Green and simple extraction of free seleno-amino acids from powdered and lyophilized milk samples with natural deep eutectic solvents

Extraction of Biomolecules from Coffee and Cocoa Agroindustry Byproducts Using Alternative Solvents

Coffee and cocoa agribusinesses generate large volumes of byproducts, including coffee husk, coffee pulp, parchment skin, silver skin, and cocoa bean shell. Despite the rich composition of these materials, studies on biomolecule extraction with green solvents are still scarce, and further research is needed. Extraction methods using alternative solvents to obtain biomolecules must be developed to enhance the byproducts' value and align with biorefinery concepts. This article reviews the compositions of coffee and cocoa byproducts, their potential applications, and biomolecule extraction methods, focusing on alternative solvents. The extraction methods currently studied include microwave-assisted, ultrasound-assisted, pulsed electric field-assisted, supercritical fluid, and pressurized liquid extraction. At the same time, the alternative solvents encompass the biobased ones, supercritical fluids, supramolecular, ionic liquids, and eutectic solvents. Considering the biomolecule caffeine, using alternative solvents such as pressurized ethanol, supercritical carbon dioxide, ionic liquids, and supramolecular solvents resulted in extraction yields of 2.5 to 3.3, 4.7, 5.1, and 1.1 times higher than conventional solvents. Similarly, natural deep eutectic solvents led to a chlorogenic acid extraction yield 84 times higher than water. The results of this research provide a basis for the development of environmentally friendly and efficient biomolecule extraction methods, improving the utilization of agricultural waste.

Deep eutectic solvents: Preparation, properties, and food applications

Deep Eutectic Solvents (DESs) emerge as innovative 21st-century solvents, supplanting traditional ones like ethanol and n-hexane. Renowned for their non-toxic, biodegradable, and water-miscible nature with reduced volatility, DESs are mostly synthesized through heating and stirring method. Physicochemical properties such as polarity, viscosity, density and surface tension of DESs influenced their application. This review paper gives the overview of application of eco-benign DESs in fruits, vegetables, cereals, pulses, spices, herbs, plantation crops, oil seed crops, medicinal and aromatic plants, seaweed, and milk for the extraction of bioactive compounds. Also, it gives insight of determination of pesticides, insecticides, hazardous and toxic compounds, removal of heavy metals, detection of illegal milk additive, purification of antibiotics and preparation of packaging film. Methodologies for separating bioactive compounds from DESs extracts are systematically examined. Further, safety regulations of DESs are briefly discussed and reviewed literature reveals prevalent utilization of DES-based bioactive compound rich extracts in cosmetics, indicating untapped potential of their application in the food industry.

Utilization of natural deep eutectic solvents and ultrasound-assisted extraction as green extraction technique for the recovery of bioactive compounds from date palm (Phoenix dactylifera L.) seeds: An investigation into optimization of process parameters

The green extraction of bioactive compounds from date seeds was investigated using seven natural deep eutectic solvents (NADES) coupled with ultrasound-assisted extraction (UAE). The seven NADESs mainly consisted of choline chloride as hydrogen bond acceptors (HBA) and four sugars, two organic acids, and one polyalcohol as hydrogen bond donors (HBD) were utilized in this study. When the extraction efficiency of the NADESs was compared to that of the conventional solvents, all the NADESs showed superior bioactive compounds recovery efficacy. The lactic acid-based NADES had the highest extraction efficiency and was further optimized using the response surface method and Box-Behnken design. A four-factors including extraction time (10, 20, and 30 min), ultrasound amplitude (70, 80, and 90 %), % NADES content (30 %, 50 %, and 70 %) and solid-to-solvent ratio (1:30, 1.5:30, and 2:30 g/ml) each at three levels (-1, 0 and 1) using Box-Behnken design was applied. The % NADES content and the solid-to-solvent ratio were the major factors influencing the extraction efficiency of the total phenolic content (TPC) and the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity. The optimum extraction conditions included an extraction time of 15 min, ultrasound amplitude of 90 %, % NADES content of 70 % and solid-to-liquid ratio of 1:30 g/ml. The experimental values for TPC and DPPH at optimum extraction conditions were 145.54 ± 1.54 (mg GAE/g powder) and 719.19 ± 2.09 (mmol TE/g powder), respectively. The major phenolic compounds observed in the date seeds extracted using ChCl-LA were 3,4-dihydroxybenzoic acid, catechin and caffeic acid. This study reveals that the extraction of date seeds with NADES in combination with UAE technique was able to recover significantly higher amounts of phenolic compounds which could find useful applications in the food, pharmaceutical, and cosmetics industries.

A New Food Ingredient Rich in Bioaccessible (Poly)Phenols (and Glucosinolates) Obtained from Stabilized Broccoli Stalks

Broccoli (Brassica oleracea var. italica) stalks account for up to 35% of the broccoli harvest remains with the concomitant generation of unused waste that needs recovery to contribute to the sustainability of the system. However, due to its phytochemical composition, rich in bioactive (poly)phenols and glucosinolates, as well as other nutrients, the development of valorization alternatives as a source of functional ingredients must be considered. In this situation, the present work aims to develop/obtain a new ingredient rich in bioactive compounds from broccoli, stabilizing them and reducing their degradation to further guarantee a high bioaccessibility, which has also been studied. The phytochemical profile of lyophilized and thermally treated (low-temperature and descending gradient temperature treatments), together with the digested materials (simulated static in vitro digestion) were analysed by HPLC-PDA-ESI-MSn and UHPLC-3Q-MS/MS. Broccoli stalks and co-products were featured by containing phenolic compounds (mainly hydroxycinnamic acid derivatives and glycosylated flavonols) and glucosinolates. The highest content of organosulfur compounds corresponding to the cores of the broccoli stalks treated by applying a drying descendant temperature gradient (aliphatic 18.05 g/kg dw and indolic 1.61 g/kg dw, on average, while the breakdown products were more abundant in the bark ongoing low temperature drying 11.29 g/kg dw, on average). On the other hand, for phenolics, feruloylquinic, and sinapoylquinic acid derivatives of complete broccoli stalk and bark, were more abundant when applying low-temperature drying (14.48 and 28.22 g/kg dw, on average, respectively), while higher concentrations were found in the core treated with decreasing temperature gradients (9.99 and 26.26 g/kg dw, on average, respectively). When analysing the bioaccessibility of these compounds, it was found that low-temperature stabilization of the core samples provided the material with the highest content of bioactives including antioxidant phenolics (13.6 and 33.9 g/kg dw of feruloylquinic and sinapoylquinic acids, on average, respectively) and sulforaphane (4.1 g/kg dw, on average). These processing options enabled us to obtain a new product or ingredient rich in bioactive and bioaccessible compounds based on broccoli stalks with the potential for antioxidant and anti-inflammatory capacities of interest.

Green and Simple Extraction of Arsenic Species from Rice Flour Using a Novel Ultrasound-Assisted Enzymatic Hydrolysis Method

It is well established that arsenic (As) has many toxic compounds, and in particular, inorganic As (iAs) has been classified as a type-1 carcinogen. The measuring of As species in rice flour is of great importance since rice is a staple of the diet in many countries and a major contributor to As intake in the Asian diet. In this study, several solvents and techniques for the extraction of As species from rice flour samples prior to their analysis by HPLC-ICP-MS were investigated. The extraction methods were examined for their efficiency in extracting various arsenicals from a rice flour certified reference material, NMIJ-7532a, produced by the National Metrology Institute of Japan. Results show that ultrasound-assisted extraction at 60 °C for 1 h and then heating at 100 °C for 2.5 h in the oven using a thermostable α-amylase aqueous solution was highly effective in liberating the arsenic species. The recoveries of iAs and dimethylarsinic acid (DMA) in NMIJ-7532a were 99.7% ± 1.6% (n = 3) and 98.1% ± 2.3% (n = 3), respectively, in comparison with the certificated values. Thus, the proposed extraction method is a green procedure that does not use any acidic, basic, or organic solvents. Moreover, this extraction method could effectively maintain the integrity of the native arsenic species of As(III), As(V), monomethylarsonate (MMA), DMA, arsenobetaine (AsB) and arsenocholine (AsC). Under the optimum extraction, chromatography and ICP-MS conditions, the limits of detection (LOD) obtained were 0.47 ng g−1, 1.67 ng g−1 and 0.80 ng g−1 for As(III), As(V) and DMA, respectively, while the limits of quantification (LOQ) achieved were 1.51 ng g−1, 5.34 ng g−1 and 2.57 ng g−1 for As(III), As(V) and DMA, respectively. Subsequently, the proposed method was successfully applied to As speciation analysis for several rice flour samples collected from contaminated areas in China.

Natural Deep Eutectic Solvents as a Key Metal Extractant for Fractionation in Speciation Analysis

The research aimed to use natural deep eutectic solvents (NADES) as an extractant for fractionation of compounds of selected elements from young barley and to compare it with the fractionation of elements from certified element materials. The use of such a comparison made it possible to prove the possibility of extracting the same forms of elements (species) from different materials, which confirmed the option of using NADES as extractants in speciation analysis. The research was conducted with hyphenated techniques—separation by high-performance chromatography coupled to an isotope-specific detector, mass spectrometry (MS) with ionization in inductively coupled plasma (ICP)—which are widely used in speciation analysis. Natural deep eutectic solvents also help introduce Green Analytical Chemistry principles (GAC). According to the results of our studies, the use of different NADES permit the extraction of various metals from a single sample. Moreover, using other natural solvents of eutectic properties helps extract different species of a given metal.

The use of ultrasound in the South Cone region. Advances in organic and inorganic synthesis and in analytical methods

In organic and inorganic synthesis and in analytical methods, an external conventional heat source is usually applied to carry out a chemical reaction at a high temperature, or an extraction procedure. In the last decades, the use of ultrasound as an alternative energy source has become an interesting field of research in these topics in the South Cone region (Argentina, Chile, Uruguay, Southern Brazil and Paraguay). For this reason, the present review, covering the period 2009 to mid-2021, is a compilation of ultrasound-assisted synthetic and analytical methodologies.

Deep Eutectic Solvents Application in Food Analysis

Current trends in Analytical Chemistry are focused on the development of more sustainable and environmentally friendly procedures. However, and despite technological advances at the instrumental level having played a very important role in the greenness of the new methods, there is still work to be done regarding the sample preparation stage. In this sense, the implementation of new materials and solvents has been a great step towards the development of "greener" analytical methodologies. In particular, the application of deep eutectic solvents (DESs) has aroused great interest in recent years in this regard, as a consequence of their excellent physicochemical properties, general low toxicity, and high biodegradability if they are compared with classical organic solvents. Furthermore, the inclusion of DESs based on natural products (natural DESs, NADESs) has led to a notable increase in the popularity of this new generation of solvents in extraction techniques. This review article focuses on providing an overview of the applications and limitations of DESs in solvent-based extraction techniques for food analysis, paying especial attention to their hydrophobic or hydrophilic nature, which is one of the main factors affecting the extraction procedure, becoming even more important when such complex matrices are studied.

Deep Eutectic Solvents for the Extraction of Bioactive Compounds from Natural Sources and Agricultural By-Products

In this work, a review about the applicability of eutectic solvents, mainly deep eutectic solvents (DES) and natural deep eutectic solvents (NADES), for the extraction of bioactive compounds from natural products has been carried out. These alternative solvents have shown not only to have high extraction yields but also to be environmentally friendly, exhibiting very low or almost no toxicity, compared to conventional organic solvents. The last trends and main extraction methods that have been most widely used in studies using these emerging solvents have been reviewed, as well as the varied natural sources in which they have been used, including agro-food by-products. Besides the toxicity, biodegradability of these solvents is reviewed. Likewise, different reported bioactivity tests have been included, in which extracts obtained with these ecological solvents have been tested from antioxidant activity analysis to in vivo studies with rats, through in vitro cytotoxicity tests.

Deep-eutectic-solvent-based dispersive and emulsification liquid-liquid microextraction methods for the speciation of selenium in water and determining its total content levels in milk formula and cereals

Rapid and environmentally friendly ultrasound-assisted dispersive liquid-liquid microextraction (US-DLLμE) and vortex assisted-emulsification liquid-liquid microextraction (VA-ELLμE) methods are proposed for the speciation of selenium in domestic and mineral water samples. A deep eutectic solvent (DES) prepared with different ratios of choline chloride and phenol is used as an extractant for hydrophobic tetravalent Se complexed with diethyldithiocarbamate in different water samples. The total inorganic Se species levels in water samples were determined via reducing Se(vi) to Se(iv), using sodium thiosulphate as a reducing agent. The total Se levels in formula milk and cereal samples were determined after microwave acid digestion. The different heating steps in GFAAS were also optimized. The analytical parameters for US-DLLμE and VA-ELLμE, including pH, the volume of complexing agent, the ultrasound and vortex mixing shaking times, and the volume and composition of the deep eutectic solvent, were optimized. The accuracies of both methods were confirmed based on the analysis of a certified reference material (CRM) BCR 189 (wholemeal flour). The enhancement factor (EF) and limit of detection (LOD) for Se(iv) via US-DLLμE were found to be 90.8 and 0.029 μg L^-1, respectively, whereas an EF of 81.8 and LOD of 0.036 μg L^-1 were obtained via VA-ELLμE. The % relative standard deviation (%RSD) values obtained based on the analysis of six replicate standards under the optimized conditions for US-DLLμE and VA-ELLμE were found to be 4.2 and 5.8%, respectively. The optimized methods were applied to different drinking water samples, and acid-digested milk formula and baby cereal food samples.