Extraction of red beet extract with β-cyclodextrin-enhanced ultrasound assisted extraction: A strategy for enhancing the extraction efficacy of bioactive compounds and their stability in food models

Extraction and Analysis of Natural Color From Beetroot (Beta vulgaris L.) Using Different Techniques, and Its Utilization in Ice Cream Manufacturing

A rich source of natural color, beetroot (Beta vulgaris L. subsp. vulgaris) extracts and colorants offer deep red color to the dishes and boost their nutritional and antioxidant value. This research extracted beetroot color using Soxhlet, cold press, and ultrasonic methods. After testing the extracts for yield %, color (L*, a*, and b*), betalains, total polyphenols, and antioxidant activity, the colorant was used to make ice cream. The results of three techniques revealed that the extract obtained from Soxhlet extraction (SE) has more total phenolic content (244.11 mg GAE/100 g), DPPH free radical scavenging activity (23.41%), significantly higher yield (48.05%), and better color results, as compared to the other extraction techniques. However, the contents of betalains (399.47 mg/L) were observed more in the extract obtained from ultrasonic extraction (UE). The extract obtained after the SE technique was further utilized in the ice cream manufacturing to check its acceptability in this product, compared to the artificial color. Six samples of ice cream were developed having different ratios of beetroot-derived color and artificial color. Control ice cream (T0) contained artificial color, whereas ice cream (T5) was developed by replacing complete artificial color with beetroot-derived color. The other treatments (T1), (T2), (T3), and (T4) contained a combination of both natural and artificial colors with different proportions. Various quality parameters of these ice cream formulations, such as pH, acidity, brix, melting rate, overrun, and specific gravity, were studied. The result signified that the addition of beetroot color did not have a considerable effect on these attributes. The result of color analysis of ice cream suggested that the mean value of L* is higher in T5 (73.16), which only contains 0.1% beetroot color, and is lowest in T0 (65.24), which contains 0.1% artificial color. The addition of natural colorant resulted in a higher L* value. Sensory characteristics including color, mouth coating, flavor, aroma, texture, and overall acceptability of T5 showed more acceptance and significant results as compared to other treatments that contained artificial colors. Therefore, the beetroot-derived natural colorants could be employed to develop nutritional, healthy, and acceptable ice cream.

Development and characterization of wax-bovine bone protein-grapeseed oil composite oleogels: Experimental and molecular simulation studies

Three new types of composite oleogel formulations were designed. Specifically, oleogels were prepared using 90% grapeseed oil as the oil phase and carnauba wax (CW)/beeswax/rice bran wax-bovine bone protein (BBP) as gelators. All samples were solid and had an oil-binding capacity of >90%. BBP addition considerably improved the waxy texture of the oleogel and had an important effect on the crystalline network. X-ray diffractometry indicated that BBP increased the β'-crystal content. All samples showed sol-gel thermodynamic behavior under temperature scanning. Fourier-transform infrared spectroscopy and molecular docking confirmed the formation of noncovalent interactions dominated by van der Waals forces during the development of the oleogel. The optimal components of the three oleogels exhibited an excellent effect of slowing down the release of free fatty acids. This study could serve as a reference for the development and application of wax-protein as a new binary gelator in the food industry.

Extraction of Purple Prickly Pear (Opuntia ficus-indica) Mucilage by Microfiltration, Composition, and Physicochemical Characteristics

Mucilages are valuable to the food industry, but the solvents used to extract and concentrate them are detrimental to the environment. Therefore, environmentally friendly technologies that preserve the properties of biopolymers and reduce the use of solvents are being sought. In this work, the mucilage of Opuntia ficus-indica (mesocarp-endocarp) was extracted by two methods: In the first one, the pulp from the mesocarp-endocarp was extracted by ethanol precipitation and centrifugation cycles, then dried at room temperature. For the second, the pulp was processed in a three-step tangential microfiltration process: microfiltration (separation), diafiltration (purification), and concentration. The mucilages obtained differed significantly (p < 0.05) in color, betalains, total sugars, and proteins. The proportions of insoluble and soluble dietary fiber were similar. GC/MS analysis identified seven neutral sugars and a high content of uronic acids (31.3% in the microfiltered mucilage and 47.5% in the ethanol-precipitated mucilage). These show a low degree of esterification, which gives them a polar and hydrophilic character and the possibility of interacting with divalent ions through the carboxylic acid groups, which could form gels stabilized by an egg-box mechanism, with application as a thickening, stabilizing, gelling, or film-forming agent for foods with low sugar content.

Effects of ultrasonic-assisted natural deep eutectic solvent on the extraction rate, stability and antifungal ability of polyphenols from Cabernet Sauvignon seeds

Ultrasonic-assisted extraction using a natural deep eutectic solvent (UAE-NADES) is an efficient method for extracting grape seed polyphenols (GSPs). In this study, response surface methodology was used to optimize the extraction of GSPs with UAE-NADES, and the theoretical extraction rate of GSPs was 139.014 mg GAE/g, the actual extraction rate was 135.78 ± 1.3 mg GAE/g. A pseudo-second-order kinetic extraction fitting was established to simulate the extraction process and mechanism (R2 > 0.99). Analysis of antioxidant capacity, Fourier-infrared spectroscopy and scanning electron microscopy revealed that UAE-NADES works synergetically to maintain the stability of extracted GSPs. The results of high-performance liquid chromatography showed that catechin (41.14 mg/g) is the main component of GSPs in the extract. The UAE-NADES extraction of GSPs can inhibit the growth of Alternaria alternata at 0.25 mg GAE/g, while the GSPs extracted by other methods can effectively inhibit the growth of Alternaria alternata at 0.35 mg GAE/g. Thus, this study demonstrates that UAE-NADES is a high-efficiency means of extracting GSPs and, in a wider sense, is a promising extraction technology for the green utilization of waste resources.

Design, Optimization, and Modeling Study of Ultrasound-Assisted Extraction of Bioactive Compounds from Purple-Fleshed Sweet Potatoes

This study focuses on optimizing the ultrasound-assisted extraction (UAE) of bioactive compounds from purple-fleshed sweet potatoes (PFSP) for potential use as natural colorants. Factors such as time, temperature, and solid-to-liquid ratio were varied using a Box-Behnken Design. The optimal conditions were determined as 75 min, 70 °C, and a 1:15 m/v solid-to-liquid ratio, resulting in 18.372 mg/100 g total anthocyanin (TA) and 151.160 mg GAE/100 g total phenolic content (TPC). The validation yielded 18.822 mg/100 g for total anthocyanin and 162.174 mg GAE/100 g for total phenolic content, showing a 7% difference from predictions. UAE significantly increased TA extraction by 81% and TPC by 93% compared with the conventional method, with a notable reduction in process time from 24 h to 75 min. Additionally, three kinetic models were tested to compare extraction mechanisms, confirming the efficiency of UAE for PFSP bioactive compound recovery. This study proposes the UAE technique as a highly effective means of extracting bioactive compounds from PFSP, offering promising applications across multiple industries.

Impact of thermal processing on dietary flavonoids

Flavonoids are a class of polyphenols which are widely distributed in natural products and foods. They have diverse bioactivities, including anti-inflammatory, anti-aging, and antioxidant activities. Generally, the foods rich in flavonoids are usually consumed after thermal processing. However, thermal stability of flavonoids is usually low, and thermal processing could cause either positive or negative influences on their stability and bioactivities. In this review, the effects of thermal processing on thermal stability and bioactivity of dietary flavonoids from different food sources are summarized. Then, strategies to improve thermal stability of dietary flavonoids are discussed and the effect of some promising thermal technologies are also preliminary clarified. The promising thermal technologies may be alternative to conventional thermal processing technologies.

Effects of Larrea nitida nanodispersions on the growth inhibition of phytopathogens

Larrea nitida Cav. (Zygophyllaceae) is a plant endemic to Argentina and Chile, and its extract has been studied over the last years due to the presence of antimicrobial agents that can be used to control the growth of some pathogens in agriculture. However, the extract is highly hydrophobic, which strongly affects its fungicidal activity in aqueous media. In this sense, the solid dispersion technique was used to produce L. nitida extract nanodispersions with polyethylene glycol (PLE) and with polyethylene glycol and zinc acetate (PZLE). In order to further evaluate the activity of the extract in PLE and PZLE, blank nanodispersions containing only polyethylene glycol (PEG) and zinc acetate (PZ) without the addition of the extract were also produced. The fungicidal activity of the water-soluble nanoparticles was evaluated at different concentrations (0.037-0.110 g.mL-1). In general, the nanoparticles were successfully produced on a nanometric size and presented a significant inhibitory activity on the growth of the pathogens Fusarium oxysporum and Fusarium verticillioides in aqueous media. Compared to PLE, PZLE presented increased fungistatic activity, possibly due to their increased solubility in water. Even though their application in agriculture should be further investigated, the nanodispersions present great potential to be applied as a green biotechnological tool.

Optimization of β-Cyclodextrin-Assisted Extraction of Apigenin and Luteolin from Chrysanthemum indicum L. Using Response Surface Methodology Combined with Different Optimization Algorithms and Evaluation of Its Antioxidant Capacity

Cyclodextrins and their derivatives have shown successful applications in extracting active compounds from medicinal plants. However, the use of β-cyclodextrin derivatives for extracting apigenin and luteolin from Chrysanthemum indicum L. remains unexplored. Additionally, the application of nature-inspired optimization algorithms in optimizing extraction conditions has been limited. Therefore, this study was performed with the aims of optimizing the extraction of apigenin and luteolin from C. indicum with the assistance of 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) using response surface methodology combined with various optimization algorithms, including desirability function approach, genetic algorithm, particle swarm optimization, and firefly algorithm. The results showed that the optimal conditions obtained by the four algorithms were consistent, with an extraction time of 60 min, HP-β-CD concentration of 30 mg/mL, and a solvent-to-solid ratio of 24 mg/mL. At these conditions, the apigenin and luteolin contents were 1.362±0.008 and 8.724±0.117 mg/g, respectively. The results also showed that HP-β-CD-assisted extraction exhibited significantly higher apigenin and luteolin contents compared to conventional solvent. Comparable results were also yielded from the antioxidant assay. Our study suggested that the nature-inspired optimization algorithms might be potential options in enhancing the effectiveness of the traditional response surface methodology for the optimization of extraction of natural products.

A comprehensive review of recent development in extraction and encapsulation techniques of betalains

Betalains are attractive natural pigments with potent antioxidant activity, mainly extracted from the roots, tubers, leaves, flowers, and fruits of certain plants and some fungi. They constitute a reliable alternative to synthetic dyes used in the food industry and are considered toxic for consumers. In addition, there is convincing evidence of their health benefits for consumers. However, betalains are highly unstable to environment factors, such as light, heat, oxygen, water activity, and pH change which can be degraded during food processing, handling, storage, or delivery. Therefore, newly developed extraction methods and micro/nano-encapsulation techniques are currently applied to enhance the extraction yield, solve their instability problems, and improve their application in the food industry. This article aims to summarize the new advanced extraction methods of betalains, discussing the recent encapsulation techniques concerning the different encapsulating materials utilization. Betalains, natural pigments with potent antioxidant activity, are increasingly extracted from the roots, tubers, leaves, flowers, and fruits of certain plants and some fungi as safe alternatives to synthetic food dyes used in the food industry. However, their susceptibility to degradation during food processing, storage, and delivery poses challenges. Recent developments in extraction methods (e.g., supercritical fluid, pressurized liquid, ultrasound- and microwave-assisted, and enzyme-assisted) enhance betalain recovery, minimizing degradation. Encapsulation techniques using biopolymers, proteins, lipids, and nanoparticles protect betalains from environmental factors, extending shelf life and enabling controlled release. These advancements offer improved extraction efficiency, reduced solvent use, shorter processing times, and enhanced stability. Integration of these techniques in the food industry presents opportunities for incorporating betalains into various products, including functional foods, beverages, and dietary supplements. By addressing stability challenges, these developments support the production of innovative, healthier food items enriched with betalains. This article provides an overview of recent advancements in betalain extraction and encapsulation, highlighting their potential applications in the food industry.

Coordinated encapsulation by β-cyclodextrin and chitosan derivatives improves the stability of anthocyanins

To improve the stability of anthocyanins (ACNs), ACNs were loaded into dual-encapsulated nanocomposite particles by self-assembly using β-cyclodextrin (β-CD) and two different water-soluble chitosan derivatives, namely, chitosan hydrochloride (CHC) and carboxymethyl chitosan (CMC). The ACN-loaded β-CD-CHC/CMC nanocomplexes with small diameters (333.86 nm) and had a desirable zeta potential (+45.97 mV). Transmission electron microscopy (TEM) showed that the ACN-loaded β-CD-CHC/CMC nanocomplexes had a spherical structure. Fourier-transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (¹H NMR) and X-ray diffraction (XRD) confirmed that the ACNs in the dual nanocomplexes were encapsulated in the cavity of the β-CD and that the CHC/CMC covered the outer layer of β-CD through noncovalent hydrogen bonding. The ACNs from the dual-encapsulated nanocomplexes improved stability of ACNs under adverse environmental conditions or in a simulated gastrointestinal environment. Further, the nanocomplexes exhibited good storage stability and thermal stability over a wide pH range when added into simulated electrolyte drinks (pH = 3.5) and milk tea (pH = 6.8). This study provides a new option for the preparation of stable ACNs nanocomplexes and expands the applications for ACNs in functional foods.

Study of Influence of Extraction Method on the Recovery Bioactive Compounds from Peel Avocado

The avocado peel is a waste material from consumption avocado (Persea americana Mill.) with big biotechnology potential. The purpose of the present work was to study the influence of six extraction methods, maceration (M), maceration plus β-cyclodextrin (MβC), solid-state fermentation (SSF), sonication with water or ethanol, wet grinding (WG), wet grinding plus maceration (WGM), on the recovery of bioactive compounds from the avocado peel such as total phenols, epicatechin and chlorogenic acid. The results showed that the extraction method has a significant effect on the content of total phenols, the WGM method obtaining the highest value of total phenols (2143.1 mg GAE/100 g dry weight). Moreover, the results indicated that the extraction method had a significant effect on chlorogenic acid and epicatechin recovery, the WGM method obtaining the highest amount of epicatechin and chlorogenic acid, 181.7 and 244.3 mg/100 g dry matter, respectively. Additionally, the characterization of WGM extract was realized by UPLC-ESI-MS/MS and GC-MS. Thus, the WGM method allowed for obtaining good yields of recovery of phenolic compounds using an accessible technology and a more environment-friendly solvent.

Assisted Extraction with Cyclodextrins as a Way of Improving the Antidiabetic Activity of Actinidia Leaves

Five varieties of Actinidia leaves (Geneva, Jumbo, Ken's Red, Kijivska Hibridna, and Sentyabraskaya) were analyzed. The profiles of active compounds were determined, namely quercetin, rutin, epicatechin, chlorogenic acid, and kaempferol, in the raw material. Suspecting that the raw material might prove important in the treatment of diabetes, the authors assessed the antioxidant activity and the ability to inhibit enzymes responsible for the development of diabetes (α-glucosidase and α-amylase). As a result of the conducted analysis, the Ken's Red variety was indicated as having the highest biological activity (DPPH IC₅₀ = 0.332 ± 0.048; FRAP IC_0.5 = 0.064 ± 0.005; α-glucosidase inhibition IC₅₀ = 0.098 ± 0.007; α-amylase inhibition IC₅₀ = 0.083 ± 0.004). In order to increase the efficiency of the extraction of active compounds from Ken's Red variety leaves, cyclodextrins (α-CD, β-CD, and γ-CD) were used as extraction process enhancers. The obtained results showed a significant increase in the contents of extracted active compounds. In addition, the type of CD used enhanced the extraction of selected compounds (quercetin, kaempferol, rutin, chlorogenic acid, and epicatechin. This study shows that the application of cyclodextrin-based extraction significantly improved the leaf activity of the Ken's Red variety (DPPH IC₅₀ = 0.160 ± 0.019; FRAP IC_0.5 = 0.008 ± 0.001; α-glucosidase inhibition IC₅₀ = 0.040 ± 0.002; α-amylase inhibition IC₅₀ = 0.012 ± 0.003).

Pomegranate peel phenolics: One step water extraction, in vitro antiproliferative activity, and effect on sensory attributes of muffins and cheese

Pomegranate is one of the richest fruits species in bioactive compounds, including its non-edible parts. In this work, a simple, rapid and environmentally-friend is described. It allowed the recovery of 108 mg of bioactive per gram of enriched extract from pomegranate peel (PomPE). The quality of PomPE was assessed in terms of antiproliferative activity and its influence on the sensory attributes on muffins and cheese was evaluated. Results showed an IC50 of ∼ 50 µg/ml, which was equal to extract obtained by ethanol 70%. The incorporation of PomPE in muffins formulation improved some sensory attributes by 10%. However, overall, the supplementation of cheese led to a decrease of the sensory parameters. The results concluded that the described method could be an alternative to the conventional techniques to obtain enriched extract with high potential of valorization in food and pharmaceutical sectors.

An innovative extraction strategy for herbal medicine by adopting p-sulphonatocalix[6]/[8]arenes

INTRODUCTION

Alkaloids exist in various herbal medicine widely and exhibit diverse biological and pharmacological activities. p-Sulphonatocalix[6]arenes (SC6A) and p-sulphonatocalix[8]arenes (SC8A) are water-soluble supramolecular macrocycles and are applied to the extraction of alkaloids from herbal products.

OBJECTIVE

In this study, an innovative method of SC6A/SC8A assisted extraction of the alkaloids from herbs was established.

METHODS

SC6A and SC8A were designed to extract 27 alkaloids from seven herbal medicines. Based on the significant solubilisation and extraction effect, Stephaniae Tetrandrae Radix (Fangji, FJ) was selected to obtain the optimal extraction process by adopting single factor test and orthogonal experiment. Then, the alkaloids and SC6A/SC8A were separated by one-step alkalisation and SCnA were reused. The host-guest complexes between alkaloids and SCnA were determined by competitive fluorescence titration, differential scanning calorimetry (DSC), Fourier-transform infrared (FTIR) and proton nuclear magnetic resonance (¹ H-NMR) analysis.

RESULTS

The optimum condition for SC6A assisted extraction was 5:1:80 (g/g/mL) for herbs/SC6A/solution ratio, 355-250 μm particle size and ultrasonicate 0.5 h, whilst 10:1:40 (g/g/mL) for herbs/SC8A/solution ratio, 355-250 μm particle size and ultrasonicate 0.5 h for SC8A assisted extraction. The total yield of alkaloids (fangchinoline and tetrandrine) from FJ was increased by 4.87 times and 5.97 times with SC6A and SC8A. Moreover, a good reusability of SC6A/SC8A was achieved by alkalisation dissociation. Host-guest complexes were determined by competitive fluorescence titration at a molar ratio of 1:1 between most alkaloids (25/27, except evodiamine and rutaecarpine) and SC6A/SC8A. The complex structure was proved by DSC, FTIR and ¹ H-NMR analysis.

CONCLUSION

The study provided an effective eco-friendly and energy-saving extraction method of alkaloids from herbal medicine.

Ultrasound-Assisted Extraction and the Encapsulation of Bioactive Components for Food Applications

Various potential sources of bioactive components exist in nature which are fairly underutilized due to the lack of a scientific approach that can be sustainable as well as practically feasible. The recovery of bioactive compounds is a big challenge and its use in food industry to develop functional foods is a promising area of research. Various techniques are available for the extraction of these bioactives but due to their thermolabile nature, there is demand for nonthermal or green technologies which can lower the cost of operation and decrease operational time and energy consumption as compared to conventional methods. Ultrasound-assisted extraction (UAE) is gaining popularity due to its relative advantages over solvent extraction. Thereafter, ultrasonication as an encapsulating tool helps in protecting the core components against adverse food environmental conditions during processing and storage. The review mainly aims to discuss ultrasound technology, its applications, the fundamental principles of ultrasonic-assisted extraction and encapsulation, the parameters affecting them, and applications of ultrasound-assisted extraction and encapsulation in food systems. Additionally, future research areas are highlighted with an emphasis on the energy sustainability of the whole process.

A comprehensive review of beetroot (Beta vulgaris L.) bioactive components in the food and pharmaceutical industries

Beetroot is rich in various bioactive phytochemicals, which are beneficial for human health and exert protective effects against several disease conditions like cancer, atherosclerosis, etc. Beetroot has various therapeutic applications, including antioxidant, antibacterial, antiviral, and analgesic functions. Besides the pharmacological effects, food industries are trying to preserve beetroots or their phytochemicals using various food preservation methods, including drying and freezing, to preserve their antioxidant capacity. Beetroot is a functional food due to valuable active components such as minerals, amino acids, phenolic acid, flavonoid, betaxanthin, and betacyanin. Due to its stability, nontoxic and non-carcinogenic and nonpoisonous capabilities, beetroot has been used as an additive or preservative in food processing. Beetroot and its bioactive compounds are well reported to possess antioxidant, anti-inflammatory, antiapoptotic, antimicrobial, antiviral, etc. In this review, we provided updated details on (i) food processing, preservation and colorant methods using beetroot and its phytochemicals, (ii) synthesis and development of several nanoparticles using beetroot and its bioactive compounds against various diseases, (iii) the role of beetroot and its phytochemicals under disease conditions with molecular mechanisms. We have also discussed the role of other phytochemicals in beetroot and their health benefits. Recent technologies in food processing are also updated. We also addressed on molecular docking-assisted biological activity and screening for bioactive chemicals. Additionally, the role of betalain from different sources and its therapeutic effects have been listed. To the best of our knowledge, little or no work has been carried out on the impact of beetroot and its nanoformulation strategies for phytocompounds on antimicrobial, antiviral effects, etc. Moreover, epigenetic alterations caused by phytocompounds of beetroot under several diseases were not reported much. Thus, extensive research must be carried out to understand the molecular effects of beetroot in the near future.

Betalains and their applications in food: The current state of processing, stability and future opportunities in the industry

Betalains are water-soluble nitrogenous pigments with coloring properties and antioxidant activities, which is why they have been incorporated into several foods. However, their use is limited by their instability in response to different factors, such as, pH, oxygen, water activity, light, metals, among others. In this work, a review of up-to-date and relevant information is presented on the primary natural sources of betalains. Additionally, the advantages and disadvantages of the primary betalain extraction techniques are discussed and compared. The results of these studies were focused on the stability of betalains when incorporated into foods, either in pure or encapsulated form, and they are discussed through different technologies. Lastly, the most relevant information related to their stability and a projection of their promising future applications within the food industry is presented.

Ultrasonic Processing of Food Waste to Generate Value-Added Products

Ultrasonic processing has a great potential to transform waste from the food and agriculture industry into value-added products. In this review article, we discuss the use of ultrasound for the valorisation of food and agricultural waste. Ultrasonic processing is considered a green technology as compared to the conventional chemical extraction/processing methods. The influence of ultrasound pre-treatment on the soluble chemical oxygen demand (SCOD), particle size, and cell wall content of food waste is first discussed. The use of ultrasonic processing to produce/extract bioactives such as oil, polyphenolic, polysaccharides, fatty acids, organic acids, protein, lipids, and enzymes is highlighted. Moreover, ultrasonic processing in bioenergy production from food waste such as green methane, hydrogen, biodiesel, and ethanol through anaerobic digestion is also reviewed. The conversion of waste oils into biofuels with the use of ultrasound is presented. The latest developments and future prospective on the use of ultrasound in developing energy-efficient methods to convert food and agricultural waste into value-added products are summarised.

Optimising the Polyphenolic Content and Antioxidant Activity of Green Rooibos (Aspalathus linearis) Using Beta-Cyclodextrin Assisted Extraction

Antioxidant activity associated with green rooibos infusions is attributed to the activity of polyphenols, particularly aspalathin and nothofagin. This study aimed to optimise β-cyclodextrin (β-CD)-assisted extraction of crude green rooibos (CGRE) via total polyphenolic content (TPC) and antioxidant activity assays. Response surface methodology (RSM) permitted optimisation of β-CD concentration (0−15 mM), temperature (40−90 °C) and time (15−60 min). Optimal extraction conditions were: 15 mM β-CD: 40 °C: 60 min with a desirability of 0.985 yielding TPC of 398.25 mg GAE·g−1, metal chelation (MTC) of 93%, 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging of 1689.7 µmol TE·g−1, ferric reducing antioxidant power (FRAP) of 2097.53 µmol AAE·g−1 and oxygen radical absorbance capacity (ORAC) of 11,162.82 TE·g−1. Aspalathin, hyperoside and orientin were the major flavonoids, with quercetin, luteolin and chrysoeriol detected in trace quantities. Differences (p < 0.05) between aqueous and β-CD assisted CGRE was only observed for aspalathin reporting the highest content of 172.25 mg·g−1 of dry matter for extracts produced at optimal extraction conditions. Positive, strong correlations between TPC and antioxidant assays were observed and exhibited regression coefficient (R2) between 0.929−0.978 at p < 0.001. These results demonstrated the capacity of β-CD in increasing polyphenol content of green rooibos.

Insight into the Progress on Natural Dyes: Sources, Structural Features, Health Effects, Challenges, and Potential

(1) Background: Dyes play an important role in food, medicine, textile, and other industries, which make human life more colorful. With the increasing demand for food safety, the development of natural dyes becomes more and more attractive. (2) Methods: The literature was searched using the electronic databases PubMed, Web of Science, and SciFinder and this scoping review was carried out following Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). (3) Results: 248 articles were included in this review. This review summarizes the research progress on natural dyes in the last ten years. According to structural features, natural dyes mainly include carotenoids, polyphenols, porphyrins, and alkaloids, and some of the newest dyes are summarized. Some pharmacological activities of carotenoids, anthocyanin, curcumin, and betalains in the last 10 years are summarized, and the biological effects of dyes regarding illumination conditions. The disadvantages of natural dyes, including sources, cost, stability, and poor bioavailability, limit their application. Here, some feasible strategies (potential resources, biotechnology, new extraction and separation strategies, strategies for improving stability) are described, which will contribute to the development and utilization of natural dyes. (4) Conclusion: Natural dyes show health benefits and potential in food additives. However, it is necessary for natural dyes to pass toxicity tests and quality tests and receive many regulatory approvals before their final entry into the market as food colorants or as drugs.

Small molecules of herbal origin for osteoarthritis treatment: in vitro and in vivo evidence

Osteoarthritis (OA) is one of the most common musculoskeletal degenerative diseases and contributes to heavy socioeconomic burden. Current pharmacological and conventional non-pharmacological therapies aim at relieving the symptoms like pain and disability rather than modifying the underlying disease. Surgical treatment and ultimately joint replacement arthroplasty are indicated in advanced stages of OA. Since the underlying mechanisms of OA onset and progression have not been fully elucidated yet, the development of novel therapeutics to prevent, halt, or reverse the disease is laborious. Recently, small molecules of herbal origin have been reported to show potent anti-inflammatory, anti-catabolic, and anabolic effects, implying their potential for treatment of OA. Herein, the molecular mechanisms of these small molecules, their effect on physiological or pathological signaling pathways, the advancement of the extraction methods, and their potential clinical translation based on in vitro and in vivo evidence are comprehensively reviewed.

Effects of Cryoconcentrated Blueberry Juice as Functional Ingredient for Preparation of Commercial Confectionary Hydrogels

Hydrogels can absorb and/or retain components in the interstitial spaces due to the 3D cross-linked polymer network, and thus, these matrices can be used in different engineering applications. This study focuses on the physicochemical and textural properties, as well as bioactive compounds and their antioxidant activity stability of commercial hydrogels fortified with cryoconcentrated blueberry juice (CBJ) stored for 35 days. CBJ was added to commercial hydrogels (gelatin gel (GG), aerated gelatin gel (AGG), gummy (GM), and aerated gummy (AGM)). The samples showed a total polyphenol, anthocyanin, and flavonoid content ranging from 230 to 250 mg GAE/100 g, 3.5 to 3.9 mg C3G/100 g, and 120 to 136 mg CEQ/100 g, respectively, and GG and GM showed the lowest bioactive component degradation rate, while AGM presented the highest degradation. GG and GM samples could be stored for up to 21 days without significant changes, while the results indicated ≈15 days for the AGG and AGM samples. Thereby, CBJ offers enormous possibilities to be used as a functional ingredient due to the high nutritional values, and it allows enriching different hydrogel samples, and in turn, the structures of hydrogels protected components during in vitro digestion, enhancing the bioaccessibility after the digestion process.

Effects of Metal Nanoparticles and Other Preparative Materials in the Environment on Plants: From the Perspective of Improving Secondary Metabolites

The influence of preparation material residues in wastewater and soil on plants has been paid more and more attention by researchers. Secondary metabolites play an important role in the application of plants. It was found that nanomaterials can increase the content of plant secondary metabolites in addition to their role in pharmaceutical preparations. For example, 800 mg/kg copper oxide nanoparticles (NPs) increased the content of p-coumaric acid in cucumber by 225 times. Nanoparticles can cause oxidative stress in plants, increase signal molecule, and upregulate the synthase gene expression, increasing the content of secondary metabolites. The increase of components such as polyphenols and total flavonoids may be related to oxidative stress. This paper reviews the application and mechanism of metal nanomaterials (Ag-NP, ZnO-NP, CeO₂-NP, Cds-NP, Mn-NP, CuO-NP) in promoting the synthesis of secondary metabolites from plants. In addition, the effects of some other preparative materials (cyclodextrins and immobilized molds) on plant secondary metabolites are also involved. Finally, possible future research is discussed.

The Role of Cyclodextrins in the Design and Development of Triterpene-Based Therapeutic Agents

Triterpenic compounds stand as a widely investigated class of natural compounds due to their remarkable therapeutic potential. However, their use is currently being hampered by their low solubility and, subsequently, bioavailability. In order to overcome this drawback and increase the therapeutic use of triterpenes, cyclodextrins have been introduced as water solubility enhancers; cyclodextrins are starch derivatives that possess hydrophobic internal cavities that can incorporate lipophilic molecules and exterior surfaces that can be subjected to various derivatizations in order to improve their biological behavior. This review aims to summarize the most recent achievements in terms of triterpene:cyclodextrin inclusion complexes and bioconjugates, emphasizing their practical applications including the development of new isolation and bioproduction protocols, the elucidation of their underlying mechanism of action, the optimization of triterpenes’ therapeutic effects and the development of new topical formulations.

Integrated Green Process for the Extraction of Red Grape Pomace Antioxidant Polyphenols Using Ultrasound-Assisted Pretreatment and β-Cyclodextrin

Winemaking is a process that generates a large volume of solid waste biomass, which is currently under extensive investigation as a bioresource of precious polyphenolic compounds. These substances are retrieved from vinification side streams principally by deploying solid–liquid extraction methods. In this frame, the present investigation had as objective the development of an alternative, green extraction process for polyphenols, through integration of ultrasonication as a pretreatment stage, and subsequent extraction with aqueous β-cyclodextrin. Polyphenol recovery from red grape pomace (RGP) was shown to be significantly enhanced by ultrasonication pretreatment, and the use of β-cyclodextrin effectively boosted the aqueous extraction. Under optimized conditions, established by response surface methodology, the maximum yield in total polyphenols was 57.47 mg GAE g−1 dm, at 80 °C, requiring a barrier of 10.95 kJ mol−1. The extract produced was significantly enriched in catechin and quercetin, compared to the aqueous extract, exhibiting also increased antiradical activity. These findings highlighted the value of the process developed for targeted recovery of certain polyphenols and the preparation of task-specific extracts.

Available technologies on improving the stability of polyphenols in food processing

Polyphenols are the most important phytochemicals in our diets and have received great attention due to their broad benefits for human health by suppressing oxidative stress and playing a protective role in preventing different pathologies such as cardiovascular disease, cancer, diabetes, and obesity. The stability of polyphenols depends on their environments of processing and storage, such as pH and temperature. A wide range of technologies has been developed to stabilize polyphenols during processing. This review will provide an overview of the stability of polyphenols in relation to their structure, the factors impacting the stability of polyphenols, the new products deriving from unstable polyphenols, and the effect of a series of technologies for the stabilization of polyphenols, such as chemical modification, nanotechnology, lyophilization, encapsulation, cold plasma treatment, polyphenol–protein interaction, and emulsion as a means of improving stability. Finally, the effects of cooking and storage on the stability of polyphenols were discussed.

Combinations of Piperine with Hydroxypropyl-β-Cyclodextrin as a Multifunctional System

Piperine is an alkaloid that has extensive pharmacological activity and impacts other active substances bioavailability due to inhibition of CYP450 enzymes, stimulation of amino acid transporters and P-glycoprotein inhibition. Low solubility and the associated low bioavailability of piperine limit its potential. The combination of piperine with 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) causes a significant increase in its solubility and, consequently, an increase in permeability through gastrointestinal tract membranes and the blood-brain barrier. X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR) were used to characterize interactions between piperine and HP-β-CD. The observed physicochemical changes should be combined with the process of piperine and CD system formation. Importantly, with an increase in solubility and permeability of piperine as a result of interaction with CD, it was proven to maintain its biological activity concerning the antioxidant potential (2,2-diphenyl-1-picryl-hydrazyl-hydrate assay), inhibition of enzymes essential for the inflammatory process and for neurodegenerative changes (hyaluronidase, acetylcholinesterase, butyrylcholinesterase).

Sonication-synergistic natural deep eutectic solvent as a green and efficient approach for extraction of phenolic compounds from peels of Carya cathayensis Sarg

An excellent high-efficiency natural deep eutectic solvent (NADES, ChCl-MA) was screened out and integrated with pulse-ultrasonication technique for extracting phenolic compounds from Carya cathayensis Sarg. peels (CCSPs). Single factor experiment combined with response surface methodology (RSM) using Box-Behnken design (BBD) were employed to investigate significant factors and optimize their influence on extraction of phenolic compounds. Significant synergistic effect triggered by ChCl-MA based pulse-ultrasonication over other methods used alone were proved by comparative study concerning a variety of bioactive components and antioxidant activities. The second-order kinetic model was developed and validated (R² > 0.99) to describe the extraction process and its mechanism; and second-order kinetic extraction rate constant (k), saturation concentration (C_s), and initial extraction rate (h) were calculated. FT-IR, DSC and SEM results further demonstrated synergistic effect and influence during extraction. Overall, this study provided a green and high-efficiency alternative for the recovery of various phenolics compounds from plant source by-products.

A new cyanine from oxidative coupling of chlorogenic acid with tryptophan: Assessment of the potential as red dye for food coloring

A red pigment was prepared by reaction of chlorogenic acid (CGA) with tryptophan (TRP) in air at pH 9 (37% w/w yield) and evaluated as food dye. The main component of pigment was formulated as an unusual benzochromeno[2,3-b]indole linked to a TRP unit, featuring a cyanine type chromophore (λ_max 542, 546 nm, 1% extinction coefficient of the sodium salt = 244 ± 2). The chromophore showed a minimal pH dependence and proved stable for at least 3 h at 90 °C, both at pH 3.6 or 7.0, whereas red wine anthocyanins showed a substantial (30%) and betanin a complete abatement after 1 h at the acidic pHs. An intense coloring of different food matrices was obtained with the pigment at 0.01 % w/w. No toxicity was observed up to 0.2 mg/mL on hepatic and colonic cell lines. These data make this dye a promising alternative for red coloring of food.

Red Beetroot Betalains: Perspectives on Extraction, Processing, and Potential Health Benefits

In recent years, red beetroot has received a growing interest due to its abundant source of bioactive compounds, particularly betalains. Red beetroot betalains have great potential as a functional food ingredient employed in the food and medical industry due to their diverse health-promoting effects. Betalains from red beetroot are natural pigments, which mainly include either yellow-orange betaxanthins or red-violet betacyanins. However, betalains are quite sensitive toward heat, pH, light, and oxygen, which leads to the poor stability during processing and storage. Therefore, it is necessary to comprehend the impacts of the processing approaches on betalains. In this review, the effective extraction and processing methods of betalains from red beetroot were emphatically reviewed. Furthermore, a variety of recently reported bioactivities of beetroot betalains were also summarized. The present work can provide a comprehensive review on both conventional and innovative extraction techniques, processing methods, and the stability of betalains.

Fabrication of Eco-Friendly Betanin Hybrid Materials Based on Palygorskite and Halloysite

Eco-friendly betanin/clay minerals hybrid materials with good stability were synthesized by combining with adsorption, grinding, and heating treatment using natural betanin extracted from beetroot and natural 2:1 type palygorskite or 1:1 type halloysite. After incorporation of clay minerals, the thermal stability and solvent resistance of natural betanin were obviously enhanced. Due to the difference in the structure of palygorskite and halloysite, betanin was mainly adsorbed on the outer surface of palygorskite or halloysite through hydrogen-bond interaction, but also part of them also entered into the lumen of Hal via electrostatic interaction. Compared with palygorskite, hybrid materials prepared with halloysite exhibited the better color performance, heating stability and solvent resistance due to the high loading content of betanin and shielding effect of lumen of halloysite.

Green Extracts from Coffee Pulp and Their Application in the Development of Innovative Brews

Coffee pulp, a by-product of coffee production, contains valuable compounds such as caffeine and chlorogenic acid with high antiradical activity. In this study, aqueous solutions of β-cyclodextrin (β-CD) were used as a non-conventional solvent for the extraction of targeted compounds from coffee pulp. The parameters of β-CD concentration (Cβcd), liquid-to-solid ratio (L/S), and temperature (T) were evaluated based on the antiradical activity (AAR) and the caffeine content (CCaf). The optimum operational conditions were found to be Cβcd: 9.25 mg/mL, L/S: 30 mL/g and T: 80 °C. The sensory profiles of brews prepared with coffee and coffee pulp with or without cyclodextrin were studied with quantitative descriptive analysis. The brew from the by-product had fruity, botanic, sweet and sourness sensory properties, and cyclodextrin was found to be able to affect the overall taste of the brew.

Nanoliposomal encapsulation mediated enhancement of betalain stability: Characterisation, storage stability and antioxidant activity of Basella rubra L. fruits for its applications in vegan gummy candies

Betalains are violet-red, natural food grade pigments with health benefits; however, their stability limits its use in industrial food processing. This can be overcome by placing the betalains in lecithin nanoliposomes (NLs), which causes a 76% improvement of betalain colour and stability. Extended sonication time (8 min) lowered the zeta potential (-47.5 to -40.8), and particle size (74.23 to 55.35 nm). Zeta potential, particle size, and polydispersity index of Betalain NLs (BNLs) didn't change significantly during storage (40 days). Degradation in the colour of BNLs was observed only at 121 °C (20 min) while the native juice degraded at 100 °C (20 min). BNLs were incorporated in gummy candies (GuCa) to improve its colour stability. The betalain retention, colour, texture, antioxidant activity, and shelf-life of the GuCa during storage (5 °C, 28 days) demonstrated the efficacy of BNLs to be explored as a natural colourant for the food industry.

Preparation and characterization of carnauba wax/adipic acid oleogel: A new reinforced oleogel for application in cake and beef burger

In this study, the reinforced carnauba wax (CW)-based oleogel with adipic acid (AA) was prepared and its potential for application in the cake and the beef burger was evaluated. As a result, the addition of AA in CW-based oleogels caused to form new intramolecular or intermolecular hydrogen bonding, and improve the thermal behavior and crystallinity of oleogels. Additionally, the increase of AA concentration higher than 3% of oleogel formulation significantly increased the strength of oleogels. The formulated food models (cake and beef burger) with partial substitution CW2%/AA4% oleogel as the optimized sample showed an acceptable texture profile, color, and organoleptic characteristics. Consequently, reinforced oleogel with carnauba wax/adipic acid in bakery and meat products can provide considerable promise to develop food products with lower saturated and trans-fatty acid.