Understanding the multi-scale structural changes in starch and its physicochemical properties during the processing of chickpea, navy bean, and yellow field pea seeds

Microwave-assisted extraction enhances Aquafaba functionality: A high value-added egg white replacer in vegan meringue production

This study aimed to compare microwave-assisted extraction (MAE) with conventional extraction methods regarding the physicochemical, techno-functional, molecular, and thermal properties of chickpea aquafaba. The potential of microwave-extracted aquafaba (MAEA) as an egg white replacer in vegan meringue production was also evaluated. The results indicated that while MAE reduced extraction yield and foam stability, it enhanced protein content, density, dry matter, and foaming ability compared to conventionally extracted aquafaba (CEA). X-ray diffraction revealed a reduction in protein crystal size, and FT-IR analysis confirmed the absence of harmful compounds in MAEA. Thermogravimetric analysis (TGA) identified key thermal degradation points. Substituting egg whites with aquafaba affected batter properties and meringue characteristics, but sensory evaluation showed no significant differences. Meringue with 50 % aquafaba substitution had the highest quality score, suggesting that this replacement offers economic and environmental benefits while meeting consumer preferences.

Stabilization mechanism of white kidney bean based milk through novel perspectives of endogenous starch

Plant-based milk (PBM) substitutes have attracted worldwide attention, but the development is restricted by poor stability and limited categories. White kidney bean (WKB) is one potential healthy material for PBM production. Here, we aimed to obtain optimal WKB cultivars first, and further investigated stabilization mechanism in aspect of its endogenous starch. Among the investigated cultivars, three cultivars were selected as the most suitable for producing WKB emulsions. Native starch of the stable cultivars exhibited higher pasting temperature, less peak, trough, and final viscosity. With enzymatic hydrolysis, starch of stable cultivars showed higher solubility index while less swelling power, and less short range order. The observations were further proved through microscopy observation and correlation analysis between starch properties and WKB milk stability attributes. These results contribute to understand molecular mechanism for improving WKB milk stability from perspective of endogenous starch, and provide valuable information for raw materials selection with typical starch characteristics.

Changes in Functional Properties and In Vitro Digestibility of Black Tartary Buckwheat Starch by Autoclaving Combination with Pullulanase Treatment

The processing properties of resistant starch (RS) and its digestion remain unclear, despite the widespread use of autoclaving combined with debranching in its preparation. In this study, the physicochemical, rheological and digestibility properties of autoclaving modified starch (ACB), autoclaving-pullulanase modified starch (ACPB) and native black Tartary buckwheat starch (NB) were compared and investigated. The molecular weight and polydispersity index of modified starch was in the range of 0.15 × 104~1.90 × 104 KDa and 1.88~2.82, respectively. In addition, the SEM results showed that both modifications influenced the morphological characteristics of the NB particles, and their particles tended to be larger in size. Autoclaving and its combination with pullulanase significantly increased the short-range ordered degree, resistant starch yield and water- and oil-absorption capacities, and decreased the syneresis properties with repeated freezing/thawing cycles. Moreover, rheological analysis showed that both ACB and ACPB exhibited shear-thinning behavior and lower gel elasticity as revealed by the power law model and steady-state scan. The degradation of starch chains weakened the interaction of starch molecular chains and thus changed the gel network structure. The in vitro digestion experiments demonstrated that ACB and ACPB exhibited greater resistance to enzymatic digestion compared to the control, NB. Notably, the addition of pullulanase inhibited the hydrolysis of the ACB samples, and ACPB showed greater resistance against enzymatic hydrolysis. This study reveals the effects of autoclaving combined with debranching on the processing properties and functional characteristics of black Tartary buckwheat starch.

Debranched Lentil Starch-Sodium Alginate-Based Encapsulated Particles of Lacticaseibacillus rhamnosus GG: Morphology, Structural Characterization, In Vitro Release Behavior, and Storage Stability

Starches with different degrees of debranching (DBS30, DBS60, and DBS90) and sodium alginate were used as the wall material for encapsulating particles of Lacticaseibacillus rhamnosus GG (LGG). The structural characteristics of these encapsulated particles were examined, along with the impact of varying levels of debranching on the encapsulation efficiency, the in vitro release of LGG under the simulated gastrointestinal environment, and the storage stability of the encapsulated particles. The results revealed a transformation in the crystalline polymorph from C- to B+V-type following debranching and retrogradation. This process also resulted in a significant decrease in molecular weight and polydispersity index, accompanied by an increase in amylose and resistant starch levels along with the relative crystallinity of the debranched lentil starch. Comparatively, DBS60-LGG and DBS90-LGG exhibited higher encapsulation efficiency and encapsulation yield than UDBS-LGG and DBS30-LGG. Furthermore, these encapsulated particles provided enhanced protection for LGG in both the simulated gastrointestinal environment and the storage process. It can be inferred that a superior encapsulation performance of the debranched lentil starch-sodium alginate-based encapsulated LGG particles was associated with higher debranching levels, a more uniform molecular weight distribution, and a more ordered multi-scale structure of the debranched lentil starch.

Exploring the remarkable effects of microwave treatment on starch modification: From structural evolution to changed physicochemical and digestive properties

As one of the crucial components of the food system, starch can be hydrolyzed into glucose after gastrointestinal digestion, so regulating its digestive properties is vital for maintaining health. Microwaves can promote the rearrangement of intramolecular structure of starch, thus improving its physicochemical properties, enhancing its slowly digestible features, and expanding its scope of application. This review zooms in describing recent research results concerning the effects of microwave treatment on the multi-scale structure and physicochemical properties of starch and summarizing the patterns of these changes. Furthermore, the changes in starch structure, resistant starch content, and glycemic index after digestion are pointed out to gain an insight into the enhancement of starch slowly digestible properties by microwave treatment. The resistance of starch to enzymatic digestion may largely hinge on the specific structures formed during microwave treatment. The multi-level structural evolutions of starch during digestion endow it with the power to resist digestion and lower the glycemic index. The properties of starch dictate its application, and these properties are highly associated with its structure. Consequently, understanding the structural changes of microwave-modified starch helps to prepare modified starch with diversified varieties and functional composites.

Effect of thermal, nonthermal, and combined treatments on functional and nutritional properties of chickpeas

Cicer arietinum or chickpea is an important and highly nutritious pulse, a source of complex carbohydrates, proteins, vitamins, and minerals, considered non-allergenic, and non-GMO crop. Processing technologies play an important role in modifying some chickpea properties and thus increasing its nutritional and health benefits. Herein is summarized and compared the available data on nutritional and functional aspects caused by thermal, nonthermal, and combinations of treatments for chickpea processing. The study focuses on describing the processing conditions necessary to change chickpea matrices aiming to enhance compound bioavailability, reduce anti-nutritional factors and modify functional characteristics for industrial application in product development. Thermal and nonthermal treatments can modify nutrient composition and bioavailability in chickpea matrices. Thermal treatments, moist or dry, prevent microbial spoilage, increase product palatability and increase protein quality. Nonthermal treatments aim to shorten the processing time and use less energy and water sources. Compared to thermal treatments, they usually preserve organoleptic attributes and bioactive compounds in chickpea matrices. Some treatment combinations can increase the efficacy of single treatments. Combined treatments increase antioxidant concentration, protein digestibility and available starch contents. Finally, despite differences among their effects, single and combined treatments can improve the nutritional and physicochemical properties of chickpea matrices.

Exploring the Impact of Solid-State Fermentation on Fava Bean Flour: A Comparative Study of Aspergillus oryzae and Rhizopus oligosporus

Fava bean (Vicia faba L.) is a protein-rich pulse with high nutritional value, but its functional and sensory characteristics limit its application in foods. Solid-state fermentation (SSF) can modify the composition of plant proteins, modulate its functionality, and enhance the sensory aspects. In this study, fava bean flour (FB) was fermented with Aspergillus oryzae and Rhizopus oligosporus to produce FBA and FBR, respectively, ingredients with distinct nutritional, functional, and aroma characteristics. The protein content increased by 20% in FBA and 8% in FBR, while fat levels rose more significantly in FBR (+40%). The overall content of fermentable oligo-, di-, mono-saccharides, and polyols (FODMAPs) decreased by 47% (FBA) and 57% (FBR), although polyol production by A. oryzae was observed. SSF improved the nutritional profile of FBA and FBR, with a notable increase in the concentration of essential amino acids observed, and a reduction in most antinutrients, with the exception of trypsin inhibitors. SSF resulted in the formation of aggregates, which increased the particle size and reduced protein solubility. Emulsions prepared with the fermented ingredients separated faster, and the foaming capacity of both FBA and FBR was decreased, but an increase in water-holding capacity was observed. SSF resulted in the production of predominantly savoury-associated aroma compounds, with compounds characteristic of metallic and mouldy aromas reduced. These results indicate the potential of SSF to transform FB with enhanced nutritional value and improved sensory and functional properties.

Effects of cold plasma pretreatment before different drying process on the structural and functional properties of starch in Chinese yam

This article compared the effects of hot air drying (HAD), infrared drying (IRD), and cold plasma (CP) as a pretreatment on the structure, quality, and digestive characteristics of starch extracted from yam. As the most commonly used drying method, HAD was used as a control. SEM and CLSM images showed that all treatments preserve the integrity of the yam starch. CP caused some cracks and breaks in the starch granules. IRD did not destroy the crystal structure of starch molecules, but made the spiral structure tighter and increased short-range orderliness. However, CP led to the depolymerization and dispersion of starch molecular chains, resulting in a decrease in average molecular weight and relative crystallinity. These molecular conformation changes caused by different processes led to differences in solubility, swelling power, pasting parameters, digestion characteristics, and functional characteristics. This study provided an important basis for the reasonable drying preparation and utilization of yam starch.

Effect of guar gum on the physicochemical properties and in vitro digestive characteristics of extruded starches

The present study assessed the impact of guar gum (GG) on the physical and chemical attributes and the in vitro digestibility of maize starch (MS), pea starch (PS), and sweet potato starch (SPS) subjected to extrusion treatment. Starch with 25 % moisture content and combined with GG in a 9:1 ratio was selected for extrusion. Scanning electron microscopy and differential scanning calorimetry reveal that extrusion disrupts the ordered structure of starch and induces aggregation of starch granules, resulting in a more cohesive structure, and GG addition led to the further evolution of this structure into a more intricate and irregular form. Rheological assessments demonstrated a remarkable enhancement in the gelatinization characteristics of starch with GG addition, which led to elevated flow resistance and increased viscosity. On evaluating the in vitro digestive characteristics, we noted that adding GG to starch augmented the levels of slow-digestible starch and resistant starch. Consequently, this resulted in diminished digestibility and a lowered glycemic index. In summary, GG synergistically interacts with starch, forming intricately assimilable components. Moreover, the effects of extrusion vary across different starches, which proves advantageous for SPS and GG amalgamation, thereby enhancing their resistant components. Conversely, extrusion manifests contrasting outcomes for MS and PS.

Structural, physicochemical and functional properties of high-pressure modified white finger millet starch

The effect of high-pressure processing (HPP) modification (200, 400, and 600 MPa for 10 min) on the physico-chemical, functional, structural, and rheological properties of white finger millet starch (WFMS) was studied. Measured amylose content, water, and oil absorption capacity, alkaline water retention, and pasting temperature increased significantly with the intensity of pressure. All color parameters (L, a, b values, and ΔC) were affected by HPP treatment, and paste clarity of modified starch decreased significantly with an increase in storage time. The samples' least gelation concentration (LGC) is in the range of 8-14 %. An increasing solubility and swelling power are noted, further intensifying at the elevated temperature (90 °C). The structural changes of WFMS were characterized by XRD, SEM, and FTIR spectroscopy. Starch modified at 600 MPa showed a similar pattern as 'B'-type crystalline, and the surfaces of starch deformed because of the gelatinization. Applied pressure of 600 MPa affected the FTIR characteristic bands at 3330, 2358, and 997 cm-1, indicating a lower crystallinity of the HPP-600 modified sample. According to DSC analysis, even at 600 MPa, WFMS is only partially gelatinized. This work provides insights for producing modified WFM starches by a novel physical modification method.

A Comprehensive Study on the Influence of Superheated Steam Treatment on Lipolytic Enzymes, Physicochemical Characteristics, and Volatile Composition of Lightly Milled Rice

Enzyme inactivation is crucial for enhancing the shelf life of lightly milled rice (LMR), yet the impact of diverse superheated steam (SS) treatment conditions on lipolytic enzyme efficiency, physicochemical properties, and volatile profiles of LMR remains unclear. This study investigated varying SS conditions, employing temperatures of 120 °C, 140 °C, and 160 °C and exposure times of 2, 4, 6, and 8 min. The research aimed to discern the influence of these conditions on enzyme activities, physicochemical characteristics, and quality attributes of LMR. Results indicated a significant rise in the inactivation rate with increased treatment temperature or duration, achieving a notable 70% reduction in enzyme activities at 120 °C for 6 min. Prolonged exposure to higher temperatures also induced pronounced fissures on LMR surfaces. Furthermore, intensive SS treatment led to a noteworthy 5.52% reduction in the relative crystallinity of LMR starch. GC/MS analysis revealed a consequential decrease, ranging from 44.7% to 65.7%, in undesirable odor ketones post-SS treatment. These findings underscore the potential of SS treatment in enhancing the commercial attributes of LMR.

Physicochemical, thermal, pasting, morphological, functional and bioactive binding characteristics of starches of different oat varieties of North-Western Himalayas

Starches were isolated from five oat varieties (SFO-1, SFO-3, Sabzar, SKO-20 and SKO-96) grown in North-Western Himalayas of India. Moisture content of the varieties ranged from 9.25 ± 0.09 to 13.21 ± 0.11 %, indicating their shelf-stability. Results suggested >90 % purity of starches as was evident from values of ash, proteins, and lipids. Amylose content results showed that all starches fall within category of intermediate-amylose starches. Lambdamax, blue value and OD620/550 were found significantly (p ≤ 0.05) higher in SKO-20. Sabzar exhibited higher starch hydrolysis percentage of 85.16 % whereas, lowest was observed in SKO-20 (78.12 %). Degree of syneresis was higher in SKO-20 however, its freeze-thaw stability was lesser. Wide peak in FTIR spectra at 3320 cm-1 confirms nature of starches. SKO-20 exhibited significantly higher onset gelatinization temperature (65.19 ± 1.06 °C) and enthalpy (15.78 ± 0.15 J/g) whereas, Sabzar exhibited lowest enthalpy. Pasting characteristics indicated lowest and highest final viscosity in SKO-20 (341.30 ± 2.11 mPas) and SKO-96 (1470 ± 4.56 mPas), respectively. SEM results indicated irregular and polygonal shape of starches with size <10 μm. SKO-20 exhibited lowest disintegration time of 2.08 ± 0.01 min and Sabzar showed highest (3.31 ± 0.07 min). SKO-20 released more curcumin (71.28 %) whereas, Sabzar released less. This suggests that SKO-20 could be used as better excipient for delivery of curcumin at target site.

Multi-scale structural characteristics of black Tartary buckwheat resistant starch by autoclaving combined with debranching modification

The impact of autoclaving or autoclave-debranching treatments on the multi-scale structure of resistant starch (RS) and the relationship with starch digestion remains unclear, despite their widespread use in its preparation. This work investigated the relationship between RS structure in black Tartary buckwheat and its digestibility by analyzing the effects of autoclaving and autoclave-debranching combined treatments on the multi-scale structure of RS. The results showed that black Tartary buckwheat RS exhibited a more extensive honeycomb-like network structure and enhanced thermal stability than either black Tartary buckwheat native starch (BTBNS) or common buckwheat native starch (CBNS). Autoclaving and autoclaving-debranching converted A-type native starch to V-type and possibly the formation of flavonoid-starch complexes. Autoclaving treatment significantly increased the proportion of short A chain (DP 6-12) and the amylose (AM) content, reduced the viscosity and the total crystallinity. Notably, the autoclave-debranching co-treatment significantly enhanced the resistance of starch to digestion, promoted the formation of perfect microcrystallines, and increased the AM content, short-range ordered degree, and the proportion of long B2 chain (DP 25-36). This study reveals the relationship between the multi-scale structure and digestibility of black Tartary buckwheat RS by autoclaving combined with debranching modification.

Anti-hyperlipidemic and ameliorative effects of chickpea starch and resistant starch in mice with high fat diet induced obesity are associated with their multi-scale structural characteristics

Chickpea starches were isolated from both untreated (UC-S) and conventionally cooked seeds (CC-S), and their multi-scale structural characteristics and in vivo physiological effects on controlling hyperlipidemia in high fat diet induced obese mice were compared with their corresponding resistant starch (RS) fractions obtained by an in vitro enzymatic isolation method (UC-RS and CC-RS). The degree of order/degree of double helix in Fourier transform infrared spectroscopy was in the following order: CC-RS > UC-RS > CC-S > UC-S, which was consistent with the trend observed for relative crystallinity and double helix contents monitored by X-ray diffractometer and solid-state ¹³C cross-polarization and magic angle spinning NMR analyses. The influence of different types of chickpea starch and their corresponding resistant starch fractions on regulating the serum lipid profile, antioxidant status, and histopathological changes in liver, colon and cecal tissues, and gene expressions associated with lipid metabolism, gut microbiota, as well as short-chain fatty acid metabolites in mice with high fat diet induced obesity was investigated. The results showed that the chickpea RS diet group exhibited overall better anti-hyperlipidemic and ameliorative effects than those of the starch group, and such effects were most pronounced in the CC-RS intervention group. After a six-week period of administration with chickpea starch and RS diets, mice in the UC-RS and CC-RS groups tended to have relatively significantly higher levels (P < 0.05) of butyric acid in their fecal contents. The 16S rRNA sequencing results revealed that mice fed with CC-RS showed the greatest abundance of Akkermansia and Lactobacillus compared with the other groups.

Nonthermal physical modification of starch: An overview of recent research into structure and property alterations

To tailor the properties and enhance the applicability of starch, various ways of starch modification have been practiced. Among them, physical modification methods (micronization, nonthermal plasma, high-pressure, ultrasonication, pulsed electric field, and γ-irradiation) are highly potential for starch modification considering its safety, environmentally friendliness, and cost-effectiveness, without generating chemical wastes. Thus, this article provides an overview of the recent advances in nonthermal physical modification of starch and summarizes the resulting changes in the multi-level structures and physicochemical properties. While the effect of these techniques highly depends on starch type and treatment condition, they generally lead to the destruction of starch granules, the degradation of molecules, decreases in crystallinity, gelatinization temperatures, and viscosity, increases in solubility and swelling power, and an increase or decrease in digestibility, to different extents. The advantages and shortcomings of these techniques in starch processing are compared, and the knowledge gap in this area is commented on.

Loss factor and moisture diffusivity property estimation of lentil crop during microwave processing

Characterization of loss factor and moisture diffusivity are required to understand materials' precise behavior during microwave processing. However, providing the processing facilities to measure these properties in a real or simulated situation directly can be complicated or unachievable. Hence, this study proposes an alternative procedure for modeling these properties according to their affecting factors including temperature, and moisture content. The basis of this method is to use an algorithm that combines the optimization approach and the numerical solution of the heat and mass transfer governing equations, including boundary conditions. For this aim, the coefficients of estimated models for loss factor and moisture diffusivity were obtained by minimizing the sum square error of the experimentally measured mean surface temperature and moisture content and the predicted values by solving the system of partial differential equations. The suggested models illustrated that during the microwave process, the moisture diffusivity grows arithmetically, and the loss factor generally raises, but transition points were observed in the trend for the samples tempered up to the 50% moisture content. These points have been attributed to the starch gelatinization and confirm how the bio-chemical reaction would have a noticeable effect on this property, determining the microwave energy absorbance. The results of differential scanning calorimetry thermograms and the Fourier transform mid-infrared spectra of flours obtained from microwave processed lentil seeds also confirmed the greatest intensity of starch structure alteration happened for the samples tempered to 50% moisture content by showing the highest shifts in the endothermic peak and lowest degree of order.

Determination of starch crystallinity with the Fourier-transform terahertz spectrometer

We measured the terahertz (THz) spectra of native, amorphous, and dried starches derived from corn and potato using the Fourier-transform (FT) system and compared these spectra to the X-ray diffraction (XRD) patterns. Both native corn and potato starches had seven absorption peaks in the terahertz regions, but five peaks were observed in the amorphous states. While spectral changes slightly occurred in corn starch even after drying, increase and decrease in the terahertz peak intensities were obtained in potato starch during drying. Similar changes in both starches during amorphization and drying were obtained in the X-ray diffraction patterns, and the correlations were found between terahertz peaks and the X-ray signals. Since the intensity of the peak at 9.0 THz was correlated with crystallinity obtained using an X-ray diffraction (r² = 0.98), our data indicate that the Fourier-transform terahertz spectrometer can be a new analytical device to measure the starch crystallinity.

Physicochemical and multi-scale structural alterations of pea starch induced by supercritical carbon dioxide + ethanol extraction

The objective of this study was to establish the impacts of supercritical fluid extraction (SFE) processing on the physicochemical properties of pea flour and the structure of isolated pea starch. A significant (p < 0.05) increase in protein content and reduction in several pasting and thermal parameters as measured by rapid visco-analyzer and differential scanning calorimeter were observed after SFE. Additionally, SFE increased starch digestibility as determined by an in vitro starch digestion assay. An increased amylopectin content and crystallinity along with the loss of double helix content was supported by size exclusion chromatography and FT-IR data, respectively. X-ray diffraction and scanning electron microscopy showed minimal alterations of starch, by SFE, in long-range crystalline and morphological structure of starch granules, respectively. The data demonstrated SFE influenced the physicochemical and structural characteristics of pea starch. These outcomes illustrated that SFE might be a green and novel technology for starch modification.

Effect of Controlled Hydrothermal Treatments on Mung Bean Starch Structure and Its Relationship with Digestibility

The changes in structure and digestion properties of mung bean starch due to hydrothermal treatment at various controlled temperatures were investigated. Results showed the increase in onset temperature (T_o) from 66.33 °C to 76.69 °C and decrease in enthalpies (∆H_g and ∆H_r) until the starch was completely gelatinized. The degree of molecular order (DMO) and degree of double helix (DDH) were significantly (p < 0.05) reduced from 1.35 to 1.01 and 1.38 to 0.98 respectively. X-ray diffraction (XRD) indicated the consecutive decrease in relative crystallinity (RC) while RVA analysis showed that peak and final viscosities were decreased significantly (p < 0.05). However, digestion kinetics indicated that degree of gelatinization increased the access of enzymes. As starch was partially gelatinized it yielded significantly lower glycemic index but no significant (p > 0.05) change in starch digestibility was observed after 70 °C. Hence, 70 °C can be considered as the critical hydrothermal treatment temperature in mung bean starch. Pearson's correlation analysis indicated that controlled hydrothermal treatment had negative effect on the DMO, DDH, RC and the granular damage increased vulnerability of mung bean starch to digestion. These findings gave insight into sequential changes in the structure and digestibility occurring during gelatinization process due to hydrothermal treatment. Controlled gelatinization in mung beans at 70 °C is useful and must be employed to produce the foods with lower starch digestibility.

Morphological, physico-chemical and functional properties of underutilized starches in China

In this study, starches were isolated from different non-conventional sources (acorn, black wheat, buckwheat, coix seed, jiaoyu, kuzhu, longya lily, and naked oat) cultivated in China, and their morphological, physico-chemical, and functional properties were analyzed. Among isolated starches, significant differences (p < 0.05) were observed in morphology, pasting, crystallinity, physico-chemical, and functional properties. After a comparison with commercial corn starch, all these isolated starches presented promising and unique characteristics. The XRD profile of isolated starches presented A-type (naked oat, buckwheat, coix seed, and black wheat), B-type (longya lily, acorn and jiaoyu) and C-type (kuzhu) polymorphic structures. SEM analysis revealed that the starches isolated from different sources showed distinct shapes exclusively globular, elliptic, and polygonal shapes. The high viscosity of jiaoyu and kuzhu starch pastes can be utilized to have an advantage in instant soups and sauces. Hence, the present study will improve the scientific basis on starches from different non-conventional sources, facilitate their utilization in a variety of applications.

Effect of repeated heat-moisture treatments on the structural characteristics of nanocrystals from waxy maize starch

The effect of repeated heat-moisture treatment (RHMT) on the structural characteristics of waxy maize starch nanocrystals was investigated. Compared with native waxy maize starch (WMS), waxy maize starch nanocrystals (WMSNs) changed the crystalline pattern from A-type to B-type, and displayed the lower crystallinity (RC), molecular order (MO), enthalpy (∆H) and double-helix (DH) content, indicating a reduction in the long- and short-range orders of starch molecules. Single heat-moisture treatment significantly increased values, including RC, MO, α (power law exponent obtained by SAXS), ∆H, DH, and the melting temperatures (To, Tp and Tc), while repeated heat-moisture treatment further increased values of these parameters except ∆H, indicating the reinforcement of the long- and short-range orders of WMSNs. In addition, repeated heat-moisture treatment also caused a gradual conversion from B-type to "A + B"-type (Cb, Cc to Ca polymorphs in sequence) and finally to A-type crystallites.

Structural and physicochemical properties of ginger (Rhizoma curcumae longae) starch and resistant starch: A comparative study

The objectives of this study were to investigate and compare the structural and physicochemical properties of native ginger starch (NGS) and ginger resistant starch (GRS). NGS had oblate and compact granules, whereas GRS exhibited fissures. Compared to GRS, NGS had a narrower molar mass distribution and a higher molecular weight (Mw). According to X-ray diffraction measurements, Fourier transform infrared spectroscopy, and 13C CP/MAS NMR spectroscopy, NGS sample had an A-type crystalline pattern with high relative crystallinity and short-range order structure, and GRS had a B-type crystalline pattern. Furthermore, NGS exhibited significantly higher gelatinization enthalpy than GRS. NGS displayed lower peak viscosity and final viscosity, whereas GRS had higher through viscosity and final viscosity, presumably due to the content and type of resistant starch. The pasting and gelatinization properties of NGS and GRS might be related to relative crystallinity and short-range order structure. The information obtained from this study can be used by manufacturers and researchers in the production of ginger-containing products.