Protein derived emulsifiers with antioxidant activity for stabilization of omega-3 emulsions

Development of low-allergenicity algal oil microcapsules with high encapsulation efficiency using extensively hydrolyzed whey protein

Algal oil is rich in docosahexaenoic acid, which is beneficial for infant development, but its susceptibility to oxidation necessitates microencapsulation. This study investigated the effects of incorporating varying ratios of octenyl succinic anhydride-modified starch (OSA-MS) into a base wall system comprising extensively hydrolyzed whey protein (eWPH) and maltodextrin (MD) to produce algal oil microcapsules with reduced allergenicity and high nutritional value, replacing whey protein isolate (WPI). The residual antigenicity of α-lactalbumin and β-lactoglobulin in eWPH was 3.60 % and 3.88 %, respectively. The addition of OSA-MS significantly enhanced emulsion stability in the eWPH/MD system for algal oil encapsulation. The highest microencapsulation efficiency (98.35 %) was achieved with 21 % OSA-MS, showing no significant difference from that of WPI/MD-based microcapsules. Furthermore, microcapsules prepared with eWPH/MD/OSA-MS (21 %) exhibited smooth surfaces, good dispersibility, and high solubility (91.79 %). These microcapsules also demonstrated superior oxidative stability after 18 days of storage at 60 °C compared to those with other OSA-MS ratios. Overall, incorporating OSA-MS into the eWPH/MD wall system achieved encapsulation performance comparable to WPI/MD, thereby broadening the application potential of eWPH in microencapsulation.

Use of emulsifying plant protein hydrolysates from winery, whiskey and brewery by-products for the development of echium oil delivery emulsions

This study investigates the production of plant protein hydrolysates from defatted grape seed flour and barley spent grains, by-products of wine, beer and whiskey industries, using limited hydrolysis with subtilisin or trypsin. The hydrolysates were characterized by protein content, molecular weight, antioxidant capacity, interfacial adsorption, dilatational rheology, and interfacial conformational changes using synchrotron radiation circular dichroism. Physical and oxidative stability of 5 % echium oil-in-water emulsions (pH 7), stabilized by the hydrolysates, were studied during seven days of storage. The trypsin-derived hydrolysate from brewers' spent grains resulted in the most physically stable emulsion due to enhanced interfacial adsorption and higher dilatational modulus. Alternatively, the trypsin-treated grape seed flour hydrolysate provided the emulsion with the highest oxidative stability, aligning with its superior in vitro antioxidant capacity. These results show the potential of wine and brewery industry side streams as a sustainable source of plant-based emulsifiers with application in omega-3 delivery systems.

Use of olive and sunflower protein hydrolysates for the physical and oxidative stabilization of fish oil-in-water emulsions

BACKGROUND

Olive and sunflower seeds are by-products generated in large amounts by the plant oil industry. The technological and biological properties of plant-based substrates, especially protein hydrolysates, have increased their use as functional ingredients for food matrices. The present study evaluates the physical and oxidative stabilities of 50 g kg-1 fish oil-in-water emulsions where protein hydrolysates from olive and sunflower seeds were incorporated at 20 g kg-1 protein as natural emulsifiers. The goal was to investigate the effect of protein source (i.e. olive and sunflower seeds), enzyme (i.e. subtilisin and trypsin) and degree of hydrolysis (5%, 8% and 11%) on the ability of the hydrolysate to stabilize the emulsion and retard lipid oxidation over a 7-day storage period.

RESULTS

The plant protein hydrolysates displayed different emulsifying and antioxidant capacities when incorporated into the fish oil-in-water emulsions. The hydrolysates with degrees of hydrolysis (DH) of 5%, especially those from sunflower seed meal, provided higher physical stability, regardless of the enzymatic treatment. For example, the average D [2, 3] values for the emulsions containing sunflower subtilisin hydrolysates at DH 5% only slightly increased from 1.21 ± 0.02 μm (day 0) to 2.01 ± 0.04 μm (day 7). Moreover, the emulsions stabilized with sunflower or olive seed hydrolysates at DH 5% were stable against lipid oxidation throughout the storage experiment, with no significant variation in the oxidation indices between days 0 and 4.

CONCLUSION

The results of the present study support the use of sunflower seed hydrolysates at DH 5% as natural emulsifiers for fish oil-in-water emulsions, providing both physical and chemical stability against lipid oxidation. © 2024 Society of Chemical Industry.

Phycocyanin/tannic acid complex nanoparticles as Pickering stabilizer with synergistic interfacial antioxidant properties

This study reported a type of phycocyanin (PC)-tannic acid (TA) complex nanoparticles (NPs) fabricated by simply mixing PC with TA at appropriate mass ratios. The assembly of PC-TA NPs was driven by secondary forces involving hydrophobic interactions and hydrogen bonding. PC-TA NPs promoted formations of Pickering emulsions with an oil volume fraction (φ) of 0.1-0.8. The interfacial antioxidant ability of PC-TA NPs was evaluated by comparing the contents of hydroperoxides, malonaldehyde, and hexanal due to lipid oxidation. The results showed that PC-TA NPs retarded lipid oxidation more efficiently than did PC, TA, tween 20, or tween 80, which suggested the synergistic antioxidant action of PC and TA. Besides, the PC-TA NPs stabilized high internal phase emulsion facilitated a higher retention of β-carotene under UV irradiation. Altogether, our findings demonstrate that the modification of PC by TA represents a strategy to fabricate PC-TA NPs with enhanced emulsification and antioxidant efficiency.

Protein Hydrolysates from Fishery Processing By-Products: Production, Characteristics, Food Applications, and Challenges

Fish processing by-products such as frames, trimmings, and viscera of commercial fish species are rich in proteins. Thus, they could potentially be an economical source of proteins that may be used to obtain bioactive peptides and functional protein hydrolysates for the food and nutraceutical industries. The structure, composition, and biological activities of peptides and hydrolysates depend on the freshness and the actual composition of the material. Peptides isolated from fishery by-products showed antioxidant activity. Changes in hydrolysis parameters changed the sequence and properties of the peptides and determined their physiological functions. The optimization of the value of such peptides and the production costs must be considered for each particular source of marine by-products and for their specific food applications. This review will discuss the functional properties of fishery by-products prepared using hydrolysis and their potential food applications. It also reviews the structure-activity relationships of the antioxidant activity of peptides as well as challenges to the use of fishery by-products for protein hydrolysate production.

Physical and Oxidative Stability of Emulsions Stabilized with Fractionated Potato Protein Hydrolysates Obtained from Starch Production Side Stream

This work studies the emulsifying and antioxidant properties of potato protein hydrolysates (PPHs) fractions obtained through enzymatic hydrolysis of potato protein using trypsin followed by ultrafiltration. Unfractionated (PPH1) and fractionated (PPH2 as >10 kDa, PPH3 as 10-5 kDa, PPH4 as 5-0.8 kDa, and PPH5 as <0.8 kDa) protein hydrolysates were evaluated. Pendant drop tensiometry and dilatational rheology were applied for determining the ability of PPHs to reduce interfacial tension and affect the viscoelasticity of the interfacial films at the oil-water interface. Peptides >10 kDa showed the highest ability to decrease oil-water interfacial tension. All PPH fractions predominantly provided elastic, weak, and easily stretchable interfaces. PPH2 provided a more rigid interfacial layer than the other hydrolysates. Radical scavenging and metal chelating activities of PPHs were also tested and the highest activities were provided by the unfractionated hydrolysate and the fractions with peptides >5 kDa. Furthermore, the ability of PPHs to form physically and oxidatively stable 5% fish oil-in-water emulsions (pH 7) was investigated during 8-day storage at 20 °C. Our results generally show that the fractions with peptides >5 kDa provided the highest physicochemical stability, followed by the fraction with peptides between 5 and 0.8 kDa. Lastly, promising sensory results with mostly mild attributes were obtained even at protein concentration levels that are higher than needed to obtain functional properties. The more prominent attributes (e.g., bitterness and astringency) were within an acceptable range for PPH3 and PPH4.

Bioactive food-derived peptides for functional nutrition: Effect of fortification, processing and storage on peptide stability and bioactivity within food matrices

New challenges in food production and processing are appearing due to increasing global population and the purpose of achieving a sustainable food system. Bioactive peptides obtained from food proteins can be employed to prevent or pre-treat several diseases such as diabetes, cardiovascular diseases, inflammation, thrombosis, cancer, etc. Research on the bioactivity of protein hydrolysates is very extensive, especially in vitro tests, although there are also tests in animal models and in humans studies designed to verify their efficacy. However, there is very little published literature on the functionality of these protein hydrolysates as an ingredient in food matrices, as well as the effect that thermal or non-thermal processing, and storage may have on the bioactivity of these bioactive peptides. This review aims to summarize the published literature on protein hydrolysates as a functional ingredient including processing, storage and simulated gastrointestinal digestion regarding the bioactivity of these peptides inside food matrices.

Stability and bioactivity of peptides in food matrices based on processing conditions

Bioactive peptides (BPs) generated from food proteins can serve therapeutic purposes against degenerative and cardiovascular diseases such as inflammation, diabetes, and cancer. There are numerous reports on the in vitro, animal, and human studies of BPs, but not as much information on the stability and bioactivity of these peptides when incorporated in food matrices. The effects of heat and non-heat processing of the food products, and storage on the bioactivity of the BPs, are also lacking. To this end, we describe the production of BPs in this review, followed by the food processing conditions that affect their storage bioactivity in the food matrices. As this area of research is open for industrial innovation, we conclude that novel analytical methods targeting the interactions of BPs with other components in food matrices would be greatly significant while elucidating their overall bioactivity before, during and after processing.

Evaluation of the Physical and Oxidative Stabilities of Fish Oil-in-Water-in-Olive Oil Double Emulsions (O1/W/O2) Stabilized with Whey Protein Hydrolysate

This work studied the physical and oxidative stabilities of fish oil-in-water-in-olive oil double emulsions (O₁/W/O₂), where whey protein hydrolysate was used as a hydrophilic emulsifier. A 20 wt.% fish oil-in-water emulsion, stabilized with whey protein hydrolysate (oil: protein ratio of 5:2 w/w) and with a zeta potential of ~-40 mV, only slightly increased its D_4,3 value during storage at 8 °C for seven days (from 0.725 to 0.897 µm), although it showed severe physical destabilization when stored at 25 °C for seven days (D_4,3 value increased from 0.706 to 9.035 µm). The oxidative stability of the 20 wt.% fish oil-in-water emulsion decreased when the storage temperature increased (25 vs. 8 °C) as indicated by peroxide and p-anisidine values, both in the presence or not of prooxidants (Fe²⁺). Confocal microscopy images confirmed the formation of 20 wt.% fish oil-in-water-in-olive oil (ratio 25:75 w/w) using Polyglycerol polyricinoleate (PGPR, 4 wt.%). Double emulsions were fairly physically stable for 7 days (both at 25 and 8 °C) (Turbiscan stability index, TSI < 4). Moreover, double emulsions had low peroxide (<7 meq O₂/kg oil) and p-anisidine (<7) values that did not increase during storage independently of the storage temperature (8 or 25 °C) and the presence or not of prooxidants (Fe²⁺), which denotes oxidative stability.

Recent Trends in Improving the Oxidative Stability of Oil-Based Food Products by Inhibiting Oxidation at the Interfacial Region

In recent years, new approaches have been developed to limit the oxidation of oil-based food products by inhibiting peroxidation at the interfacial region. This review article describes and discusses these particular approaches. In bulk oils, modifying the polarity of antioxidants by chemical methods (e.g., esterifying antioxidants with fatty alcohol or fatty acids) and combining antioxidants with surfactants with low hydrophilic–lipophilic balance value (e.g., lecithin and polyglycerol polyricinoleate) can be effective strategies for inhibiting peroxidation. Compared to monolayer emulsions, a thick interfacial layer in multilayer emulsions and Pickering emulsions can act as a physical barrier. Meanwhile, high viscosity of the water phase in emulsion gels tends to hinder the diffusion of pro-oxidants into the interfacial region. Furthermore, applying surface-active substances with antioxidant properties (such as proteins, peptides, polysaccharides, and complexes of protein-polysaccharide, protein-polyphenol, protein-saponin, and protein-polysaccharide-polyphenol) that adsorb at the interfacial area is another novel method for enhancing oil-in-water emulsion oxidative stability. Furthermore, localizing antioxidants at the interfacial region through lipophilization of hydrophilic antioxidants, conjugating antioxidants with surfactants, or entrapping antioxidants into Pickering particles can be considered new strategies for reducing the emulsion peroxidation.

Oxidation and oxidative stability in emulsions

Emulsions are implemented in the fabrication of a wide array of foods and therefore are of great importance in food science. However, the application of emulsions in food production is restricted by two main obstacles, that is, physical and oxidative stability. The former has been comprehensively reviewed somewhere else, but our literature review indicated that there is a prominent ground for reviewing the latter across all kinds of emulsions. Therefore, the present study was formulated in order to review oxidation and oxidative stability in emulsions. In doing so, different measures to render oxidative stability to emulsions are reviewed after introducing lipid oxidation reactions and methods to measure lipid oxidation. These strategies are scrutinized in four main categories, namely storage conditions, emulsifiers, optimization of production methods, and antioxidants. Afterward, oxidation in all types of emulsions, including conventional ones (oil-in-water and water-in-oil) and uncommon emulsions in food production (oil-in-oil), is reviewed. Furthermore, the oxidation and oxidative stability of multiple emulsions, nanoemulsions, and Pickering emulsions are taken into account. Finally, oxidative processes across different parent and food emulsions were explained taking a comparative approach.

Comparative Study on the Oxidative Stability of Encapsulated Fish Oil by Monoaxial or Coaxial Electrospraying and Spray-Drying

The impact of the encapsulation technology on the oxidative stability of fish-oil-loaded capsules was investigated. The capsules (ca. 13 wt% oil load) were produced via monoaxial or coaxial electrospraying and spray-drying using low molecular weight carbohydrates as encapsulating agents (e.g., glucose syrup or maltodextrin). The use of spray-drying technology resulted in larger capsules with higher encapsulation efficiency (EE > 84%), whilst the use of electrospraying produced encapsulates in the sub-micron scale with poorer retention properties (EE < 72%). The coaxially electrosprayed capsules had the lowest EE values (EE = 53-59%), resulting in the lowest oxidative stability, although the lipid oxidation was significantly reduced by increasing the content of pullulan in the shell solution. The emulsion-based encapsulates (spray-dried and monoaxially electrosprayed capsules) presented high oxidative stability during storage, as confirmed by the low concentration of selected volatiles (e.g., (E,E)-2,4-heptadienal). Nonetheless, the monoaxially electrosprayed capsules were the most oxidized after production due to the emulsification process and the longer processing time.

Impact of Phenolic Acid Derivatives on the Oxidative Stability of β-Lactoglobulin-Stabilized Emulsions

Proteins, such as β-lactoglobulin (β-Lg), are often used to stabilize oil-water-emulsions. By using an additional implementation of phenolic compounds (PC) that might interact with the proteins, the oxidative stability can be further improved. Whether PC have a certain pro-oxidant effect on oxidation processes, while interacting non-covalently (pH-6) or covalently (pH.9) with the interfacial protein-film, is not known. This study aimed to characterize the impact of phenolic acid derivatives (PCDs) on the antioxidant efficacy of the interfacial β-Lg-film, depending on their structural properties and pH-value. Electron paramagnetic resonance (EPR) analyses were performed to assess the radical scavenging in the aqueous and oil phases of the emulsion, and the complexation of transition metals: these are well known to act as pro-oxidants. Finally, in a model linseed oil emulsion, lipid oxidation products were analyzed over storage time in order to characterize the antioxidant efficacy of the interfacial protein-film. The results showed that, at pH.6, PCDs can scavenge hydrophilic radicals and partially scavenge hydrophobic radicals, as well as reduce transition metals. As expected, transition metals are complexed to only a slight degree, leading to an increased lipid oxidation through non-complexed reduced transition metals. At pH.9, there is a strong complexation between PCDs and the transition metals and, therefore, a decreased ability to reduce the transition metals; these do not promote lipid oxidation in the emulsion anymore.

Separation, identification, and design of α-glucosidase inhibitory peptides based on the molecular mechanism from Paeonia ostii 'Feng Dan' seed protein

Peptides are considered promising sources of nutraceuticals. In this study, a mixture of peptides was prepared from Paeonia ostii 'Feng Dan' seed meal protein by continuous enzymolysis. Successive separation and purification procedures, including ultrafiltration and reversed-phase high-performance liquid chromatography (RP-HPLC), were performed, and six novel peptides were identified by liquid chromatography-electrospray ionization source-mass spectrometry/mass spectrometry (LC-ESI-MS/MS). In an in vitro antidiabetic activity test, Tyr-Phe-Phe-Met exhibited stronger α-glucosidase inhibitory activity (48.17 ± 3.34% at 1 mg/mL) than the other peptides. Docking studies of this peptide into the active site of α-glucosidase showed that the formation of hydrogen bonds could be critical for the enzymatic trapping of inhibitory peptides. Furthermore, two novel peptides, Phe-Phe-Phe-Met (IC₅₀  = 245.46 ± 44.01 µM) and Tyr-Tyr-Phe-Met (IC₅₀  = 306.71 ± 48.17 µM), with improved α-glucosidase inhibitory activity, were designed based on molecular docking. Therefore, the seed meal of Paeonia ostii could be considered a functional food ingredient for the management of hyperglycemia, and three novel peptides were identified as α-glucosidase inhibitors.

Evaluation of Plant Protein Hydrolysates as Natural Antioxidants in Fish Oil-In-Water Emulsions

In this work, we evaluated the physical and oxidative stabilities of 5% w/w fish oil-in-water emulsions stabilized with 1%wt Tween20 and containing 2 mg/mL of protein hydrolysates from olive seed (OSM–H), sunflower (SFSM–H), rapeseed (RSM–H) and lupin (LUM–H) meals. To this end, the plant-based substrates were hydrolyzed at a 20% degree of hydrolysis (DH) employing a mixture 1:1 of subtilisin: trypsin. The hydrolysates were characterized in terms of molecular weight profile and in vitro antioxidant activities (i.e., DPPH scavenging and ferrous ion chelation). After incorporation of the plant protein hydrolysates as water-soluble antioxidants in the emulsions, a 14-day storage study was conducted to evaluate both the physical (i.e., ζ-potential, droplet size and emulsion stability index) and oxidative (e.g., peroxide and anisidine value) stabilities. The highest in vitro DPPH scavenging and iron (II)-chelating activities were exhibited by SFSM–H (IC₅₀ = 0.05 ± 0.01 mg/mL) and RSM–H (IC₅₀ = 0.41 ± 0.06 mg/mL). All the emulsions were physically stable within the storage period, with ζ-potential values below −35 mV and an average mean diameter D[4,3] of 0.411 ± 0.010 μm. Although LUM–H did not prevent lipid oxidation in emulsions, OSM–H and SFSM–H exhibited a remarkable ability to retard the formation of primary and secondary lipid oxidation products during storage when compared with the control emulsion without antioxidants. Overall, our findings show that plant-based enzymatic hydrolysates are an interesting alternative to be employed as natural antioxidants to retard lipid oxidation in food emulsions.

Structure of whey protein hydrolysate used as emulsifier in wet and dried oil delivery systems: Effect of pH and drying processing

The secondary structure of whey protein concentrate hydrolysate (WPCH), used as an emulsifier in oil delivery systems, was investigated using Synchrotron Radiation Circular Dichroism (SRCD). The effect of pH on the conformation of peptides in solution and adsorbed at the oil/water interface, as well as the thermal stability of the systems was studied. Furthermore, oil-loaded microcapsules were produced by spray-drying or electrospraying to investigate the influence of encapsulating agents (glucose syrup, maltodextrin) and drying technique on the secondary structure of WPCH at the oil/water interface. Enzymatic hydrolysis resulted in peptides with a highly unordered structure (∼60% turns and unordered regions) in solution. However, WPCH adsorption onto the oil/water interface increased the α-helical content resulting in an improved thermal stability. The encapsulating agents and spray-drying process did not modify the conformation of WPCH at the oil/water interface. Nonetheless, electrospraying affected the SRCD spectra obtained for WPCH adsorbed at the oil/water interface.

Faba bean protein: A promising plant-based emulsifier for improving physical and oxidative stabilities of oil-in-water emulsions

Faba bean is a protein-rich, sustainable, but understudied legume. Faba bean protein isolates (FBPIs) can serve as promising emulsifiers. This review aims to summarize the research on FBPIs as emulsifiers and various modification methods to improve the emulsifying functionalities. The emulsifying activities of FBPIs depend on several physiochemical characteristics (e.g. solubility, surface hydrophobicity, surface charge, interfacial activity). Physical modifications, especially via linking FBPIs electrostatically to polysaccharides can effectively increase the interfacial layer thickness/compactness and maintain the interfacial protein adsorption. Chemical modifications of FBPIs (e.g. acetylation and Maillard reaction) could improve the interfacial activity and affect the droplet-size distribution. Enzymatic modifications, usually either via hydrolysis or cross-linking, help to optimize the molecular size, solubility, and surface hydrophobicity of FBPIs. It is critical to consider the lipid/protein oxidative stability and physical stability when optimizing the emulsifying functionality of FBPIs. With suitable modifications, FBPI can serve as a promising emulsifier in food production.

Emerging Emulsifiers: Conceptual Basis for the Identification and Rational Design of Peptides with Surface Activity

Emulsifiers are gradually evolving from synthetic molecules of petrochemical origin to biomolecules mainly due to health and environmental concerns. Peptides represent a type of biomolecules whose molecular structure is composed of a sequence of amino acids that can be easily tailored to have specific properties. However, the lack of knowledge about emulsifier behavior, structure-performance relationships, and the implementation of different design routes have limited the application of these peptides. Some computational and experimental approaches have tried to close this knowledge gap, but restrictions in understanding the fundamental phenomena and the limited property data availability have made the performance prediction for emulsifier peptides an area of intensive research. This study provides the concepts necessary to understand the emulsifying behavior of peptides. Additionally, a straightforward description is given of how the molecular structure and conditions of the system directly impact the peptides' ability to stabilize emulsion droplets. Moreover, the routes to design and discover novel peptides with interfacial and emulsifying activity are also discussed, along with the strategies to address some of their major pitfalls and challenges. Finally, this contribution reviews methodologies to build and use data sets containing standard properties of emulsifying peptides by looking at successful applications in different fields.

Biofunctionality of Enzymatically Derived Peptides from Codfish (Gadus morhua) Frame: Bulk In Vitro Properties, Quantitative Proteomics, and Bioinformatic Prediction

Protein hydrolysates show great promise as bioactive food and feed ingredients and for valorization of side-streams from e.g., the fish processing industry. We present a novel approach for hydrolysate characterization that utilizes proteomics data for calculation of weighted mean peptide properties (length, molecular weight, and charge) and peptide-level abundance estimation. Using a novel bioinformatic approach for subsequent prediction of biofunctional properties of identified peptides, we are able to provide an unprecedented, in-depth characterization. The study further characterizes bulk emulsifying, foaming, and in vitro antioxidative properties of enzymatic hydrolysates derived from cod frame by application of Alcalase and Neutrase, individually and sequentially, as well as the influence of heat pre-treatment. All hydrolysates displayed comparable or higher emulsifying activity and stability than sodium caseinate. Heat-treatment significantly increased stability but showed a negative effect on the activity and degree of hydrolysis. Lower degrees of hydrolysis resulted in significantly higher chelating activity, while the opposite was observed for radical scavenging activity. Combining peptide abundance with bioinformatic prediction, we identified several peptides that are likely linked to the observed differences in bulk emulsifying properties. The study highlights the prospects of applying proteomics and bioinformatics for hydrolysate characterization and in food protein science.

Rice peptide nanoparticle as a bifunctional food-grade Pickering stabilizer prepared by ultrasonication: Structural characteristics, antioxidant activity, and emulsifying properties

In this study, a novel food-grade Pickering stabilizer was fabricated from insoluble rice peptide aggregates that are considered undesirable and formed during the hydrolysis of rice protein using ultrasonication. The results confirmed that ultrasonication was effective in fabricating rice peptide nanoparticles (RPNs) with a spherical appearance, and the particle size was reduced with ultrasonic time, reaching a minimum size of 357.8 nm in 30 min. Moreover, ultrasonic treatment could improve the antioxidant activity of RPNs by promoting the DPPH scavenging (3.5-fold increase) and Fe²⁺ chelating activity (3.8-fold increase). Notably, the bioactive RPNs could form stable Pickering emulsions that possess both physical and oxidative stability during storage, which might be due to the antioxidative physical barrier formed by RPNs. These findings suggest a new approach for the effective utilization of insoluble aggregates produced during protein hydrolysis as well as provide a novel bifunctional Pickering stabilizer with intrinsic antioxidant properties.

Antidiabetic Food-Derived Peptides for Functional Feeding: Production, Functionality and In Vivo Evidences

Bioactive peptides released from the enzymatic hydrolysis of food proteins are currently a trending topic in the scientific community. Their potential as antidiabetic agents, by regulating the glycemic index, and thus to be employed in food formulation, is one of the most important functions of these peptides. In this review, we aimed to summarize the whole process that must be considered when talking about including these molecules as a bioactive ingredient. In this regard, at first, the production, purification and identification of bioactive peptides is summed up. The detailed metabolic pathways described included carbohydrate hydrolases (glucosidase and amylase) and dipeptidyl-peptidase IV inhibition, due to their importance in the food-derived peptides research field. Then, their characterization, concerning bioavailability in vitro and in situ, stability and functionality in food matrices, and ultimately, the in vivo evidence (from invertebrate animals to humans), was described. The future applicability that these molecules have due to their biological potential as functional ingredients makes them an important field of research, which could help the world population avoid suffering from several diseases, such as diabetes.