signal. It also provided a suitable substrate for linkage of thiolated DNA aptamer as a bioreceptor on the electrode surface by strong covalent bonding. The quantitative label free detection was carried out by differential pulse voltammetry (DPV) in a phosphate-buffered saline (PBS) solution containing redox probe Fe(CN)₆^3-/4-. The detection is based on insulating the surface in presence of HbA1c and decreasing the current, which is directly related to the HbA1c concentration. The nanobiosensor demonstrated high sensitivity of 269.2 μA. cm^-2, wide linear range of 1 nM-13.83 μM with a low detection limit of 1 nM. The biosensor was successfully used for measuring HbA1c in blood real sample. Furthermore, it is promising to use it as a part of a point of care device for low-invasive screening and management of diabetes.

Electrochemical aptamer-based microsensor for real-time monitoring of adenosine in vivo

In this work, an implantable and minimally invasive micro-aptasensor for adenosine monitoring in vivo, based on flexible integrated electrodes, was developed. Firstly the sensor was made by the modification of a needle-type electrode with reduced graphene oxide and gold nanoclusters (rGO-AuNCs) using two-step electrodeposition. Secondly Sulfhydryl-terminated capture probe (ssDNA1) was immobilized on rGO-AuNCs modified electrode surface by self-assembly, and then it was hybridized with adenosine aptamer (ssDNA2). Lastly methylene blue (MB) as an electrochemical indicator was adsorbed on the aptamer through specific interaction of MB with guanine base. The peak current of MB decreased linearly with increasing adenosine concentration due to the formation of aptamer-adenosine complex and displacement of the aptamer from the modified electrode surface. The sensor showed a low detection limit of 0.1 nM with signal-to-noise ratio equal to 3 as well as a wide linear response range (0.1 nM-1 mM) in vitro. Also, a high selectivity was demonstrated for adenosine in relation to uridine, guanosine, and cytidine. Experiments in vivo demonstrated fast responses for a range of adenosine concentrations. This work demonstrates a promising path for implantable devices for the determination of biomolecules in vivo, thus allowing for health tests, detection of infectious diseases, and other medical conditions.

Biosensor Applications of Electrodeposited Nanostructures

The development of biosensors for a range of analytes from small molecules to proteins to oligonucleotides is an intensely active field. Detection methods based on electrochemistry or on localized surface plasmon responses have advanced through using nanostructured electrodes prepared by electrodeposition, which is capable of preparing a wide range of different structures. Supported nanoparticles can be prepared by electrodeposition through applying fixed potentials, cycling potentials, and fixed current methods. Nanoparticle sizes, shapes, and surface densities can be controlled, and regular structures can be prepared by electrodeposition through templates. The incorporation of multiple nanomaterials into composite films can take advantage of the superior and potentially synergistic properties of each component. Nanostructured electrodes can provide supports for enzymes, antibodies, or oligonucleotides for creating sensors against many targets in areas such as genomic analysis, the detection of protein antigens, or the detection of small molecule metabolites. Detection can also be performed using electrochemical methods, and the nanostructured electrodes can greatly enhance electrochemical responses by carefully designed schemes. Biosensors based on electrodeposited nanostructures can contribute to the advancement of many goals in bioanalytical and clinical chemistry.

Graphene-derived nanomaterials as recognition elements for electrochemical determination of heavy metal ions: a review

This review (with 155 refs.) summarizes the progress made in the past few years in the field of electrochemical sensors based on graphene-derived materials for the determination of heavy metal ions. Following an introduction of this field and a discussion of the various kinds of modified graphenes including graphene oxide and reduced graphene oxide, the review covers graphene based electrodes modified (or doped) with (a) heteroatoms, (b) metal nanoparticles, (c) metal oxides, (d) small organic molecules, (e) polymers, and (f) ternary nanocomposites. Tables are provided that afford an overview of representative methods and materials for fabricating electrochemical sensors. Furthermore, sensing mechanisms are discussed. A concluding section presents new perspectives, opportunities and current challenges. Graphical Abstract Schematic illustration of electrochemical sensor for heavy metal ion sensing based on heteroatom-doped graphene, metal-modified graphene, metal-oxide-modified graphene, organically modified graphene, polymer-modified graphene, and ternary graphene based nanocomposites.

Biological macromolecule delivery system fabricated using zein and gum arabic to control the release rate of encapsulated tocopherol during in vitro digestion

Nanoparticles were fabricated by adsorbing gum arabic (GA) on zein nanoparticles by antisolvent precipitation. The most stable mass ratio of zein:GA was 1:1.5 with a stable zeta-potential (-32.8 mV) in a pH range of 3.0-9.0. The surface hydrophobicity of zein-GA nanoparticles indicated formation of a stable structure through electrostatic attraction at a pH range of 3.0-6.0 and hydrophobic interaction at pH 7.0-9.0. The FTIR spectrogram showed an additional role of hydrogen bonds to promote the adsorption of GA on zein nanoparticles. Tocopherol (TOC) was encapsulated within the prepared zein-GA nanoparticles with a high loading capacity. The presence of GA not only prevented the precipitation of zein nanoparticles but also controlled the release of TOC from zein-GA nanoparticles during in vitro gastrointestinal digestion. Zein-GA biopolymer nanoparticles can be stably fabricated in a wide pH range for applications in the food and pharmacy industries.