Laccase-catalyzed conjugation of potato protein (PPT) with selected pectic polysaccharides (PPS): Conjugation efficiency and emulsification properties

Recent advances in nutraceutical delivery systems constructed by protein-polysaccharide complexes: A systematic review

Most nutraceuticals have low stability and solubility, making it difficult to achieve ideal bioavailability by directly incorporating into food. Therefore, constructing delivery systems to protect nutraceuticals is an essential strategy. Proteins and polysaccharides have become ideal materials for encapsulating nutraceuticals due to their superior nutritional value, edible safety, and physicochemical properties. This review first introduces the binding methods of protein-polysaccharide complexes and analyzes their respective merits, defects, and applications. Then, various protein-polysaccharide complex-based nutraceutical delivery systems are systematically summarized, including emulsions, gels, nanoparticles, microcapsules, complexes, and films, which can improve the stability, encapsulation efficiency, and bioaccessibility of nutraceuticals. In addition to traditional globular proteins mentioned in previous reviews, this review also introduces the advantages of another morphology of proteins (protein fibrils with linear structure) in the formation of protein-polysaccharide complexes and the construction of nutraceutical delivery systems. Next, the affecting factors are analyzed to achieve the precise control of protein-polysaccharide complex-based nutraceutical delivery systems. To improve public acceptability of protein-polysaccharide complex-based nutraceutical delivery systems, the safety and regulatory aspects are also discussed in detail. Moreover, the applications of such delivery systems are presented, including dietary supplements, food ingredients, food packaging, and food detection. Finally, several promising research directions that had not been provided before are innovatively proposed, including cell-cultured meat scaffolds, plant-based meat analogs, three-dimensional printing inks, and "three reductions" foods. Overall, this review provides guidance for designing protein-polysaccharide complex-based nutraceutical delivery systems with customized nutrition and superior bioavailability.

The emulsifying capacity and stability of potato proteins and peptides: A comprehensive review

The potato has recently attracted more attention as a promising protein source. Potato proteins are commonly extracted from potato fruit juice, a byproduct of starch production. Potato proteins are characterized by superior techno-functional properties, such as water solubility, gel-forming, emulsifying, and foaming properties. However, commercially isolated potato proteins are often denatured, leading to a loss of these functionalities. Extensive research has explored the influence of different conditions and techniques on the emulsifying capacity and stability of potato proteins. However, there has been no comprehensive review of this topic yet. This paper aims to provide an in-depth overview of current research progress on the emulsifying capacity and stability of potato proteins and peptides, discussing research challenges and future perspectives. This paper discusses genetic diversity in potato proteins and various methods for extracting proteins from potatoes, including thermal and acid precipitation, salt precipitation, organic solvent precipitation, carboxymethyl cellulose complexation, chromatography, and membrane technology. It also covers enzymatic hydrolysis for producing potato-derived peptides and methods for identifying potato protein-derived emulsifying peptides. Furthermore, it reviews the influence of factors, such as physicochemical properties, environmental conditions, and food-processing techniques on the emulsifying capacity and stability of potato proteins and their derived peptides. Finally, it highlights chemical modifications, such as acylation, succinylation, phosphorylation, and glycation to enhance emulsifying capacity and stability. This review provides insight into future research directions for utilizing potato proteins as sustainable protein sources and high-value food emulsifiers, thereby contributing to adding value to the potato processing industry.

Screening of Lactic Acid Bacteria Strains for Potential Sourdough and Bread Applications: Enzyme Expression and Exopolysaccharide Production

Twenty-eight strains of lactic acid bacteria (LAB) were characterized for the ability to express enzymes of interest (including protease, xylanase, α-amylase, laccase, and glucose oxidase) as well as the ability to produce exopolysaccharide (EPS). The screening of enzyme capability for all LAB strains proceeded in a progressive 3-stage manner that helps to profile the efficiency of LAB strains in expressing chosen enzymes (Stage 1), highlights the strains with affinity for flour as the substrate (Stage 2), and discerns strains that can adapt well in a simulated starter environment (Stage 3). The theoretical ability of LAB to express these enzymes was also assessed using Basic Local Alignment Search Tool (BLAST) analysis to identify the underlying genes in the whole genome sequence. By consolidating both experimental data and information obtained from BLAST, three LAB strains were deemed optimal in expressing enzymes, namely, Lb. delbrueckii subsp. bulgaricus (RBL 52), Lb. rhamnosus (RBL 102), and Lb. plantarum (ATCC 10241). Meanwhile, EPS-producing capabilities were observed for 10 out of 28 LAB strains, among which, Lactococcus lactis subsp. diacetylactis (RBL 37) had the highest total EPS yield (274.15 mg polysaccharide/L culture) and produced 46.2% polysaccharide with a molecular mass of more than 100 kDa.

Characterization of levans produced by levansucrases from Bacillus amyloliquefaciens and Gluconobacter oxydans: Structural, techno-functional, and anti-inflammatory properties

Levans of different structures and molecular weights (MW) can display various techno-functional and health-promoting properties. In the present study, selected levans were produced by the transfructosylation of sucrose catalyzed by levansucrases from Bacillus amyloliquefaciens and Gluconobacter oxydans, and their structural, techno-functional and anti-inflammatory properties were investigated. NMR and methylation/GC analysis confirmed the structure of β-(2, 6) levans. The structural characterization led to the classification of levans as high MW (HMW, ≥100 kDa), low MW (LMW, ≤20 kDa) and mix L/HMW ones. Levan with higher MW had more linear fructosyl units with fewer reducing ends and branching residues. LMW levan showed the highest foaming capacity and stability while HMW levan had the highest emulsion stability. HMW and mix L/HMW levans showed comparable water and oil-holding capacities, which were higher than LMW. HMW and mix L/HMW levans were found to have gelling properties at low concentrations. The rheological behaviour of HMW levan-based gel was a more viscous-like gel, while that of mix L/HMW levan-based one showed more elastic solid like-gel. The temperature also influenced the rheology of levan, showing that the mix L/HMW levan gel network was the most thermal stable as its viscoelasticity remained constant at the highest temperature (75 °C). Studies on the biological activity of levans of HMW and LMW revealed in-vitro anti-inflammatory properties as they significantly reduced the production of LPS-triggered pro-inflammatory cytokines in differentiated Caco-2 cells.

Improving method, properties and application of polysaccharide as emulsifier

At present, there are still some problems for the emulsification of polysaccharides such as lack of green, efficient and industrialized methods, lack of systematic and in-depth structure-activity relationship, and need of expanding its application scope. The physical, chemical and biological methods for improving the emulsifying of polysaccharides, the emulsifying properties and influencing factors of polysaccharides and application in food were reviewed herein. It was pointed out that the future research should focus on the effect of physical-biological synergistic function on the emulsification of polysaccharides, the effect of processing process on the structure and emulsification mechanism of polysaccharides, and further expanding the application field of polysaccharides with emulsification activity to improve the quality of products.

Modified Rhamnogalacturonan-Rich Apple Pectin-Derived Structures: The Relation between Their Structural Characteristics and Emulsifying and Emulsion-Stabilizing Properties

In the context of the increasing interest in natural food ingredients, the emulsifying and emulsion-stabilizing properties of three rhamnogalacturonan-rich apple pectin-derived samples were assessed by evaluating a range of physicochemical properties. An apple pectin (AP74) was structurally modified by a β-eliminative reaction to obtain a RG-I-rich pectin sample (AP-RG). Subsequent acid hydrolysis of AP-RG led to the generation of pectin material with partially removed side chains (in particular arabinose depleted) (AP-RG-hydrolyzed), thus exhibiting differences in rhamnose, arabinose, and galactose in comparison to AP-RG. All samples exhibited surface activity to some extent, especially under acidic conditions (pH 2.5). Furthermore, the viscosity of the samples was assessed in relation to their emulsion-stabilizing properties. In a stability study, it was observed that the non-degraded AP74 sample at pH 2.5 exhibited the best performance among all the apple pectin-derived samples evaluated. This emulsion presented relatively small oil droplets upon emulsion production and was less prone to creaming than the emulsions stabilized by the (lower molecular weight) RG-I-rich materials. The AP-RG and AP-RG-hydrolyzed samples presented a slightly better emulsion stability at pH 6.0 than at pH 2.5. Yet, neither pectin sample was considered having good emulsifying and emulsion-stabilizing properties, indicated by the presence of coalesced and flocculated oil droplets.

Combining phenolic grafting and laccase-catalyzed cross-linking: Effects on structures, technofunctional properties and human immunoglobulin E binding capacity of egg white proteins

The efficiency of laccase-catalyzed protein cross-linking can be impacted by substrate protein structure and competing reactions. In this study, chemical grafting of ferulic acid (FA) on protein surface was applied to modulate the cross-linking of two inflexible globular proteins, lysozyme (LZM) and ovalbumin (OVA). The extent of FA-grafting was positively correlated with protein cross-linking extent, and determined the molecular weight profile and structures of the cross-linked product. While laccase-catalyzed reactions (with or without free FA mediator) did not lead to evident cross-linking of the native proteins, oligomeric (up to 16.4%), polymeric (up to 30.6%) FA-LZMs and oligomeric FA-OVA (5.1-31.1%) were obtained upon the enzymatic treatments. The cross-linking on the grafted FA sites occurred mainly through the formation of 8-5'-noncyclic-dehydro-diferulic linkages. The effects of investigated cross-linking approach on the emulsifying, foaming properties and the immunoglobulin E (IgE) binding capacity of LZM and OVA were also evaluated in relation to the structural properties of cross-linked proteins.