Influence of different hydrocolloids on dough thermo-mechanical properties and in vitro starch digestibility of gluten-free steamed bread based on potato flour

Impact of pectin or xanthan addition to mashed potatoes gelled with κ-carrageenan on texture and rheology, oral processing behavior, bolus properties and in mouth starch digestibility

Oral processing behavior affects starch bioavailability, but the impact of the oral phase on starch digestibility in potato dishes enriched with polysaccharides has not been clearly established. Therefore, pectin (1 %) or xanthan (1 %) were added to mushed potatoes (MP), which was gelled with κ-carrageenan (0.6 %), to produce the samples named MP-CarP MP-CarX, and MP-Car, respectively. Rheological, textural, sensory and electromyographic tests were conducted on the samples, along with bolus analysis. Both pectin and xanthan softened MP by 23 and 30 %, respectively, and reduced gel strength. The MP-CarP and MP-CarX were orally processed for shorter chewing times; however, their boluses exhibited a 20 % increase in cohesiveness. Chewing the MP-CarP highly enhanced salivation, resulting in a 45 % increase in bolus fragmentation, while the MP-CarX had the highest cohesiveness and lowest fragmentation. The variations in oral processing of MP with pectin or xanthan resulted in differing levels of starch hydrolysis and glucose release in the mouth. Chewing the MP-CarX resulted in lower levels of these processes, highlighting the importance of considering the oral phase of digestion when studying the hypoglycemic effects of polysaccharides. This is essential for developing new and effective approaches to improving glycemic control by incorporating fibers into commonly consumed starchy foods.

Pullulanase-assisted bamboo leaf flavonoids optimize the instant properties, in vitro digestibility, and underlying mechanism in yam flour

In this study, pullulanase-assisted bamboo leaf flavonoids (BLF) were employed to ameliorate limitations of fluidity and digestibility of cooked yam flour via physicochemical properties, digestion, structure and interaction analysis. The results showed that 1) Pullulanase-assisted BLF significantly increased the water solubility (9.02% → 69.38%) and inhibited the swelling (5.54 g/g → 2.29 g/g) during heating and cooling of yam flour, causing it to have liquid-like rheological properties (the tanδ tended to 1). 2) Pullulanase and BLF synergistically affected the anti-digestion of yam flour, reducing the estimated glycemic index to a lower level (58.27 → 48.26, dose-dependent of BLF). 3) Pullulanase-assisted BLF mainly interacted hydrophobic with various components, especially starch, increasing the short/long-range ordered structure of starch, changing the secondary structure of proteins, and forming a tight three-dimensional network structure. This study provided a theoretical foundation for the development of functional foods using yam flour and its potential application in liquid foods.

Feasibility of new polymeric matrices in the production of ferrous sulphate dosimeters

External beam radiotherapy is a treatment modality that employs high doses for curative or palliative purposes. Safety in such treatments, particularly with high-precision equipment, necessitates strict adherence to quality control protocols to ensure the efficacy of oncological treatments. In this context, chemical dosimeters, particularly the Fricke gel, have emerged as valuable tools for quantitatively analysing absorbed radiation doses. These dosimeters can be applied both as tissue-equivalent phantoms and as radiation detectors in radiotherapy centers. The objective of this study was to evaluate the feasibility of new gelling matrices, comprising common materials such as CMC, GGU, and PVA, for producing ferrous sulphate dosimeters aimed at the relative quantification of radiation dose. A rheological study was conducted for different Fricke gel dosimetric formulations. Initially, the performance of these dosimeters, produced at various gel concentrations, was evaluated in terms of their consistency at room temperature. This was achieved through the straightforward process of humidification the gels with glycerine. These matrices consist of both natural and synthetic polymers that are readily accessible, easy to handle, and can be easily incorporated into the acidic ferrous sulphate solution. Parameters such as the influence of gelling matrix concentration, linearity, and stability were assessed and correlated with those previously investigated for Fricke gel produced with bloom 300 pig skin gelatine (GEL). Ferrous sulphate dosimeters fabricated with sodium carboxymethylcellulose (CMC), guar gum (GGU), and polyvinyl alcohol (PVA) exhibited a coefficient of variation of less than 1% relative to the dose response evaluated in this study. By using readily available and easily manageable materials, it is possible to replicate dosimeters with a favourable dosimetric response for high-dose measurements.

Use of Different O/W or W/O Emulsions as Functional Ingredients to Reduce Fat Content and Improve Lipid Profile in Spanish Cured Processed Meat Product ('Chorizo')

In this work, three out of five types of oil-in-water and water-in-oil emulsions were selected to replace pork backfat to reduce the fat content and the improve monounsaturated and polyunsaturated fatty acid content in dry cured sausage ('chorizo'). Different characteristics of the new product were studied: the texture profile, color, nutritional value, lipid profile, vitamin E and thiobarbituric acid (TBA) and sensory qualities. The use of emulsions to replace the animal fat affected all color parameters, obtaining darker, less red and yellow products, which could impact the consumer's purchase intention. This replacement also altered the texture parameters, increasing or decreasing the hardness in comparison with the control sample. The cohesiveness, however, decreased in all cases, which meant that when the samples are cut for consumption, they disintegrated more than the traditional ones. The most relevant aspect for nutritional value is that the use of the new emulsions helped to reduce the total fat and energy value of the reformulated samples. The most significant aspect is that this reformulation helped to reduce the fat content-specifically, saturated fat-while increasing the content of Omega 3/6. The new formulas contained significant quantities of TBA and vitamin E when comparing them with the traditional product.

Advancements in enhancing resistant starch type 3 (RS3) content in starchy food and its impact on gut microbiota: A review

Resistant starch type 3 (RS3), often found in cooked starchy food, has various health benefits due to its indigestible properties and physiological functions such as promoting the abundance of gut beneficial microbial flora and inhibiting the growth of intestinal pathogenic bacteria. However, it is challenging to develop starchy food with high RS3 content. This review aims to provide a detailed overview of current advancements to enhance RS3 content in starchy food and its effects of RS3 on gut microbiota. These approaches include breeding high-amylose cereals through gene editing techniques, processing, enzyme treatments, storage, formation of RS3 nanoparticles, and the incorporation of bioactive compounds. The mechanisms, specific conditions, advantages, and disadvantages associated with each approach and the potential effects of RS3 prepared by different methods on gut microbiota are summarized. In conclusion, this review contains important information that aims to provide guidelines for developing an efficient RS3 preparation process and promote the consumption of RS3-enriched starchy foods to improve overall health outcomes.

A review of gluten detoxification in wheat for food applications: approaches, mechanisms, and implications

With the improved knowledge of gluten-related disorders, especially celiac disease (CD), the market of gluten-free food is growing. However, the current gluten-free diet still presents challenges in terms of nutrition, acceptability, and cost due to the absence of gluten. It is important to note that gluten-related allergies or sensitivities have different underlying causes. And individuals with mild non-celiac gluten disorder symptoms may not necessarily require the same gluten-free treatments. Scientists are actively seeking alternative solutions for these consumers. This review delves into the various strategies employed by researchers for detoxifying gluten or modifying its main protein, gliadin, including genetic treatment, transamidation and deamidation, hydrolysis, and microbial treatments. The mechanisms, constraints of these techniques, their current utilization in food items, as well as their implications for gluten-related disorders, are discussed in detail. Although there is still a gap in the application of these methods as alternative solutions in the real market, the summary provided by our review could be beneficial for peers in enriching their basic ideas and developing more applicable solutions for wheat gluten detoxification.

Psyllium Fibre Inclusion in Gluten-Free Buckwheat Dough Improves Dough Structure and Lowers Glycaemic Index of the Resulting Bread

The demand for gluten-free (GF) bread is steadily increasing. However, the production of GF bread with improved baking quality and enhanced nutritional properties remains a challenge. In this study, we investigated the effects of adding psyllium fibre (PSY) in varying proportions to buckwheat flour on the dough characteristics, bread quality, and starch digestion properties of GF bread. Our results demonstrate that incorporating PSY contributes to the formation of a gluten-like network structure in the dough, leading to an increase in the gas holding capacity from 83.67% to 98.50%. The addition of PSY significantly increased the specific volume of the bread from 1.17 mL/g to 3.16 mL/g. Bread containing PSY displayed superior textural characteristics and colour. Our study also revealed that the inclusion of PSY reduced the digestibility of starch in GF bread. These findings highlight the positive impact of incorporating PSY into GF bread, suggesting its potential in guiding the production of GF bread with a lower glycaemic index. This may be particularly beneficial for individuals seeking to regulate their blood sugar levels or adopt a low-glycaemic diet.

The influence of carboxymethyl cellulose and hydroxypropyl methylcellulose on physicochemical, texture, and sensory characteristics of gluten-free pancake

In this study, gluten-free pancakes were prepared using rice flour and potato starch at a ratio of 50:50. Due to a lack of gluten networks in these ingredients, the hydrocolloid gums including carboxymethyl cellulose (CMC) at 0.5%, 1%, and 1.5% and hydroxypropyl methylcellulose (HPMC) at 1%, 2%, and 3% were added to improve the quality of the final products. The effects of these hydrocolloid gums on the physicochemical, textural, and sensory properties of the gluten-free pancakes were evaluated. Pancakes prepared with wheat flour were used as a control sample. The results showed that the addition of both gums decreased the hardness and chewiness of the gluten-free pancakes while increasing the springiness and their moisture content. Increasing the concentration of the gums resulted in an L* value (lightness) reduction, which produced a darker crust on the pancakes. Moreover, the gluten-free pancakes containing CMC and HPMC had higher specific volumes than the gluten-free samples made without CMC and HPMC. From a sensory point of view, the samples containing 2%, 3% HPMC and 1% CMC received the highest overall acceptance score. Thus, CMC and HPMC can be used as improvers in gluten-free pancakes.

Influence of magnetic field on gluten aggregation behavior and quality characteristics of dough enriched with potato pulp

This study investigated the effect of varying magnetic field intensities (ranging from 0 to 10 mT) on the quality characteristics of dough with 40 % potato pulp substitution (DPP). The results indicated that the DPP fermented with a 4 mT magnetic field exhibited a significant enhancement in the combination of water and substrate, thereby elevating the viscoelastic properties of DPP through reinforcing the stability of gluten network. Meanwhile, DPP treated with a 4 mT magnetic field exhibited the highest amount of disulfide bonds (11.64 μmol SS/g sample). This is accompanied by a prominent cross-linkage structure, as evidenced by SDS-PAGE and CLSM. Notably, the application of a magnetic field substantially augments the dough's capacity to retain gas during fermentation. In addition, the application of magnetic field significantly increased the wet gluten content (20.85 %, P < 0.05) in DPP, which improved tensile properties and an acceptable color profile. The introduction of a magnetic field induces gluten aggregation, which in turn results in heightened particle size distribution and ζ-potential values. In conclusion, this study emphasize the potential of magnetic field technology as a viable method to enhance the overall quality attributes of dough enriched with potato pulp substitution.

Regulation of baking quality and starch digestibility in whole wheat bread based on β-glucans and protein addition strategy: Significance of protein-starch-water interaction in dough

Whole wheat bread has high nutritional value but is characterized by inferior quality and a high glycemic index. Studies have shown that adding β-glucans and protein can improve bread quality. This study investigated the effects of added oat β-glucan, barley β-glucan, or yeast β-glucan on protein synergy and whole wheat dough and bread quality. The mixing properties, rheological properties, and scanning electron microscopy observations showed that the addition of β-glucan promoted the formation of gluten networks, while the synergy between the wheat proteins and β-glucan resulted in a more robust and stable gluten network and a stronger physical starch envelope. Rapid visco-analysis and thermal property evaluations showed that β-glucan addition inhibited the thermal degradation, gelatinization, and retrogradation of starch. Based on the bread quality results, it was found the β-glucan could cause some damage to the bread baking quality. For example, the hardness of samples with oats, barley, and yeast increased to 881.69 g, 952.97 g, and 631.75 g, respectively, compared to samples without β-glucan (317.49 g), whereas the inclusion of yeast β-glucan proved to be less detrimental. Protein and β-glucan both reduced starch digestion to some degree, and showed better synergistic effects, with the lowest estimated glycemic index of 70.08 observed in bread containing added yeast β-glucan and protein. Therefore, yeast β-glucan and protein mixtures could be selected as viable formulations for enhancing the quality of whole wheat bread.

Effects of Tremella aurantialba on physical properties, in vitro glucose release, digesta rheology, and microstructure of bread

In this study, the functional properties of a mixture consisting of Tremella aurantialba powder (TAP) and wheat flour were investigated. Further, the effects of adding 0%, 1%, 3%, 5%, and 10% TAP on the physical properties of bread, as well as its glucose release, microstructure, and rheology during in vitro simulated digestion were studied. The water-holding, oil-holding, and swelling capacities of wheat flour were significantly enhanced (p < 0.05) with the increase of TAP. The addition of TAP increased the hardness, chewiness, gumminess, and moisture content and darkened the color of the bread. Sensory evaluation showed that adding the 3% of TAP could produce bread that satisfies the requirements of consumers. Furthermore, adding TAP could inhibit the release of glucose from the digesta into the dialysis solution, especially the addition of 10% TAP reduced the release of bread glucose by 23.81%. This phenomenon might be related to the increased viscosity of the digesta and the smooth physical barrier on the surface of starch granules during simulated in vitro digestion of bread. Therefore, as a natural food, T. aurantialba has great potential in improving the functional properties of bread and the application of starch matrix products.

Production of buns, the bakery-based snack food, with reduced refined wheat flour content: Recent developments

Buns are very soft puffed bakery snack items, popular in many countries, especially low- and middle-income nations. Buns are either eaten directly or used in the preparation of culinary items. Buns are mainly prepared using refined wheat flour rich in gluten protein and devoid of husk. Consuming gluten-containing foods is leading to several health complications among consumers worldwide. Hence, several researchers have tried to reduce the gluten content in the dough by incorporating cereals flours, protein-rich sources like soy, cheese whey, etc., hydrocolloids, millets, pomace, and seed flour of vegetables and fruits, etc. These additives not only reduce gluten content in the buns to a certain extent but also enhance the fibre content and nutritional profile of the buns. This mini-review summarizes the recent developments in the production of buns using these additives to improve their nutritional quality.

Valorization of pistachio industrial waste: Simultaneous recovery of pectin and phenolics, and their application in low-phenylalanine cookies for phenylketonuria

This study introduces a sustainable approach to simultaneously produce pectin and phenolic compounds from pistachio industrial waste and applies them in the formulation of low-phenylalanine cookies. The co-optimization process was performed using the microwave-assisted technique and a Box-Behnken design, considering four variables and two responses: pectin yield and total phenolic content (TPC). The co-optimized condition (microwave power of 700 W, irradiation time of 210 s, pH level of 1.02, and LSR of 20 mL/g) resulted in a pectin yield of 15.85 % and a TPC of 10.12 %. The pectin obtained under co-optimized condition was evaluated for its physicochemical, structural, and thermal properties and the phenolic extract for its antiradical activity. Characterization of the pectin sample revealed a high degree of esterification (44.21 %) and a galacturonic acid-rich composition (69.55 %). The average molecular weight of the pectin was determined to be 640.236 kDa. FTIR and 1H NMR spectroscopies confirmed the structure of pectin, with an amorphous nature and high thermal stability observed through XRD and DSC analysis. Additionally, the extract exhibited significant antiradical activity comparable to butylated hydroxyanisole and ascorbic acid. The isolated ingredients were used to formulate low-protein, low-phenylalanine cookies for phenylketonuria patients. The addition of 0.5 % pectin and 1 mL/g extract led to increased moisture content (from 9.05 to 12.89 %) and specific volume (from 7.28 to 9.90 mL/g), decreased hardness (from 19.44 to 10.39 N × 102), and improved antioxidant properties (from 5.15 % to 44.60 % inhibition) of the cookies. Importantly, there was no significant increase observed in the phenylalanine content of the samples with pectin and extract addition. Furthermore, sensory evaluation scores demonstrated significantly higher scores for taste, odor, texture, and overall acceptability in cookies enriched with 0.5 % pectin and 1 mL/g extract, with scores of 4.53, 3.93, 4.40, and 4.60, respectively.

Classification, gelation mechanism and applications of polysaccharide-based hydrocolloids in pasta products: A review

Polysaccharide-based hydrocolloids (PBHs) are a group of water-soluble polysaccharides with high molecular weight hydrophilic long-chain molecules, which are widely employed in food industry as thickeners, emulsifiers, gelling agents, and stabilizers. Pasta products are considered to be an important source of nutrition for humans, and PBHs show great potential in improving their quality and nutritional value. The hydration of PBHs to form viscous solutions or sols under specific processing conditions is a prerequisite for improving the stability of food systems. In this review, PBHs are classified in a novel way according to food processing conditions, and their gelation mechanisms are summarized. The application of PBHs in pasta products prepared under different processing methods (baking, steaming/cooking, frying, freezing) are reviewed, and the potential mechanism of PBHs in regulating pasta products quality is revealed from the interaction between PBHs and the main components of pasta products (protein, starch, and water). Finally, the safety of PBHs is critically explored, along with future perspectives. This review provides a scientific foundation for the development and specific application of PBHs in pasta products, and provides theoretical support for improving pasta product quality.

Effects of sodium carboxymethyl cellulose on storage stability and qualities of different frozen dough

Hydrocolloids as Additives have been used for improving the quality of frozen dough for a long time. In this work, the effects of sodium carboxymethyl cellulose (CMC) on quality changes of frozen dough in storage were studied. The water loss rate of the dough and water holding capacity were measured. Rheological and texture properties of the frozen dough were measured by a rheometer and a texture analyzer, respectively. Scanning electron microscopy (SEM) was used to characterize surface network structure and protein structure changes of the frozen dough. Our results reveal that the addition of CMC can inhibit the formation of ice crystals and recrystallization, thus effectively stabilizing the molecular structure of starch, and resulting in more uniform moisture distribution in the frozen dough. When 3% addition of CMC, the water holding capacity of the two kinds of dough reached the best, and the water loss rate of corn dough reached the lowest. The cohesion of the two kinds of dough reaches the maximum with 3 wt% addition of CMC, while the hardness and chewiness of wheat and corn multigrain dough reaches the maximum with 3 wt% and 4 wt% addition of CMC, respectively. The results show proper CMC addition (3 wt% and 4 wt%) finally improves the stability and qualities of the frozen dough. The research concerning the effects of CMC on quality of frozen dough provides better understanding for the frozen food industry.

Optimisation of the techno-functional and thermal properties of heat moisture treated Bambara groundnut starch using response surface methodology

This work optimised the techno-functional and thermal properties of heat moisture treated Bambara groundnut starch (BGS). A central composite rotatable design (Design-Expert software v8.0.1.0) comprising two independent factors of temperature and time was used. Extracted BGS were subjected to heat-moisture treatment (HMT) at 80-120 °C for 30-90 min at different moisture levels of 15% (HMT 15-BGS), 25% (HMT 25-BGS) and 35% (HMT 35-BGS). The optimum HMT conditions for BGS were found to be 80 °C for 30 min (HMT 15), 105.74 °C for 30 min (HMT 25), and 113.16 °C for 30 min (HMT 35). The desirability values of the obtained optimum conditions were 0.63 (HMT 15) and 1.00 (HMT 25 and 35). In HMT 35-BGS, water absorption capacity was significantly affected by the quadratic effect of temperature and time. In contrast, solubility was significantly affected by the linear effect of time and the quadratic effect of temperature. Temperature and treatment time had no significant effect (p ≥ 0.05) on the differential scanning calorimetry thermal properties of HMT 15, 25 and 35-BGS. Scanning electron micrographs of optimised BGS showed round and oval-shaped starch granules ranging from 4.2 to 4.7 mm (width) and 10 μm for length. Unmodified and optimised HMT-BGS showed characteristic FTIR bands linked with common starches. All BGS samples displayed multiple vibrations in the region below 1000 cm^-1 due to the skeletal vibrations of the glucose pyranose ring.

Study of ultrasonic treatment on the structural characteristics of gluten protein and the quality of steamed bread with potato pulp

Physicochemical properties and microstructure of gluten protein, and the structural characteristics of steamed bread with 30 % potato pulp (SBPP) were investigated by ultrasonic treatments. Results showed that 400 W ultrasonic treatment significantly (P < 0.05) increased the combination of water and substrate in the dough with 30 % potato pulp (DPP). The contents of wet gluten, free sulfhydryl (SH), and disulfide bond (SS) were influenced by ultrasonic treatment. Moreover, UV-visible and fluorescence spectroscopy demonstrated that the conformation of gluten protein was changed by ultrasonic treatment (400 W). Fourier transform infrared (FT-IR) illustrated that the β-sheet content was significantly (P < 0.05) increased (42 %) after 400 W ultrasonic treatment, and the surface hydrophobicity of gluten protein in SBPP increased from 1225.37 (0 W ultrasonic treatment) to 4588.74 (400 W ultrasonic treatment). Ultrasonic treatment facilitated the generation of a continuous gluten network and stabilized crumb structure, further increased the specific volume and springiness of SBPP to 18.9 % and 6.9 %, respectively. Those findings suggested that ultrasonic treatment would be an efficient method to modify gluten protein and improve the quality of SBPP.

Main factors affecting the starch digestibility in Chinese steamed bread

Chinese steamed bread (CSB) is one of the staple foods in China, although it has a high glycemic index (GI) value. Development of CSB with a slower starch digestibility is thus of great importance for the improvement of human health. Many factors are related to the starch digestibility in CSB. Most currently available strategies are focusing on the incorporation of other whole flours with high dietary fiber or polyphenols to reduce the starch digestibility. Although successful in reducing starch digestibility, the incorporation of these flours also deteriorated textural attributes and sensory characteristics of CSB. Much more strategies have been applied for the reduction of starch digestibility in breads, which should be further explored to confirm if they are applicable for CSB. This review contains important information, that could potentially turn CSB into a much healthier food product with slower starch digestibility.

Optimizing the Rheological and Textural Properties of Chapatti Enriched with House Crickets (Acheta domesticus) Flour Using Hydrocolloids by an I-Optimal Design

The fortification of food with edible insect flour can improve its nutrition profile, but also affect its techno-functional characteristics. In this study, an I-optimal design was applied to improve the rheological and textural properties of wheat flour chapatti containing 10% cricket (Acheta domesticus) flour. More specifically, the impact and optimal addition of hydrocolloids (carboxymethyl cellulose, hydroxypropyl methylcellulose, guar gum and xanthan gum) and water content were studied. For all the responses, the model and model terms were highly significant and showed the different impact of the hydrocolloids on the rheological properties. To evaluate the predictive power of the models, two sets of optimal process settings were chosen: one based on dough properties, and another on baked chapatti. For both sets, the actual responses were in the range of predicted responses for almost all properties. In addition, it was shown that using the settings based on dough properties, the actual responses were not significantly different from the control chapatti, whereas for the settings based on baked chapatti, there were differences in terms of the extensibility of both dough and chapatti. Thus, the I-optimal design is suitable to optimize the dough properties and the baked chapatti when enriching chapatti with cricket flour.

Gluten-free bakery products: Ingredients and processes

There is an increasing demand for gluten-free products around the world because certain groups of people, which have increased in the last decades, need to eliminate gluten from their diet. A growing number of people consider gluten-free products to be healthier. However, making gluten-free products such as bread is a technological challenge due to the important role of the gluten network in their development. However, other products, such as cakes and cookies usually made with wheat flour, can easily be made with gluten-free starches or flours since gluten does not play an essential role in their production. To replace wheat flour in these elaborations it is necessary to resort to gluten-free starches and/or flours and to gluten substitutes. Additionally, it can be convenient to incorporate other ingredients such as proteins, fibers, sugars or oils, as well as to modify their quantities in wheat flour formulations. Regarding gluten-free flours, it will also be necessary to know the parameters that influence their functionality in order to obtain regular products. These problems have originated a lower availability of gluten-free products which have a worse texture and are less tasty and more expensive than their homologues with gluten. These problems have been partially solved thanks to research on these types of products, their ingredients and their production methods. In recent years, studies about the nutritional improvement of these products have increased. This chapter delves into the main ingredients used in the production of gluten-free products, the processes for making gluten-free breads, cakes and cookies, and the nutritional quality of these products.

Effects of different gelatinization degrees of starch in potato flour on the quality of steamed bread

The effect of four kinds of potato flour with different gelatinization degrees on the quality of steam bread was investigated in the present study. Results showed that medium-well flour (MWF) and potato flakes (PF) steamed bread, particularly MWF steamed bread, possessed the desired product properties liked by consumers. The MWF steamed bread had the highest appearance score (42.78) and total sensory evaluation score (81.60), and the PF steamed bread exhibited the highest specific volume (1.84 mL/g) and taste score (43.05). An increase in the degree of potato flour gelatinization led to an increase in dough gas retention coefficient from 80.20 mL/100 mL to 85.17 mL/100 mL and a more uniform and dense dough microstructure. During dough preparation, the increased gelatinization degree of potato flours enhanced the hydroscopicity competition between potato starch and gluten, resulting in a flocculent gluten network and increased potato starch volume during steaming. During steaming, steamed bread with higher gelatinization degree of potato flour formed a homogenous and dense starch gel-gluten double network, making them softer with more uniform gas cells and larger specific volume. Thus, this study provides a perspective of the effect of starch gelatinization on steamed bread quality.

Effects of potato and sweet potato flour addition on properties of wheat flour and dough, and bread quality

The effects of 10%-30% of wheat flour substitution with potato flour (PF) and sweet potato flour (SPF) on the flour and dough properties, the total polyphenol (TPC), and carotenoid contents (TCC) of bread, as well as their correlation with bread texture and starch digestibility, were investigated. With PF and SPF addition, the peak, breakdown, and setback viscosity of the flour decreased. The addition of PF and SPF reduced the dough formation and stabilization duration, as well as the hardness of the bread. The specific volume of the bread depended on the addition amount of PF and SPF. When the addition of PF and SPF was 15%, the bread had the lowest hardness and highest specific volume. The TPC and TCC in the bread depended on the added flour variety, and negatively influenced specific volume and positively influenced the content of resistant starch (RS).

Gluten-Free Bread and Bakery Products Technology

Gluten, a protein fraction from wheat, rye, barley, oats, their hybrids and derivatives, is very important in baking technology. The number of people suffering from gluten intolerance is growing worldwide, and at the same time, the need for foods suitable for a gluten-free diet is increasing. Bread and bakery products are an essential part of the daily diet. Therefore, new naturally gluten-free baking ingredients and new methods of processing traditional ingredients are sought. The study discusses the use of additives to replace gluten and ensure the stability and elasticity of the dough, to improve the nutritional quality and sensory properties of gluten-free bread. The current task is to extend the shelf life of gluten-free bread and bakery products and thus extend the possibility of its distribution in a fresh state. This work is also focused on various technological possibilities of gluten-free bread and the preparation of bakery products.

The dough-strengthening and spore-sterilizing effects of mannosylerythritol lipid-A in frozen dough and its application in bread making

Biosurfactants have been put into applications in breadmaking industry, while the effects of mannosylerythritol lipid-A (MEL-A) on gluten network of frozen dough, bread quality and microbial spoilage were firstly investigated in this study. Rheology and differential scanning calorimetry (DSC) analysis showed that MEL-A significantly improved the rheological properties of frozen dough and reduced the content of frozen water. Further experiments showed that MEL-A promoted the formation of aggregates by interacting with gluten protein, and strengthened the gluten network through molecular weight distribution measurement and microstructure observation, effectively avoiding the destruction of ice crystals. A series of bread assessments illustrated MEL-A improved the loaf volume, gas retention ability and textural property. In addition, MEL-A (1.5%) killed 99.97% of the vegetative cells of Bacillus cereus and 75.54% of the spores, and at the same time had a slight inactivation effect on yeast. These results indicate that MEL-A has broad application prospects in the baking industry and the storage stage of flour products.

Effect of ultrasound-assisted dough fermentation on the quality of dough and steamed bread with 50% sweet potato pulp

Ultrasound at an intensity of 17.5, 20.0, 22.5, 25.0 and 27.5 W/L was used to assist dough fermentation to prepare steamed bread with 50% sweet potato pulp (SB-50% SPP), which was compared with SB-50% SPP without ultrasonic treatment. The dough rheology, starch-gluten network, texture characteristics and sensory quality of steamed bread with different ultrasonic power densities (UPDs) were investigated. Dough samples at UPD of 22.5 W/L showed optimal viscoelasticity. The microstructure images exhibited that the content of starch particles wrapped in the gluten network increased significantly after sonication. In addition, the reduction in free sulfhydryl (SH) content and increase in wet gluten content after ultrasonic treatment led to significantly improved dough extensibility (p < 0.05). Results exhibited that the specific volume of SB-50% SPP increased by 13.93% and the hardness decreased by 21.96% compared with the control under UPD of 22.5 W/L. This study suggested that the application of ultrasound as a green technology to dough fermentation could lead to SB-50% SPP with good quality and sensory characteristics.

The Role of Hydrocolloids in Gluten-Free Bread and Pasta; Rheology, Characteristics, Staling and Glycemic Index

Hydrocolloids are important ingredients controlling the quality characteristics of the final bakery products. Hydrocolloids are frequently used in gluten-free (GF) recipes, mimicking some rheological properties of gluten, improving dough properties, delaying starch retrogradation and improving bread texture, appearance and stability. Hydrocolloids addition increases viscosity and incorporation of air into the GF dough/batter. Besides their advantages for the technological properties of the GF bread, hydrocolloids addition may impact the glycemic index (GI) of the final product, thus answering the demand of people requiring products with low GI. This review deals with the application of hydrocolloids in GF bread and pasta with a focus on their effect on dough rheology, bread hardness, specific volume, staling and GI.

Development of Gluten-Free Muffins with β-Glucan and Pomegranate Powder Using Response Surface Methodology

More consumers are being diagnosed with celiac disease or diseases in which wheat products should be avoided. For this reason, it is important to increase the range of gluten-free products available. In this study, it was decided to optimize the technology for the creation of a muffin with β-glucan (BG) and pomegranate (PG), while establishing water share (WT), using the response surface methodology. It was shown that β-glucan and water had the most significant influence on specific volume and moisture (p ≤ 0.001). However, the increase of hardness, color, and total phenolic content (TPC) was mainly influenced by the increase of pomegranate content (p ≤ 0.01 for harness and color and p ≤ 0.001 for TPC). Consumers accepted products high in β-glucan more than high in pomegranate. Optimization ended with a composition that included 1.89% BG, 9.51% PG, and 77.87% WT. There were no significant differences between the model and the experimental sample, apart from higher consumer acceptability.

Texture and bio-functional characteristics of a Chinese steamed bread prepared from lotus root powder partially replacing wheat flour

Making low GI of the Chinese steamed bread (CSB) with acceptable eating quality is a challenge. A CSB prepared from wheat flour partially substituted by lotus root powder (LRP) showed good prospects. RVA profile and texture profile were determined to evaluate the texture, while animal test were used to confirm the bio-functional attributes. The addition of LRP effectively changed the RVA profile of lotus-wheat incorporated flour (LWIF). CSB prepared from 30% LWIF showed acceptable eating quality with higher springiness, cohesiveness, and recovery while lower hardness. After 12 weeks of 30% LWIF administrating, the fast blood glucose of diabetic rat decreased from 17.6 to 5.8 mmol/L together with the reduction of serum TC, TG and LDL-C. The hepatic histopathological examination and serum levels changes of SOD, CAT and FFA confirmed LWIF could effectively protect the liver of the diabetic rats from damage caused by oxidative stress.

Use of Oleogels to Replace Margarine in Steamed and Baked Buns

Bakery products are usually formulated with solid fats, like margarines and shortenings, which contain high levels of saturated and trans-fatty acids and have negative effects on human health. In this study, hydroxypropyl methylcellulose (HPMC) and xanthan gum (XG) were used as oleogelators to prepare oleogels, using sunflower and olive oil, as substitutes for margarine in baked or steamed buns. The effect of oleogels on the physical properties of the buns was evaluated by analyzing the crumb structure, specific volume, height, and texture. In addition, a triangular discriminatory sensory test was conducted, and lipid digestibility was assessed through in vitro digestion studies. Replacement of margarine with oleogels produced steamed buns with no differences in the crumb structure, volume, height, and texture; however, in baked buns, a less porous and harder structure was produced. No differences in texture were observed between the margarine buns and buns made with oleogels when the triangular test was conducted. The extent of lipolysis was not affected when margarine was replaced by oleogels in the baked and steamed buns. The results suggest that using oleogels instead of margarine in buns could represent an interesting strategy to prepare healthier bakery products.

Evaluation of texture, retrogradation enthalpy, water mobility, and anti-staling effects of enzymes and hydrocolloids in potato steamed bread

The functionalities of hydrocolloids and enzymes in texture, retrogradation enthalpy, water mobility and distribution, and anti-staling effects of potato steamed bread stored for 0, 24, and 48 h at 25 °C were investigated. Four kinds of hydrocolloids, including carrageenan, xanthan gum, arabic gum, sodium alginate, and one kind of enzyme (xylanase) showed little effects on the hardness reduction and springiness retention of potato steamed bread during storage, while the presence of α-amylase and lipase could slow down its staling rate. Potato steamed bread with combination of α-amylase (20 mg/kg) and lipase (40 mg/kg) exhibited the lowest hardness, with a significant reduction of 44.20%, besides improving the specific volume, L*, and overall acceptability in sensory evaluation. The addition of α-amylase and lipase could decrease the retrogradation enthalpy and bound water, and increase the mobility of mobile water. These findings shed efficient methods to retard staling of potato steamed bread.

Effects of Different Amylose Contents of Foxtail Millet Flour Varieties on Textural Properties of Chinese Steamed Bread

In order to improve the nutritional value and quality of steamed bread, and promote the industrial development of the whole-grain food industry, a texture analyzer was used to study the effects of cultivars of whole foxtail millet flour (WFMF) on the texture of Chinese steamed bread (CSB). Orthogonal partial least squares discriminant analysis (OPLS-DA) was also conducted. The addition of different cultivars of WFMF significantly altered the height–diameter ratio, specific volume, hardness, cohesiveness, gumminess, and chewiness of CSB (p < 0.05). Large amounts of foxtail millet flour significantly increased the hardness, gumminess and chewiness of the bread (p < 0.05), and the bread height–diameter ratio, specific volume, cohesiveness and springiness significantly decreased (p < 0.05). We screened sensory evaluation, chewiness, specific volume, and hardness as the signature differences in the quality components according to the variable influence on the projection (VIP) values. OPLS-DA could distinguish the addition levels of different samples.

Characteristics of gluten-free potato dough and bread with different potato starch-protein ratios

The poor retention of fermentation gases and air is a critical issue for gluten-free (GF) products. To better understand the effect of potato flour on the characteristics of GF bread, the mechanistic relations between potato starch and potato protein in different ratios at 9:1, 8:2, 7:3, 6:4 and 5:5 for GF dough were investigated for viscoelasticity, thermal properties, moisture, microstructures, and bread quality. The results reveal that potato starch had a relatively important role in both dough and bread. The viscous character of dough was highest at a proportion of 6:4, with a more compact microstructure and better bread color, volume, hardness, chewiness, resilience and springiness. With decreasing starch content, the gelatinization and retrogradation enthalpy decreased, and the relaxation time of immobilized water and free water increased significantly. These results are believed to be helpful for processors to develop and optimize GF breads with potato starch and potato protein.

Recent Developments of Carboxymethyl Cellulose

Carboxymethyl cellulose (CMC) is one of the most promising cellulose derivatives. Due to its characteristic surface properties, mechanical strength, tunable hydrophilicity, viscous properties, availability and abundance of raw materials, low-cost synthesis process, and likewise many contrasting aspects, it is now widely used in various advanced application fields, for example, food, paper, textile, and pharmaceutical industries, biomedical engineering, wastewater treatment, energy production, and storage energy production, and storage and so on. Many research articles have been reported on CMC, depending on their sources and application fields. Thus, a comprehensive and well-organized review is in great demand that can provide an up-to-date and in-depth review on CMC. Herein, this review aims to provide compact information of the synthesis to the advanced applications of this material in various fields. Finally, this article covers the insights of future CMC research that could guide researchers working in this prominent field.

The relationship between amylopectin fine structure and the physicochemical properties of starch during potato growth

The aim of this study was to explore the relationship between the structural and functional properties of starch isolated from Atlantic potatoes at different stages of growth without the effect of varieties and growth environment. The molecular size and chain-length distribution of amylopectin significantly varied with growth. The M_w and M_n of amylopectin ranged from 2.976 × 10⁷ to 4.512 × 10⁷ g/mol and 1.275 × 10⁷ to 2.295 × 10⁷ g/mol, respectively, suggested that the polydispersity varied with growth. The average chain length of amylopectin during potato growth showed small but significant changes and ranged from DP 23.59 to 24.73. Overall, A_fp chains, A_crystal chains, and B1 chains increased with growth, and B2 and B3 chains decreased with growth. There was wide variation in starch pasting, gelatinization, retrogradation, in vitro starch digestibility, swelling power, solubility, and gel stability properties. Specifically, potato starch harvested at the earliest time had the highest resistant starch content. The variation trend of swelling power and solubility was similar, reached highest value at 42 days, were 20.38 g/g and 8.83%, respectively. Correlation analysis revealed that the physicochemical properties were significantly affected by amylopectin fine structure. The results of this study enhance our understanding of the structure-function relationship of potato starch.