Evaluation studies on the combined effect of hydrothermal treatment and octenyl succinylation on the physic-chemical, structural and digestibility characteristics of sweet potato starch

Enhancing Kodo millet starch-based hybrid gel for fat replacement in cookies: Dual modification (heat treatment-octenyl succinic anhydride) for improved properties

In this study, Kodo millet starch was modified using dry heat treatment and heat-moisture treatment, followed by esterification with 3 % octenyl succinic anhydride to enhance its functional and structural properties for hybrid gel formulation and application as a fat replacer in cookies. Heat treatment before esterification significantly increased the degree of substitution (0.0068 to 0.0109) and particle size (9.22 to 10.43 μm). Morphological analysis revealed irregularities and aggregation, while X-ray diffraction indicated reduced crystallinity. The modified starches exhibited non-Newtonian, shear-thinning behavior with stronger gel elasticity. The dual-modified starch in hybrid gel formulations exhibited effective stabilization over 30 days, with improved emulsification properties. When used in reduced-fat cookies, they maintained acceptable texture and appealing color at both 50 % and 100 % shortening replacement levels. The organoleptic analysis confirmed that cookies with 100 % shortening replacement had increased overall acceptability, indicating the potential of dual-modified starch hybrid gels as effective fat replacers.

Fabrication of poly(vinyl alcohol)/sulfonated itaconic starch blend film with enhanced antibacterial performance and soil absorption capacity for environment-friendly packaging

Plastic packaging is widely used due to its light weight, ease of processing, and cost-effectiveness, but improper disposal causes environmental pollution and resource waste. Developing environment-friendly packaging materials is urgent. Herein, a water-soluble poly(vinyl alcohol) (PVA)/starch blend film was proposed by combining modification and thermal processing, and its performance was evaluated. Starch was modified via a three-step process-acid hydrolysis, itaconic anhydride esterification, and sodium bisulfite sulfonation-to produce sulfonated itaconic starch. The introduction of carboxyl and sulfonic groups improved the hydrophilicity of PVA/starch blends. The water contact angle of the modified blend film was notably decreased in comparison to that unmodified one. The blend films also demonstrated an enhancement in UV shielding properties, effectively reducing rhodamine B photodegradation under extended UV exposure. Besides, the incorporated groups improved the antibacterial performance of the blend film, exhibiting the efficient enhancement on the antibacterial effects on both E. coli and S. aureus. Moreover, the film exhibited the good soil absorption capacity, dissolving completely in soil within 12 h, highlighting its potential for environment-friendly food packaging applications.

Recent developments in non-starch Ipomoea batatas (L.) Lam. polysaccharides: extractions and purifications, structural characteristics, pharmacological activities, structure-activity relationships, and applications A review

Ipomoea batatas (L.) Lam. (I. batatas) is highly regarded by consumers and researchers in medicine and food due to their high yield and rich nutritional value. Due to the difficulty in applying starch polysaccharides from I. batatas in drug development, non-starch polysaccharides with rich pharmacological activity have become a research hotspot in recent years. Non-starch I. batatas polysaccharide has been proven to contain a variety of pharmacological activities, including immune regulation, improvement of intestinal microbiota, gastric protection, liver protection, anti-tumor, anti-inflammatory, anti-oxidant, anti-glycosylation, and anti-diabetes. At the same time, in addition to traditional extraction methods, researchers have also utilized various new extraction methods such as isoelectric point precipitation, hot reflux extraction, and ultra-high pressure extraction to obtain non-starch I. batatas polysaccharides with various conformational features, including cyclic and chain structures. Its rich pharmacological activities and diverse chemical structures provide clear guidance for elucidating of its structure-activity relationships and developing products in fields such as medicine and food. Based on this, this article reviews the research progress on the extraction and purification methods, structural characteristics, pharmacological activities, structure-activity relationships, and applications of non-starch I. batatas polysaccharides in recent years, providing theoretical guidance for future research on non-starch I. batatas polysaccharides.

A comparative study of starch granule-associated proteins/lipids on short-term and long-term retrogradation of normal and waxy corn starches

To evaluate the contribution of starch granule-associated proteins/lipids (SGAPs/SGALs) to the short- and long-term retrogradation of starch, a comparative study was conducted using normal and waxy corn starches. Following the removal of SGAPs, peak viscosity (3504.71 cP) and breakdown viscosity (1659.20 cP) significantly increased, while pasting temperature (74.31 °C) significantly decreased, compared to SGALs-removed (3131.00 cP, 1229.80 cP, 75.46 °C) and native normal corn starches (2704.40 cP, 794.60 cP, 79.30 °C). Rheological profiles further revealed that the removal of SGAPs/SGALs effectively promoted the short-term retrogradation of amylose, as evidenced by larger hysteresis rings and higher consistency indices (K) in the SGAPs/SGALs-removed starch gel. While SGAPs removal also greatly facilitated amylopectin recrystallization and double helix structure aggregation than removal of SGALs, thereby significantly increased the retrogradation enthalpy (from 6.48 to 7.37 J g-1) and gel hardness (from 461.26 gf to 518.31 gf) in normal corn starch after 14 days of storage, while no notable differences were observed in their corresponding waxy counterparts after both treatments. In conclusion, SGAPs showed significant superiority over SGALs in accelerating both short- and long-term retrogradation of normal corn starch, while both had minimal impact on waxy corn starch.

Development of an amorphous octenyl succinate anhydride starch-based emulsion to improve the stability and bioaccessibility of phloretin

Phloretin (PHT) is a natural functional compound with antioxidant properties. However, its poor water solubility and high sensitivity to extreme pH environments, oxygen, and high temperatures limit its absorption and stability. Therefore, in this study, amorphous octenyl succinic anhydride starch (AOS) was employed to enhance the stability of PHT-loaded emulsions, and characteristics of these emulsions were evaluated. In total, three AOS samples with varying degrees of amorphous were prepared as emulsifiers. Notably, amorphous starch prepared at 90 °C was found to stabilize the emulsion by forming a superior gel network structure, facilitating the efficient loading of PHT and protecting this compound from degradation in extreme environments. Finally, in vitro digestion and release experiments confirmed the effectiveness of these emulsions in PHT delivery. Compared to the existing β-cyclodextrin-PHT drug delivery system, the prepared emulsion exhibited superior PHT release at the site of intestinal absorption. Therefore, the emulsions established in this study show promise as PHT delivery systems for future applications in the food industry.

Effects of different heat treatment methods on physicochemical characteristics and in vitro digestibility of sweet potato flour and its application in meal replacement flour

This study examined the effects of various heat treatments on physicochemical properties, functionality, and starch digestibility of sweet potato flour. Heat treatments darkened the color but did not change the chemical structure. Solubility decreased and swelling power increased (17.3%-18.3%) with baking, frying, and microwaving, while extrusion and steaming had opposite effects. Rapidly digestible starch content increased (8.96%-41.91%) in all treatments except steaming, which reduced slowly digestible starch (61.81%-28.97%). Based on the analysis of these studies, using low-temperature baked and extruded sweet potato flour as the main raw material, combined with the concept of complete nutrition, supplemented by nutritious ingredients such as quinoa, oats, and whey protein, we have successfully developed two sweet potato meal replacement flours (SP-1 and SP-2) and found they had good brewing properties and showed shear-thinning behavior. This study provided theoretical basis for sweet potato deep processing and functional product development. PRACTICAL APPLICATION: This paper studied the effects of different heat treatments on sweet potato flour, and developed two meal replacement flour based on this, to provide a theoretical basis for the application of the sweet potato industry.

Octenylsuccinylation strategy to construct high-amylose maize starch-myristic acid complexes with high thermal stability, complexation efficiency and anti-retrogradation ability

Gelatinizing high-amylose maize starch (HAMSt) requires high temperatures to allow complexation with lipids, making it a challenging process. An octenylsuccinylation method was examined as a part of a strategy to decrease the gelatinization temperature of HAMSt, thereby promoting the complexation between HAMSt and myristic acid (MAc). Octenyl succinic anhydride (OSA) modification of HAMSt reduces the onset gelatinization temperature of HAMSt from 71.63 °C to 66.97 °C. Moreover, as the OSA concentration increased from 2 % to 11 %, the degree of substitution and molecular weights of the esterified HAMSt gradually increased from 0.0069 to 0.0184 and from 0.97 × 106 to 1.17 × 106 g/mol, respectively. Fourier transform infrared analysis indicated that the octenyl-succinate groups were grafted onto the HAMSt chains. The formation of HAMSt-MAc complexes improved the thermal stability of OSA-treated HAMSt (peak temperature increased by 0.11 °C-13.95 °C). Moreover, the diffraction intensity of the V-type peak of the 11 % sample was greater than that of other samples. Finally, the anti-retrogradation ability was in the order of OSA-HAMSt-MAc complexes > HAMSt-MAc complexes > HAMSt. Overall, our results indicate that octenylsuccinylation can be an effective strategy to promote the formation of OSA-HAMSt-MAc complexes and delay starch retrogradation.

Ozone induced structural variation in OSA waxy rice starch: Effects on the thermal behavior of starch and its stabilized pickering emulsion

Waxy rice starch (St) was modified by pre-OSA esterification reaction followed by ozone treatment. The molecular structure of this modified product (OSA-OSt) was characterized, and the thermal behaviors and its stabilized Pickering emulsion were evaluated. 1HNMR and XPS results discovered that ozone initially oxidized the hydroxyl groups in the amorphous region of starch (preferentially C2/C3) along with a degree of crosslinking, enhancing the molecular orderliness. This led to an increase in water-holding capability (29.15%) and swelling power (52.8 g/g), and a decrease in solubility (0.35%). TGA, RVA, and DSC indicated that oxidation-induced crosslinking within a brief treatment period enhanced the starch's thermal stability. The structural change enabled the formation of a weak gel structure during the heating process, which displayed high thermal and freeze-thaw stability. The work proves ozone is an effective way of improving the thermal behavior of OSA-starch and its emulsion for subsequent applications in numerous food products.

Effect of cation valence on the retrogradation, gelatinization and gel characteristics of maize starch

This study aimed to examine the impact of trivalent, divalent, or monovalent cations dissolving into water and being mixed with maize starch to influence its retrogradation, gelatinization, and gel characteristics. The result of the analysis using a differential scanning calorimeter showed that all cations raised the peak of gelatinization temperature of maize starch, especially Al3+ or Fe3+, while trivalent cations reduced the enthalpy. The result of the analysis using a rapid viscosity analyzer showed that trivalent cation caused lower trough viscosity, final viscosity, and pasting temperature but higher breakdown viscosity of maize starch than monovalent or divalent cations. Confocal laser scanning microscopy showed that the cation promoted the destruction of gelatinized maize starch granules, especially Zn2+, Fe3+, or Al3+. Additionally, trivalent Fe3+ or Al3+ caused higher gel strength of maize starch. Generally, the cation with higher valence changed more retrogradation, gelatinization, and gel characteristics of maize starch.

Effect of plasma-activated water on the quality of wheat starch gel-forming 3D printed samples

In this study, a new method for preparing gels suitable for 3D printing of food structures using wheat starch and plasma activated water (PAW) is presented. The investigation focused on the effect of PAW on starch pasting and the final 3D printed product. It was found that the use of PAW for 15 min in the preparation of wheat starch gels optimized carrier stability and improved height retention in the printed constructs, showing significant shape retention even after prolonged storage. This durability can be attributed to the hindrance of polymerization between starch molecules and the promotion of intermolecular starch polymerization when reactive groups and ions are integrated into the starch structure. The incorporation of PAW with soluble reactive groups, ions and acidity not only accelerates the breakdown of the starch molecules but also facilitates additional hydrogen bonding within the double helix, which strengthens the structure of the gel. This interaction accelerates the retrogradation of the starch, thereby enhancing its overall stability. This study provides a new green approach to modify the 3D printing properties of starch gels.

Assessing the impact of plasma-activated water-assisted heat-moisture treatment on the extrusion-recrystallization process of hausa potato starch

The study explored the plasma-activated water (PAW)-assisted heat-moisture treatment (HMT) on the structural, physico-chemical properties, and in vitro digestibility of extrusion-recrystallized starch. Native starch of hausa potatoes underwent modification through a dual process involving PAW-assisted HMT (PHMT) followed by extrusion-recrystallization (PERH) using a twin-screw extruder. The PHMT sample showed surface roughness and etching with a significantly greater (p ≤ 0.05) RC (20.12 %) and ΔH (5.86 J/g) compared to DHMT. In contrast, PERH-induced structural damage, resulting in an irregular block structure, and altered the crystalline pattern from A to B + V-type characterized by peaks at 17.04°, 19.74°, 22°, and 23.94°. DSC analysis showed two endothermic peaks in all the extrusion-recrystallized samples, having the initial peak attributed to the melting of structured amylopectin chains and the second one linked to the melting of complexes formed during retrogradation. Dual-modified samples displayed notably increased transition temperatures (To1 74.54 and 74.17 °C, To2 122.65 and 121.49 °C), along with increased RS content (43.76 %-45.30 %). This study envisages a novel approach for RS preparation and broadens the utilization of PAW in starch modification synergistically with environmentally friendly techniques.

Effect of dual modifications with ultrasonication and succinylation on Cicer arietinum protein-iron complexes: Characterization, digestibility, in-vitro cellular mineral uptake and preparation of fortified smoothie

The research aimed to evaluate the effect of ultrasonication and succinylation on the functional, iron binding, physiochemical, and cellular mineral uptake efficacy of chickpea protein concentrate. Succinylation resulted in significant improvements in the water-holding capacity (WHC) (25.47 %), oil-holding capacity (OHC) (31.38 %), and solubility (5.80 %) of the chickpea protein-iron complex. Mineral bioavailability significantly increased by 4.41 %, and there was a significant increase in cellular mineral uptake (64.64 %), retention (36.68 %), and transport (27.96 %). The ferritin content of the succinylated chickpea protein-iron complex showed a substantial increase of 66.31%. Furthermore, the dual modification approach combining ultrasonication and succinylation reduced the particle size of the protein-iron complex with a substantial reduction of 83.25 %. It also resulted in a significant enhancement of 51.5 % in the SH (sulfhydryl) content and 48.92 % in the surface hydrophobicity. Mineral bioavailability and cellular mineral uptake, retention, and transport were further enhanced through dual modification. In terms of application, the addition of single and dual-modified chickpea protein-iron complex to a fruit-based smoothie demonstrated positive acceptance in sensory attributes. Overall, the combined approach of succinylation and ultrasonication to the chickpea protein-iron complex shows a promising strategy for enhancing the physiochemical and techno-functional characteristics, cellular mineral uptake, and the development of vegan food products.

Hydrothermal treatments of starch impact reaction patterns during subsequent chemical derivatization

Differences in derivatization patterns (using a fluorescent reagent, fluorescein isothiocyanate) of wheat, pea, and potato starches between native granular (NAT) starches and their respective annealed (ANN) and heat-moisture treated (HMT) starches were investigated to reveal structural changes associated with starch hydrothermal treatments. Size-exclusion chromatography with fluorescence and refractive index detection assessed the reactivity of amylose (AM), intermediate chains (IM1 and IM2), and amylopectin branch chains (AP1, AP2, and AP3) within the different starches. Shifts in X-ray diffraction patterns of HMT starches and in the gelatinization properties of both ANN and HMT starches confirmed molecular rearrangement. The reaction homogeneity (wheat and pea) and the overall extent of reaction (pea and potato) increased for HMT starches compared to other starches. The lower reactivities of IM2 chains (HMT starch) and AP3 chains (ANN starch) relative to NAT starches, indicated their involvement in molecular rearrangements and improved double helical order. IM2 and AP branch chains in ANN pea starch also were less reacted than NAT starch chains, suggesting their co-crystallization. Molecular rearrangements in ANN and HMT starches led to altered swelling and pasting viscosities. Thus, changes in the relative crystallinity of individual starch branch chains induced by hydrothermal processing impact the final physical properties.

Preparation, characterization and in vitro digestion of octenyl succinic anhydride-modified porous starch with different degrees of substitution

Octenyl succinic anhydride modified porous starch (OSA-PS) with degrees of substitution (DS) from 0.0123 to 0.0427 were prepared by aqueous phase method. From SEM, PS had a porous structure which showed a rough and corrosive surface after esterification with OSA. FT-IR revealed the characteristic peaks of OSA-PS at 1725 cm-1 and 1570 cm-1. From 1H NMR spectra, OSA-PS displayed extra chemical signal peaks at 0.85 ppm, 1.25 ppm and 1.96 ppm. These results fully demonstrated that OSA groups were successfully grafted onto PS. Furthermore, as DS increased, the specific surface area (5.6464 m2/g), pore volume (0.9959 × 10-2 cm3/g) and methylene blue adsorption capacity (24.3962 mg/g) of OSA-PS reached the maximum, while its relative crystallinity (26.8112 %) and maximum thermal decomposition temperature (291.96 °C) were the minimum. In vitro digestion studies showed that with the increase of DS, OSA-PS' contents of rapidly digestible starch and slowly digestible starch decreased from 9.06 % to 6.27 % and 28.38 % to 14.61 %, respectively. In contrast, its resistant starch had an increase in content from 62.56 % to 79.12%. The results provided an effective method for obtaining a double-modified starch with high specific surface area and anti-digestibility, thus broadening the industrial application of starch.

A review of starch swelling behavior: Its mechanism, determination methods, influencing factors, and influence on food quality

Swelling behavior involves the process of starch granules absorbing enough water to swell and increase the viscosity of starch suspension under hydrothermal conditions, making it one of the important aspects in starch research. The changes that starch granules undergo during the swelling process are important factors in predicting their functional properties in food processing. However, the factors that affect starch swelling and how swelling, in turn, affects the texture and digestion characteristics of starch-based foods have not been systematically summarized. Compared to its long chains, the short chains of amylose easily interact with amylopectin chains to inhibit starch swelling. Generally, reducing the swelling of starch could increase the strength of the gel while limiting the accessibility of digestive enzymes to starch chains, resulting in a reduction in starch digestibility. This article aims to conduct a comprehensive review of the mechanism of starch swelling, its influencing factors, and the relationship between swelling and the pasting, gelling, and digestion characteristics of starch. The role of starch swelling in the edible quality and nutritional characteristics of starch-based foods is also discussed, and future research directions for starch swelling are proposed.

Octenyl succinic anhydride modified starch with excellent emulsifying properties prepared by selective hydrolysis of supramolecular immobilized enzyme

Octenyl succinic anhydride modified starch is a common green and safe emulsifier. Although the conventional pretreatment method of free enzyme hydrolysis increases the hydroxyl content on the starch surface, thus improving the grafting degree of octenyl succinic anhydride and the amphiphilicity of the modified starch, the amylose and amylopectin structures are indiscriminately hydrolyzed, reducing the emulsion stability of modified starch. In this work, α-amylase organic-inorganic hybrid nanoflower biocatalyst is designed and synthesized for pretreatment of synthetic octenyl succinic anhydride modified starch. The α-amylase organic-inorganic hybrid nanoflower biocatalyst with a unique micro-nano spatial structure can selectively hydrolyze the amylopectin and protect the amylose of starch. The amylose ratio of starch pretreated by nanoflower biocatalyst is about twice that of starch pretreated by free enzyme, reaching 22.62 %. Meanwhile, the granular structure of starch is not damaged. The obtained octenyl succinic anhydride modified starch exhibits a high degree of substitution, up to 0.0213. The emulsion prepared with this modified starch maintains excellent emulsifying properties and stability. This study provides a novel strategy for the preparation of octenyl succinic anhydride modified starch with excellent emulsifying properties, which promote the application of octenyl succinic anhydride modified starch in food, pharmaceutical and cosmetic industries.

Resistant starch from sweet potatoes: Recent advancements and applications in the food sector

In tropical and subtropical areas, tuber and root crops are staple foods and a key source of energy. Sweet potato (SP) is currently regarded as one of the world's top ten foods because of its diverse sizes, shapes, color, and health benefits. The resistant starch (RS) content of SP is substantial. It is predicted to become the cheapest item in the food industry due to its extensive variety, food stability, emulsifier and fat substitution capabilities, and as filler. As a result, interest in SP-sourced RS has recently increased. Due to their unique nutritional and functional qualities, novelty has become a popular research focus in recent years. This review will summarize the current understanding of SP starch components and their impact on the technological and physicochemical properties of produced starch for commercial viability. The importance of sweet potato RS in addressing future RS demand sustainability is emphasized. SPs are a viable alternative to tubers as a sustainable raw material for RS production. It has an advantage over tubers because of its intrinsic nutritional value and climatic endurance. Thermal, chemical, and enzymatic treatments are effective RS manufacturing procedures. The adaptability of sweet potato RS allows for a wide range of food applications.

Thermal properties of different types of starch: A review

Starch is present in high amount in various cereals, fruits and roots & tubers which finds major application in industry. Commercially, starch is rarely consumed or processed in its native form, thus modification of starch is widely used method for increasing its application and process stability. Due to the high demand for starch in industrial applications, researchers were driven to hunt for new sources of starch, including modification of starch through green processing. Thermal properties are significant reference parameters for evaluating the quality of starch when it comes to cooking and processing. Modification of starches affects the thermal properties, which are widely studied using Differential scanning calorimeter or Thermogravimetric analysis. It could lead to a better understanding of starch's thermal properties including factors influencing and expand its commercial applications as a thickener, extender, fat replacer, etc. in more depth. Therefore, the review presents the classification of starches, factors influencing the thermal properties, measurement methods and thermal properties of starch in its native and modified form. Further, this review concludes that extensive research on the thermal properties of new sources of starch, as well as modified starch, is required to boost thermal stability and extend industrial applications.

Octenyl Succinic Anhydride-Modified Starch Attenuates Body Weight Gain and Changes Intestinal Environment of High-Fat Diet-Fed Mice

Effects of octenylsuccinate (OS) starch on body composition and intestinal environment in high-fat diet-fed mice were investigated. C57BL/6J mice were treated with a regular-fat (RF) diet, a high-fat (HF) diet, or a high-fat diet supplemented with OS starch (HFOSS). Fecal short-chain fatty acids (SCFAs) were quantified using gas chromatography, and the fecal microbiota profile was analyzed by 16S rDNA sequencing. One-way ANOVA and metastats analysis were performed for statistical analysis. After 22 weeks of feeding, mice in the HFOSS group had significantly lower body weight, body fat, liver weight, and cumulative food intake than those in the HF group but higher than that of the RF group. Fecal total SCFA, acetic, propionic, and butyric acid concentrations were significantly higher in the HFOSS group than that in the HF and RF groups. OS starch intervention increased the relative abundance of Parabacteroides, Alistipes, and Ruminiclostridium_5 and decreased that of Tyzzerella, Oscillibacter, Desulfovibrio, and Anaerotruncus compared with the RF and HF groups. The relative abundance of Lachnospiraceae_UCG-006 in the HFOSS group was lower than that in the HF group but higher than that in the RF group. In conclusion, OS starch prevents fat accumulation in high-fat diet-fed mice and might provide potential health benefits due to its fermentability in the gut and its ability to regulate gut microbial community structure.

Effect of Fermentation Time on Molecular Structure and Physicochemical Properties of Corn Ballast Starch

The effect of fermentation treatment on the surface morphology, crystal structure, molecular weight, chain length distribution, and physicochemical properties of corn starch was investigated using natural fermentation of corn ballast. The amylose content in corn ballast starch reduced at first after natural fermentation, then grew, following the same trend as solubility. There were certain erosion marks on the surfaces of fermented corn ballast starch granules. The crystalline structure of corn ballast starch remained the same, i.e., a typical A-type crystalline structure, at different fermentation times; however, the intensities of diffraction peaks were different. The weight-average molecular weight of starch first increased and then decreased after fermentation. The content of low-molecular-weight starch (peak 3) decreased from 25.59 to 24.7% and then increased to 25.76%, while the content of high-molecular-weight starch (peak 1) increased from 51.45 to 53.26%, and then decreased to 52.52%. The fermentation time showed a negative correlation with the viscosity of starch, and the pasting temperature first increased, and then decreased. Natural fermentation can be used as a technical means to produce corn starch products as a result of the experiments' findings, and future experiments will detect and analyze the bacterial structure of corn fermentation broth in order to better understand the molecular mechanism of natural fermentation affecting the structure and physicochemical properties of corn starch.

Sweet Potato (Ipomoea batatas L.) Phenotypes: From Agroindustry to Health Effects

Sweet potato (SP; Ipomoea batatas (L.) Lam) is an edible tuber native to America and the sixth most important food crop worldwide. China leads its production in a global market of USD 45 trillion. SP domesticated varieties differ in specific phenotypic/genotypic traits, yet all of them are rich in sugars, slow digestible/resistant starch, vitamins, minerals, bioactive proteins and lipids, carotenoids, polyphenols, ascorbic acid, alkaloids, coumarins, and saponins, in a genotype-dependent manner. Individually or synergistically, SP’s phytochemicals help to prevent many illnesses, including certain types of cancers and cardiovascular disorders. These and other topics, including the production and market diversification of raw SP and its products, and SP’s starch as a functional ingredient, are briefly discussed in this review.

Dual Modification of Sago Starch via Heat Moisture Treatment and Octenyl Succinylation to Improve Starch Hydrophobicity

To elucidate the pretreatment of a heat moisture treatment that could increase the DS and hydrophobicity of OSA starch, the effect of the moisture level of the HMT process on the physicochemical properties was investigated. The higher moisture content (MC) in the HMT process led to a decreasing degree of crystallinity and gelatinization enthalpy and also produced surface damage and cracking of the granules. HMT pretreatment with the right moisture content resulted in OSA starch with the maximum DS value and reaction efficiency. Pre-treatment HMT at 25% MC (HMT-25) followed by OSA esterification exhibited the highest DS value (0.0086) and reaction efficiency (35.86%). H25-OSA starch has been shown to have good water resistance (OAC 1.03%, WVP 4.92 × 10-5 g/s m Pa, water contact angle 88.43°), and conversely, has a high cold water solubility (8.44%). Based on FTIR, there were two new peaks at 1729 and 1568 cm-1 of the HMT-OSA starch, which proved that the hydroxyl group of the HMT starch molecule had been substituted with the carbonyl and carboxyl ester groups of OSA.

Structure and Menthone Encapsulation of Corn Starch Modified by Octenyl Succinic Anhydride and Enzymatic Treatment

In order to improve the ability of starch to absorb menthone, corn starch was modified by enzymatic treatment (amyloglucosidase and α-amylase) combined with octenyl succinic anhydride (OSA) esterification. The oil absorption rate of starch modified by enzymatic treatment followed by OSA (P-OSA) reached 101.33%, whereas that of samples with reverse action sequences (OSA-P) was only 59.67%. The degree of substitution of OSA-P was also generally lower than that of P-OSA. At high OSA addition, OSA-P had a smaller specific surface area with fewer pores because octenyl succinic (OS) groups impeded the enzymatic treatment. Compared with OSA-P, the lamellar structure of P-OSA is sparser and less ordered. Owing to its pores, P-OSA was beneficial for the reaction to occur inside the granules, which was observed by Raman spectroscopy and laser confocal microscopy. At high OSA addition, the loading of P-OSA to menthone could reach 64.34 mg/g.

An Insight into the Gelatinization Properties Influencing the Modified Starches Used in Food Industry: A review

Native starch is subjected to various forms of modification to improve its structural, mechanical, and thermal properties for wider applications in the food industry. Physical, chemical, and dual modifications have a substantial effect on the gelatinization properties of starch. Consequently, this review explores and compares the different methods of starch modification applicable in the food industry and their effect on the gelatinization properties such as onset temperature (To), peak gelatinization temperature (Tp), end set temperature (Tc), and gelatinization enthalpy (ΔH), studied using differential scanning calorimetry (DSC). Chemical modifications including acetylation and acid hydrolysis decrease the gelatinization temperature of starch whereas cross-linking and oxidation result in increased gelatinization temperatures. Common physical modifications such as heat moisture treatment and annealing also increase the gelatinization temperature. The gelatinization properties of modified starch can be applied for the improvement of food products such as ready-to-eat, easily heated or frozen food, or food products with longer shelf life.

Preparation and structural properties of starch phosphate modified by alkaline phosphatase

In this study, a method for the synthesis of starch phosphate using the transferase properties of alkaline phosphatase was explored. Maize starch was treated with a pyrophosphate solution containing alkaline phosphatase and catalytic ions under pH 8 at 37 °C. The synthesis of starch phosphate was evaluated and compared with untreated and treated starch controls. The phosphorus content of the samples increased up to 8500% with the catalytic ion concentration, whereas the peak viscosity by up to 41.4% decreased. The crystallinity and enthalpy of the phosphorylated samples were reduced by up to 26.8% and 23.3%, respectively; however, no significant was observed by Fourier-transform infrared spectrometer. The roughness of the starch surface and the distribution of elemental phosphorus were observed by scanning electron microscopy and energy dispersive Spectrometry. X-ray photoelectron spectroscopy and time of flight secondary ion mass spectrometry results further indicated the grafting of the phosphate radical.

Evaluation of structural and physicochemical properties of octenyl succinic anhydride modified sweet potato starch with different degrees of substitution

Octenyl succinic anhydride modified sweet potato starch (OSA-SPS) were synthesized in different degrees of substitution (DS) from 0.0073 to 0.0153. Unlike sweet potato starch (SPS), two additional characteristic peaks were detected at 1,572 and 1,724 cm^-1 from the Fourier Transform-Infrared spectroscopy in OSA-SPS and their intensities were generally increased with the elevation in DS. Scanning electron microscopy and X-ray diffraction analyses revealed that the esterification did not alter the initial shape of starch granules and mainly occurred on the surface of starch pellets. In addition, OSA-SPS possessed higher transmittance, viscosity and stability, lower gelatinization temperature, and shorter gelatinization time than SPS. The changes of these properties of SPS after the esterification with OSA would be more conducive to its application in food and other fields. PRACTICAL APPLICATION: Octenyl succinic anhydride modified starch (OSAS), as a relatively novel amphiphilic surfactant, have been applied to the processing of many products due to its special hydrophilicity and lipophilicity. The structural and physicochemical properties of sweet potato starch (SPS) and octenyl succinic anhydride modified sweet potato starch (OSA-SPS) with different degrees of substitution (DS) were systematically analyzed in this research. The findings give fundamental understanding of OSA-SPS and provide a basic reference for its application in industries including food, cosmetics, textiles, and so on.

Effect of Heat-Moisture Treatment on Physicochemical, Thermal, Morphological, and Structural Properties of Mechanically Activated Large A- and Small B-Wheat Starch Granules

The large and small granules of A-starch (AS) and B-starch (BS) were separated from wheat cultivar of ZM 22. It was modified by ball-milling (BM) and heat-moisture treatment (HMT) was performed after BM treatment. After BM, noticeable deformation, fragments, fissures, and grooves were observed, whereas diffusion and aggregation were detected and followed by HMT. Crystallinity of AS-BM-5h decreased to 7.8%, and no diffraction peaks were observed for BS. However, after HMT, the crystallinity of AS-BM-5h and BS-BM-5h was increased to 17.4% and 6.2%, respectively. AS-BM-HMT displayed better thermal stability. After being treated by BM previously, AS and BS showed an increase in solubility, whereas the subsequent HMT of BM-treated starches (both AS and BS) had higher solubility especially for BS with longer BM treatment time. Large-sized granules were easier to be damaged by BM, whereas small-sized granules were greatly influenced by HMT. Dual modification of BM-HMT was an effective and potential method to modify the structure of wheat starch granules and expand its industrial applications. PRACTICAL APPLICATION: This study put forward a new dual modification method in combination with BM-HMT for large A-starch and small B-starch granules. Flour processing inevitably causes some starch to be damaged by destroying the structure. How can the damaged starch structure be improved to satisfy the food processing industry? HMT was proposed to modify the mechanically activated starches because of its obvious effects on smaller BS. HMT can reduce the content of damaged starch by rearranging and reorganizing its structures. This study can provide a low-cost, convenient, and eco-friendly technology for improving damaged starch and developing its applications in food industry.