Dual modification of potato starch: Effects of heat-moisture and high pressure treatments on starch structure and functionalities

Dynamic/static pressure-induced copolymerization and property changes of lotus seed starch with chlorogenic acid

Pressure promotes the formation of starch-polyphenol complexes, but their classification and properties are still unclear. This study aimed to elucidate the effects of dynamic high-pressure homogenization (10-50 MPa) and static hydrostatic pressure (100-500 MPa) on the copolymerization behavior and properties of lotus seed starch (LS)-endogenous polyphenol chlorogenic acid (CA) complexes. The results showed that both pressures induced LS-CA to form stable inclusion-type complexes and easily destructible noninclusion-type complexes. Increased pressure promoted the formation of inclusion-type complexes, with dynamic pressure having a particularly strong effect. However, noninclusion-type complexes began breaking down at 20 MPa under dynamic pressure and 300 MPa under static pressure. Inclusion-type complexes primarily improve starch ordering, and noninclusion-type complexes enhance water holding capacity, but excessive proportions of either type affect pasting performance. These findings offer insights into transforming specific starch structures through small molecular components and provide a theoretical basis for controlling functional starch product processing.

Novel hydrothermal modification to alter functionality and reduce glycemic response of pea starch

Despite being an effective and clean-label method, heat-moisture treatment (HMT) is not commonly used for starch modification in industry due to the difficulty of scale-up. This study aimed to develop a novel method of using extrusion combined with high-temperature drying (EHTD) as an alternative to HMT for starch modification. Pea starch was subjected to extrusion at 37.5 % moisture level and with a low-temperature profile (≤ 65 °C), followed by immediate heating at 130 °C for 1 h. EHTD significantly damaged the granules, altered the X-ray diffraction pattern, and reduced the relative crystallinity of pea starch. Overall, EHTD-modified pea starch exhibited increased gelatinization temperatures and decreased gelatinization enthalpy change, lowered pasting viscosity and gel hardness, as well as enhanced enzymatic resistance than the native pea starch. More importantly, in a human feeding trial (n = 20 healthy participants) to monitor plasma glucose response over a period of 2 h after consuming water-boiled sample (35 g starch, dry basis), EHTD-modified pea starch exhibited 22 % reduction (p < 0.01) in plasma glucose incremental area under the curve as compared to the native counterpart. The results indicated that EHTD could be a new simple and clean-label method to produce functional and low-glycemic starch ingredients.

Application of thermally assisted high hydrostatic pressure to modify sorghum starch: multi-scale structure, techno-functional properties and digestibility

The effects of high hydrostatic pressure (HHP) (400-650 MPa) and holding temperature (25-50 °C) in thermally assisted HHP processing on multi-scale structure of starch (granule, crystalline and molecular), techno-functional properties, and digestibility of sorghum starch (SS) were evaluated. Response surface methodology has verified that the process impact on the modification of SS was dependent primarily on the pressure level. As HHP increased, processed SS progressively lost their granular structure and Maltese cross, indicating gradual structural disorder within the granules. These findings were associated with larger particles, resulting from increased swelling of the granules. The enthalpy changes of crystallite melting decreased from 22.7 (SS) to 0.1-26.9 J/g as a result of increases in pressure and temperature. Measurements of long- and short-range order of SS showed granules have not been completely gelatinized during processing. Water absorption index (1.7-5.4 g/g) and cold viscosity (52.7-94.3 cP) increased as pressure increased, against lowered gel strength (0.80-1.44 N), peak (1394-2735 cP), final (1499-3103 cP) and setback viscosities (233-1288 cP). Increased RS (27.3-35.8%) in processed SS was attributed to the amylose-lipid complex. The process did not affect RDS compared to native SS, but it decreased SDS. Combinations of HHP and temperature demonstrated the potential to produce different versions of physically modified SS suitable for a wide range of applications.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-024-06014-z.

Effects of different pretreatment methods on the degree of substitution, structure, and physicochemical properties of synthesized malic acid sweet potato starch ester

BACKGROUND

The preparation of malic acid starch ester (MSE) is mostly carried out using a high temperature method, but there are problems such as high energy consumption, long preparation time, and uneven heating. Microwave technology can be used to overcome these limitations. The semi-crystalline structure of starch granules hinders the modifier's access to the matrix, thus limiting the esterification reaction. Physical techniques can act on the interior of the starch to create a number of active sites, thereby facilitating the reaction of the starch with esterification reagents. Therefore, this study investigated the effect of starch pretreatment by microwave, heat-moisture, and ultrasonic techniques on the degree of substitution (DS), structure, and physicochemical properties of MSE synthesized by the microwave method.

RESULTS

The DS of MSE was increased after pretreatments. The modified starch obtained by different pretreatment methods did not show new characteristic peaks, while the MSE synthesized showed new absorption peaks near 1735 cm-1. The granular structure and morphology of the modified starch obtained by microwave and heat-moisture pretreatment were gelatinized and aggregated, while some of the starch particles of the modified starch obtained by ultrasonic pretreatment appeared pore-sized. The relative crystallinity and gelatinization enthalpy of the MSE were reduced, but the crystallization pattern remained as A-type.

CONCLUSION

Overall, the results suggest that various pretreatment methods can enhance the DS of MSE by disrupting the structure of starch. The findings of this study provide theoretical support for improving the DS of esterified starch. © 2024 Society of Chemical Industry.

Combined effects of high hydrostatic pressure and pulsed electric fields on quinoa starch: Analysis of microstructure, morphology, thermal, and pasting properties

The aim of this study was to evaluate the impact of non-thermal methods, using high hydrostatic pressure (HHP) and pulsed electric field (PEF), on the dual modification of quinoa starch and to analyze the microstructural, morphological, thermal, pasting, and texture properties. Starch was treated with HHP at 400 MPa for 10 min, while PEF was applied using voltages of 10 and 30 kV cm-1 for a total time of 90s. The modification techniques were effective in breaking down amylose molecules and amylopectin branches, where for the dual treatment, higher values of DP6-12 were found. The average diameter and gelatinization temperatures were elevated after HHP, thus forming clusters that require more energy for paste formation. The use of 30 kV cm-1 and 400 MPa (HP30) in starch facilitates the creation of new food products with better texture, stability and nutritional value, making them suitable for use in food emulsions and the cosmetics industry.

Effect of plasma-activated water on the supramolecular structure and techno-functional properties of starch: A review

This review discusses the changes in the multi-scale structure and functionality of starch after its hydrothermal modification using plasma-activated water (PAW). PAW contains reactive species that decrease the pH of the water and increase the oxidation-reduction potential, which promotes the oxidation and degradation of the surface of the starch granules to varying extents, depending on the botanical source and treatment conditions. In this article, we compile the information published so far on the effects of using PAW during heat-moisture and annealing treatments and discuss the results of the substitution of water with PAW on the long and short-range crystallinity, helical order, thermal behavior, functional properties, and digestibility. Additionally, we highlighted the possible application of PAW-modified starches. Finally, we provided an overview of future challenges, suggesting several potential directions to understand the mechanisms behind PAW use for developing sustainable modified starches for the food industry.

Lotus (Nelumbo nucifera G.) seed starch: Understanding the impact of physical modification sequence (ultrasonication and HMT) on properties and in vitro digestibility

Native lotus (Nelumbo nucifera G.) seed starch (LSS) was single- and dual-modified by heat-moisture treatment (HMT), ultrasonication (US), HMT followed by the US (HMT-US), and the US followed by HMT (US-HMT). The modified lotus seed starch (LSS) was evaluated for its physicochemical, pasting, thermal, and rheological properties and in vitro digestibility. All treatments decreased the swelling power (10.52-14.0 g/g), solubility (12.20-15.95 %), and amylose content (23.71-25.67 %) except for ultrasonication (17.67 g/g, 17.90 %, 29.09 %, respectively) when compared with native LSS (15.05 g/g, 16.12 %, 27.12 %, respectively). According to the rheological study, G' (1665-4004 Pa) was greater than G″ (119-308 Pa) for all LSS gel samples demonstrating their elastic character. Moreover, gelatinization enthalpy (17.56-16.05 J/g) increased in all treatments compared to native LSS (15.38 J/g). Ultrasonication treatment improved the thermal stability of LSS. The digestibility results showed that dual modification using HMT and US significantly enhanced resistant starch (RS) and reduced slowly digestible starch (SDS) in LSS. Cracks were observed on the surface of the modified LSS granules. Peak viscosity decreased in all modified starches except for ultrasonication, suggesting their resistance to shear-thinning during cooking, making them ideal weaning food components. The results obtained after different modifications in this study could be a useful ready reference to select appropriate modification treatments to produce modified LSS with desired properties depending on their end-use.

Effects of plasma-activated water combined with ultrasonic treatment of corn starch on structural, thermal, physicochemical, functional, and pasting properties

In this study, corn starch was used as the raw material, and modified starch was prepared using a method combining plasma-activated water and ultrasound treatment (PUL). This method was compared with treatments using plasma-activated water (PAW) and ultrasound (UL) alone. The structure, thermal, physicochemical, pasting, and functional properties of the native and treated starches were evaluated. The results indicated that PAW and UL treatments did not alter the shape of the starch granules but caused some surface damage. The PUL treatment increased the starch gelatinization temperature and enthalpy (from 11.22 J/g to 13.13 J/g), as well as its relative crystallinity (increased by 0.51 %), gel hardness (increased by 16.19 %) compared to untreated starch, without inducing a crystalline transition. The PUL treatment resulted in a whitening of the samples. The dual treatment enhanced the thermal stability of the starch paste, which can be attributed to the synergistic effect between PAW and ultrasound (PAW can modify the starch structure at a molecular level, while ultrasound can further disrupt the granule weak crystalline structures, leading to improved thermal properties). Furthermore, FTIR results suggested significant changes in the functional groups related to the water-binding capacity of starch, and the order of the double-helical structure was disrupted. The findings of this study suggest that PUL treatment is a promising new green modification technique for improving the starch structure and enhancing starch properties. However, further research is needed to tailor the approach based on the specific properties of the raw material.

A Comprehensive Review on Starch-Based Hydrogels: From Tradition to Innovation, Opportunities, and Drawbacks

Natural hydrogels based on renewable and inexpensive sources, such as starch, represent an interesting group of biopolymeric materials with a growing range of applications in the biomedical, cosmeceutical, and food sectors. Starch-based hydrogels have traditionally been produced using different processes based on chemical or physical methods. However, the long processing times, high energy consumption, and safety issues related to the synthesis of these materials, mostly causing severe environmental damage, have been identified as the main limitations for their further exploitation. Therefore, the main scientific challenge for research groups is the development of reliable and sustainable processing methods to reduce the environmental footprint, as well as investigating new low-cost sources of starches and individuating appropriate formulations to produce stable hydrogel-based products. In the last decade, the possibility of physically modifying natural polysaccharides, such as starches, using green or sustainable processing methods has mostly been based on nonthermal technologies including high-pressure processing (HPP). It has been demonstrated that the latter exerts an important role in improving the physicochemical and techno-functional properties of starches. However, as for surveys in the literature, research activities have been devoted to understanding the effects of physical pre-treatments via high-pressure processing (HPP) on starch structural modifications, more so than elucidating its role and capacity for the rapid formation of stable and highly structured starch-based hydrogels with promising functionality and stability, utilizing more sustainable and eco-friendly processing conditions. Therefore, the present review addresses the recent advancements in knowledge on the production of sustainable starch-based hydrogels utilizing HPP as an innovative and clean-label preparation method. Additionally, this manuscript has the ambition to give an updated overview of starch-based hydrogels considering the different types of structures available, and the recent applications are proposed as well to critically analyze the main perspectives and technological challenges for the future exploitation of these novel structures.

Heat-moisture and acid treatments can increase levels of resistant starch in arrowroot starch without adversely affecting its prebiotic activity in human colon microbiota

Carbohydrates are an important macronutrient whose processing and digestive fate can have numerous beneficial or adverse effects on consumer health. This study investigated the impact of heat-moisture treatments (HMT) and citric acid treatments (CAT) on arrowroot starch (ARS) with a focus on its physicochemical properties, digestibility, and influence on gut microbiota. The results revealed that HMT and CAT did not alter the colloidal characteristics of ARS but significantly affected the balance between amorphous and crystalline regions. Changes in thermal properties, morphology, and particle size were also observed. These can influence ARS shelf life and functional properties in various food applications. Furthermore, certain treatments in both processing methods increased the resistant starch (RS) content of ARS, with HMT for 16 hours at 80 °C and CAT with 0.6 M citric acid, resulting in the most pronounced effects. These changes coincided with reductions in rapidly digestible starch (RDS) levels and improvements in the ratio of slowly digestible starch (SDS) to RDS, which could potentially improve glycemic control. This study also examined the impact of processed ARS on colonic microbiota composition. It found that ARS-derived RS formed under HMT and CAT did not negatively affect the prebiotic potential of the RS fraction. Both treatments were associated with lowering the Firmicutes to Bacteroidetes ratio (F/B), a marker of gut health, and decreasing the relative abundance of Proteobacteria, microbes associated with adverse health effects. Additionally, CAT-derived RS showed a significant increase in the relative abundance of Roseburia, a beneficial gut bacterium. In conclusion, processing ARS through HMT and CAT techniques has the potential for enhancing its RS content, improving its glycemic impact, and positively influencing the gut microbiota composition, potentially contributing to gut health and metabolic well-being.

Effect of osmotic pressure and simultaneous heat-moisture phosphorylation treatments on the physicochemical properties of mung bean, water caltrop, and corn starches

This study aimed to investigate the physicochemical properties of modified starch prepared through the simultaneous heat-moisture and phosphorylation treatment (HMPT) and osmotic pressure treatment (OPT) for water caltrop starch (WCS), mung bean starch (MBS), and amylose-rich corn starch (CS) for different time periods. Furthermore, variations in starch content [amylose and resistant starch (RS)], swelling powder (SP), water solubility index (WSI), crystallinity, thermal properties, gelatinization enthalpy (ΔH), and glycemic index (GI) were examined. This study demonstrates that neither HMPT nor OPT resulted in a significant increase in the resistant starch (RS) content, whereas all samples succeeded in heat-treating at 105 °C for another 10 min exhibited a significant increase in RS content compared to their native counterparts. Moreover, the gelatinization temperatures of the three starches increased (To, Tp, and Tc), whereas their gelatinization enthalpy (ΔH) and pasting viscosity decreased. In particular, the GI of all three modified starches subjected to HMPT or OPT showed a decreasing trend with modification time, with OPT exhibiting the best effect. Therefore, appropriate modification through HMPT or OPT is a viable approach to develop MBS, WCS, and CS as processed foods with low GI requirements, which exceptionally may be suitable for canned foods, noodles, and bakery products.

Combined effect of heat moisture and ultrasound treatment on the physicochemical, thermal and structural properties of new variety of purple rice starch

The advantages of physically modifying starch are evident: minimal environmental impact, no by-products, and straightforward control. The impact of dual modification on starch properties is contingent upon modification conditions and starch type. Herein, we subjected purple rice starch (PRS) to heat-moisture treatment (HMT, 110 °C, 4 h) with varying moisture content, ultrasound treatment (UT, 50 Hz, 30 min) with different ultrasonic power, and a combination of HMT and UT. Our findings reveal that UT following HMT dispersed starch granules initially aggregated by HMT and resulted in a rougher granule surface. Rheological analysis showcased a synergistic effect of HMT and UT, enhancing the fluidity of PRS and reinforcing its resistance to deformation in paste form. The absorbance ratio R1047/1015 indicates that increased moisture content during HMT and high ultrasound power for UT reduced the short-range order degree (1.69). However, the combined HMT-UT exhibited an increased R1047/1015 (1.38-1.64) compared to HMT alone (1.29-1.45), likely due to short-chain rearrangement. Notably, the A-type structure of PRS remained unaltered, but overall crystallinity significantly decreased (23.01 %-28.56 %), consistent with DSC results. In summary, physical modifications exerted significant effects on PRS, shedding light on the mechanisms governing the transformation of structural properties during HMT-UT.

Evaluation of dual modification by high hydrostatic pressure and annealing on the physicochemical properties of bean starch

This study investigated the physical modifications by high hydrostatic pressure (HHP) at 600 MPa for 30 min/30 °C, annealing (AN) at 50 °C/24 h and the combination of both (HHP + AN and AN + HHP) applied to yellow bean starch to verify changes in morphology, X-ray diffraction, molecular order, thermal properties and pasting properties of native (NS) and modified starches. Morphological analysis showed loss of sphericity and increase in diameter with the appearance of pores on the surface after application of treatments. The AN starch showed lower values of syneresis, degree of double helix (DD), order (DO), and viscosity of the paste obtained by RVA. It exhibited a Vh-type classification with the appearance of the amylose-lipid complex. However, the gelatinization temperatures, as well as the enthalpy of gelatinization, were significantly higher. On the other hand, the starch treated with HHP showed a higher Setback (SB) value. The greatest modifications were found for the starches subjected to the combined treatments (AN + HHP) and (HHP + AN), where the order of the treatments was significant for the morpho-structural changes of yellow bean starch. According to the micrographs, the surface aspect was altered, with AN + HHP showing greater irregularities and flat yet irregular faces, as well as a larger granule diameter (147.05). The X-ray diffractogram showed a reduction in crystallinity from 28.14 % (NS) to 18.09 % (AN + HHP) and classified the starch as type "A". The double modification (HHP + AN and AN + HHP) reduced the gelatinization temperature and the enthalpy of gelatinization but had no effect on the bands of the FT-IR spectrum. There was only a reduction in the degree of order and the double helix. Finally, the treatment with AN + HHP is more effective as the gelatinization with AN facilitates the application of HHP. Both methods used are classified as physical (thermal and non-thermal), aiming to minimize environmental impacts and achieve faster and safer morpho-structural modification without leaving chemical residues in the products.

Effect of microwave followed by cooling on structural and digestive properties of pinhão starch

To increase its resistant content, native pinhão starch was modified using a microwave (300 W, 90 s) and subsequently cooled at 4 °C for 4, 8, 16, 24, and 72 h. The results demonstrated that all starches exhibited a crystalline structure of type C, with decreased crystallinity after modification. In the modified samples, the ratio of peaks 1047/1022 cm-1 and 995/1022 cm-1, as identified by FTIR, indicated a reduction in the crystalline region and damage to the double helix structure of starch granules. DSC analysis revealed that modified starches had lower gelatinization temperature range values due to the presence of more homogeneous crystals. Rheological analyses showed that starch suspensions obtained exhibited pseudoplastic fluid behavior and gel-like viscoelastic structure formation, with higher storage moduli in samples with longer cooling times. The microwave-modified starch, cooled for 72 h, exhibited higher digestion resistance, resulting in a 43.6 % increase in resistant starch content and a 26.1 % decrease in rapidly digestible starch compared to native starch. The results highlight that the modification of native pinhão starch using a microwave, followed by cooling at 4 °C for 72 h, presents a promising method for increasing the resistant starch content.

Impact of plasma-activated water on the supramolecular structure and functionality of small and large starch granules

Hydrothermal (HMT) and water agitation (WA) treatments using plasma-activated water (PAW) were employed as sustainable methods to modify the molecular and functional performance of small (rice) and large (potato) starch granules. HMT-PAW and WA-PAW treatments resulted in etched and damaged granular surfaces that rearranged the long and short-range crystallinity of the modified starches. Both treatments seemed to predominantly occur in the amorphous region of the rice starch and the crystalline regions of the potato starch, changing the crystallinity values from 22.9 and 14.8 % to 31.8 and 10.4 %, respectively. Thus, the level of the arrangement of chains reached after PAW treatment decreased the ability of rice starch granules to swell (16 to 9 %) and leach out starch molecules from the granules (4.5 to 1.3 %), decreasing the viscosity and pasting profiles as indicated by n and k values. Opposite behavior was observed in the modified potato starches since starch components leached out to a higher extent (1.7 to 5.4 %). The results showed that HMT and WA treatments using PAW are feasible eco-friendly methods for modifying starch granules without chemical reagents. These modified starches could be suitable as functional ingredients or biopolymeric matrices for the food and packaging industry.

Comprehensive review on single and dual modification of starch: Methods, properties and applications

Starch is a natural, renewable, affordable, and easily available polymer used as gelling agents, thickeners, binders, and potential raw materials in various food products. Due to these techno-functional properties of starch, food and non-food industries are showing interest in developing starch-based food products such as films, hydrogels, starch nanoparticles, and many more. However, the application of native starch is limited due to its shortcomings. To overcome these problems, modification of starch is necessary. Various single and dual modification processes are used to improve techno-functional, morphological, and microstructural properties, film-forming capacity, and resistant starch. This review paper provides a comprehensive and critical understanding of physical, chemical, enzymatic, and dual modifications (combination of any two single modifications), the effects of parameters on modification, and their applications. The sequence of modification plays a key role in the dual modification process. All single modification methods modify the physicochemical properties, crystallinity, and emulsion properties, but some shortcomings such as lower thermal, acidic, and shear stability limit their application in industries. Dual modification has been introduced to overcome these limitations and maximize the effectiveness of single modification.

Synergistic modification of ultrasound and bamboo leaf flavonoid on the rheological properties, multi-scale structure, and in vitro digestibility of pea starch

In this study, the effect of ultrasonic treatment (UT), bamboo leaf flavonoid (BLF), ultrasonic treatment prior to bamboo leaf flavonoid (UT-BLF), and bamboo leaf flavonoid prior to the ultrasonic treatment (BLF-UT) on the rheological properties, multi-scale structure, and digestibility of pea starch (PS) were investigated. The morphology and crystal structure of starch granules were destroyed by UT, thereby promoting starch retrogradation and digestion. The binding between BLF and starch through hydrophobic interactions and hydrogen bonds inhibited the interaction between starch molecular chains and impaired their double helix structure, thus effectively retarding starch retrogradation. The anti-digestibility of starch was enhanced after synergistic treatment. Compared with single treatment, synergistic treatment increased the ordered structure and gelatinization enthalpy of starch. In comparison with the UT-BLF group, the viscoelastic and thermal stability of BLF-UT group were improved with the increase in ordered structure. This study could provide valuable information for PS modification.

Effects of suspension media on high pressure processing of starches with different crystalline structures

High pressure processing (HPP) is a starch modification method generally conducted in water, and little is known about the pressure-induced changes in different media. This study investigated the effects of water versus sodium sulfate on corn, potato, and pea starches subjected to HPP at 690 MPa. HPP in both media reduced gelatinization enthalpy and crystallinity for all starches. HPP in sodium sulfate promoted the transition of common corn and potato starches to C-type crystallites. HPP starches in sodium sulfate generally displayed lower pasting temperatures, higher peak viscosities, and greater breakdowns than in water. Alpha-amylase susceptibility increased for all HPP starches and was generally lower in sodium sulfate than in water. HPP common corn and potato starchs in sodium sulfate displayed a porous structure after α-amylase digestion. The competition of sodium sulfate for water molecules between starch helices induced variations in the properties of HPP starches with different crystalline structures.

A review of starch swelling behavior: Its mechanism, determination methods, influencing factors, and influence on food quality

Swelling behavior involves the process of starch granules absorbing enough water to swell and increase the viscosity of starch suspension under hydrothermal conditions, making it one of the important aspects in starch research. The changes that starch granules undergo during the swelling process are important factors in predicting their functional properties in food processing. However, the factors that affect starch swelling and how swelling, in turn, affects the texture and digestion characteristics of starch-based foods have not been systematically summarized. Compared to its long chains, the short chains of amylose easily interact with amylopectin chains to inhibit starch swelling. Generally, reducing the swelling of starch could increase the strength of the gel while limiting the accessibility of digestive enzymes to starch chains, resulting in a reduction in starch digestibility. This article aims to conduct a comprehensive review of the mechanism of starch swelling, its influencing factors, and the relationship between swelling and the pasting, gelling, and digestion characteristics of starch. The role of starch swelling in the edible quality and nutritional characteristics of starch-based foods is also discussed, and future research directions for starch swelling are proposed.

The effect of non-thermal physical modification on the structure, properties and chemical activity of starch: A review

Non-thermal physical treatments has obvious advantages in regulating the structure and properties of starch compared with chemical treatment. Hance, this article summarized and compared the effects of three kinds of non-thermal physical treatments including grinding and ball milling, high hydrostatic pressure and ultrasonic on the structure, properties and chemical activity of starches from different plants. The potential applications of non-thermal physical modified starch were introduced. And strategies to solve the problems in the current research were put forward. It is found that although starch has a dense structure, the starch granules could be deformed under three kinds of non-thermal physical treatments, which could damage the granule morphology, microstructure, and crystal structure of starch, reduce particle size, increase solubility and swelling power, and promote starch gelatinization. Three kinds of non-thermal physical treated starch could be used as flocculant thickener, starch based edible films and fat substitutes. Non-thermal physical treatments caused the structure of starch to undergo three stages, which were similar to mechanochemical effects. When starch was in the stress stage and the transition stage from aggregation to agglomeration, its active sites significantly increase and move inward, ultimately leading to a significant increase in the chemical activity of starch.

Starch Modification with Molecular Transformation, Physicochemical Characteristics, and Industrial Usability: A State-of-the-Art Review

Starch is a readily available and abundant source of biological raw materials and is widely used in the food, medical, and textile industries. However, native starch with insufficient functionality limits its utilization in the above applications; therefore, it is modified through various physical, chemical, enzymatic, genetic and multiple modifications. This review summarized the relationship between structural changes and functional properties of starch subjected to different modified methods, including hydrothermal treatment, microwave, pre-gelatinization, ball milling, ultrasonication, radiation, high hydrostatic pressure, supercritical CO₂, oxidation, etherification, esterification, acid hydrolysis, enzymatic modification, genetic modification, and their combined modifications. A better understanding of these features has the potential to lead to starch-based products with targeted structures and optimized properties for specific applications.

Effect of low temperature extrusion-modified potato starch addition on properties of whole wheat dough and texture of whole wheat youtiao

In this study, low temperature extrusion-modified potato starch (MPS) was added to improve properties of whole wheat dough and textural quality of resulted youtiao. Extrusion temperature (60, 90 ℃) and barrel moisture content (30, 42 and 54%) were set as test variables. The results suggested that the low temperature extrusion processing caused moderate gelatinization and improved gel-forming properties of potato starch. MPS addition decreased the setback by up to 46%, and enhanced the viscoelasticity of whole wheat dough significantly. Compared to the whole wheat-based youtiao, the addition of 10% MPS decreased the hardness by up to 72%, and increased the springiness and specific volume by 32% and 22%, respectively. The addition of MPS prepared at lower extrusion temperature (60 ℃) and moderate moisture content (42%) resulted in the optimum textural qualities of whole wheat youtiao. This study will help better understand the role of MPS in whole wheat-based food product.

The effects of high-pressure treatment on the structure, physicochemical properties and digestive property of starch - A review

High hydrostatic pressure (HHP) is a novel technology used in the food-processing industry. Starch is an important renewable natural resource. The applications of starch are determined by its properties, which in turn are determined by its structure. In this study, the effects of HHP treatment on starch structure (granular structure, crystalline structure, molecular structure, and molecular conformation) and properties (pasting, retrogradation, thermal, digestive, rheological, swelling, solubility, water absorption, and oil absorption properties) are summarised. Additionally, the mechanism of HHP-induced gelatinisation is discussed. First, the strong hydration ability of starch molecules under high pressure facilitates the binding of water molecules to starch molecules via hydrogen bonding. These bound water molecules may block the channels inside the starch granules, leading to the formation of a sealed space. Finally, the granules disintegrate because of the intra/extra pressure difference. This study provides a reference for the application of HHP to starch processing and modification.

Synergistic effect of endogenous gluten and oleic acid on wheat starch digestion by forming ordered starch-fatty acid-protein complexes during thermal processing

The aim of this study was to understand the potential of endogenous gluten inhibiting the digestibility in vitro of wheat starch (WS) in starch-fatty acid-protein system. Therefore, the influences of gluten and whey protein isolate (WPI) on the properties, multi-scale structure and in vitro digestibility of WS in WS-oleic acid (OA)-protein system were compared. The results of digestibility in vitro indicated that the ternary system of starch-fatty acid-protein showed higher resistant starch (RS) content as well as lower rapidly digestible starch (RDS) content than the binary system of WS-OA, demonstrating protein decreased WS digestion of WS-OA system. The results of pasting properties showed that gluten and WPI both increased the viscosities of WS-OA system during the cooling period due to the formation of WS-OA-protein ternary complex. The results of swelling power and solubility analysis showed that gluten and WPI both decreased the swelling power and solubility of WS-OA binary system. Laser Confocal Raman and X-ray diffraction (XRD) studies indicated that gluten and WPI both increased the ordered degree of WS-OA binary system by decreasing the full width at half maximum (FWHM) of the peak at 480 cm^-1 and increasing crystallinity degree. Strikingly, compared with WPI, gluten had greater effects on the digestibility in vitro, pasting properties and ordered degree of WS in WS-OA-protein system. Therefore, gluten as an endogenous protein has the potential application in reduction the enzymatic digestibility of WS by regulating the reassembly of starch and fatty acid during thermal processing.

A study on the structural, physicochemical, rheological and thermal properties of high hydrostatic pressurized pearl millet starch

Starch in native form has limited application due to functional and physicochemical characteristics. To overcome these limitations, starch can be modified by non-thermal technologies such as high hydrostatic pressure (HHP). This study investigates high-pressure-induced gelatinization and the effect of this process on the structural, functional, morphological, pasting, thermal, physical and rheological properties of millet starch. The suspension of millet starch and water was pressurized at 200, 400 and 600 MPa for 10, 20 and 30 min to modify the starch in terms of structure, morphology, some physicochemical and rheological properties. Swelling strength and starch solubility decreased as a result of treatment with HHP. All treatments caused to increase in water holding capacity of the starch (from 0.66 % for native starch to 2.19 % for 600 MPa-30 min). Thermal analysis showed a decrease in gelatinization temperature and enthalpy of gelatinization and the pasting properties showed a decrease in the peak viscosity after HHP treatment. In addition, HHP treatment caused to increase in the hydration ability of starch by creating porosity and gaps in the granule surface and increasing the specific surface area. HHP application resulted in an increase in the peak time and pasting temperature and a decrease in breakdown and peak viscosities, final viscosity and setback viscosity in comparison with native starch of millet. The starch sample treated with 600 MPa for 30 min had the lowest syneresis and retrogradation ability. Increasing pressure and the time led to an increase in the elastic nature of the starch samples. According to the results, it is possible to increase usage area of starches in the food industry by improving its technological with HHP. This green physical technology can influence the quality parameters of starch, which can provide benefits for product machining and economic purposes.

Physical, Chemical and Biochemical Modification Approaches of Potato (Peel) Constituents for Bio-Based Food Packaging Concepts: A Review

Potatoes are grown in large quantities and are mainly used as food or animal feed. Potato processing generates a large amount of side streams, which are currently low value by-products of the potato processing industry. The utilization of the potato peel side stream and other potato residues is also becoming increasingly important from a sustainability point of view. Individual constituents of potato peel or complete potato tubers can for instance be used for application in other products such as bio-based food packaging. Prior using constituents for specific applications, their properties and characteristics need to be known and understood. This article extensively reviews the scientific literature about physical, chemical, and biochemical modification of potato constituents. Besides short explanations about the modification techniques, extensive summaries of the results from scientific articles are outlined focusing on the main constituents of potatoes, namely potato starch and potato protein. The effects of the different modification techniques are qualitatively interpreted in tables to obtain a condensed overview about the influence of different modification techniques on the potato constituents. Overall, this article provides an up-to-date and comprehensive overview of the possibilities and implications of modifying potato components for potential further valorization in, e.g., bio-based food packaging.

Influence of ultrasound and microwave treatments on the structural and thermal properties of normal maize starch and potato starch: A comparative study

The effects of ultrasound and microwave on the physicochemical properties of normal maize and potato starches were compared. The cavitation effect of ultrasound loosened the internal space and destroyed the structure of starch granules, increased the damaged starch content, which was consistent with the decrease in relative crystallinity and the number and brightness of Maltese crosses, and the increase in D(0.5) and D(4,3) values. Microwave vibrated the molecules inside the granules and generated heat to destroy the structure of starch. The content of damaged starch was significantly lower in microwave-treated starch compared with ultrasound-treated starch. Microwave treatment promoted the formation of amylose-lipid complex, with the larger peak area at 20°(2θ) than that of the ultrasound-treated starch. The type of starch and the treatment sequence showed a significant effect. The results might help understand the mechanism of ultrasound and microwave treatments influencing the structural properties of starches.

Rheological Properties of Wheat Flour Modified by Plasma-Activated Water and Heat Moisture Treatment and in vitro Digestibility of Steamed Bread

The study investigated the effects of plasma-activated water (PAW) and heat moisture treatment (HMT) on the rheological properties of wheat flour and the in vitro digestibility of steamed bread partially replaced by the modified wheat flour. After HMT, the gelatinization temperature of wheat flour increased and the gelatinization enthalpy reduced. The solubility and swelling power of wheat flour increased after the heat-moisture treatment. The solubility of modified flour after PAW-HMT treatment was lower than that of distilled water (DW)-HMT at the same temperature. The wheat flour with HMT had higher storage modulus (G') and loss modulus (G"), and had better ductility and deformability. Common wheat flour was partially replaced by modified flour to make steamed bread. The results indicated that the volume, height, diameter and specific volume of steamed bread were significantly decreased with the addition of HMT flour. However, the hardness, viscosity and chewiness increased significantly. The resistant starch content of steamed bread with the modified wheat flour increased. The results provide new insights for the development of new functional steamed bread.

An Insight into the Gelatinization Properties Influencing the Modified Starches Used in Food Industry: A review

Native starch is subjected to various forms of modification to improve its structural, mechanical, and thermal properties for wider applications in the food industry. Physical, chemical, and dual modifications have a substantial effect on the gelatinization properties of starch. Consequently, this review explores and compares the different methods of starch modification applicable in the food industry and their effect on the gelatinization properties such as onset temperature (To), peak gelatinization temperature (Tp), end set temperature (Tc), and gelatinization enthalpy (ΔH), studied using differential scanning calorimetry (DSC). Chemical modifications including acetylation and acid hydrolysis decrease the gelatinization temperature of starch whereas cross-linking and oxidation result in increased gelatinization temperatures. Common physical modifications such as heat moisture treatment and annealing also increase the gelatinization temperature. The gelatinization properties of modified starch can be applied for the improvement of food products such as ready-to-eat, easily heated or frozen food, or food products with longer shelf life.

Starch isolation from turmeric dye extraction residue and its application in active film production

In this study, we have isolated starch from turmeric dye extraction residue by steeping in acid medium (AS), steeping in water (WS), or steeping in alkaline medium (KS) and assessed the filmogenic capacity of the resulting starches. We have also characterized the chemical composition, morphology, swelling power, solubility, crystallinity, and active properties of the AS, WS, and KS starches and investigated the mechanical, functional, antioxidant, and antimicrobial properties of the corresponding films. The AS and KS starches showed lower apparent amylose content and higher purity, relative crystallinity, swelling power, and solubility than the WS starch. All the starches retained phenolic compounds and curcuminoids; their phenolic and curcuminoid contents were higher than the contents in the residue, especially in the case of the AS starch, which yielded films with the best antioxidant and antimicrobial activities. The AS and KS starches yielded films that were more resistant at break, less soluble in water, and less hydrophilic than the film obtained from the WS starch. Thus, submitting turmeric dye extraction residue to AS in ascorbic acid yielded a starch that resulted in films with good mechanical properties and better antioxidant and antimicrobial properties, to ensure safe and prolonged food shelf life.