Antifouling molecularly imprinted membranes for pretreatment of milk samples: Selective separation and detection of lincomycin

An electrochemiluminescence aptasensor based on Ti3C2 QDs-1T/2H MoS2 nano-hybrid material for the highly sensitive detection of lincomycin

Developing a highly selective and sensitive analysis strategy for lincomycin (LIN) is of great significance for environmental protection and food safety. Herein, we reported a novel electrochemiluminescence (ECL) aptasensor based on Ti3C2 QDs-1T/2H MoS2 nano-hybrid luminophore for detection of LIN. The hybridization of Ti3C2 QDs and 1T/2H MoS2 endowed nanocomposite with structural and compositional advantages for boosting the ECL performance of QDs by about three times. This enhancement could be attributed to the remarkable electrocatalytic activity and high conductivity exhibited by 1T/2H MoS2. Secondly, the great surface area of 1T/2H MoS2 is conducive to the high dispersion of Ti3C2 QDs, and its good conductivity could promote charge transfer. On the other hand, the excellent catalytic performance of 1T/2H MoS2 could facilitate the reduction of S2O82- to produce more radical, which significantly enhance the ECL signal of Ti3C2 QDs. Given these features, a sensor for detection of LIN was established based on specific recognition between target and aptamer. The sensor showed a good linear relationship (0.05 ng mL-1 ∼100 μg mL-1) with a detection limit as low as 0.02 ng mL-1. It is worth noting that this work has been validated in testing milk samples, exhibiting great potential application prospects in food analysis.

Computational simulation-assisted design and experimental verification of molecularly imprinted polymers for selective extraction of chlorogenic acid

Chlorogenic acid (CGA) is an active ingredient in honeysuckle with a broad-spectrum of antibacterial activity, suppressing tumor growth and other pharmacological effects. However, it is susceptible to damage during traditional extraction and separation processes. Therefore, developing selective and efficient extraction methods of CGA is essential. Based on computational molecular simulations, a reliable and efficient molecularly imprinted polymers (MIPs) were successfully developed for selective extraction of CGA. MIPs and non-molecularly imprinted polymers (NIPs) were synthesized using a precipitation polymerization method, employing three different functional monomers: [methacrylic acid (MAA), 4-vinylpyridine (4-VP), and methyl methacrylate (MMA)], with CGA serving as the template molecule. To simulate the polymers and predict the optimal ratio between the template and functional monomer, the computational studies and adsorption performance experiments were carried out. The adsorption characteristics and thermal stability of polymers were evaluated by isothermal adsorption, adsorption kinetics, selective adsorption and thermogravimetric analysis, aiming to obtain the MIPs with specific recognition and selectivity for CGA. When the molar ratio of template CGA to functional monomer 4-VP was 1:8, the prepared MIPs was found to have the maximum adsorption capacity (14.85 mg g-1) and the highest imprinting factor (1.74) at the CGA concentration of 100 mg L-1. These results were consistent with those obtained by computational molecular simulation. This study not only provides good guidance for developing separation materials for extracting CGA from natural plants but also inspires the application of computer simulation and molecular docking techniques in the preparation of specific MIPs materials.

An underwater stable and durable gelatin composite hydrogel coating for biomedical applications

Developing underwater stable and durable hydrogel coatings with drag-reducing, drug release, and antibacterial properties is essential for lots of biomedical applications. However, most hydrogel coatings cannot meet the requirement of underwater stability and versatility, which severely limits their widespread use. In this work, an underwater stable, durable and substrate-independent gelatin composite hydrogel (GMP) coating is developed through covalent crosslinks, where a silane coupling agent with an unsaturated double bond is grafted onto a substrate of co-deposited polydopamine and polyethylenimine. GMP coating can be easily coated onto various medical device surfaces, such as artificial joints, catheters, tracheal tubes and titanium alloys, showing excellent structural stability and mechanical tunability under extreme conditions of ultrasonic treatment for 1 h (400 W of ultrasonic power) or underwater shearing for 14 days (400 rpm). Besides, friction experiment reveals that GMP coating exhibits good lubrication properties (coefficient of friction < 0.003). The drug-loading and bacterial inhibition ring tests show that the GMP coating has a tunable drug release ability with the final releasing ratios of 70-95% by changing the content of poly (ethylene glycol) diacrylate. This work offers a scalable approach of fabricating bio-functional and stable hydrogel coatings, which can be potentially used in biomedical applications.

Molecularly imprinted composite membranes with interleaved imprinted network structure for highly selective separation of acteoside

Acteoside (ACT) is one of the phenylethanoid glycosides in Cistanche tubulosa. The ACT molecules have high medicinal value, but the content of ACT is scarce. Therefore, it is imperative to develop the ACT-based molecularly imprinted composite membranes (A-MICMs) with highly selective separation of ACT. In this study, the amine-polyhedral oligomeric sesquisiloxanes (NH2-POSS) were uniformly introduced into polydopamine modified polyvinylidene fluoride (pDA@PVDF) membranes to fabricate NH2-POSS-pDA@PVDF. Then, the ACT-imprinted layers were synthesized on the surface of NH2-POSS-pDA@PVDF to obtain A-MICMs. The results showed that the optimal conditions were 180 mg DA, 12 h DA self-polymerization time, 400 mg NH2-POSS and 10 h washing time for the synthesis of A-MICMs. The results of adsorption isotherm experiments showed that there was a single layer adsorbate analyte on the A-MICMs. The results of adsorption kinetic experiments showed that chemisorption mechanism played a major function in the adsorption process of A-MICMs for ACT. The A-MICMs exhibited the maximum rebinding capacity of 98.37 mg⋅g-1, an excellent rebinding selectivity of 4.63, and the permselectivity of 7.02. The same A-MICMs kept 95.99% of the maximum rebinding capacity for ACT after 5 adsorption-desorption cycles. The designed A-MICMs with the interleaved imprinted network structure have a potential to be applied to the highly selective separation of bioactive components from natural products.

Advanced Development of Molecularly Imprinted Membranes for Selective Separation

Molecularly imprinted membranes (MIMs), the incorporation of a given target molecule into a membrane, are generally used for separating and purifying the effective constituents of various natural products. They have been in use since 1990. The application of MIMs has been studied in many fields, including separation, medicine analysis, solid-phase extraction, and so on, and selective separation is still an active area of research. In MIM separation, two important membrane performances, flux and permselectivities, show a trade-off relationship. The enhancement not only of permselectivity, but also of flux poses a challenging task for membranologists. The present review first describes the recent development of MIMs, as well as various preparation methods, showing the features and applications of MIMs prepared with these different methods. Next, the review focuses on the relationship between flux and permselectivities, providing a detailed analysis of the selective transport mechanisms. According to the majority of the studies in the field, the paramount factors for resolving the trade-off relationship between the permselectivity and the flux in MIMs are the presence of effective high-density recognition sites and a high degree of matching between these sites and the imprinted cavity. Beyond the recognition sites, the membrane structure and pore-size distribution in the final imprinted membrane collectively determine the selective transport mechanism of MIM. Furthermore, it also pointed out that the important parameters of regeneration and antifouling performance have an essential role in MIMs for practical applications. This review subsequently highlights the emerging forms of MIM, including molecularly imprinted nanofiber membranes, new phase-inversion MIMs, and metal-organic-framework-material-based MIMs, as well as the construction of high-density recognition sites for further enhancing the permselectivity/flux. Finally, a discussion of the future of MIMs regarding breakthroughs in solving the flux-permselectivity trade-off is offered. It is believed that there will be greater advancements regarding selective separation using MIMs in the future.

Carbon nanomaterial-based molecularly imprinted polymer sensors for detection of hazardous substances in food: recent progress and future trends

The presence of various harmful substances in food is significantly risky to human health. Therefore, simple, rapid, and selective food hazard analysis tools have become a focus of sensing research. At present, molecularly imprinted polymers (MIPs) have attracted more and more attention because of their easy preparation and high selectivity. Due to their simple preparation, low cost, large specific surface area, and high conductivity, carbon nanomaterial can be used as sensing substrate carriers. Therefore, the combination of carbon nanomaterial with MIPs has attracted great attention. This paper summarizes the development, composition, and preparation methods of MIPs, as well as the latest research progress in carbon nanomaterials for the detection of various food hazards using sensors. In addition, the practical applications of carbon nanomaterial-based MIP sensors, their current challenges and future trends, and the ongoing efforts devoted to developing new and efficient carbon nanomaterial-based MIP sensing platforms are also introduced.

Bioselective PES Membranes Based on Chitosan Functionalization and Virus-Imprinted NanoMIPs for Highly Efficient Separation of Human Pathogenic Viruses from Water

Waterborne viruses are a public health concern due to relatively small infection doses. Particularly, adenoviruses (AdVs) are more resistant than RNA viruses to water purification treatments in terms of ultraviolet (UV) irradiation, pH, and chlorination tolerance. Moreover, AdVs are one of the most predominant waterborne viruses. Membrane separations have proven superior removal capabilities of waterborne pathogens over other separation methods. However, virus removal at ultratrace levels is still a significant challenge for current membrane technology. This study successfully addressed this challenge by developing a bioselective polyethersulfone (PES) membrane by a joint strategy involving chitosan hydrophilic surface modification and the immobilization of adenovirus-specific molecularly imprinted nanoparticles (nanoMIPs). The topological and chemical changes taking place on the membrane surface were characterized by using atomic force microscopy (AFM) and scanning electron microscopy (SEM). Furthermore, hydrophilicity and membrane performance were investigated in terms of swelling behavior, permeation flux, and surface fouling studies. The membrane efficacy was evaluated by filtration experiments, where the virus concentration of the loading solution before filtration and the permeates after filtration was quantified. The novel bioselective membrane showed excellent virus removal capabilities by separating 99.99% of the viruses from the water samples.

New Insights into High-Performance Nanocomposite Membranes with Threefold-Imprinted Layers for Selective Recognition and Separation

Herein, we reported on mixed-matrix membranes with polydopamine (PDA)-based threefold-imprinted layers (MMMs-PTIs), in which the dopamine molecules were simultaneously regarded as functional monomers and cross-linking agents during the first-in-class ternary-PDA-based imprinted method. Threefold-ibuprofen-imprinted layers were constructed into and onto the MMMs-PTIs through the phase inversion process, followed by suction filtration strategy, in which the PDA-based ibuprofen-imprinted activated carbon (AC)/SiO₂ and TiO₂/GO were chosen as fillers. Based on the threefold-imprinted SiO₂/AC and polymer and TiO₂/GO-loaded structure, rebinding capacities and permselectivity of MMMs-PTIs had been successfully enhanced, and the selective recognition and separation mechanism had been finally evaluated based on the static adsorption/permeation results. Both high rebinding capacity (53.22 mg/g) and adsorption selectivity (α > 2.0) had been achieved. Importantly, as to the permselectivity performance of MMMs-PTIs toward different compounds, the ibuprofen-permeation efficiencies (β value) of MMMs-PTIs reached 4.07, 4.08, and 3.77, respectively. That is to say, remarkable and stable permselectivity performance could be obtained, which demonstrated the successful preparation of good recognizability and permeability toward ibuprofen.

Molecularly Imprinted Affinity Membrane: A Review

A molecularly imprinted affinity membrane (MIAM) can perform separation with high selectivity due to its unique molecular recognition introduced from the molecular-printing technique. In this way, a MIAM is able to separate a specific or targeted molecule from a mixture. In addition, it is possible to achieve high selectivity while maintaining membrane permeability. Various methods have been developed to produce a MIAM with high selectivity and productivity, with their respective advantages and disadvantages. In this paper, the MIAM is reviewed comprehensively, from the fundamentals of the affinity membrane to its applications. First, the development of a MIAM and various preparation methods are presented. Then, applications of MIAMs in sensor, metal ion separation, and organic compound separation are discussed. The last part of the review discusses the outlook of MIAMs for future development.

Molecularly Imprinting Microfiltration Membranes Able to Absorb Diethyl Phthalate from Water

In this study, polypropylene porous membranes with an average pore size of 1.25 µm were modified by barrier discharge plasma. Next, molecularly imprinted layers with an imprint of diethyl phthalate (DEP) ware grafted of their surface. In order to optimize the composition of the modifying mixture various solvents, the ratios of functional monomers and the cross-linking monomer as well as various amounts of phthalate were verified. It was shown that the most effective membranes were obtained during polymerization in n-octane with the participation of functional monomers in the ratio 3:7 and the amount of phthalate 7 wt.%. The membranes were tested in the filtration process as well as static and dynamic sorption. In all of these processes, the imprinted membranes showed better properties than those without the imprint. The diethyl phthalate retention coefficient was 36.12% for membranes with a grafting yield of 1.916 mg/cm². On the other hand, DEP static sorption for the imprinted membranes was 3.87 µmol/g higher than for non-imprinted membranes. Also, in the process of dynamic sorption higher values were observed for membranes with the imprint (DS_MIM, 4.12 µmol/g; DS_NIM, 1.18 µmol/g). The membranes were also tested under real conditions. In the process of filtration of tap water contaminated with phthalate, the presence of imprints in the membrane structure resulted in more than three times higher sorption values (3.09 µmol/g) than in the case of non-imprinted membranes (1.12 µmol/g).

Green Chemistry and Molecularly Imprinted Membranes

Technological progress has made chemistry assume a role of primary importance in our daily life. However, the worsening of the level of environmental pollution is increasingly leading to the realization of more eco-friendly chemical processes due to the advent of green chemistry. The challenge of green chemistry is to produce more and better while consuming and rejecting less. It represents a profitable approach to address environmental problems and the new demands of industrial competitiveness. The concept of green chemistry finds application in several material syntheses such as organic, inorganic, and coordination materials and nanomaterials. One of the different goals pursued in the field of materials science is the application of GC for producing sustainable green polymers and membranes. In this context, extremely relevant is the application of green chemistry in the production of imprinted materials by means of its combination with molecular imprinting technology. Referring to this issue, in the present review, the application of the concept of green chemistry in the production of polymeric materials is discussed. In addition, the principles of green molecular imprinting as well as their application in developing greenificated, imprinted polymers and membranes are presented. In particular, green actions (e.g., the use of harmless chemicals, natural polymers, ultrasound-assisted synthesis and extraction, supercritical CO2, etc.) characterizing the imprinting and the post-imprinting process for producing green molecularly imprinted membranes are highlighted.

Polydopamine-based multilevel molecularly imprinted nanocomposite membranes comprising metal organic frameworks for selective recognition and separation

Molecularly imprinted nanocomposite membranes with three-dimensional metal-organic frameworks (MOFs)-based structure (MINMs-TM) were successfully prepared by using propranolol as template molecule. Importantly, for the first time, polycarbonate track etch membranes had been used as the supporting surfaces to construct the polydopamine (PDA)-induced MOFs composite structure, in which the as-prepared PDA-modified surface would promote the crystallization and nucleation of ZIF-8-based composite layer. Based on the entire preparation processes of our design, the as-prepared PDA-induced ZIF-8-modified surfaces could be regarded as the imprinted-initiated units of sol-gel imprinting polymerization. Abundant recognition sits of propranolol were achieved in MINMs-TM, which showed characteristic properties of permeability and selectivity. Therefore, high adsorption capacity (41.31 mg/g) and fast adsorption equilibrium rate (within 30 min) had been successfully achieved. Meanwhile, excellent permselectivity rates (β) of MINMs-TM toward propranolol were also obtained as 5.04, 4.79 and 5.14, which MINMs-TM the successful synthesis of high-affinity and high-density propranolol-imprinted sites. Overall, for the practical selective separation and scalability, we had successfully MINMs-TM the preparation of MINMs-TM-based to selective rebinding and separation of propranolol from complex solution system and mimetic water sample, which had further confirmed the desired and potential applications of many environmental pollutants.

Plasmon-Enhanced Electrochemiluminescence of PTP-Decorated Eu MOF-Based Pt-Tipped Au Bimetallic Nanorods for the Lincomycin Assay

Plasmonic bimetal nanostructures can be employed to amplify electrochemiluminescence (ECL) signals. In this work, a high-performance ECL platform was constructed using a europium metal-organic framework (MOF) as a luminophore and Au-Pt bimetallic nanorods (NRs) as a plasma source. Due to the SPR effect of Au-Pt NRs, the aptasensor exhibits 2.6-fold ECL intensity compared to that of pure polyaniline (PANI)-decorated perylene tetracarboxylic dianhydride (PTCA)/Eu MOF. Moreover, decoration with PTP greatly enhances the conductivity and stability of Eu MOF, resulting in sizeable plasmon-enhanced electrochemical luminescence. The as-designed plasmon-enhanced ECL aptasensor displayed highly sensitive detection for lincomycin (Lin). The as-proposed aptasensor could quantify Lin from 0.1 mg/mL to 0.1 ng/mL with a limit of detection (LOD) of 0.026 ng/mL.

Zr-based metal organic framework nanoparticles coated with a molecularly imprinted polymer for trace diazinon surface enhanced Raman scattering analysis

In this study, a new surface imprinted polymer of type MOFs-MIPs was synthesized with diazinon as template and Zr-based metal organic framework (UiO-67) as matrix for trace diazinon surface enhanced...

Dual-imprinted organic/inorganic nanocomposite membranes with highly selective polydopamine-intimated nanostructures for pharmaceutically active compound separation

Here, the graphene oxide (GO)/SiO₂-loaded dual-imprinted membranes (GS-DIMs) were constructed based on the self-polymerization imprinting technique of dopamine, in which a twice polydopamine (PDA)-based imprinting strategy had been successfully developed to obtain the three-dimensional nanocomposite membrane-based separation system. Meanwhile, the pollution-intensive antibiotics of tetracycline (TC) was used as template molecule throughout the GS-DIMs synthesis, and the dopamine molecules were simultaneously used as functional monomer and cross-linking agent during the twice polydopamine (PDA)-based imprinting processes. Therefore, dual-TC-imprinted sites had been prepared based on the as-designed dual imprinting processes, the as-prepared GS-DIMs-based separation system with dual-TC-imprinted structures could not only allow for the largely enhanced rebinding result of 65.61 mg/g and faster adsorption equilibrium rate within 20 min, but also facilitate the permselectivity performance from TC-based complex separation system and mimetic water sample. Importantly, we demonstrated the applications and effects of the dual-imprinted membrane-based separation materials to selective rebinding and separation of TC from complex solution systems and mimetic water samples. The as-obtained permselectivity factors (β) around 4.0 strongly illustrated the efficiently selective separation ability and high-intensitive recognizability of TC than any other non-template molecules based on our GS-DIMs-based separation system. Overall, the as-designed GS-DIMs had great potential for selective separation applications and provided critical comparisons based on the as-achieved excellent rebinding and permselectivity performance, which encompassed innovative GO/SiO₂-loaded nanocomposite and PDA-based dual-TC-imprinted system.

Novel Molecular Organic Framework Composite Molecularly Imprinted Nanofibrous Membranes with a Bioinspired Viscid Bead Structure for Selective Recognition and Separation of Atrazine

In this work, novel atrazine (ATZ) molecularly imprinted nanofibrous membranes (A-MNMs) with a molecular organic framework (MOF)-based viscid bead structure were developed based on a natural spider-web-inspired strategy for selective separation of ATZ. Poly(vinylidene fluoride)/poly(vinyl alcohol) (PVDF/PVA) blended nanofibrous membranes as the basal membrane were synthesized by electrospinning technology combined with a chemical cross-linking procedure. The most critical design is that MOF nanocrystals as the matrix of the viscid bead structure were assembled on the PVDF/PVA blended nanofibrous membrane surface and the specific recognition sites were efficiently constructed on the surface and pores of the MOF-based viscid bead structure by a surface imprinting strategy. Significantly, the as-synthesized MOF-based viscid bead structure has an enhanced specific surface area, which helps to form abundant specific recognition sites in A-MNMs. Therefore, the A-MNMs with a spider-web-like structure presented an enhanced rebinding capacity (37.62 mg g^-1) and permselectivity (permselectivity factors β were 4.21 and 4.31) toward ATZ. Moreover, the A-MNMs display strong practicability in separation of ATZ from simulated environmental water samples. The presented work has shown tremendous potential for preparing natural spider-web-like molecularly imprinted membranes (MIMs) for selective separation of environment pollutants.

Three-dimensional macroporous wood-based selective separation membranes decorated with well-designed Nd(III)-imprinted domains: A high-efficiency recovery system for rare earth element

Three-dimensional (3D) basswood materials, for the first time, were successfully used for the construction of rare-earth Nd(III)-imprinted nanocomposite membranes. Herein, polydopamine (PDA)-modified layers could be initially synthesized on basswood surfaces. After the double-bonded modification procedure, the 3D wood-based ionic imprinted membranes (3DW-IIMs) system was finally accomplished by developing a re-modified two-step-temperature free radical polymerization process. The as-design PDA@basswood surface structure was first proposed and applied as imprinting-initiated factors for the preparation of Nd(III)-imprinted sites. Importantly, excellent rebinding capacity (120.87 mg g^-1), adsorption kinetics and permselectivity coefficients (more than 10) were achieved successfully. Furthermore, an important research result had also been found that the PDA-modified layers caused significant promotions to the rebinding capacities of the as-prepared 3DW-IIMs, that is to say, more and more Nd(III)-imprinted sites could be synthesized because of the PDA-modified surfaces. The as-obtained selective rebinding and separation results together with the green natural wood-based materials strongly demonstrated that our synthesis methodology of 3DW-IIMs had great potential for applications in various fields of rare earth separation, chemical industry, and environment protection.

Freestanding flexible molecularly imprinted nanocomposite membranes for selective separation applications: an imitated core–shell PEI@SiO2-based MIM design

The development of molecularly imprinted membranes (MIMs) has promoted applications of membrane-based separation technology, which has shown considerable advantages in water treatment, chemical separation and drug purification.