Applicability of biological dye tracer in strip biosensor for ultrasensitive detection of pathogenic bacteria

Advances in enhancement-type signal tracers and analysis strategies driven Lateral flow immunoassay for guaranteeing the agri-food safety

As a classical and continuously developing on-site sensor, Lateral flow immunoassay (LFIA) exhibits promising potential for advanced point-of-care testing (POCT). Especially given the significance of agri-food in human dietary structure and the ever-increasing agri-food safety concerns, improved analysis performance of LFIA is urgently required. Recently, flourishing enhancement-type signal tracers (STs) and brilliant enhancement-type analysis strategies have been actively pursued in the development of LFIA because these patterns endow immense feasibility in manufacturing target-oriented sensing platforms. To facilitate further advancements in this field, this review comprehensively examines the recent developments in enhancement-type STs (e.g., load-, green-, recognizable-, Janus-, and dyestuffs-type STs) and enhancement-type analysis strategies (e.g. immuno-network, in-situ growth, nanozymes, multi-signal readout, and software-assisted quantitative analytical strategies) that significantly improve precise analysis efficiency. Moreover, by conducting a comprehensive evaluation of the major advancements and aiming to identify future trends in LFIA-based sensor, the objective of this review is to provide recommendations for future research based on the challenges and opportunities of LFIA.

Novel Dumbbell-like CeVO4 Carrier-Based Immunochromatographic Assay for Highly Sensitive T-2 Toxin Detection in Food Samples

Improving the sensitivity of immunochromatographic assays (ICAs) lies in the signal strength and probe activity of the labeled tracers, and the color properties and structure of the labeled tracers are key factors affecting the biological activity. In this study, cerium vanadate (CeVO4) of different sizes and shapes (230, 1058, and 710 nm) was synthesized to investigate its impact on the performance of ICA for T-2 detection. The prepared CeVO4 possessed outstanding stability, a large specific surface area, superior biocompatibility, and high compatibility with T-2 mAb (affinity constant was 3.14 × 108 M-1). As labeling probes for competitive ICA, the results showed that 1058 nm of CeVO4 as labels exhibited the best detection performance, with a limit of detection (LOD) of 0.079 ng/mL, which was substantially 19-fold less than the average of gold nanoparticle ICA. Additionally, CeVO4-ICA was effectively used to detect T-2 toxin, and the recovery rate for spiking corn and oatmeal samples was determined to be 81.27-115.44% (relative standard deviation <9.16%). The above information demonstrates the efficiency and applicability of CeVO4-ICA as a technique for quick and thorough identification of T-2 toxin residues in food.

"Lock-and-key" recognizer-encoded lateral flow assays toward foodborne pathogen detection: An overview of their fundamentals and recent advances

In light of severe health risks of foodborne pathogenic bacterial diseases, the potential utility of point-of-care (POC) sensors is recognized for pathogens detection. In this regard, lateral flow assay (LFA) is a promising and user-friendly option for such application among various technological approaches. This article presents a comprehensive review of "lock-and-key" recognizer-encoded LFAs with respect to their working principles and detection performance against foodborne pathogenic bacteria. For this purpose, we describe various strategies for bacteria recognition including the antibody-based antigen-antibody interactions, nucleic acid aptamer-based recognition, and phage-mediated targeting of bacterial cells. In addition, we also outline the technological challenges along with the prospects for the future development of LFA in food analysis. The LFA devices built based upon many recognition strategies are found to have great potential for rapid, convenient, and effective POC detection of pathogens in complex food matrixes. Future developments in this field should emphasize the development of high-quality bio-probes, multiplex sensors, and intelligent portable readers.

AIEgens: Next Generation Signaling Source for Immunoassays?

Luminogens with aggregation-induced emission (AIEgens) properties have numerous broad applications in fields of chemical and biological analyses due to their exceptional photostability, excellent signal reliability, high quantum yield, and large Stokes' shift. In particular, AIEgens also bring new blood for immunoassay. Since publication of the first 2004 paper, AIEgens-based immunoassays have received significant attention because of their high sensitivity, specificity, accuracy, and reliability. However, until now, there have been no comprehensive literature reviews focused on the evolving field of AIEgens-based immunoassays. Thus, we have extensively reviewed AIEgens-based immunoassays from their basic working principles to specific applications. We focus on several fundamental elements of AIEgens-based immunoassays, including the typical structures of AIEgens, emission mechanism of AIEgens probes, function of AIEgens in immunoassays, and platform of AIEgens-based immunoassays. Then, the representative applications of AIEgens-based immunoassays in food safety, medical diagnostics, and environmental monitoring are explored. Thus, proposals on how to further improve the AIEgens-based immunoassay performance are also discussed, as well as future challenges and perspectives, aiming to provide brief and valid guidelines for choosing suitable AIEgens-based immunoassays according to specific application requirements.

Multiplex immunochromatographic platform based on crystal violet tag for simultaneous detection of streptomycin and chloramphenicol

Antibiotic abuse has caused serious health risks for human beings for long. To address the problem, novel and facile detection techniques are highly desired. Here, an effective multiplex immunochromatographic platform (MICP) with synthesis-free and cost-effective merits is established for simultaneous detection of antibiotics on a single immunochromatographic assay (ICA) strip. Adopting crystal violet (CV) as a signal tag for multiplex ICA allows for direct coupling with multiple antibodies in several minutes. By combining CV and ICA perfectly, this convenient strategy offers improvements in convenience, speed, flexibility, and portability, eventually ensuring the optimized effectiveness of this approach. As a result, the established platform is successfully used to detect streptomycin (STR) and chloramphenicol (CAP) with visual detection mode, and the obtained total recoveries of milk and honey real samples changed from 83.82 to 113.38% with total RSD values of 0.48 to 4.15%.

Graphene-labeled synthetic antigen as a novel probe for enhancing sensitivity and simplicity in lateral flow immunoassay

Lateral flow immunoassay (LFIA), which combines immune-specific recognition properties with sensitive nano-signaling features, has emerged as an excellent tool for point-of-care testing (POCT) in food safety and clinical diagnosis. Exploring novel probes with a simple preparation process, improved signal intensity and good stability is conducive to the development and application of LFIA. Herein, a potent non-antibody probe, graphene-labeled synthetic antigen (G-Ag), was created for LFIA, in which graphene endowed a naked-eye visual colorimetric signal with high sensitivity, and the synthetic antigen competed with the target for binding to the antibody on the test line. During the G-Ag probe manufacturing process, only one simple mixing step was needed because graphene nanosheets presented a strong adsorption capacity toward the protein (BSA) on the synthetic antigen, significantly saving time, labor and cost. Especially, the synthetic antigen forms a fabulous probe element without the need for antibody, and thus the proposed LFIA avoids the destruction of antibody activity, and exhibits excellent sensitivity and stability. After optimization, LFIA was successfully applied to analyze clenbuterol; the lowest visually detectable concentration was 0.1 ng mL^-1, and the probe could be well-applied in pork, mutton, sausage and bacon samples, demonstrating favorable specificity and repeatability. Owing to the advantages of simplicity, non-antibody probe, sensitivity and reliability, G-Ag probe-based LFIA has application potential for small-molecule target monitoring and rapid detection.

Bacterial coloration immunofluorescence strip for ultrasensitive rapid detection of bacterial antibodies and targeted antibody-secreting hybridomas

The indirect enzyme-linked immunosorbent assay (ELISA) is the gold standard method for monoclonal antibody (McAb) detection and plays a unique role in the preparation of bacterial antibodies. To solve the laborious issues associated with indirect ELISA, a novel bacterial coloration immunofluorescence strip (BCIFS) for antibody detection using colored bacteria instead of a labeled antibody as the antigen and tracer simultaneously and goat anti-mouse IgG as the test line was developed. The affinity range survey of BCIFS indicated that hybridoma cell cultures of E. coli O157:H7 (D3, E7) and Vibrio parahemolyticus (H7, C9) were detected, which complied with the results of indirect ELISA. Compared with the traditional indirect ELISA, the BCIFS sensitivity for E7 cell cultures, ascites, and purified antibodies was at least 4-fold more sensitive, and the BCIFS cross-reactivity for E7 cell cultures was almost consistent with that of indirect ELISA. In addition, the BCIFS isotypes for E. coli O157:H7 cell cultures and Vibrio parahemolyticus were IgG2a and IgG1, respectively, which were identical to the indirect ELISA. Furthermore, the BCIFS method was confirmed by McAb preparation, effective antibody use, and targeted antibody-secreted hybridoma preparation and screening, which showed excellent performance and substitution of the indirect ELISA method. Combined with methylcellulose semisolid medium, BCIFS offers a novel, easy to operate, rapid preparation method for antigen-specific hybridomas. This is the first report using BCIFS instead of indirect ELISA for bacterial antibody detection and application in different samples, which demonstrates a rapid and powerful tool for antibody engineering.

A nanomaterial-free and thionine labeling-based lateral flow immunoassay for rapid and visual detection of the transgenic CP4-EPSPS protein

Nanomaterial-based lateral flow immunoassays (LFIAs) have been widely used for the on-site detection of genetically modified components. However, the practical applications are often limited by the complex matrix, such as in red samples. In this study, a thionine (Thi) labeling-based LFIA was developed for the first time to detect CP4-EPSPS protein. The optimal labeling concentration of Thi was 0.5 mg/mL, and the antibody could be rapidly coupled to Thi in 10 min. The visual limit of detection (vLOD) levels for transgenic soybean, sugar beet, and cotton containing the CP4-EPSPS protein reached 0.05%, 0.1%, and 0.1%, respectively, and had no interference from other proteins. After storage at 4 °C for three months, the LFIA sensitivity remained unchanged and showed good stability. This method could be used to screen and detect a variety of transgenic crops containing the CP4-EPSPS protein, and the results were consistent with the current standard assay. This study pioneered the development of an immunochromatographic method using Thi as a marker and applied it to the detection of the CP4-EPSPS protein in herbicide-tolerant transgenic crops. This provides a new method for the rapid immunoassay of Thi as a dye and has good prospects for practical application.

Biosensor Technologies in Medicine: from Detection of Biochemical Markers to Research into Molecular Targets (Review)

Infections are a major cause of premature death. Fast and accurate laboratory diagnostics of infectious diseases is a key condition for the timely initiation and success of treatment. Potentially, it can reduce morbidity, as well as prevent the outbreak and spread of dangerous epidemics. The traditional methods of laboratory diagnostics of infectious diseases are quite time- and labour-consuming, require expensive equipment and trained personnel, which is crucial within limited resources. The fast biosensor-based methods that combine the diagnostic capabilities of biomedicine with modern technological advances in microelectronics, optoelectronics, and nanotechnology make an alternative.

The modern achievements in the development of label-free biosensors make them promising diagnostic tools that combine rapid detection of specific molecular markers, simplicity, ease-of-use, efficiency, accuracy, and cost-effectiveness with the tendency to the development of portable platforms. These qualities exceed the generally accepted standards of microbiological and immunological diagnostics and open up broad prospects for using these analytical systems in clinical practice directly at the site of medical care provision (point-of-care, POC concept).

A wide variety of modern biosensor designs are based on the use of diverse formats of analytical and technological strategies, identification of various regulatory and functional molecular markers associated with infectious pathogens. The solution to the existing problems in biosensing will open up great prospects for these rapidly developing diagnostic biotechnologies.

On-site detection of food and waterborne bacteria - current technologies, challenges, and future directions

With the rise in outbreaks of pathogenic bacteria in both food and water resulting in an increased instance of infection, there is a growing public health problem in both developed and developing countries. In this increasing threat the most effective method for control and prevention is rapid and cost-effective detection. Research has shifted in recent years towards the development of rapid and on-site assays for the detection of these kinds of bacteria. However, there are still some limitations in the implementation of these assays in the field. This article discusses the current on-site detection methods. Current scope of advancements and limitations in the development or use of these on-site technologies for food and waterborne bacterial detection is evaluated in this study. With the continued development of these technologies, on-site detection will continue to impact many areas of public health. As these methods continue to improve and diversify further, on-site detection could become more widely implemented in food and water analysis.

Lateral flow device for water fecal pollution assessment: from troubleshooting of its microfluidics using bioluminescence to colorimetric monitoring of generic Escherichia coli

Water is the most important ingredient of life. Water fecal pollution threatens water quality worldwide and has direct detrimental effects on human health and the global economy. Nowadays, assessment of water fecal pollution relies on time-consuming techniques that often require well-trained personnel and highly-equipped laboratories. Therefore, faster, cheaper, and easily-used systems are needed to in situ monitor water fecal pollution. Herein, we have developed colorimetric lateral flow strips (LFS) able to detect and quantify Escherichia coli species in tap, river, and sewage water samples as an indicator of fecal pollution. The combination of LFS with a simple water filtration unit and a commercially available colorimetric reader enhanced the assay sensitivity and enabled more accurate quantification of bacteria concentration down to 104 CFU mL-1 in 10 minutes, yielding recovery percentages between 80% and 90% for all water samples analyzed. Overall, this system allows for monitoring and assessing water quality based on E. coli species as a standard microbiological indicator of fecal pollution. Furthermore, we have developed a novel bioluminescent, bacteria-based method to quickly characterize the performance of a great variety of LFS materials. This new method allows evaluating the flow rate of big analytes such as bacteria through the LFS materials, as a suggestive means for selecting the appropriate materials for fabricating LFS targeting big analytes (≈2 μm). As a whole, the proposed approach can accelerate and reduce the costs of water quality monitoring and pave the way for further improvement of fecal pollution detection systems.

A Pt-Ir nanocube amplified lateral flow immunoassay for dehydroepiandrosterone

The traditional gold-nanoparticle-based lateral flow immunoassay (LFIA) cannot satisfy the requirements for the sensitive detection of dehydroepiandrosterone (DHEA) in human urine. To enhance the sensitivity of the LFIA, platinum-iridium nanocubes (Pt-Ir NCs) with high catalytic efficiency and stability were synthesized and labelled with polyclonal antibody (pAb) to form a pAb-Pt-Ir probe. For the detection of DHEA, a novel LFIA with Pt-Ir NCs as an optical label and an enhanced LFIA in which the peroxidase-like activity of the Pt-Ir NCs was triggered by the introduction of the chromogenic substrate 3-amino-9-ethyl-carbazole (AEC) were developed and compared with a LFIA with platinum nanocubes (PtNCs) as an optical label. The visual limit of detection was 0.5 ng mL-1 for Pt-Ir-LFIA and 0.05 ng mL-1 for AEC-enhanced Pt-Ir-LFIA, in comparison to 100 ng mL-1 for PtNCs-LFIA and 50 ng mL-1 for AEC-enhanced PtNCs-LFIA. The average recoveries from spiked urine samples ranged from 90.8% to 110.4%, with a coefficient of variation below 12.6%, suggesting the accuracy and reliability of our developed immunoassay. Achieving excellent sensitivity, specificity, and reproducibility, Pt-Ir-LFIA provided a promising platform for monitoring DHEA.

Recent Advances in Nano-Bio-Sensing Fabrication Technology for the Detection of Oral Cancer

Nanotechnology-based miniaturized devices have been a breakthrough in the pre-clinical and clinical research areas, e.g. drug delivery, personalized medicine. They have revolutionized the discovery and development of biomarker-based diagnostic devices for detection of various diseases such as tuberculosis, malaria and cancer. Nanomaterials (NMs) hold tremendous diagnostic potential due to their high surface-to-volume ratio and quantum confinement phenomenon, improving the detection limit of clinically relevant biomolecules in bio-fluids. Thus, they are helpful in the translation of bench-on platform to point-of-care (POC) screening device. The nanomaterial-based biosensor fabrication technology has also simplified and improved oral cancer (OC) or oral squamous cell carcinomas (OSCC) diagnosis. The fabrication of nano-bio sensors involves application specific modifications of NMs. The unique properties functionalized NMs have augmented their application on the nano-biosensing platform for the detection of clinically relevant biomolecules in bio-fluids. Therefore, this article summarizes the recent advancements in the process of fabrication of nano-biosensors for detection of OC.

Graphite-like carbon nitride-laden gold nanoparticles as signal amplification label for highly sensitive lateral flow immunoassay of 17β-estradiol

Conventional gold nanoparticles-based lateral flow immunoassays (AuNPs-LFIA) lack sensitivity. In this work, we developed a graphite-like carbon nitride-laden AuNPs (g-C₃N₄@Au) assisted LFIA to improve sensitivity for 17β-estradiol (E2) in foods. g-C₃N₄ nanosheets were applied as carriers, because of their excellent chemical stability, large surface areas and low-cost, loading large numbers of AuNPs to amplify signals and improve the overall response of g-C₃N₄@Au-based LFIA (g-C₃N₄@Au-LFIA). The lowest visual limit of detection (vLOD) of E2 is 0.5 ng mL^-1 for g-C₃N₄@Au-LFIA, which exhibit a significantly three-fold improved analytical performance compared with that of AuNPs-LFIA. Additionally, this method was successfully used to the detection of E2 in four spiked food samples, offering a great potential of the g-C₃N₄@Au based LFIA for its application in food products.

Ultrasensitive label-free immunochromatographic strip sensor for Salmonella determination based on salt-induced aggregated gold nanoparticles

Here we present an innovative label-free immunochromatographic strip (ICTS) sensor, in which salt-induced aggregated gold nanoparticles (SIA-AuNPs) act as the signal probe, allowing in 14 min the identification and sensitive quantification of Salmonella as model targets. It has been evidenced that SIA-AuNPs could be absorbed on the surface of bacteria based on van der Waals forces. The SIA-AuNPs@Salmonella complex was captured by anti-Salmonella polyclonal antibody deposited on the test zone. With the label-free ICTS sensor, we successfully detected Salmonella in a concentration range of 10³-10⁸ CFU/mL and a visual detection limit of 1 × 10³ CFU/mL. The band of test zone could be distinguished at a concentration of 10³ CFU/mL by naked eye, which is 100-fold lower than the cationic AuNPs based method. The strip sensor was further validated with real samples including cabbage and drinking water with excellent precision and showed to provide excellent recovery.

Label-Free Biosensors for Laboratory-Based Diagnostics of Infections: Current Achievements and New Trends

Infections pose a serious global public health problem and are a major cause of premature mortality worldwide. One of the most challenging objectives faced by modern medicine is timely and accurate laboratory-based diagnostics of infectious diseases. Being a key factor of timely initiation and success of treatment, it may potentially provide reduction in incidence of a disease, as well as prevent outbreak and spread of dangerous epidemics. The traditional methods of laboratory-based diagnostics of infectious diseases are quite time- and labor-consuming, require expensive equipment and qualified personnel, which restricts their use in case of limited resources. Over the past six decades, diagnostic technologies based on lateral flow immunoassay (LFIA) have been and remain true alternatives to modern laboratory analyzers and have been successfully used to quickly detect molecular ligands in biosubstrates to diagnose many infectious diseases and septic conditions. These devices are considered as simplified formats of modern biosensors. Recent advances in the development of label-free biosensor technologies have made them promising diagnostic tools that combine rapid pathogen indication, simplicity, user-friendliness, operational efficiency, accuracy, and cost effectiveness, with a trend towards creation of portable platforms. These qualities exceed the generally accepted standards of microbiological and immunological diagnostics and open up a broad range of applications of these analytical systems in clinical practice immediately at the site of medical care (point-of-care concept, POC). A great variety of modern nanoarchitectonics of biosensors are based on the use of a broad range of analytical and constructive strategies and identification of various regulatory and functional molecular markers associated with infectious bacterial pathogens. Resolution of the existing biosensing issues will provide rapid development of diagnostic biotechnologies.

Optical Biosensor for Rapid Detection of Salmonella typhimurium Based on Porous Gold@Platinum Nanocatalysts and a 3D Fluidic Chip

Screening of pathogenic bacteria is a key to avoid food poisoning. The major drawbacks of existing assays for foodborne bacteria detection include long time for culture, complex DNA extraction for the polymerase chain reaction (PCR), and low sensitivity for enzyme-linked immunosorbent assay (ELISA), greatly limiting their practical applications. Here, we developed a sensitive optical biosensor based on porous gold@platinum nanocatalysts (Au@PtNCs) and a passive three-dimensional (3D) micromixer for fast detection of Salmonella typhimurium. The target Salmonella cells were first separated using immunomagnetic nanoparticles and the passive 3D micromixer. Then, immune Au@PtNCs were labeled onto the target cells as signal output to catalyze hydrogen peroxide-3,3',5,5'-tetramethylbenzidine. Finally, the absorbance was measured at 652 nm to calculate the bacterial amount. This optical biosensor could detect Salmonella at concentrations from 1.8 × 10¹ to 1.8 × 10⁷ CFU/mL in 1 h. Its detection limit was calculated to be 17 CFU/mL. Besides, this passive 3D micromixer could magnetically separate 99% of target bacteria from the sample in 10 min. This biosensor has the potential to be extended to detect other bacteria by changing the antibodies.

Diversely positive-charged gold nanoparticles based biosensor: A label-free and sensitive tool for foodborne pathogen detection

•

A label-free, non-paired antibodies dependent biosensor was constructed.

•

(+) AuNPs were employed to generate signal and capture bacteria in the new LFS.

•

This work possesses a desirable universality for other pathogens.

Gold nanoparticles (AuNPs)-based lateral flow strip (LFS) enables a quick screening of foodborne bacteria in point-of-care (POC) diagnostics but suffers from the cumbersome labeling of antibodies and poor sensitive performance. Here, we innovated a label-free immunoassay to detect pathogenic bacteria by introducing diversely positive charges functionalized AuNPs ((+) AuNPs). The (+) AuNPs can be loaded on negatively charged bacteria via electrostatic interaction, leading to a color labeling to target bacteria. Afterward, the (+) AuNPs-bacteria complex can be specifically captured by monoclonal antibody (McAb) immobilized on test (T)-line. Under optimum conditions, the proposed LFS exhibited a lowest detectable concentration of 10³ CFU/mL for Salmonella enteritidis (S. enteritidis) and could be well applied in drinking water, lettuce and pork samples. Moreover, this novel (+) AuNPs-LFS possessed a universal applicability, which could also be used for detecting Escherichia coli O157 (E. coli O157) with a superior sensitivity (10⁴ CFU/mL) and specificity.

Development of Nanozymes for Food Quality and Safety Detection: Principles and Recent Applications

The public concerns about agrifood safety call for innovative and reformative analytical techniques to meet the inspection requirements of high sensitivity, specificity, and reproducibility. Enzyme-mimetic nanomaterials or nanozymes, which combine enzyme-like properties with nanoscale features, emerge as an excellent tool for quality and safety detection in the agrifood sector, due to not only their robust capacity in detection but also their attraction in future-oriented exploitations. However, in-depth understanding about the fundamental principles of nanozymes for food quality and safety detection remains limited, which makes their applications largely empirical. This review provides a comprehensive overview of the principles, designs, and applications of nanozyme-based detection technique in the agrifood industry. The discussion mainly involves three mimicking types, that is, peroxidase, oxidase, and catalase-like nanozymes, capable of detecting major agrifood analytes. The current principles and strategies are classified and then discussed in details through discriminating the roles of nanozymes in diverse detection platforms. Thereafter, recent applications of nanozymes in detecting various endogenous ingredients and exogenous contaminants in foods are reviewed, and the outlook of profound developments are explained. Evidenced by the increasing publications, nanozyme-based detection techniques are narrowing the gap to practical-oriented food analytical methods, while some challenges in optimization of nanozymes, diversification of recognition-to-signal manners, and sustainability of methodology need to conquer in the future.

Dual recognition strategy and magnetic enrichment based lateral flow assay toward Salmonella enteritidis detection

As a rapid and facile means for foodborne bacteria detection in situ, lateral flow immunoassay (LFA) still has intrinsic limitations in the construction of the existing sandwich LFA format, e.g. screening difficulties of paired antibodies (Abs), poor stability of Ab probe, etc. Here, combined the strong affinity of antibiotic with the superior specificity of antibody molecules, a novel and robust LFA based on a dual recognition strategy and magnetic separation was designed to achieve specific and sensitive determination of Salmonella enteritidis (S. enteritidis). In this work, ampicillin (Amp), a broad-spectrum antibiotic against bacteria, was employed as an ideal Ab replacer to anchor cells of target bacteria. By coating Amp on magnetite nanoparticles (MNPs), the Amp-MNPs showed remarkable binding, separation and enrichment capacities toward bacteria even under complex sample matrices. To ensure the selectivity of this protocol, anti-S. enteritidis monoclonal antibody was then adopted as the second anchoring agent to form a sandwich complex with Amp-MNPs. Based on these facts, S. enteritidis, as low as 10²-10³ CFU/mL, could be detected by naked eyes in food samples. Therefore, this creative antibiotic-bacteria-antibody LFA sandwich pattern shows great application potential in the monitoring of food contamination and infectious diseases caused by pathogenic bacteria. Compared to the common paired Abs based sandwich method, the proposed approach was cost-effective, non-labor intensive, stable, sensitive and efficient.

Preparation of Fluorescent Molecularly Imprinted Polymers via Pickering Emulsion Interfaces and the Application for Visual Sensing Analysis of Listeria Monocytogenes

In this work, a novel molecularly imprinted polymer (MIP) with water-soluble CdTe quantum dots (QDs) was synthesized by oil-in-water Pickering emulsion polymerization using whole Listeria monocytogenes as the template. Listeria monocytogenes was first treated by acryloyl-functionalized chitosan with QDs to form a bacteria-chitosan network as the water phase. This was then stabilized in an oil-in-water emulsion comprising a cross-linker, monomer, and initiator, causing recognition sites on the surface of microspheres embedded with CdTe QDs. The resulting MIP microspheres enabled selective capture of the target bacteria via recognition cavities. The target bacteria Listeria monocytogenes was detected. Scanning electron microscopy (SEM) characterization showed that the MIPs had a rough spherical shape. There was visual fluorescence detection via quenching in the presence of the target molecule, which offered qualitative detection of Listeria monocytogenes in milk and pork samples. The developed method simplified the analysis process and did not require any sample pretreatment. In addition, the fluorescence sensor provided an effective, fast, and convenient method for Listeria monocytogenes detection in food samples.