Selective extraction and detection of β-agonists in swine urine for monitoring illegal use in livestock breeding

Raman spectroscopic fingerprinting for the identification and quantitative analysis of sports doping β - agonists based on gold nanopolyhedra

Beta - stimulant, that is, β - adrenergic stimulant, also known as β - agonists, is bioactive catecholamine compounds naturally produced in animals' adrenal medulla glands that induce relaxation in asthmatic airway smooth muscles upon inhalation while also temporarily boosting athletic alertness and alleviating fatigue. However, their potential for dependency poses health risks including unnoticed exacerbation leading to severe illness or fatality prompting their inclusion on WADA's prohibited substances list. Surface - enhanced Raman spectroscopy (SERS) offers a rapid, sensitive, and label - free means for identifying characteristic peaks associated with β - agonist compounds. In our investigation, the utilization of seed - mediated synthesis technique facilitated production of gold polyhedral substrates serving as highly sensitive biosensors for detecting β - agonist presence. The unique geometry of these particles generates enhanced SERS signals due to their multiple corners, resulting low detection limits (9.33 × 10-7, 6.28 × 10-7, and 6.19 × 10-7 g·mL-1 for salbutamol, clenbuterol and higenamine respectively), with promising prospects for improving overall sensitivity in β - agonists detection.

One simple and integrated nano-inspection platform for high-throughput detection of clenbuterol

To achieve high throughput detection of clenbuterol while reducing matrix interference, we developed a simple and integrated nano-inspection platform. Herein, based on the simplicity and convenience of paper chip, a multi-layer paper chip-chemiluminescence (CL) sensor was designed in the form of "48-well plate" type. The all-in-one paper chip-CL sensor has integrated the covalent organic frameworks (COFs) layer for sample matrix purification, high affinity nanobody layer for specific capture of target, and CL rapid response layer for the final determination. The signal readout was realized by the inhibitory effect of clenbuterol on the K3[Fe(CN)6] CL system. Detection of clenbuterol in pork meat was verified by measuring the CL intensity and satisfactory recoveries (85.9 %-97.3 %) were achieved. 48 samples could be simultaneously detected on one-chip in one-test, favoring the high-throughput detection. Especially, the work explored a new pathway for design of portable analytical instruments to achieve immediate on-site detection of hazards.

Porous Polymer Sorbents in Micro Solid Phase Extraction: Applications, Advantages, and Challenges

In recent years, porous polymers have gained significant attention for their application as powerful and selective sorbents in micro solid phase extraction (µSPE). In this review we explore the preparation and utilization of various porous polymer sorbents, highlighting their impact on enhancing µSPE techniques. Molecularly imprinted polymers (MIPs), graphene oxide-modified frameworks, and zeolitic imidazole frameworks (ZIFs) are among the innovative materials discussed. These innovative materials have significantly improved µSPE methods, offering enhanced extraction efficiencies, superior selectivity, and reduced solvent consumption, all of which align with the principles of green chemistry. Key findings of this review include the demonstration that MIPs exhibit excellent target specificity, making them ideal for complex matrices, while graphene oxide frameworks and ZIFs provide increased surface area and stability for diverse analytical applications. Despite these advancements, challenges remain, particularly the high cost of certain innovative materials, limited reusability, and the absence of automation in µSPE workflows. Furthermore, controlling the precise synthesis and functionalization of these sorbents continues to be a limiting factor. To address these issues, future research should focus on developing cost-effectiveness methods, the use of biopolymer or sustainable feedstocks, and scalable synthesis methods; integrating automation into µSPE; and exploring new polymeric materials with enhanced properties. Additionally, novel hybrid materials that combine the strengths of multiple sorbents offer a promising direction for future exploration. We critically analyze the advantages and limitations of each sorbent type, providing a comprehensive overview of their applications in µSPE. This paper also examines the synthesis, characterization, and unique properties of these porous polymers, emphasizing their role in advancing analytical chemistry towards more efficient and environmentally friendly practices. The need for continued development of high-performance, low-cost, and sustainable sorbents is underscored to further enhance the effectiveness of µSPE techniques.

Development and application of a physiologically-based pharmacokinetic model for ractopamine in goats

Physiologically Based Pharmacokinetic (PBPK) models can provide forecasts of the drug residues within the organism. Ractopamine (RAC) is a typical β-agonist. In this study, we developed a PBPK model for RAC in goats. The goal was to predict the distribution of the drug after multiple oral administrations. The preliminary PBPK model for RAC in goats performed well in predicting the drug's distribution in most tissues. In our sensitivity analysis, we found that the parameter of Qclu (Blood Flow Volume through Lungs) had the greatest impact on the RAC concentrations in plasma, liver, and kidney and was the most sensitive parameter. Furthermore, our study aimed to assess the withdrawal time (WT) of RAC in different tissues after RAC long-term exposure in goats. We found that the WT of RAC in the kidney was the longest, lasting for 13  days. Overall, the insights gained from this study have important implications for optimizing drug administration in goats and ensuring appropriate withdrawal times to prevent any potential risks.

Development and Application of a Selective Analytical Method for Indole Metabolites in Urine: Dietary Exposure Biomarkers for Broccoli Consumption

The identification of dietary exposure biomarkers is crucial for advancing our understanding of the health benefits of specific foods. Broccoli, a vegetable with well-known anticancer properties, contains active ingredients, such as isothiocyanates with indole side chains. Hence, indole metabolites related to broccoli consumption have the potential to serve as biomarkers of dietary exposure. In this work, we developed a new analytical method for indole metabolites in urine using a poly(deep eutectic solvents)-molecularly imprinted polymer/vinyl-functionalized graphene oxide (PDESs-MIP/VGO) in miniaturized centrifugal pipet-tip solid-phase extraction (CPT-SPE) coupled with liquid chromatography. This method integrates the strengths of PDESs-MIP/VGO, including rich adsorption interactions, high adsorption capacity, and excellent selectivity, with the simplicity and cost-effectiveness of CPT-SPE. The proposed method demonstrated low limits of quantification (1.2-2.5 ng mL-1), high accuracy (91.7-104.8%), and good precision (relative standard deviation ≤4.4%). By applying this method to analyze indole metabolites in urine, our results suggested that indole-3-carbinol and indole-3-acetonitrile have the potential to emerge as reliable dietary exposure biomarkers for broccoli intake. Furthermore, highly selective analytical methods based on molecular imprinting technology are advantageous for precise screening and analysis of dietary exposure biomarkers associated with food consumption.

Hydroxylated hierarchical flower-like COF for solid-phase extraction of adrenergic receptor agonists in milk

A new detection platform based on a hydroxylated covalent organic framework (COF) integrated with liquid chromatography-tandem mass spectrometry (LC-MS/MS) was constructed and used for detecting adrenergic receptor agonists (ARAs) residues in milk. The hydroxylated COF was prepared by polymerization of tris(4-aminophenyl)amine and 1,3,5-tris(4-formyl-3-hydroxyphenyl)benzene and applied to solid-phase extraction (SPE) of ARAs. This hydroxylated COF was featured with hierarchical flower-like morphology, easy preparation, and copious active adsorption sites. The adsorption model fittings and molecular simulation were applied to explore the potential adsorption mechanism. This detection platform was suitable for detecting four α2- and five β2-ARAs residues in milk. The linear ranges of the ARAs were from 0.25 to 50 µg·kg-1; the intra-day and the inter-day repeatability were in the range 2.9-7.9% and 2.0-10.1%, respectively. This work demonstrates this hydroxylated COF has great potential as SPE cartridge packing, and provides a new way to determine ARAs residues in milk.

Optimization, validation, and application of a liquid chromatography-tandem mass spectrometry method for the determination of 47 banned drug and related chemical residues in livestock urine using graphitized carboxyl multi-walled carbon nanotubes-based QuEChERS extraction

The establishment of an efficient method for the analysis of drug residues in animal urine facilitates the real-time monitoring of drugs used in the production of animal-derived food. A modified QuEChERS extraction-liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was established for the determination of 47 banned drug and related chemical residues in livestock urine. The sample was extracted with acetonitrile by converting the acid-base environment. The sample cleanup effects of seven solid phase extraction cartridges and two EMR-Lipid products were compared, and three materials, including graphitized carboxyl multi-walled carbon nanotubes (MWCNTs), PSA, and C18, were selected as QuEChERS adsorbents from 24 materials. All analytes showed good linearity, with correlation coefficients (R2) greater than 0.9936. Low limits of quantification could be obtained, ranging from 0.2 to 5.5 ng/mL. The average recoveries at low, medium, and high spiked levels were in the range of 70.8-114.9 %, with intra-day precision ranging from 2.4 % to 11.2 % and inter-day precision ranging from 4.5 % to 16.1 %. Swine urine and bovine urine samples collected from different farms were effectively analyzed using the developed method, and metronidazole was detected in three swine urine samples.

Magnetic solid-phase extraction based on restricted-access molecularly imprinted polymers for ultrarapid determination of ractopamine residues from food samples by capillary electrophoresis

An ultrafast, efficient, and eco-friendly method combining magnetic solid phase extraction and capillary electrophoresis with diode array detection have been developed to determine ractopamine residues in food samples. A restricted access material based on magnetic and mesoporous molecularly imprinted polymer has been properly synthesized and characterized, demonstrating excellent selectivity and high adsorbent capacity. Short-end injection capillary electrophoresis method was optimized: 75 mM triethylamine pH 7 as BGE, -20 kV, 50 mbar by hydrodynamic injection during 8 s, and capillary temperature at 25 °C; reaching ultrafast ractopamine analysis (∼0.6 min) with good peak asymmetry, and free from interfering and/or baseline noise. After sample preparation optimization, the conditions were: 1000 µL of sample at pH 6, 20 mg of adsorbent, stirring time of 120 s, 250 µL of ultrapure water as washing solvent, 1000 µL of methanol: acetic acid (7: 3, v/v) as eluent, and the adsorbent can be reused four times. In these conditions, the analytical method showed recoveries around to 100 %, linearity ranged from 9.74 to 974.0 µg kg-1, correlation coefficient (r) ≥ 0,99 in addition to adequate precision, accuracy, and robustness. After proper validation, the method was successfully applied in the analysis ractopamine residues in bovine milk and bovine and porcine muscle.

Miniaturized centrifugation accelerated pipette-tip matrix solid-phase dispersion based on poly(deep eutectic solvents) surface imprinted graphene oxide composite adsorbent for rapid extraction of anti-adipogenesis markers from Solidago decurrens Lour

Overweight and obesity are the causes of many diseases and have become global "epidemics". Research on natural active components with anti-adipogenesis effects in plants has aroused the interest of researchers. One of the most critical problems is establishing sample preparation and analytical techniques for quickly and selectively extracting and determining the active anti-adipogenesis components in complex plant matrices for developing new anti-adipogenic drugs. In this study, a new poly(deep eutectic solvents) surface imprinted graphene oxide composite (PDESs-MIP/GO) with high selectivity for phenolic acids was prepared using deep eutectic solvents as monomers and crosslinkers. A miniaturized centrifugation-accelerated pipette-tip matrix solid-phase dispersion method (CPT-MSPD) with PDESs-MIP/GO as adsorbent, coupled with high-performance liquid chromatography, was further developed for the rapid determination of anti-adipogenesis markers in Solidago decurrens Lour. (SDL). The established method was successfully used to determination anti-adipogenesis markers in SDL from different regions, with the advantages of accuracy (recoveries: 94.4 - 115.9 %, RSDs ≤ 9.8 %), speed (CPT-MSPD time: 11 min), selectivity (imprinting factor: ∼2.0), and economy (2 mg of adsorbent and 1 mL of solvents), which is in line with the current advanced principle of "3S+2A" in analytical chemistry.

A portable automated chip for simultaneous rapid point-of-care testing of multiple β-agonists

Abusive use of β-agonists as feed additives for animals and medication is detrimental to human health and food safety. Conventional assays are restricted to a single type of β-agonists detection and cannot match the multiplexing features to perform automated, high throughput, and rapid quantitative analysis in real samples. In this research, we develop a portable automated chip system (PACS) with highly integrated automated devices in conjunction with portable microfluidic chips to provide simultaneous point-of-care testing of multiple β-agonists in the field, simplifying complex manual methods, shortening assay times, and improving sensitivity. Specifically, silicon film is used as reaction substrates for immobilizing the conjugates of β-agonists to increase the sensitivity of the assay result. Then, the PACS with a chemiluminescence imaging detector is established for automatic high-throughput and sensitive detection of Clenbuterol, Ractopamine, and Salbutamol based on the indirect immunoassay. Newly developed chip with high mixing performance can improve the sensitivity of target determination. Multiplex assays were carried out using the developed system for Clenbuterol, Ractopamine, and Salbutamol with a limit of detection of 54 pg mL-1,59 pg mL-1, and 93 pg mL-1, respectively. Except for sample preparation and coating, the detection in the PACS takes less than 47 min. A satisfactory sample recovery (86.33%-108.12%) was obtained, validating the reliability and practical applicability of this PACS. Meanwhile, the PACS enables sensitive and rapid detection of multiple β-agonists in farms or markets where lacking advanced laboratory facilities.

Application of wastewater-based epidemiology to estimate the usage of beta-agonists in 31 cities in China

The illegal use of beta-agonists could cause severe problems to human health. In this study, the usage of beta-agonists in 31 cities across China was estimated using wastewater-based epidemiology (WBE). The proposed method is based on solid-phase extraction (SPE) and LC-MS/MS and was developed and validated to determine the concentration of seven beta-agonists in wastewater. A population model based on cotinine (COT), NH4-N and the flow volume was constructed to estimate the population equivalents for different wastewater treatment plants (WWTPs). Clenbuterol and ractopamine are banned in China for both animal husbandry and medical use, but were nevertheless detected in some wastewater samples at rates of 6.2 % and 4.7 %, respectively (n = 339). The WBE-based consumption of clenbuterol and ractopamine were compared with the acceptable daily intake (ADI) and the health risks were assessed by their hazard quotients (0.26-6.62 for clenbuterol and 9.27 × 10-4-0.05 for ractopamine). Salbutamol, clorprenaline and terbutaline were observed in practically all wastewater samples at concentrations of up to several ng/L, whereas the formoterol and bambuterol concentrations were below the detection limit in all samples. Salbutamol consumption (7.35 ± 4.14 mg/1000 inh/day) was highest among the examined beta-agonists and varied regionally. Beta-agonist consumption based on WBE was higher in some cities than that based on medical survey data, indicating potential illegal use. These results show that WBE can be a straightforward and supplementary method for monitoring beta-agonist usage at the population level and spatially.

A new approach of magnetic field application in miniaturized pipette-tip extraction for trace analysis of four synthetic hormones in breast milk samples

Herein, a novel homemade electrical device was designed, including two pieces of external neodymium magnets, providing a reciprocating magnetic field to introduce a magnetic-assisted dispersive pipette-tip micro solid-phase extraction. To evaluate the performance efficiency of the proposed method, a novel magnetic calcined GO/SiO₂@Co-Fe nanocube sorbent was synthesized, filled into the pipette-tip, exposed to the reciprocating magnetic field, and applied for the preconcentration of some hormone therapy drugs in human biological matrices. The effective adsorption and desorption parameters were optimized using a rotatable central composite design and one-variable-at-a-time approaches. Under the optimized conditions, the target analytes' detection limits were found to be below 0.02 ng mL^-1. Moreover, the calibration curves were linear in the range of 0.03-500.00 ng mL^-1 (R² > 0.9966), with RSDs% less than 7.8 %. Eventually, the established method was applied to extract the analytes from breast milk samples, followed by LC-ESI-MS/MS analysis.

A SERS/electrochemical dual-signal readout immunosensor using highly-ordered Au/Ag bimetallic cavity array as the substrate for simultaneous detection of three β-adrenergic agonists

A surface-enhanced Raman scattering (SERS)/electrochemical dual-signal readout immunosensor was developed for simultaneous detection of β-adrenergic agonists salbutamol (SAL), ractopamine (RAC) and phenylethanolamine A (PA). The highly-ordered gold/silver bimetallic cavity array (BMCA) was prepared by electrodepositing Au/Ag nanoparticles to the interstice of highly ordered close-packed polystyrene templates. After electrochemical and SERS characterization, the BMCA was used as the substrate for constructing SERS/electrochemical dual-signal readout immunosensor. 3,3',5,5'-tetramethylbenzidine (TMB), methylene blue (MB) and Nile blue (NB) were selected as the dual-signal reporters, and hybridization chain reaction (HCR) was used as the signal amplifier. The immunoprobe was prepared by absorption of the antibody (Ab) and constructing HCR system embedded with electro/SERS reporter on Au nanoparticles (NPs). After competitive immuno-reaction between coating antigen and analyte for limited Ab on immunoprobe, the SERS/electrochemical dual-signals on BMCA were measured for quantitatively detecting SAL, RAC and PA simultaneously. SAL, RAC and PA were detected in concentration range of 1 pg mL^-1 to 100 ng mL^-1 with LOD of 0.8, 0.4, and 1.3 pg mL^-1, respectively. The applicability of the proposed immunosensor in spiked pork liver samples was verified by the recovery of 95.0%-108.5% with RSD of 6.9%-10.7%. It was proven that the immunosensor was able to detect multiple β-adrenergic agonists with high sensitivity, specificity, accuracy and precision. The immunosensor can be used as a platform for the determination of other small molecular compounds in biological, food and environmental analytical fields.

Electromembrane extraction of clenbuterol from swine urine for monitoring illegal use in livestock

The illegal use of clenbuterol seriously endangers food safety and human health. Accurate monitoring the illegal use of clenbuterol in livestock can efficiently prevent the clenbuterol residue pork products from entering the consumer market. Thus, in this study, a simple, rapid and sensitive method for the determination of clenbuterol in swine urine was developed using electromembrane extraction combined with liquid chromatography-tandem mass spectrometry. It should be noted that the electromembrane extraction method presented many advantages of simple operation, fast mass transfer rate, good sample clean-up capability and less organic solvent consumption. The effect of important factors on the extraction efficiency of clenbuterol was investigated. Under the optimal conditions, good linearity was achieved for clenbuterol over the range of 1-1000 ng/mL (R² = 0.9996). The recoveries of clenbuterol in swine urine at three spiked levels ranged from 83.7 to 110.0% with relative standard deviation values lower than 9.7% (n = 4). Limits of detection and quantification for clenbuterol were 0.07 and 0.25 ng/mL, respectively. These results suggested that the proposed method has great potential on the extraction and determination of trace analyte in complex sample matrix for monitoring the illegal use in livestock. This article is protected by copyright. All rights reserved.

Green synthesis of phloroglucinol-urotropine porous polymer: Ingenious miniaturized solid phase extraction for efficient purification and determination of polycyclic aromatic hydrocarbons in lotus roots

Polycyclic aromatic hydrocarbons (PAHs) posed a serious threat to food safety and human health due to long-term emission. In this work, a new method was established using phloroglucinol-urotropine porous polymer (PU-PP) in a pipette tip for solid phase extraction (PT-SPE) for the first time and used prior to determination of four PAHs (phenanthrene, anthracene, fluoranthene, and pyrene) in lotus roots. Synthesis of the PU-PP adsorbent was green compared with alternatives; urotropine was used as a cross-linker and ethanol-water as the solvent. PU-PP-based PT-SPE had the advantages of low solvent consumption, good purification, practicability, stability, and low-cost. The proposed pre-purification method offered low limits of detection (0.09-0.28 ng/g) and good recoveries (84.6-114.3 %, RSDs ≤ 5.6 %) for determination of the four PAHs, which were detected at trace concentrations in samples. This new method provides an alternative for monitoring trace pollutants in aquatic plant ingredients.

Analysis of anticancer compound, indole-3-carbinol, in broccoli using a new ultrasound-assisted dispersive-filter extraction method based on poly(deep eutectic solvent)-graphene oxide nanocomposite

Indole-3-carbinol (I3C), an important anticancer compound found in broccoli, has attracted considerable attention. The rapid extraction and accurate analysis of I3C in the pharmaceutical industry in broccoli is challenging as I3C is unstable at low pH and high temperature. In this study, a rapid, accurate, and low-cost ultrasound-assisted dispersive-filter extraction (UADFE) technique based on poly(deep eutectic solvent)-graphene oxide (PDES-GO) adsorbent was developed for the isolation and analysis of I3C in broccoli for the first time. PDES-GO with multiple adsorption interactions and a fast mass transfer rate was synthesized to accelerate adsorption and desorption. UADFE was developed by combining dispersive solid-phase extraction (DSPE) and filter solid-phase extraction (FSPE) to realize rapid extraction and separation. Based on the above two strategies, the proposed PDES-GO-UADFE method coupled with high-performance liquid chromatography (HPLC) allowed the rapid (15-16 min), accurate (84.3%-96.4%), and low-cost (adsorbent: 3.00 mg) analysis of I3C in broccoli and was superior to solid-phase extraction, DSPE, and FSPE methods. The proposed method showed remarkable linearity (r=0.9998; range: 0.0840-48.0 μg/g), low limit of quantification (0.0840 μg/g), and high precision (relative standard deviation ≤5.6%). Therefore, the PDES-GO-UADFE-HPLC method shows significant potential in the field of pharmaceutical analysis for the separation and analysis of anti-cancer compounds in complex plant samples.

A miniaturized analytical method based on molecularly imprinted absorbents for selective extraction of (S)-1,1'-binaphthyl-2,2'-diamine and combinatorial screening of polymer precursors by computational simulation

Chiral resolution of binaphthylamine is often a toilful conundrum in the field of analytical chemistry and biomedicine. The work puts forward a selective, sensitive, and miniaturized analytical method based on molecularly imprinted polymers (MIPs) as adsorbent for miniaturized tip solid-phase extraction (MTSPE) in the separation of binaphthylamine enantiomer. This method combines the advantages of MIPs (high selectivity), MTSPE (low consumption), and high-performance liquid chromatography (HPLC, high sensitivity). A simple synthesis methodology of MIP (P2) was conducted through bulk polymerization with (S)-(-)-1,1'-binaphthyl-2,2'-diamine (S-DABN) as template together with methacrylic acid monomer, and ethylene glycol dimethacrylate as cross-linker in proper porogen, realizing a selective recognition and efficient enrichment for S-DABN. The method exhibited appreciable linearity (0.06-1.00 mg ml^-1 ), low quantification limit (0.056 mg ml^-1 ), good absolute recoveries (45.70%-69.29%), and high precision (relative standard deviations ≤ 3.54%), along with low consumption (0.50 ml sample solution and 25.0 mg adsorbent). Based on the density functional theory, computational simulation was used to make a preliminary prediction for rational design of MIPs and gave a reasonable elaboration involving the potential mechanism of templates interacting with functional monomers. The adsorption kinetics and thermodynamics were investigated to evaluate the recombination process of substrates. In addition, the selectivity of MIPs for S-DABN was obtained by MIP-MTSPE coupled with HPLC, which supports the feasibility of this convenient design process. The proposed method was employed for selective extraction of S-DABN and exhibited promising potential in the application of chiral analysis.

Multi-functional porous organic polymers for highly-efficient solid-phase extraction of β-agonists and β-blockers in milk

A simple, accurate, and highly sensitive analytical method was developed in this study for the determination of ten β-agonists and five β-blockers in milk. In this method, new adsorbent phosphonic acid-functionalized porous organic polymers were synthesized through a direct knitting method. The synthesis procedure of the materials and the extraction conditions (such as the composition of loading buffer and eluent) were optimized. Benefitting from the high surface area (545–804 m² g⁻¹), multiple functional framework and good porosity, the phosphonic acid-functionalized porous organic polymers showed a high adsorption rate and high adsorption capacity for β-agonists (224 mg g⁻¹ and 171 mg g⁻¹ for clenbuterol and ractopamine, respectively). The analytes were quantified by ultra-high-performance liquid chromatography coupled to high-resolution tandem mass spectrometry. It showed a good linearity (with R² ranging from 0.9950 to 0.9991 in the linear range of 3–5 orders of magnitude), with low limits of quantification ranging from 0.05 to 0.25 ng g⁻¹. The limits of detection of the method for the analytes were measured to be in the range of 0.02 to 0.1 ng g⁻¹. The recoveries of target analytes from real samples on the material were in the range of 62.4–119.4% with relative standard deviations of 0.6–12.1% (n = 4). Moreover, good reproducibility of the method was obtained with the interday RSD being lower than 11.7% (n = 5) and intraday RSD lower than 12.2% (n = 4). The proposed method was accurate, reliable and convenient for the simultaneous analysis of multiple β-agonists and β-blockers. Finally, the method was successfully applied for the analysis of such compounds in milk samples.

Novel phosphonic acid-functionalized porous organic polymers were synthesized through direct knitting method. It shows high adsorption efficiency and high adsorption capacity for multiple β-agonists and β-blockers analysis.

Beta-agonist drugs modulate the proliferation and differentiation of skeletal muscle cells in vitro

Essentially employed for the treatment of airway obstructions in humans, β-agonists are also known to have an anabolic effect in animals’ skeletal muscle. In vivo and in vitro studies have attested the increase in animal body mass and the hypertrophy of muscle cells following the administration of specific β-agonists. However, the contribution of β-agonists to C2C12 myoblasts growth remains obscure. We therefore aimed to investigate the impact of β1-and β2-agonist drugs on the proliferation and differentiation of skeletal muscle cells. Direct observations and cytotoxicity assay showed that clenbuterol, salbutamol, cimaterol and ractopamine enhanced muscle cell growth and viability during the proliferation stage. Structural examinations coupled to Western blot analysis indicated that salbutamol and cimaterol triggered a decrease in myotube formation. A better comprehension of the effect of β-agonists on myogenic regulatory genes in the muscle cells is crucial to establish a specific role of β-agonists in muscle development, growth, and regeneration.

•

Clenbuterol, salbutamol, cimaterol, and ractopamine induce molecular responses in C2C12.

•

Beta-agonists promote cell's attachment, viability, and proliferation during muscle cell proliferation stage.

•

Salbutamol and cimaterol inhibit the formation of myotubes during differentiation stage.

Recent advances in micro- and nanomaterial-based adsorbents for pipette-tip solid-phase extraction

There are a lot of review papers of sample pretreatment, but the comprehensive review on pipette-tip solid-phase extraction (PT-SPE) is lacking. This review (133 references) is mainly devoted to the development of different types of micro- and nanosorbent-based PT-SPE, including silica materials, carbon materials, organic polymers, molecularly imprinted polymers, and metal-organic frameworks. Each section mainly introduces and discusses the preparation methods, advantages and limitations of adsorbents, and their applications to environmental, biological, and food samples. This review also demonstrates the advantages of PT-SPE like convenience, speed, less organic solvent, and low cost. Finally, the future application and development trend of PT-SPE are prospected.

Selective, sensitive, and miniaturized analytical method based on molecularly imprinted graphene oxide composites for the determination of naphthalene-derived plant growth regulators in apples

This paper reports a selective, sensitive, and miniaturized analytical method based on a molecularly imprinted graphene oxide (MIP-GO) composite as adsorbent for miniaturized tip solid-phase extraction (MTSPE) to determine naphthalene-derived plant growth regulators (PGRs) in apples. The proposed method combines the advantages of MIP-GOs (high selectivity), MTSPE (low consumption), and high-performance liquid chromatography-fluorescence detection (high sensitivity). Under optimized conditions, the method exhibited appreciable linearity (2.00-200 ng/g), low detection limits (0.21-0.53 ng/g), high accuracy (absolute recoveries: 87.6-99.5%), and high precision (relative standard deviations ≤ 3.0%), along with low consumption (0.5 mL sample solution and 2.0 mg adsorbent). In addition, the adsorption performance of the MIP-GO adsorbent did not decrease over ten months, highlighting the long storage and operational lifetime of the adsorbent. The proposed method was employed for the analysis of naphthalene-derived PGR residues in apples and exhibited promising potential for application in food safety analysis.

A molecularly imprinted polymer based monolith pipette tip for solid-phase extraction of 2,4-dichlorophenoxyacetic acid in an aqueous sample

This paper presents a simple approach for fabrication of a pipette tip solid-phase extraction (PT-SPE) device, which possesses a monolith structure with low back pressure and has high selectivity to 2,4-dichlorophenoxyacetic acid (2,4-D). Pipette tips were packed with molecularly imprinted polymers (MIPs) as a selective adsorbent and high-density polyethylene (HDPE) as a co-sintering agent, and then heated to form a monolith extraction device. The key factors including the particle size and amount of packing material, and the type and volume of elution solvent, which influence PT-SPE device performance were optimized. A packing material of 40 mg/0.20 mL in a ratio of 4/6 (MIPs/HDPE) and treatment temperature of 150 °C was selected. By the determination with high-performance liquid chromatography (HPLC-SPD), the extraction device was found to have a good extraction recovery for a 2,4-D lake water sample at a low concentration (0.006 mg L-1) with an enrichment factor about 50. The proposed method provided a simple approach for the fabrication of a PT-SPE monolith device with reduced back pressure and wall effect, which are very important for improving the extraction efficiency. And the device will have promising application in the extraction of a variety of analytes in complex samples.

Selective extraction and enhanced-sensitivity detection of fluoroquinolones in swine body fluids by liquid chromatography-high resolution mass spectrometry: Application in long-term monitoring in livestock

To ensure food safety in livestock industries, developing a non-lethal and cost-effective detection method for the long-term monitoring of veterinary antibiotics in animals will be beneficial to avoid unnecessary losses. In this study, a highly-selective extraction using dispersive micro solid-phase extraction method coupled with an enhanced-sensitivity detection by pre-column dilution injection and liquid chromatography-high resolution mass spectrometry was used to determine the restricted fluoroquinolones (FQs) in swine body fluids. The proposed method showed good linear coefficients higher than 0.999, and high sensitivity with the LODs and LOQs in the range of 0.02-0.03 μg/L and 0.06-0.1 μg/L in swine body fluids, respectively. For further evaluation, the adequate recoveries (85.3-112.8%), satisfactory repeatability (intra-day and inter-day precisions of 2.1%-8.2% and 3.8%-13.7%, respectively), and acceptable matrix effect (0.92-1.12) of the FQs were achieved. It has been successfully applied for analysis of the FQs in body fluids without sacrificing animals in the future.

Facile synthesis of magnetic sulfonated covalent organic framework composites for simultaneous dispersive solid-phase extraction and determination of β-agonists and fluoroquinolones in food samples

In this work, an efficient method for the determination of β-agonists and fluoroquinolones was established, based on a mixed-mode sorbent of magnetic sulfonated covalent organic framework composites. By coupling with HPLC-MS/MS, the main factors that affect the extraction procedure were optimized. Under the optimal conditions, the proposed HPLC-MS/MS method was successfully utilized for the extraction of β-agonists and fluoroquinolones in milk and pork meat samples. The method showed good linearities (R² ≥ 0.9916), and low LOQs of 0.1-0.2 ng g^-1 for β-agonists and fluoroquinolones. The adsorption mechanism was investigated with the assistance of quantum chemistry calculation method, and it is worth noting that the sorbent relied mainly on the multiple adsorption mechanisms, including π-π stacking, hydrophobic, electrostatic attraction and hydrogen-bonding interactions. This work not only provides a simple method for the preparation of a mixed-mode sorbent, but also a routine analysis strategy for monitoring the illegal use of β-agonists and fluoroquinolones.

Role of Ionic Liquids in Composites in Analytical Sample Preparation

Ionic liquids (ILs) are a group of non-conventional salts with melting points below 100 °C. Apart from their negligible vapor pressure at room temperature, high thermal stability, and impressive solvation properties, ILs are characterized by their tunability. Given such nearly infinite combinations of cations and anions, and the easy modification of their structures, ILs with specific properties can be synthesized. These characteristics have attracted attention regarding their use as extraction phases in analytical sample preparation methods, particularly in liquid-phase extraction methods. Given the liquid nature of most common ILs, their incorporation in analytical sample preparation methods using solid sorbents requires the preparation of solid derivatives, such as polymeric ILs, or the combination of ILs with other materials to prepare solid IL-based composites. In this sense, many solid composites based on ILs have been prepared with improved features, including magnetic particles, carbonaceous materials, polymers, silica materials, and metal-organic frameworks, as additional materials forming the composites. This review aims to give an overview on the preparation and applications of IL-based composites in analytical sample preparation in the period 2017–2020, paying attention to the role of the IL material in those composites to understand the effect of the individual components in the sorbent.

Deep eutectic solvent functionalized graphene oxide composite adsorbent for miniaturized pipette-tip solid-phase extraction of toluene and xylene exposure biomarkers in urine prior to their determination with HPLC-UV

A deep eutectic solvent functionalized graphene oxide composite adsorbent (DFG) was synthesized through reversible-addition fragmentation chain-transfer polymerization. The synthesized DFG had multiple adsorption interactions after covalent modification with a deep eutectic solvent (allyltriethylammonium bromide/ethylene glycol). Adsorption isotherms and kinetics studies of DFG indicate that the adsorption of hippuric acid (HA) and methylhippuric acid (MHA) was monolayer chemical adsorption. The comparison of DFG with commercial adsorbents demonstrates that the adsorption ability of DFG was superior. This was due to the multiple adsorption interactions of DFG for the three analytes (mainly π-interaction, hydrogen bonding, electrostatic adsorption, and hydrophobic interaction). The DFG adsorbent was applied to miniaturized pipette-tip solid-phase extraction (MPT-SPE), followed by high-performance liquid chromatography (HPLC) to determine biomarkers in urine for toluene and xylene exposure. The DFG-MPT-SPE-HPLC method required only 2.00 mg of DFG as adsorbent, 0.50 mL of washing solvent, and 0.40 mL of elution solvent to achieve a wide linear range (0.200-200 μg mL^-1), high recoveries (90.9-99.1%), and high precision (RSD ≤ 6.3%). The proposed method was applied to determine HA and MHA in urine samples from occupational workers. Graphical abstract Deep eutectic solvent functionalized graphene oxide composite adsorbent for miniaturized pipette-tip solid-phase extraction of toluene and xylene exposure biomarkers in urine prior to their determination with HPLC-UV.