Development of a biomimetic enzyme-linked immunosorbent assay based on molecularly imprinted polymers on paper for the detection of carbaryl

Flexible hand-made carbon electrode decorated with metronidazole imprinted polymer

Carbon paper was used as a cost-effective electrode material for flexible electrode fabrication. These electrodes were coated with polypyrrole film imprinted with metronidazole. SEM imaging indicated successful covering of the carbon paper fibers. Structure of the pre-polymerization complex was optimized via DFT simulations. This imprinted polymer-modified electrode responded linearly to the logarithm of metronidazole concentration in 0.2 to 200 nM range with the LOD of 0.4 nM in the DPV experiments in the presence of the Ru(NH3)6Cl3 redox probe. Selectivity of the fabricated sensor was appreciably high, and the apparent imprinting factor was equal to IF = 38. Such high selectivity and the imprinting factor confirmed successful imprinting in the polypyrrole matrix. The sensor was validated by metronidazole determination in honey samples. Moreover, robustness of the MIP-coated carbon paper electrode was proven. Only a slight loss of recorded current values was observed when the electrode was bent to approx. 45° and straightened multiple times.

Regenerable AgNPs-CdSNWs/Nanofilm as SERS substrates for sensitive detection of carbamate pesticides

The accurate detection of carbamate pesticides popularly employed in agricultural products is critical for reducing the threat of resultant residues to human health. In this work, a regenerable nanofilm used for SERS substrate was constructed by interfacially confined self-assembly incorporating CdS nanowires (CdSNWs) and Ag nanoparticles (AgNPs). The constructed AgNPs-CdSNWs/Nanofilm could significantly enhance the Raman signals of three carbamate pesticides (metolcarb, carbaryl and aldicarb-sulfone). A broad detection linear ranged 0.001-100 mg/L was achieved. The detection limits (LOD) of metolcarb, carbaryl and aldicarb-sulfone reached 0.00081 mg/L, 0.00081 mg/L and 0.00072 mg/L with coefficients of determination of (R2) of 0.992, 0.991 and 0.992, percent recovery ranged 86.5-104.9 %，88.2-105.1 % and 87.0-104.5 %, respectively, and relative standard deviation (RSD) values were all less than 4.0 %. Results showed that the user-friendly reproducible nanofilm could be employed as simple-to-establish SERS platform for rapid detection of carbamate pesticides in food.

Dual-mode colorimetric and chemiluminescence aptasensor for organophosphorus pesticides detection using aptamer-regulated peroxidase-like activity of TA-Cu

The residues of organophosphorus pesticides (OPs) in food pose a huge threat to human health. Therefore, the development of detection methods with simple design and high sensitivity is urgently needed. Here, a colorimetric/chemiluminescence (CL) dual-mode aptasensor strategy with high selectivity and sensitivity for detecting Parathion-methyl (PM) was designed based on aptamer-regulated nanozyme activity. The Parathion-methyl specific aptamer was anchored onto the surface of trimesic acid-Cu (TA-Cu) nanozyme, which can regulate the catalytic ability of TA-Cu nanozyme towards substrates and also serve as a specific recognition unit for PM. In the presence of PM, the aptamers bind to PM and detach from the surface of TA-Cu nanozyme, which effects the catalytic ability of TA-Cu nanozyme towards substrates. Based on the above experimental phenomena, a colorimetric/CL dual-mode aptasensor method for PM was developed, with the linear ranges of 0.01-20 and 1-100 ng/mL, the limit of detections of 0.004 and 0.45 ng/mL, respectively. More importantly, compared with most single mode analysis methods, this dual-mode sensing system can conduct self-inspection by comparing the detection results of each mode, thus improving the reliability of the detection results.

Molecularly Imprinted Polymers Coupled with Cellulosic Paper-Based Analytical Devices for Biosensing Applications

Molecularly imprinted polymers (MIPs) function as versatile and highly selective elements in biosensing, mimicking biomolecular receptors and effectively interacting with target analytes within complex matrices. Integrating MIPs with paper-based analytical devices (PADs) allows for rapid, convenient, and cost-effective deployment of molecular imprinting technologies. This review provides an overview of the advances in the fabrication process of MIP-PADs and explores their diverse applications, highlighting their utility in on-site detection using various detection mechanisms such as colorimetric, fluorometric, chemiluminescent electrochemical, photoelectrochemical, and surface enhanced Raman spectroscopy. The fabrication process involves synthesizing MIPs tailored for specific target analytes and incorporating them into cellulosic paper-based analytical devices, resulting in MIP-PADs that offer advantages such as affordability, portability, and disposability. Applications of MIP-PADs extend across environmental monitoring, food safety, and biomedical analysis, demonstrating exceptional selectivity and sensitivity toward diverse biomolecules, pathogens, and small molecules. Their affordability and user-friendly design make them particularly suitable for resource-limited settings. Lastly, the challenges and future prospects of MIP-PAD technologies are presented in the context of real-world applications.

Research Progress in the Extraction, Structural Characteristics, Bioactivity, and Commercial Applications of Oat β-Glucan: A Review

Oats (Avena sativa L.) are an important cereal crop with diverse applications in both food and forage. Oat β-glucan has gained attention for its beneficial biological activities, such as reducing cardiovascular risk, preventing diabetes, and enhancing intestinal health. Despite its potential, more comprehensive research is required to explore its preparation, modification, bioactivities, and applications. This review highlights recent advancements in the determination and preparation of oat β-glucan, explores its biological activities and mechanisms, and examines the impact of food processing techniques on its properties. This review is intended to provide a theoretical foundation and reference for the development and application of oat β-glucan in the functional food industry.

Direct and specific detection of methyl-paraoxon using a highly sensitive fluorescence strategy combined with phosphatase-like nanozyme and molecularly imprinted polymer

Methyl paraoxon (MP) is a highly toxic, efficient and broad-spectrum organophosphorus pesticide, which poses significant risks to ecological environment and human health. Many detection methods for MP are based on the enzyme catalytic or inhibition effect. But natural biological enzymes are relatively expensive and easy to be inactivated with a short service life. As a unique tool of nanotechnology with enzyme-like characteristics, nanozyme has attracted increasing concern. However, a large proportion of nanozymes lack the intrinsic specificity, becoming a main barrier of constraining their use in biochemical analysis. Here, we use a one-pot reverse microemulsion polymerization combine the gold nanoclusters (AuNCs) with molecularly imprinted polymers (MIPs), polydopamine (PDA) and hollow CeO2 nanospheres to synthesize the bright red-orange fluorescence probe (CeO2@PDA@AuNCs-MIPs) with high phosphatase-like activity for selective detection of MP. The hollow structure possesses a specific surface area and porous matrix, which not only increases the exposure of active sites but also enhances the efficiency of mass and electron transport. Consequently, this structure significantly enhances the catalytic activity by reducing transport distances. The introduced MIPs provide the specific recognition sites for MP. And Ce (III) can excite aggregation induced emission of AuNCs and enhance the fluorescent signal. The absolute fluorescence quantum yield (FLQY) of CeO2@PDA@AuNCs-MIPs (1.41 %) was 12.8-fold higher than that of the GSH-AuNCs (0.11 %). With the presence of MP, Ce (IV)/Ce (III) species serve as the active sites to polarize and hydrolyze phosphate bonds to generate p-nitrophenol (p-NP), which can quench the fluorescent signal through the inner-filter effect. The as-prepared CeO2@PDA@AuNCs-MIPs nanozyme-based fluorescence method for MP detection displayed superior analytical performances with wide linearities range of 0.45-125 nM and the detection limit of 0.15 nM. Furthermore, the designed method offers satisfactory practical application ability. The developed method is simple and effective for the in-field detection.

Origami 3D-microfluidic paper-based analytical device for detecting carbaryl using mesoporous silica-platinum nanoparticles with a molecularly imprinted polymer shell

Herein, we present a novel Origami 3D-μPAD for colorimetric carbaryl detection using a super-efficient catalyst, namely mesoporous silica-platinum nanoparticles coated with a molecularly imprinted polymer (MSN-PtNPs@MIP). Morphological and structural characterization reveals that coating MIP on the MSN-PtNPs surface significantly increases the selective area, leading to larger numbers of imprinting sites for improved sensitivity and selectivity in determining carbaryl. The as-prepared MSN-PtNPs@MIP was used for catalytic oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by H₂O₂. Carbaryl selectively binds to the cavities embedded on the MSN-PtNPs surface and subsequently inhibits TMB oxidation leading the color to change to light blue. The change of reaction color from dark blue to light blue depends on the concentration of carbaryl within the 3D-μPAD detection zone. This design integrates the advantages of highly efficient sample delivery through micro channels (top layer) and efficient partition/separation paths (bottom layer) of the cellulose substrate to achieve both improved detection sensitivity and selectivity. Assay on the Origami 3D-μPAD can determine carbaryl by ImageJ detection, over a dynamic range of 0.002-20.00 mg kg^-1, with a very low limit of detection at 1.5 ng g^-1. The developed 3D-μPAD exhibit high accuracy when applied to detect carbaryl in fruits, with satisfactory recoveries from 90.1% to 104.0% and relative differences from the reference HPLC values less than 5.0%. Furthermore, the fabricated Origami 3D-μPAD provides reliable durability and good reproducibility (3.19% RSD for fifteen devices).

Anchoring Cu Nanoclusters on Melamine-Formaldehyde Microspheres: A New Strategy for Triggering Aggregation-Induced Emission toward Specific Enzyme-Free Methyl Parathion Sensing

Methyl parathion (MP) residues have aroused extensive attention on account of their significant threat to the environment and food safety. Currently reported fluorescent methods used for MP sensing largely depend upon an enzyme. Designing a facile and specific enzyme-free MP fluorescent sensor is in great demand, which remains a challenge. Here, negatively charged Cu nanoclusters (CuNCs) anchored on positively charged melamine-formaldehyde (MF) microspheres (MF@CuNCs) through an electrostatic interaction were prepared. MF microspheres triggered aggregation-induced emission (AIE) of CuNCs and successfully circumvented the shortcomings of poor stability and low luminescence of CuNCs. The fluorescence intensity of MF@CuNCs can be quenched by p-nitrophenol produced by MP under alkaline conditions. Accordingly, a specific enzyme-free MP sensing method was constructed with MF@CuNCs. In combination with a smartphone, visually quantitative analysis of MP in a fast and portable way was also achieved. For the first time, AIE of CuNCs used for enzyme-free MP sensing was successfully explored in this work, and it is believed that this method will open a new pathway for AIE of CuNCs to be applied in various applications.

Nanozyme-encoded luminescent detection for food safety analysis: An overview of mechanisms and recent applications

With the rapid growth in global food production, delivery, and consumption, reformative food analytical techniques are required to satisfy the monitoring requirements of speed and high sensitivity. Nanozyme-encoded luminescent detections (NLDs) integrating nanozyme-based rapid detections with luminescent output signals have emerged as powerful methods for food safety monitoring, not only because of their preeminent performance in analysis, such as rapid, facile, low background signal, and ultrasensitive, but also due to their strong attractiveness for future sensing research. However, the lack of a full understanding of the fundamentals of NLDs for food safety detection technologies limits their further application. In this review, a systematic overview of the mechanisms of NLDs and their applications in the food industry is summarized, which covers the nanozyme-mimicking types and their luminescent signal generation mechanisms, as well as their applications in monitoring common foodborne contaminants. As demonstrated by previous studies, NLDs are bridging the gap to practical-oriented food analytical technologies and various opportunities to improve their food analytical performance to be considered in the future are proposed.

Paper-Based Molecular-Imprinting Technology and Its Application

Paper-based analytical devices (PADs) are highly effective tools due to their low cost, portability, low reagent accumulation, and ease of use. Molecularly imprinted polymers (MIP) are also extensively used as biomimetic receptors and specific adsorption materials for capturing target analytes in various complex matrices due to their excellent recognition ability and structural stability. The integration of MIP and PADs (MIP-PADs) realizes the rapid, convenient, and low-cost application of molecular-imprinting analysis technology. This review introduces the characteristics of MIP-PAD technology and discusses its application in the fields of on-site environmental analysis, food-safety monitoring, point-of-care detection, biomarker detection, and exposure assessment. The problems and future development of MIP-PAD technology in practical application are also prospected.

A biomimetic enzyme-linked immunosorbent assay (BELISA) for the analysis of gonadorelin by using molecularly imprinted polymer-coated microplates

An original biomimetic enzyme-linked immunoassay (BELISA) to target the small peptide hormone gonadorelin is presented. This peptide has been recently listed among the substances banned in sports by the World Antidoping Agency (WADA) since its misuse by male athletes triggers testosterone increase. Hence, in response to this emerging issue in anti-doping controls, we proposed BELISA which involves the growth of a polynorepinephrine (PNE)-based molecularly imprinted polymer (MIP) directly on microwells. PNE, a polydopamine (PDA) analog, has recently displayed impressive performances when it was exploited for MIP preparation, giving even better results than PDA. Gonadorelin quantification was accomplished via a colorimetric indirect competitive bioassay involving the competition between biotinylated gonadorelin linked to the signal reporter and the unlabeled analyte. These compete for the same MIP binding sites resulting in an inverse correlation between gonadorelin concentration and the output color signal (λ = 450 nm). A detection limit of 277 pmol L-1 was achieved with very good reproducibility in standard solutions (avCV% = 4.07%) and in urine samples (avCV% = 5.24%). The selectivity of the assay resulted adequate for biological specimens and non-specific control peptides. In addition, the analytical figures of merit were successfully validated by mass spectrometry, the reference anti-doping benchtop platform for the analyte. BELISA was aimed to open real perspectives for PNE-based MIPs as alternatives to antibodies, especially when the target analyte is a poorly or non-immunogenic small molecule, such as gonadorelin. Biomimetic enzyme-linked immunosorbent assay (BELISA).

Sensitive and selective detection of carbamazepine in serum samples by bionic double-antibody sandwich method based on cucurbit[7]uril and molecular imprinted polymers

A novel bionic enzyme-linked immunosorbent assay (BELISA) based on double-antibody sandwich method is firstly designed for the detection of carbamazepine (CBZ) in human serum samples. In this BELISA system, cucurbit[7]uril (CB[7]) is employed as an artificial capture antibody (cAb), and molecularly imprinted polymers (MIPs) is used as an artificial detection antibody (dAb). Nanozymes (PdNPs) as signal generators are integrated with MIPs. This couple of bionic antibodies exhibits not only the excellent physical and chemical stability, but also the superior molecular recognition ability. Based on two bionic antibodies that can selectively recognize different sites of CBZ molecule, a new BELISA method has been constructed for the first time. The proposed BELISA method displays a good linear relationship ranging from 2 to 20 μg mL^-1. The detection limit is 0.37 μg mL^-1, which can well meet clinical testing demand. It provides a more stable and economical method for clinical therapeutic drug monitoring (TDM).

Activated Porous Carbon Supported Pd and ZnO Nanocatalysts for Trace Sensing of Carbaryl Pesticide in Water and Food Products

Nanomaterials-based sensors are a dire need for credible and accurate determination of pesticides in water and food samples as a monitoring tool. Herein, electrocatalysts of Pd and ZnO NPs supported...

Functional Hybrid Micro/Nanoentities Promote Agro-Food Safety Inspection

The rapid development of nanomaterials has provided a good theoretical basis and technical support to solve the problems of food safety inspection. The combination of functionalized composite nanomaterials and well-known detection methods is gradually applied to detect hazardous substances, such as chemical residues and toxins, in agricultural food products. This review concentrates on the latest agro-food safety inspection techniques and methodologies constructed with the assistance of new hybrid micro/nanoentities, such as molecular imprinting polymers integrated with quantum dots (MIPs@QDs), molecular imprinting polymers integrated with upconversion luminescent nanoparticles (MIPs@UCNPs), upconversion luminescent nanoparticles combined with metal-organic frameworks (UCNPs@MOFs), magnetic metal-organic frameworks (MOFs@Fe₃O₄), magnetic covalent-organic frameworks (Fe₃O₄@COFs), covalent-organic frameworks doped with quantum dots (COFs@QDs), nanobody-involved immunoassay for fast inspection, etc. The presented summary and discussion favor a relevant outlook for further integrating various disciplines, like material science, nanotechnology, and analytical methodology, for addressing new challenges that emerge in agro-food research fields.

Detection of microbial contamination based on uracil-selective synthetic receptors

The here presented work is focused on the development of a method for detection of microbial contamination of food based on uracil-selective synthetic receptors. Because uracil may serve as an indicator of bacterial contamination, its selective and on-site detection may prevent spreading of foodborne diseases. The synthetic receptors were created by molecular imprinting. Molecularly imprinted polymers for selective uracil isolation were prepared by a non-covalent imprinting method using dopamine as a functional monomer. Detection of isolated uracil was performed by capillary electrophoresis with absorption detection (λ - 260 nm). The conditions of preparation of molecularly imprinted polymers, their binding properties, adsorption kinetics and selectivity were investigated in detail. Furthermore, the prepared polymer materials were used for selective isolation and detection of uracil from complex samples as tomato products by miniaturized electrophoretic system suggesting the potential of in situ analysis of real samples.

Fluorescent and Colorimetric Dual-signal Enantiomers Recognition via Enzyme Catalysis: The Case of Glucose Enantiomers Using Nitrogen-doped Silicon Quantum Dots/Silver Probe Coupled with β-D-Glucose Oxidase

Chiral enantiomer recognition is important but facing tough challenges in the direct quantitative determination for complex samples. In this work, via chosing nitrogen-doped silicon quantum dots (N-SiQD) as optical nanoprobe and constructing N-SiQD/silver (N-SiQD/Ag NPs) complex, β-D-GOx as model enzyme and glucose enantiomers as analytes, a fluorescent and colorimetric dual-signal chiral sensing strategy was proposed herein for chiral recognition based on specific enzyme-catalyzed reaction. N-SiQD can exhibit intense fluorescence, while it can be quenched by Ag NPs owing to the formation of N-SiQD/Ag NPs. In the presence of glucose isomer, D-glucose is catalytically hydrolyzed by β-D-GOx to form H₂O₂ owing to the specific enzyme catalyzed reaction between D-glucose and β-D-GOx, and H₂O₂ can etch Ag NPs from the N-SiQD/Ag NPs probe to change the solution color from brown to colorless and restore the N-SiQD fluorescence; while these phenomena cannot be caused by L-glucose, a dual-signal sensing method was thus constructed for recognizing glucose enantiomers. It is believed that the chiral enantiomers recognition strategy via enzyme catalysis has great application for selective and quantificational detection of enantiomers in the complex sample system.

A copper nanoparticle-based electrochemical immunosensor for carbaryl detection

A hapten-protein conjugate with copper nanoparticles (Hap-Car-BSA@CuNPs) was first synthesized in the present work for the determination of carbaryl. The copper nanoparticles (CuNPs) of the conjugate were used as electrochemical labels in the direct solid-phase competitive determination of carbaryl residues in flour from different crops. The signal was read by linear sweep anodic stripping voltammetry (LSASV) of copper (through the electrochemical stripping of accumulated elemental copper) on a gold-graphite electrode (GGE). To form a recognition receptor layer of monoclonal antibodies against the carbaryl on the surface of the GGE, 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC) and 1-hydroxy-2,5-pyrrolidinedione (NHS) were used as the best covalent cross-linkers. The concentrations of the antibodies and the Hap-Car-BSA@CuNPs conjugate were optimized for carbaryl detection by the electrochemical immunosensor. The electrochemical immunosensor can be used for highly sensitive determination of carbaryl residues in flour samples in the concentration range 0.8-32.3 μg·kg^-1, with a limit of detection 0.08 μg·kg^-1. The present work paves the path for a novel method for monitoring carbaryl in other food products, drinks, and soil samples.

Molecularly imprinted polymer-enhanced biomimetic paper-based analytical devices: A review

The popularization of paper-based analytical devices (PADs) in analytical science has fostered research on enhancing their analytical performance for accurate and sensitive assays. With their superb recognition capability and structural stability, molecularly imprinted polymers (MIPs) have been extensively employed as biomimetic receptors for capturing target analytes in various complex matrices. The integration of MIPs as recognition elements with PADs (MIP-PADs) has opened new opportunities for advanced analytical devices with elevated selectivity and sensitivity, as well as a shorter assay time and a lower cost. This review covers recent advances in MIP-PAD fabrication and engineering based on multifarious signal transduction systems such as colorimetry, fluorescence, electrochemistry, photoelectrochemistry, and chemiluminescence. The application of MIP-PADs in the fields of biomedical diagnostics, environmental analysis, and food safety monitoring is also reviewed. Further, the advantages, challenges, and perspectives of MIP-PADs are discussed.

Competitive plasmonic biomimetic enzyme-linked immunosorbent assay for sensitive detection of bisphenol A

A plasmonic biomimetic enzyme-linked immunosorbent assay (PBELISA) method was developed for ultrasensitive and on-site visual detection of bisphenol A (BPA). The PBELISA was an enzyme-linked immunoassay using molecularly imprinted polymer (MIP) film as biomimetic antibody combined with catalase (CAT)-mediated growth of plasmonic gold nanoparticles (AuNPs). With the BPA concentration increased, a distinguished color change was observed from colorless to blue and then red. Therefore, the proposed method could be employed with naked-eye observation to detect BPA with visual limit of detection (LOD) of 40 pg/mL. For quantitative analysis, this method also exhibited a good dynamic linear response to the logarithmic BPA concentrations ranged from 10 pg/mL to 1.024 × 10⁴ pg/mL with a correlation coefficient of R² = 0.9922 and LOD of 6.20 pg/mL. The recovery rates in tap water, milk and orange juice ranged from 91.83% to 107.39%. In brief, the developed PBELISA method is sensitive, cost-effective and easy-to-use for BPA detection.

Fluorometric determination of tyramine by molecularly imprinted upconversion fluorescence test strip

A fluorometric method based on molecularly imprinted upconversion fluorescence test strip was developed for the determination of tyramine. It exploited the green fluorescence of upconversion nanoparticles (UCNPs) and the specific recognition property of molecularly imprinted polymers (MIPs). UCNPs were attached to filter paper with glue, and MIPs were prepared via in situ polymerization on the surface of UCNPs by using tyramine as template, methacrylic acid as functional monomer, and ethylene glycol dimethacrylate as cross-linker. The green fluorescence of the test strip, with excitation/emission wavelength 980/550 nm, was enhanced by tyramine. The test strip was suitable for the determination of tyramine in the linear range 1.0-100.0 mg L^-1, and a relatively low limit of detection (0.2 mg L^-1) was achieved. The test strip also worked well for the quantitation of tyramine in spiked red wine and mature vinegar. Recoveries are ranged from 84.9 to 99.9%. The relative standard deviations are below 5.6%. Graphical abstract.

Structural basis of quinolone derivatives, inhibition of type I and II topoisomerases and inquiry into the relevance of bioactivity in odd or even branches with molecular docking study

The structural modification of quinolone derivatives has been a hot spot in recent years, especially the modification of the N-1 position, which is the part that this article focuses on. In this paper, series of synthesized quinoline quaternary ammonium salts with odd and even carbon number alkyl groups in N-1 position were used to explain the influence of the alkyl side chain on activity. With respect to all the recently synthesized twenty products, the biological activity results exhibited significant antitumor and antibacterial activity with obvious differences in the target alkyliodine substituted compounds and the antibacterial activities apparently had the prominent odd-carbon number predominance. Compound 8-((4-(benzyloxy)phenyl)amino)-7-(ethoxycarbonyl)-5-propyl-[1,3]dioxolo[4,5-g]quinolin-5-ium (4d) was found to be the most potent derivative with IC₅₀ values of 4 ± 0.88, 4 ± 0.42, 14±1.96, and 32±3.66 against A-549, Hela, SGC-7901, and L-02 cells, respectively, stronger than the positive control 5-FU and MTX. Furthermore, it had the most potent bacterial inhibitory activity of MIC value against E. coli (ATCC 29213) and Staphylococcus aureus (ATCC 8739) at 3.125 nmol mL⁻¹. With respect to molecular simulations, in order to illustrate the possible mechanism of the difference between the series of compounds in the even or odd carbon chain alkyliodine substitution, this paper simulated the conceivable mode and explained the main interactions. Finally, we could find that the position and proportion of hydrogen bonds and other interactions in each series were regarded as the main reasons for this difference in activity.

Sensitive and selective determination of butyl benzyl phthalate from environmental samples using an enzyme immunoassay

Increased awareness of phthalic acid esters (PAEs) toxicity has given rise to a dramatic increase in concern about the determination of these contaminations in the environment. In this paper, a sensitive, selective and rapid enzyme immunoassay of ELISA based on polyclonal antibody for detecting butyl benzyl phthalate (BBP) was developed and applied in the environmental water and soil samples. The hapten of BBP was synthesized, then applied to prepare artificial antigen and produce polyclonal antibody capable of specific recognizing BBP. From the optimal standard curve of ELISA for BBP, the values of LOD (limit of detection, IC₁₀) and IC₅₀ were 2.5 and 79.4 ng/mL, respectively. The ELISA showed high specificity, with the cross-reactivity toward BBP analogs < 9.6%. The satisfactory accuracy and precision were demonstrated by the recoveries of 76-116% and coefficient of variations (CVs) of 4.7-13.7%. Furthermore, BBP contamination was investigated at 3.1-25.2 ng/mL in real water samples and 4.2-76.4 ng/g in real soil samples (with the detection rate of 55% in 20 samples) by the developed ELISA, which also had shown a good correlation with that the results obtained by HPLC. All of this indicated that the developed enzyme immunoassay could be applied for sensitive and selective determination of BBP contamination in the environmental samples. Furthermore, the strategy of BBP hapten synthesis and an alternative method of BBP determination could be provided.

Analytical methods to analyze pesticides and herbicides

Presented in this paper is an annual review of literatures published in 2018 on topics relating to analytical methods for pesticides and herbicides. According to the different techniques, this review is divided into six sections, including extraction methods; chromatographic or mass spectrometric techniques; electrochemical techniques; spectrophotometric techniques; chemiluminescence and fluorescence methods; and biochemical assays. PRACTITIONER POINTS: Totally 134 relevant research articles are summarized. The review is divided into six parts according to the techniques. Chromatographic and mass spectrometric methods are the most widely used.

Zearalenone Contamination in Corn, Corn Products, and Swine Feed in China in 2016-2018 as Assessed by Magnetic Bead Immunoassay

In total, 405 samples of corn, corn products, and swine feed from China in 2016-2018 were surveyed for zearalenone (ZEN) contamination using a magnetic bead immunoassay-coupled biotin-streptavidin system (BAS-MBI). The developed BAS-MBI had a limit of detection (LOD) of 0.098 ng mL-1, with half-maximal inhibition concentration (IC50) of 0.71 ng mL-1 in working buffer, and an LOD of 0.98 ng g-1; the detection range was from 0.98 to 51.6 ng g-1 in authentic agricultural samples. The BAS-MBI has been demonstrated to be a powerful method for the rapid, sensitive, specific, and accurate determination of ZEN. The ZEN positivity rate reached the highest level of 40.6% in 133 samples in 2016; ZEN levels ranged from 1.8 to 1100.0 ng g-1, with an average level of 217.9 ng g-1. In 2017, the ZEN positivity rate was the lowest at 24.5% in 143 samples; ZEN levels ranged from 1.1 to 722.6 ng g-1, with an average of 166.7 ng g-1. In 2018, the ZEN positivity rate was 31.8% in 129 samples; ZEN levels ranged from 1.3 to 947.8 ng g-1, with an average of 157.0 ng g-1. About 20% of ZEN-positive samples exceeded maximum limit levels. An alternative method of ZEN detection and a valuable reference for ZEN contamination in corn and its related products in China are provided. This survey suggests the need for prevention of serious ZEN contamination, along with management for food safety and human health.

Development of an immunoassay for the detection of carbaryl in cereals based on a camelid variable heavy-chain antibody domain

BACKGROUND

The variable domain of camelid heavy-chain antibodies (VHH) is increasingly being adapted to detect small molecules in various matrices. The insecticide carbaryl is widely used in agriculture while its residues have posed a threat to food safety and human health.

RESULTS

VHHs specific for carbaryl were generated from an alpaca immunized with the hapten CBR1 coupled to keyhole limpet hemocyanin. An enzyme-linked immunosorbent assay (ELISA) based on the VHH C1 and the coating antigen CBR2-BSA was developed for the detection of carbaryl in cereals. This assay, using an optimized assay buffer (pH 6.5) containing 10% methanol and 0.8% NaCl, has a half-maximum signal inhibition concentration of 5.4 ng mL^-1 and a limit of detection (LOD) of 0.3 ng mL^-1 for carbaryl, and shows low cross reactivity (≤0.8%) with other tested carbamates. The LOD of carbaryl using the VHH-based ELISA was 36 ng g^-1 in rice and maize and 72 ng g^-1 in wheat. Recoveries of carbaryl in spiked rice, maize and wheat samples were in the range of 81-106%, 96-106% and 83-113%, respectively. Relative standard deviations of repeatability and intra-laboratory reproducibility were in the range of 0.8-9.2% and 2.9-9.7%, respectively.

CONCLUSION

The VHH-based ELISA was highly effective in detecting carbaryl in cereal samples after simple sample extraction and dilution. © 2019 Society of Chemical Industry.

A Novel CdSe/ZnS Quantum Dots Fluorescence Assay Based on Molecularly Imprinted Sensitive Membranes for Determination of Triazophos Residues in Cabbage and Apple

In the present study we have developed a direct competitive CdSe/ZnS quantum dot (QD) fluorescence assay based on micro-array-imprinted membranes for the determination of triazophos in cabbage and apple. The imprinted membranes were directly synthesized on the surface of a 96-well plate by thermal polymerization using triadimefon as the dummy template. Under optimal conditions, the assay showed an excellent linear response over the concentration ranges of 0.1-10,000 μg L-1 with a good coefficient of determination (R 2= 0.982). The sensitivity (IC50) and limit of detection (LOD, expressed as IC15) of the developed assay were 3.63 mg L-1 and 0.31 μg L-1, respectively. The applicability of the developed approach was tested for detecting triazophos in incurred samples. The method showed excellent recoveries (109.6-118.9%) and relative standard deviations (RSDs) between 9.9 and 19.5%. The obtained results correlated well with those obtained by LC-MS/MS (R 2= 0.9995). The competitive assay using CdSe/ZnS QDs as fluorescence-labeled probe showed good sensitivity, steady and fast response, and excellent anti-interference ability compared to conventional fluorescence-quenching methods. Finally, the feasibility of the proposed methodology was successfully applied for detection of triazophos in real samples.

A PET/paper chip platform for high resolution sulphur dioxide detection in foods

A convenient assay platform comprising a PET/paper chip (PP-chip) and a smart analytical device is developed for detection of sulphur dioxide (SO₂) concentration. In the presented approach, the distilled SO₂ solution is dropped onto the detection region of the PP-chip and undergoes a reaction with an acid-based reagent. The resulting color variation is analyzed through a high-resolution camera (CMOS) and the reacted image is processed by a RGB (red, green and blue) analytical app installed on a smartphone. Results show that the known SO₂ concentrations ranging from 10 to 300 ppm indicate that the high linear relationship (R² = 0.9981) between the (R (red) + G (green) - B (blue)) value and SO₂ concentration. Moreover, a high measurement resolution is equal to 1.45 ppm/a.u. The presented assay platform was proved to detect the SO₂ concentrations of twenty-five practical food samples. Compared with the developed assay platform and certified inspection technique, the deviation of SO₂ measurement does not exceed 3.82%. It was satisfactory to apply this developed assay platform to analyze the SO₂ concentration in the practical samples.

Application of Antibody-Powered Triplex-DNA Nanomachine to Electrochemiluminescence Biosensor for the Detection of Anti-Digoxigenin with Improved Sensitivity Versus Cycling Strand Displacement Reaction

The accurate and rapid quantitative detection of antibodies had a significant influence in controlling and preventing disease or toxin outbreaks. In this work, we first introduce the antibody-powered triplex-DNA nanomachine to release cargo DNA as a substitute target for sensitive electrochemiluminescence (ECL) detection of anti-digoxigenin based on a novel ternary ECL system. It is worth noting that the cargo DNA as a substitute target of antibody can further participate in an enzyme-assisted cycling strand displacement reaction to achieve ECL signal amplification and improve the sensitivity of antibody detection. Additionally, porous palladium nanospheres with a considerable catalytic activity were first applied as a coreaction accelerator to efficiently enhance the intensity of the ECL system of rubrene microblocks as luminophore and dissolved O₂ as an endogenous coreactant. With the resultant ternary ECL system as a biosensing platform, a significantly enhanced initial signal was achieved in advance. Then, the ferrocene-labeled quenching probes were employed to reduce initial signal and obtain the low-background signal. Eventually, the cargo DNA made the quenching probes release and recover the signal in the presence of anti-digoxigenin. Thereupon, the wide linear range (0.01-200 nM) and low limit of detection (6.7 pM) were obtained, and this method not only reduces conjugation steps but also provides a sensitive and novel ECL analysis platform for the trace detection of other antibodies and antigen.

Simultaneous detection and determination of mercury (II) and lead (II) ions through the achievement of novel functional nucleic acid-based biosensors

The serious threats of mercury (Hg²⁺) and lead (Pb²⁺) ions for the public health makes it important to achieve the detection methods of the ions with high affinity and specificity. Metal ions usually coexist in some environment and foodstuff or clinical samples. Therefore, it is very necessary to develop a fast and simple method for simultaneous monitoring the amount of metal ions, especially when Hg²⁺ and Pb²⁺ coexist. DNAzyme-based biosensors and aptasensors have been highly regarded for this purpose as two main groups of the functional nucleic acid (FNA)-based biosensors. In this review, we summarize the recent achievements of functional nucleic acid-based biosensors for the simultaneous detection of Hg²⁺ and Pb²⁺ ions in two main optical and electrochemical groups. The tremendous interest in utilizing the various nanomaterials is also highlighted in the fabrication of the FNA-based biosensors. Finally, some results are presented based on the advantages and disadvantages of the studied FNA-based biosensors to compare their validation.

Molecularly Imprinted Polymer as an Antibody Substitution in Pseudo-immunoassays for Chemical Contaminants in Food and Environmental Samples

The chemical contaminants in food and the environment are quite harmful to food safety and human health. Rapid, accurate, and cheap detection can effectively control the potential risks derived from these chemical contaminants. Among all detection methods, the immunoassay based on the specific interaction of antibody-analyte is one of the most widely used techniques in the field. However, biological antibodies employed in the immunoassay usually cannot tolerate extreme conditions, resulting in an unstable state in both physical and chemical profiles. Molecularly imprinted polymers (MIPs) are a class of polymers with specific molecular recognition abilities, which are highly robust, showing excellent operational stability under a wide variety of conditions. Recently, MIPs have been used in biomimetic immunoassays for chemical contaminants as an antibody substitute in food and the environment. Here, we reviewed these applications of MIPs incorporated in different analytical platforms, such as enzyme-linked immunosorbent assay, fluorescent immunoassay, chemiluminescent immunoassay, electrochemical immunoassay, microfluidic paper-based immunoassay, and homogeneous immunoassay, and discussed current challenges and future trends in the use of MIPs in biomimetic immunoassays.

Molecularly imprinted polymer nanoparticle-based assay (MINA): application for fumonisin B1 determination

The enzyme-linked immunosorbent assay (ELISA) has been used as a standard tool for monitoring food and animal feed contamination from the carcinogenic fumonisin B1 (FB1).