Two-dimensional self-assembled Au-Ag core-shell nanorods nanoarray for sensitive detection of thiram in apple using surface-enhanced Raman spectroscopy

Plasmonic Porous ZIF-8/Au NPs Platforms: A Complex Matrix Enhances SERS Substrate for Micromolar-Trace Detection of Several Analytes

Surface-enhanced Raman scattering (SERS) is an advantageous method for organic chemical and biological sensing. Benzoic acid, benzisothiazolinone, and thiram are common model compounds used to study the interaction of toxic substances with metal surfaces using SERS spectroscopy. Metal-organic frameworks, with their high porosity and large surface area, have recently received a lot of attention in sensing applications. Plasmonic porous structures are promising SERS substrates because of their high broadband charge-transfer resonance and reproducibility of fabrication. Furthermore, the exceptional enhancement of the electromagnetic field makes plasmonic nanomaterials ideal SERS substrates. In this study, we developed SERS substrates based on ZIF-8/Au NPs through a self-assembly process that forms stacked layers. The ZIF-8/Au NPs substrate demonstrated a remarkable ability to enhance Raman scattering, enabling ultrasensitive detection of various target molecules at micromolar concentrations. These attributes establish it as a promising SERS substrate for biosensing applications.

Rapid detection of thiram on apple surfaces using a flexible and sticky SERS substrate coupled with chemometric methods

In this paper, we developed a simple, rapid and sensitive method for detection of thiram on apple surfaces by surface enhance Raman spectroscopy (SERS) combined with chemometric methods. Ag NCs (Ag nanocubes) were firstly prepared by a sulfide-mediated polyol method. Then the flexible and adhesive Ag NCs@PDMS substrates were obtained by combining Ag NCs self-assembled films with PDMS films. Thiram residues on apple surfaces were transferred to the substrate using adhesion properties of Ag NCs@PDMS. And the SERS spectra were obtained by Raman microscopy and analyzed with chemometric methods. The results were analyzed by principal component analysis (PCA), for the limit of detection (LOD) of thriam on apple surfaces was 0.01 ppm. Principal component regression (PCR) and partial least squares regression (PLSR) were explored to develop quantitative models. Both models represented higher correlation coefficients (close to 1), but PLSR models exhibited better predictive performance, with the correlation coefficient was 0.99282 with a low root mean squared error of calibration (RMSEC = 0.438) and root mean squared error of validation (RMSECV = 0.597). The developed SERS method based on Ag NCs@PDMS substrate provide a simpler and more sensitive way to monitor thiram on apple surfaces.

Bimetallic coreshell nanorods with thioglycolic acid monolayer for highly sensitive and rapid SERS detection of thiabendazole and ziram residues in Prunus Persica peaches

Simultaneous assessment of agrochemical residues in agricultural entities is crucial for ensuring food safety and protecting consumer health. A highly sensitive and stable thioglycolic acid (TGA) based surface modified coreshell nanorod (Au@Ag@TGANR) arrays were developed for simultaneous fungicide detection in peach samples. The developed Au@Ag@TGANRs exhibited superior surface enhance Raman scattering (SERS) performance, enabling the simultaneous examination of ziram (ZIR) and thiabendazole (TBZ) residues in peach samples with detection limits as low as 0.003 and 0.028 ppm and high R2 values of 0.996 and 0.995, for ZIR and TBZ, respectively. Good recoveries of 86.2 to 108.6 % and 80.2 to 105.7 % were also achieved for peach samples, highlighting the effectiveness of the established protocol for accurate and reliable detection of pesticides in fruits. These results suggest that the proposed method could be a valuable addition to current food safety protocols, with potential application in investigating toxic residues in agricultural entities.

Elevating electron transfer of recyclable SERS sensor using AuNPs/TiO2/Ti3C2 heterostructures for detection of malachite green in sunfish

Malachite green (MG)-contaminated aquatic products pose a serious threat to animal and human health. Hence, a novel recyclable surface-enhanced Raman scattering (SERS) substrate based on AuNPs/TiO2/Ti3C2 heterostructures was developed for the detection and degradation of MG in aquatic products. Specifically, AuNPs/TiO2/Ti3C2 heterostructures were synthesized by in situ oxidation and electrostatic adsorption based on Ti3C2 nanosheets. The excellent photocatalytic and SERS performance of the AuNPs/TiO2/Ti3C2 was demonstrated by Density functional theory (DFT) calculations and experimental results, which was attributed to the enhancement of charge transfer (CT) after the formation of heterostructures. The results demonstrate that AuNPs/TiO2/Ti3C2 is highly sensitive and recyclable. The detection limit of the sensor for MG is 8.91 × 10-5 mg/L. The sensor can be recycled for five times under the condition of light, and shows satisfactory self-cleaning performance in the food matrix, providing a possible alternative solution for the recyclable detection of MG.

Self-calibrated paper-based nanoarrays for background-free quantitative detection of pesticides using self-assembly and mask-assisted techniques

Flexible surface-enhanced Raman scattering (SERS) has received considerable attention in the field of rapid analysis. However, obtaining accurate quantitative SERS results remains challenging. Here, we develop a SERS sensor based on self-assembly and mask-assisted techniques for the precise transfer of Au@PB@Ag nanoarrays onto filter paper. Prussian blue (PB) as an internal standard (IS) is used to calibrate the fluctuations in the SERS signal induced by the microstructure of the filter paper, and can generate a local plasmon resonance under a Raman laser at a wavelength of 633 nm, which enables a dual electromagnetic enhancement of the internal self-calibration and external target molecule signals. The SERS substrate has a low limit of detection of 3.96 × 10-9, a uniformity relative standard deviation (RSD) of 9.94 % (16.85 % uncalibrated), a repeatability RSD of 9.43 % (31.2 % for Au@Ag NPs), and remains stable for more than 45 days. Thiram and thiabendazole in fruit juices can be quantitatively detected using patterned transfer monolayer arrays with a common dropper. The R2 coefficients of the pesticide concentration and Raman intensity fitting curves improved from 0.9659 and 0.9499 to 0.9976 and 0.9928, respectively. Thus, paper-based Au@PB@Ag nanoarrays have facilitated the development of SERS technology for practical applications.

l-Cysteine-Modified Carbon Dots Derived from Hibiscus rosa-sinensis for Thiram Pesticides Identification on Edible Perilla Leaves

In this work, environmentally friendly fluorescent carbon dots (C-dots) were developed for the purpose of thiram identification in the leaves of perilla plants. Powdered plant petals from Hibiscus rosa-sinensis were hydrothermally combined to create C-dots. Analytical techniques, such as scanning electron microscopy, energy dispersive X-ray spectroscopy, high resolution transmission electron microscopy, Raman spectroscopy, ultraviolet spectroscopy, Fourier transmission infrared spectroscopy, and photoluminescence were employed to examine the properties of C-dots. To enhance their functionality, an l-cysteine dopant was added to the C-dots. Since this process produces highly soluble C-dots in water, it is simple, inexpensive, and safe. The excitation process and the size of the blue luminescent C-dots both affect their photoluminescent activity. Furthermore, thiram in aqueous solutions was effectively identified by using the generated C-dots. Additionally, the ImageJ program was used to measure the colors red, green, and blue. High-resolution TEM (HR-TEM) revealed that the l-cysteine-doped carbon dots had an average particle size of 2.208 nm. Additionally, the lattice fringes observed in the HRTEM image showed a d-spacing of around 0.285 nm, which nearly corresponds to the (100) lattice plane of graphitic carbon. A Raman spectrum study was also performed to investigate the relationship between carbon dots and pesticides in the actual samples. In the end, thiram levels in perilla leaves with nondoped and doped C-dots could be distinguished with 100% accuracy using the constructed partial least-squares discriminant analysis machine learning model. The information gathered therefore demonstrated that the synthetic C-dots successfully and efficiently provide rapid and sensitive detection of hazardous pesticides in edible plant products.

Carbon dots-based stimuli-responsive hydrogel for in-situ detection of thiram on fruits and vegetables

Stimuli-responsive hydrogel possesses a strong loading capacity to embed luminescent indicators for constructing food safety sensors, which are suitable for field application. In this work, a fluorescent hydrogel sensor was fabricated by incorporating Ag+-modified carbon dots (CDs-Ag+) into a sodium alginate (SA) hydrogel for in-situ detection of thiram. The fluorescence of CDs was quenched due to the combined effects of electrostatic adsorption and electron transfer between Ag+ and CDs. The formation of an AgS bond between thiram and Ag+ facilitates the release of CDs, causing subsequently fluorescence recovery. Combined with smartphone and analysis software, the fluorescence color change of the hydrogel sensor was converted into data information for quantitative detection of thiram. Such a sample-to-result step is completed within 10 min. Notably, the in-situ detection experiment of thiram in fruit and vegetable samples confirmed the practical application of the hydrogel sensor. Therefore, the hydrogel sensor provides a new research direction for the in-situ detection of pesticide residues in the monitoring of food safety.

Surface-enhanced Raman scattering based on noble metal nanoassemblies for detecting harmful substances in food

Residues of harmful substances in food can severely damage human health. The content of these substances in food is generally low, making detection difficult. Surface-enhanced Raman scattering (SERS), based on noble metal nanomaterials, mainly gold (Au) and silver (Ag), has exhibited excellent capabilities for trace detection of various substances. Noble metal nanoassemblies, in particular, have extraordinary flexibility and tunable optical properties, which cannot be offered by single nanoparticles (NPs). These nanoassemblies, with their various morphologies synthesized using NPs through artificially induced self-assembly or template-driven preparation, can significantly enhance the local electric field and create "hot spots" due to the gaps between adjacent NPs. Consequently, the SERS properties of NPs become more prominent, leading to improved performance in the trace detection of various substances and detection limits that are considerably lower than the current relevant standards. Noble metal nanoassemblies show promising potential in ensuring food safety. This review discusses the synthesis methods and SERS properties of noble metal nanoassemblies and then concentrates on their application in detecting biotoxins, drug residues, illegal additives, and heavy metals. The study provides valuable references for further research into the application of nanoassemblies in food safety detection.

SERS detection of thiram using a 3D sea cucumber-like composite flexible porous substrate

Nowadays, trace detection of thiram is in urgent demand due to its widespread application in agriculture and significant harmful effects on public health. In this work, a three-dimensional (3D) sea cucumber-like flexible porous surface-enhanced Raman scattering (SERS) substrate composed of a poly(vinylidene fluoride) (PVDF) membrane, ZnO nanorods, gold films, and Ag nanoparticles (Ag/Au/ZnO/P) has been established for the highly sensitive detection of thiram. The substrate takes advantage of the 3D morphology of the Ag/Au/ZnO system on a flexible porous PVDF membrane to produce abundant plasmonic hot spots. Meanwhile, the employment of an AgNPs/Au shell system combined the benefits of both gold and silver metals, thus guaranteeing stable and sensitive detection. With 4-mercaptobenzoic acid (4-MBA) as a probe molecule, the Ag/Au/ZnO/P substrate exhibited excellent linear detection in the range of 10-11-10-5 M, with a correlation coefficient (R2) of 0.99 and an enhancement cofactor of 7.09 × 107. The substrate exhibited excellent uniformity with a related standard deviation (RSD) value of 3.82% and demonstrated high stability during a 15 d-storage test. In addition, the substrate could detect thiram in an aqueous solution at concentrations as low as 10-10 M with excellent selectivity. Meanwhile, thiram on the surface of apple peel could be easily detected by the Ag/Au/ZnO/P substrate with the "paste-and-peel" method in less than 10 s, and the detection limit could be as low as 0.48 ng cm-2. Overall, the remarkable performance of the Ag/Au/ZnO/P SERS substrate demonstrated its great potential for the environmental monitoring of thiram.

Extralong hot-spots sensor for SERS sensitive detection of phthalate plasticizers in biological tear and serum fluids

Phthalate plasticizers (PAEs) illegally used in food pose a great threat to human health. A new and efficient sensing platform for the sensitive detection of the PAE residues in biological fluids needs to be designed and developed. Here, we report a simple and reliable surface-enhanced Raman spectroscopy (SERS) active platform with extralong hot spots of Au nanobipyramids@Ag nanorods (Au NBPs@Ag NRs) for the rapid and sensitive detection of PAEs in biological fluids. To achieve high activity, Au NBPs@Ag NRs with different shell lengths were fabricated by controlling the synthesis conditions, and the corresponding SERS properties were investigated by using crystal violet (CryV) and butyl benzyl phthalate (BBP). The experimental results showed that a longer shell length correlated to greater Raman activity, which was confirmed by finite-difference time-domain (FDTD) electromagnetic simulation. More importantly, the extralong hot spots of the Au NBPs@Ag NR SERS-active substrate showed excellent homogeneity and reproducibility for the CryV probe molecules (6.21%), and the detection limit was 10-9 M for both BBP and diethylhexyl phthalate (DEHP). Furthermore, through the standard addition method, an extralong hot spots SERS substrate could achieve highly sensitive detection of BBP and DEHP in serum and tears fluids, and the detection limit was as low as 3.52 × 10-8 M and 2.82 × 10-8 M. Therefore, the Au NBPs@Ag NR substrate with an extraordinarily long surface is efficient and versatile, and can potentially be used for high-efficiency sensing analysis in complex biological fluids.

Portable Hadamard-Transform Raman Spectrometer: A Powerful Analytical Tool for Point-of-Care Testing

A portable Hadamard-transform Raman spectrometer with excellent performance was fabricated consisting of a 785 nm laser, an optical filter, an optical system, a control system, and a signal processing system. As the core of the spectrometer, the optical system was composed of a slit, collimator, optical grating, reflector, digital micromirror devices (DMD), lens system, and InGaAs photodetector. Compared with a conventional dispersive Raman spectrometer, the proposed Raman spectrometer adopted the DMD and corresponding controlling device (DLPC350 control chip) to collect the Raman spectrum. Thus, in our design, the gratings are fixed, while the full Raman spectrum was collected by the deflection of the micromirror. This design can greatly improve the vibration resistance ability of the spectrometer since the gratings are not rotating during the spectrum collecting. More importantly, Hadamard-transform was used as signal processing technology, which has the ability of faster calculation, the merits of high energy input, single detector multichannel simultaneous detection (imaging) ability, and high signal-to-noise ratio (SNR). Hence, the Hadamard-transform portable Raman spectrometer has the potential to be applied in the field of point-of-care testing (POCT).

Cyclodextrin encapsulation enabling the anticancer repositioning of disulfiram: Preparation, analytical and in vitro biological characterization of the inclusion complexes

Drug repositioning is a high-priority and feasible strategy in the field of oncology research, where the unmet medical needs are continuously unbalanced. Disulfiram is a potential non-chemotherapeutic, adjuvant anticancer agent. However, the clinical translation is limited by the drug's poor bioavailability. Therefore, the molecular encapsulation of disulfiram with cyclodextrins is evaluated to enhance the solubility and stability of the drug. The present work describes for the first time the complexation of disulfiram with randomly methylated-β-cyclodextrin. A parallel analytical andin vitrobiological comparison of disulfiram inclusion complexes with hydroxypropyl-β-cyclodextrin, randomly methylated-β-cyclodextrin and sulfobutylether-β-cyclodextrin is conducted. A significant drug solubility enhancement by about 1000-folds and fast dissolution in 1 min is demonstrated. Thein vitrodissolution-permeation studies and proliferation assays demonstrate the solubility-dependent efficacy of the drug. Throughout the different cancer cell lines' characteristics and disulfiram unspecific antitumoral activity, the inhibitory efficacy of the cyclodextrin encapsulated drug on melanoma (IC50 about 100 nM) and on glioblastoma (IC50 about 7000 nM) cell lines differ by a magnitude. This pre-formulation screening experiment serves as a proof of concept of using cyclodextrin encapsulation as a platform tool for further drug delivery development in repositioning areas.

Phenylboronic acid modification-based novel dumbbell-shaped Au-Ag nanorod SERS substrates for ultrasensitive detection of SO42

Based on the coordination principle of Lewis acids, a 4-mercaptophenylboronic acid (4-MPBA)-modified novel dumbbell-shaped Au-Ag nanorod (4-MPBA@DS Au-AgNR) substrate was developed, which could be combined with the surface-enhanced Raman scattering (SERS) technique to detect SO42- with high sensitivity and specificity. DS Au-AgNRs synthesized in this study with a dumbbell-shaped structure were verified by finite-difference time domain (FDTD) simulation to be capable of stimulating strong localized electromagnetic enhancement (EM) at nano-edge and gap, generating a large number of "hot spots" exhibiting excellent SERS performance. The 4-MPBA modified on its surface could specifically recognize SO42-, producing a change in the spectral peak at 1382 cm-1, thus realizing highly sensitive and specific sensing of SO42-. Under optimized conditions, this SERS sensor responded rapidly to SO42- within 2 minutes and demonstrated outstanding specificity. Calculation of the ratio of the characteristic peaks at 1382 and 1070 cm-1 (I1382/I1070) enabled the quantitative detection of SO42- in the range of 1 × 10-8-1 × 10-3 M, and the detection threshold was as low as 1 nM, which was superior to those of similar detection methods. Importantly, the utility and reliability of this SERS substrate for the determination of SO42- in actual samples were evaluated using ion chromatography as the gold standard, and there was no significant difference between the two protocols (P > 0.05), and the RSD was less than 6% with a satisfactory recovery rate (97.6-102.3%). Therefore, the present protocol has the advantages of simplicity and rapidity, high sensitivity, specificity, stability, and practicability in the determination of SO42- in aqueous solution, providing a reliable solution for tracing SO42- in the fields of food safety and environmental testing.

Recent developments and applications of surface enhanced Raman scattering spectroscopy in safety detection of fruits and vegetables

This article reviewed the latest research progress of Surface-enhanced Raman Spectroscopy (SERS) in the security detection of fruits and vegetables in recent years, especially in three aspects: pesticide residues, microbial toxin contamination and harmful microorganism infection. The binding mechanism and application potential of SERS detection materials (including universal type and special type) and carrier materials (namely rigid and flexible materials) were discussed. Finally, the application prospect of SERS in fruit and vegetable safety detection was explored, and the problems to be solved and development trends were put forward. The poor stability and reproducibility of SERS substrates make it difficult for practical applications. It is necessary to continuously optimize SERS substrates and develop small and portable Raman spectroscopy analyzers. In the future, SERS technology is expected to play an important role in human health, food safety and economy.

Inner filter effect-based upconversion nanosensor for rapid detection of thiram pesticides using upconversion nanoparticles and dithizone-cadmium complexes

Herein, we propose a method for detecting thiram based on the fluorescence inner filter effect using upconversion nanoparticles and dithizone-cadmium complexes (DZ-Cd2+). The ultraviolet absorption of DZ-Cd2+ was in the range of 480-600 nm under alkaline conditions, resulting in fluorescence quenching of the nanoparticles at 540 nm. Thiram had a stronger coordination effect with Cd2+ than dithizone; thus, more thiram-cadmium complex (T-Cd2+) formed when thiram was added, leading to fluorescence recovery at 540 nm. The standard thiram curve was found to have a detection limit of 6.75 ng/mL in the linear range of 0.01-1000 µg/mL. In addition, high-performance liquid chromatography results for detecting thiram in apple samples revealed good application performance. The results demonstrate that the developed method has great potential to detect thiram residues in food.

Analyte-induced laccase-mimicking activity inhibition and conductivity enhancement of electroactive nanozymes for ratiometric electrochemical detection of thiram

Most nanozyme-based electrochemical sensing strategies depend on the catalytic formation of electroactive substances, while the electrochemical properties of nanozymes have rarely been explored. In this study, magnetic nanoparticles encapsulated metal-organic framework served as precursors to prepare bioinspired nanozymes with both laccase-mimicking activity and electroactivity. Owing to the strong affinity between thiram (THR) and Cu(II) active sites in the nanozymes, the binding of THR inhibited nanozyme catalytic activity toward catechol (CT) oxidation and enhanced nanozyme conductivity. A lower oxidation current (ICT) of CT was accompanied by a higher oxidation signal (ICu) of Cu(II), allowing a ratiometric electrochemical response of the electroactive nanozymes toward the incoming THR. The signal ratio (ICu/ICT) displayed a good linear relationship over a THR concentration range of 10.0 nM-3.0 μM with a limit of detection of 0.15 nM, and the entire THR detection process was rapidly accomplished within 5 min. The high sensitivity and selectivity of the developed electrochemical strategy guaranteed the reliable detection of THR in fruit, vegetable, and river water samples. This study provides new insights into the development of nanozymes for electrochemical analysis.

A three-dimensional gold nanoparticles spherical liquid array for SERS sensitive detection of pesticide residues in apple

High-performance plasmonic substrates have recently attracted much research attention. Herein, a three-dimensional gold nanoparticles (AuNPs) spherical liquid array (SLA) with high "hot spots" and tunable nanometer gap by optimizing the proportion of AuNPs colloids over chloroform was synthesized based on a water-oil interfacial self-assembly strategy. The substrate demonstrated excellent surface-enhanced Raman scattering (SERS) performance using tetrathiafulvalene and rhodamine 6G (R6G) as probe molecules. With a simple extraction and soaking pretreatment process, the SLA exhibited high sensitivity for analysing triazophos on apple peels, with a limit of detection (LOD) of 0.005 µg/mL and recovery ranging from 96 to 110 %. Particularly, the chloroform produced an inherent characteristic peak at 665 cm-1, which was used as the internal standard to correct SERS signal fluctuation, leading to an improvement of the corresponding coefficient R2 from 0.97 to 0.99, thus improving the reproducibility. Therefore the SLA substrate possesses the potential for quantitative analysis of food contaminants.

Surface plasmon-assisted catalytic reduction of p-nitrothiophenol for the detection of Fe2+ by surface-enhanced Raman spectroscopy

Herein, we developed a concise, time-efficient, and high selective assay for detecting Fe2+ through its triggered surface plasmon-assisted reduction reaction of p-nitrothiophenol (PNTP) to p,p'-dimercaptoazobenzene (DMAB) on the surface of gold nanoparticles (AuNPs) based on surface-enhanced Raman scattering (SERS) spectroscopy. When Fe2+ was added to the PNTP-AuNPs system, the appearance of three characteristic peaks at 1142, 1392, and 1440 cm-1 attributed to DMAB demonstrated that Fe2+ induced the catalytic coupling reaction of PNTP. The Raman intensity ratio of the peak at 1142 cm-1 to the peak at 1336 cm-1 and the concentration of Fe2+ presented a good linear response from 10 to 100 μM with a limit of detection (LOD) of 0.35 μM. More importantly, the entire detection process can be completed within 2 min and further successfully used for the detection of Fe2+ in river water.

Ultrasensitive detection of thiram based on surface-enhanced Raman scattering via Au@Ag@Ag core/shell/shell bimetallic nanorods

We developed a highly sensitive and stable SERS-active substrate of Au@Ag@Ag core/shell/shell nanorods, formed by encapsulating Au nanorods (Au NRs) into a bilayer silver shell with Raman reporter molecules (4-mercaptobenzoic acid (4-MBA) and thiram) in the shell-shell gap. The core/shell/shell nanostructures demonstrated a high SERS enhancement and easy assembly. The important role of the bilayer silver shell in boosting the SERS intensity and detection sensitivity was revealed by comparing the performances of the Au@Ag@4-MBA@Ag NRs, Au@Ag@4-MBA NRs, and Au@4-MBA NRs. The obtained Au@Ag@4-MBA@Ag NRs exhibited a significantly promoted SERS intensity, which could reach around 2.6 times and 240 times that of the Au@Ag@4-MBA NRs and Au@4-MBA NRs, where the enhancement factor was found to be strongly correlated with the shell thickness. The controllable plasma properties and SERS effect of the Au@Ag@4-MBA@Ag NRs could be optimized by adjusting the dose of silver nitrate. The SERS substrate comprising core/shell/shell nanorods was highly reproducible and stable (retaining 83% SERS intensity after one month). Moreover, the highly sensitive detection of the pesticide thiram with a detection limit as low as 1.74 × 10-9 M was achieved by taking advantage of the great SERS response of the core/shell/shell nanostructures, which was 1-2 orders of magnitude lower than for other SERS substrates. The developed SERS substrate could be readily extended to embed other target analytes into the core/shell/shell nanostructure for novel and sensitive detection. This study could enable fresh approaches toward next-generation ultrasensitive analyte detection.

Differences between surfactant-free Au@Ag and CTAB-stabilized Au@Ag star-like nanoparticles in the preparation of nanoarrays to improve their surface-enhanced Raman scattering (SERS) performance

In this study, we assessed the controlled synthesis and efficacy of surface-enhanced Raman scattering (SERS) on two distinct types of star-like Au@Ag core-shell nanoarrays. These nanoarrays were designed based on gold nanostars (AuNSs), which were synthesized with and without CTAB surfactant (AuNSs-CTAB and AuNSs-FS, respectively). The AuNS-FS nanoparticles were synthesized via a novel modification process, which helped overcome the previous limitations in the free-surfactant preparation of AuNSs by significantly increasing the number of branches, increasing the sharpness of the branches and minimizing the adsorption of the surfactant on the surface of AuNSs. Furthermore, the differences in the size and morphology of these AuNSs in the created nanoarrays were studied. To create the nanoarrays, a three-step method was employed, which involved the controlled synthesis of gold nanostars, covering them with a silver layer (AuNSs-FS@Ag and AuNSs-CTAB@Ag), and finally self-assembling the AuNS@Ag core-shelled nanoparticles via the liquid/liquid self-assembly method. AuNSs-FS@Ag showed higher ability in forming self-assembled nanoarrays than the nanoparticles prepared using CTAB, which can be attributed to the decrease in the repulsion between the nanoparticles at the interface. The nano-substrates developed with AuNSs-FS@Ag possessed numerous "hot spots" on their surface, resulting in a highly effective SERS performance. AuNSs-FS featured a significantly higher number of sharp branches than AuNSs-CTAB, making it the better choice for creating nanoarrays. It is worth mentioning that AuNSs-CTAB did not exhibit the same benefits as AuNSs-FS. The morphology of AuNSs with numerous branches was formed by controlling the seed boiling temperature and adding a specific amount of silver ions. To compare the SERS activity between the as-prepared nano-substrates, i.e., AuNS-CTAB@Ag and AuNS-FS@Ag self-assembled nanoarrays, low concentrations of crystal violet aqueous solution were characterized. The results showed that the developed AuNSs-FS@Ag could detect CV at trace concentrations ranging from 1.0 ng mL-1 to 10 ng mL-1 with a limit of detection (LOD) of 0.45 ng mL-1 and limit of quantification (LOQ) of 1.38 ng mL-1. The nano-substrates remained stable for 42 days with a decrease in the intensity of the characteristic Raman peaks of CV by less than 7.0% after storage. Furthermore, the spiking method could detect trace amounts of CV in natural water from the Dong Nai River with concentrations as low as 1 to 100 ng mL-1, with an LOD of 6.07 ng mL-1 and LOQ of 18.4 ng mL-1. This method also displayed good reproducibility with an RSD value of 5.71%. To better understand the impact of CTAB stabilization of the Au@Ag star-like nanoparticles on their surface-enhanced Raman scattering (SERS) performance, we conducted density functional theory (DFT) calculations. Our research showed that the preparation of AuNSs-FS@Ag via self-assembly is an efficient, simple, and fast process, which can be easily performed in any laboratory. Furthermore, the research and development results presented herein on nanoarrays have potential application in analyzing and determining trace amounts of organic compounds in textile dyeing wastewater.

Liquid Interfacial Coassembly of Plasmonic Arrays and Trace Hydrophobic Nanoplastics in Edible Oils for Robust Identification and Classification by Surface-Enhanced Raman Spectroscopy

The ubiquity of micro-/nanoplastics poses a visible threat to the environment, aquatic organisms, and human beings and has become a global concern. Here, we proposed a liquid interface-based strategy using surface-enhanced Raman spectroscopy to coassemble nanoplastics and gold nanoparticles into a dense and homogeneous plasmonic array, thereby enabling the rapid and sensitive detection of trace nanoplastics. In addition, due to the uniqueness of the oil-water immiscible two-phase interface, we achieved ideal results for the detection of nanoplastics in a complex matrix (e.g., aqueous environment and edible oil) with a detection limit of μg/mL. With the aid of the principal component analysis algorithm, the differentiation and identification of multiple nanoplastic components (e.g., polystyrene, polyethylene, and polyethylene terephthalate) in aqueous environments and common hazards (e.g., Bap and Phe) in edible oil were achieved. Therefore, our self-assembled plasmonic arrays are expected to be used for monitoring environmental pollution and food safety.

Ratiometric surface-enhanced Raman scattering strategy using gold nanoparticles confined on an ultrathin polydimethylsiloxane grafted gold mirror film substrate for ferbam screening in fruit juice

BACKGROUND

In surface-enhanced Raman scattering (SERS) detection methods, the intricacies in the synthesis and recognition processes, along with non-uniform substrate morphologies, induce spectral irreproducibility. Metal (gold) nanoparticles (AuNPs) on gold (Au) mirror film configuration along with a ratiometric approach, constitute a potential system to resolve this issue.

RESULTS

To acquire a reproducible and stable SERS response, an ultrathin polydimethylsiloxane (PDMS) spacer layer was grafted onto the Au mirror film via a contact heating step. The AuNPs-supported ultrathin PDMS grafted Au mirror film system was extended for ratiometric sensing of ferbam residue in real fruit juice samples. The hydrophobic PDMS localizes the AuNPs, 4-nitrophenol probe, and ferbam to a smaller region on the PDMS-grafted Au mirror film and prevents their spreading and diffusion. The ratiometric SERS response for ferbam target and probe ratio at I1376/I1326 cm-1 was monitored on the AuNPs@PDMS grafted Au mirror film substrate with good linear fitting. A detection limit of 1.09 × 10-8 mol L-1 and a relative standard deviation of 11.90% were obtained. In addition, ferbam residues in grape and orange juice samples were successfully recovered (96.86%-99.76%).

SIGNIFICANCE

The AuNPs@PDMS grafted Au mirror film substrate, coupled with ratiometric analysis, showed excellent SERS activity with high sensitivity and reproducibility. The proposed platform can be adequately extended to detect other pesticide types in complex food settings.

Surface-enhanced Raman scattering of a gold core-silver shell-sponge substrate for detection of thiram and diquat

Aiming at the difficulty of traditional pesticide sampling, a low-cost and convenient flexible surface enhanced Raman scattering (SERS) gold core-silver shell-sponge (Au-Ag-sponge) substrate was synthesized by chemical reduction. The SERS substrate consisted of Au-AgNPs and a melamine sponge. The sponge had a rich open pore structure, which could well "capture" Au-AgNPs, generating a large number of "hot spots". The SERS enhancement activity of the flexible substrate was characterized with rhodamine 6G (R6G) Raman probe molecules. The substrate showed good activity to 10-12 M rhodamine 6G with an enhancement factor (EF) of 7.72 × 106. Applying this substrate to the qualitative and quantitative detection of pesticide residues, the results showed that the Raman intensity was well related to the concentration of pesticide solution with the range of 0.1-10 mg L-1 of thiram and 1-10 mg L-1 of diquat. Furthermore, the substrate was analyzed by finite difference time domain (FDTD) simulation and the results were in good agreement with the experimental results. The reason for the difference in Raman signals of pesticide molecules on the same substrate was the different binding modes of Au-AgNPs on the sponge. Finally, we pointed out the advantages of flexible substrates in the field of pesticide residues, as well as future opportunities and challenges.

High-Performance Au@Ag Nanorods Substrate for SERS Detection of Malachite Green in Aquatic Products

In order to improve the detection performance of surface-enhanced Raman scattering (SERS), a low-cost Au@Ag nanorods (Au@Ag NRs) substrate with a good SERS enhancement effect was developed and applied to the detection of malachite green (MG) in aquaculture water and crayfish. By comparing the SERS signal enhancement effect of five kinds of Au@Ag NRs substrates with different silver layer thickness on 4-mercaptobenzoic acid (4-MBA) solution, it was found that the substrate prepared with 100 µL AgNO3 had the smallest aspect ratio (3.27) and the thickest Ag layer (4.1 nm). However, it showed a good signal enhancement effect, and achieved a detection of 4-MBA as low as 1 × 10-11 M, which was 8.7 times higher than that of the AuNRs substrate. In addition, the Au@Ag NRs substrate developed in this study was used for SRES detection of MG in crayfish; its detection limit was 1.58 × 10-9 M. The developed Au@Ag NRs sensor had the advantages of stable SERS signal, uniform size and low cost, which provided a new tool for SERS signal enhancement and highly sensitive SERS detection method development.

HPTLC+SRES screening of pesticide for point-of-care application as shown with thiram in juice

In this study, a HPTLC-platformed SERS detection was established for screening thiram in juice. After a simple extraction, the sample liquid was separated on HPTLC plates, which resulted in a specific zone for the analyte. Following infiltration with atomize water, the band of interest was easily scraped off and eluted. In parallel, a flexible and SERS-active substrate was fabricated by the in-situ synthesis of gold nanoparticles within cotton fabrics. Under optimized conditions, fingerprint-like signal at 1376 cm^-1 of the analyte were easily recorded by a hand-held Raman spectrometer with enough LOD (0.5 mg/L), LOQ (0.9 mg/L) and reproducibility (<11.7%). The optimized screening system was further validated with pear, apple and mango juice by determining the spike-and-recovery rates (75.6 to 112.8%). It was demonstrated that this method could be a facile point-of-care testing system tailored for pesticide screening.

Cost-Effective and Facile Fabrication of a Tattoo Paper-Based SERS Substrate and Its Application in Pesticide Sensing on Fruit Surfaces

Surface-enhanced Raman spectroscopy (SERS) has been transformed into a useful analytical technique with significant advantages in relation to sensitive and low-concentration chemical analyses. However, SERS substrates are expensive and the analyte sample preparation is complicated; hence, it is only used in limited areas. We have fabricated a tattoo paper-based SERS substrate by using non-complicated inkjet printing. The sensitivity of the SERS substrate was increased by removing the carbon residues via exposure to ultraviolet light without damaging the substrate. Thus, low concentrations of pesticides (up to 1 μM thiram) were measured. The SERS substrate was attached to the curved surface of an apple to demonstrate its advantages, such as the flexibility and easy attachability of tattoo paper, and its feasibility was verified by measuring 1 μM thiram on the apple's surface. Due to its economic cost, simple usage, and rapid measurement, it will be helpful for the identification of both agricultural adulterants and food adulterants and for water-based pollutant detection. It will also possibly be helpful for medical purposes related to human body surfaces in the future.

Core-shell Au@ZIF-67-based pollutant monitoring of thiram and carbendazim pesticides

A sensitive and stable substrate plays a vital role in the Raman spectroscopic techniques as an analytical method for detecting pesticides effectively from the environment. Enhancing signals from nanoparticles are weak and inconsistent in repeatability since analytes tend to degrade quickly under laser exposure. Herein, a novel substrate of Au@ZIF-67 is prepared on octahedral AuNPs by trapping pesticide molecules with small three-dimensional volumes by the flexibility of ZIF-67 for rapid detection with high sensitivity and stability. The two types of thiram and carbendazim pesticides, which are environmental pollutants that affect biodiversity, were successfully absorbed in Au@ZIF-67 nanostructures by adsorption-desorption equilibrium for analytical purposes in Raman spectroscopy. Spectra calculations of the thiram and carbendazim molecules on 8 atoms of Au using DFT were compared with the experimental data. The SERS enhancement factors for thiram and carbendazim were estimated to be 1.91 × 10⁸ and 3.12 × 10⁸, respectively, with the LOD values of trace amounts of ∼10^-10 mol L^-1. The novel substrate of Au@ZIF-67 is a propitious platform for detecting thiram and carbendazim in trace amounts, providing a helpful strategy for detecting residues with high performance in the environment at the laboratory and practical scales.

Investigation of the adsorption of pymetrozine on the Au@AgNPs surface and its application in the rapid detection of pymetrozine residues in apple

Pymetrozine is widely used in agriculture to control pests, and its residue may pose a threat to humans. In this study, the adsorption behavior of pymetrozine on Au@AgNPs surfaces in different solutions was investigated by calculation of ACD/Labs, density functional theory, UV-vis spectra, zeta potential and surface-enhanced Raman scattering. Then, a SERS method for detection of pymetrozine residues in apples was established based on the adsorption study. The results showed that pymetrozine was adsorbed on Au@AgNPs surface in different forms in various solutions and high SERS sensitivity of pymetrozine was obtained by the synergistic effect of pymetrozine, Au@AgNPs and NaOH. A simple SERS method has been established to detect pymetrozine in apples with a LOD of 0.038 mg/kg, linear range of 0.05-1.00 mg/kg, recovery of 71.93-117.49 % and RSD low than 11.70 %. This study provides a reference for rapid detection of pymetrozine in agricultural products.

Quantitative SERS Detection of TBBPA in Electronic Plastic Based on Hydrophobic Cu-Ag Chips

Tetrabromobisphenol A (TBBPA) was one of the most widely used brominated flame retardants. However, it easily contaminates nature and harms the environment and human health during its production and use. Therefore, it is necessary to strictly control the content of TBBPA in electronics. Surface-enhanced Raman spectroscopy has the advantages of being fast and sensitive, but it is difficult to obtain the SERS spectra of TBBPA because the hydrophobic TBBPA molecule is difficult to approach with the hydrophilic surface of common noble metal SERS substrates. In the present work, a hydrophobic Cu-Ag chip was developed for the SERS detection of TBBPA. The integration of the hydrophobic interaction and the Ag-Br bonding promoted the adsorption of TBBPA on the Cu-Ag chip, allowing for SERS detection. It was observed that both the hydrophobicity and bimetallic composition of the Cu-Ag chip played important roles in the SERS detection of TBBPA. Under the optimized conditions, the low limit of detection of the established SERS method for TBBPA was 0.01 mg L^-1, within a linear range of 0.1-10 mg L^-1. Combined with ultrasonic-assisted extraction, the substrate could be used for the quantitative determination of TBBPA in electronic products. Compared with the HPLC-UV method used as a national standard, the relative error of the SERS method for quantifying the TBBPA content in a mouse cable and shell was ±3% and ±7.7%, respectively. According to the SERS results, the recovery of TBBPA in the spiked mouse shell was 95.6%.

Optoplasmonic MOFs film for SERS detection

Optoplasmonic hybrid structures composed of photonic and plasmonic elements with excellent optical properties are of great significance for the development of surface-enhanced Raman spectroscopy (SERS) substrates. In this work, the optoplasmonic hybrid structure is composed of SiO₂ microsphere and two-dimensional (2D) plasmonic- metal organic frameworks (MOF) film. Among them, the 2D plasmonic-MOF film is prepared from silver nanoparticles encapsulated by zeolitic imidazole acid framework (AgNP@ZIF-8) by self-assembly method. This optoplasmonic hybrid structure with gas adsorption properties could be used as a SERS substrate for 4-Mercaptophenol (4-MP) gas detection. Experimental data show that this substrate is dependent on the thickness of the ZIF shell and the size of the SiO₂ microspheres. In addition, it is confirmed by the electromagnetic field simulation of finite-difference time-domain method (FDTD). The optoplasmonic hybrid microstructures exhibit good uniformity for detection of 4-MP gas molecules. This work not only broadens the understanding of our optoplasmonic hybrid structure, but also has broad application prospects in SERS and gas sensing related fields.

A microfluidic chip using Au@SiO2 array-based highly SERS-active substrates for ultrasensitive detection of dual cervical cancer-related biomarkers

In this work, a microfluidic chip using Au@SiO₂ array-based highly active SERS substrates was developed for quantitative detection of squamous cell carcinoma antigen (SCCA) and carcinoembryonic antigen (CEA) associated with cervical cancer. The chip consisted of six functional units with pump-free design, enabling parallel detection of multiple samples in an automatic manner without external pumps and improving the portability. Ag nanocubes (AgNCs) were labeled with Raman reporters and coupled with antibodies (labeling) to prepare SERS tags, while the Au nanoparticle-modified SiO₂ microsphere (Au@SiO₂) array was conjugated with antibodies (coating) to generate the highly SERS-active capturing substrate. In the presence of target biomarkers, they were captured by SERS tags and capturing substrate, resulting in the formation of "sandwich" structures which were trapped in the detection chamber. As the immune reaction proceeded, a large number of "hot spots" were generated by the proximity of the Au@SiO₂ array substrate and AgNCs, greatly amplifying SERS signals. With this chip, the limits of detection of the SCCA and CEA levels in human serum were estimated to be as low as 0.45 pg mL^-1 and 0.36 pg mL^-1, respectively. Furthermore, the good selectivity and reproducibility of this chip were confirmed. Finally, clinical serum samples were analyzed by this chip, and the outcomes were consistent with those of enzyme-linked immunosorbent assay (ELISA). Thus, the proposed microfluidic chip can be potentially applied for the clinical diagnosis of cervical cancer.

Biosensor Based on Covalent Organic Framework Immobilized Acetylcholinesterase for Ratiometric Detection of Carbaryl

A ratiometric electrochemical biosensor based on a covalent organic framework (COF_Thi-TFPB) loaded with acetylcholinesterase (AChE) was developed. First, an electroactive COF_Thi-TFPB with a two-dimensional sheet structure, positive charge and a pair of inert redox peaks was synthesized via a dehydration condensation reaction between positively charged thionine (Thi) and 1,3,5-triformylphenylbenzene (TFPB). The immobilization of AChE on the positively charged electrode surface was beneficial for maintaining its bioactivity and achieving the best catalytic effect; therefore, the positively charged COF_Thi-TFPB was an appropriate support material for AChE. Furthermore, the COF_Thi-TFPB provided a stable internal reference signal for the constructed AChE inhibition-based electrochemical biosensor to eliminate various effects which were unrelated to the detection of carbaryl. The sensor had a linear range of 2.2–60 μM with a detection limit of 0.22 μM, and exhibited satisfactory reproducibility, stability and anti-interference ability for the detection of carbaryl. This work offers a possibility for the application of COF-based materials in the detection of low-level pesticide residues.

Mxenes–Au NP Hybrid Plasmonic 2D Microplates in Microfluidics for SERS Detection

Combined with microfluidics, surface-enhanced Raman spectroscopy (SERS) exhibits huge application prospective in sensitive online detection. In current studies, the design and optimization of plasmonic enhanced structures in microfluidics for SERS detection could be an interesting challenge. In this work, hybrid plasmonic 2D microplates composed of Mxenes (Ti3C2Tx) microplates and in-situ synthesized Au nanoparticles (Au NPs) are fabricated in a microchannel for enhanced structures in SERS microfluidics. Benefiting from the 2D Mxenes microplates with complex distributions, the enhanced areas generated by Au NPs are quite enlarged in a microchannel, which exhibits high sensitivity in SERS detection at 10−10 M for Nile blue (NB) molecules in microfluidics. The mechanism of electromagnetic enhancement (EM) and chemical enhancement (CM) is analyzed. The experimental data indicate the ultrasonic times of Mxenes and the concentration of Au3+ play important roles in the sensitivity of SERS detection, which is confirmed by the simulated electric field distributions. Furthermore, a typical pesticide (thiram) at 100 ppm in water is detected on these SERS microfluidics with hybrid plasmonic enhanced structures, which demonstrates that our work not only strengthens the knowledge of plasmonics but also enlarges the application of SERS.

Ag nanocubes monolayer-modified PDMS as flexible SERS substrates for pesticides sensing

A new approach is presented to fabricate flexible surface-enhanced Raman scattering (SERS) substrate of Ag nanocubes monolayer-modified polydimethylsiloxane (Ag NCs/PDMS) through a powerful three-phase interface self-assemble method. The morphologies and crystal structures were characterized by scanning electron microscopy and X-ray diffraction. The self-assembled Ag NCs/PDMS substrate exhibited high SERS activity and good signal homogeneity, which was successfully used for quantitative detection of thiram; the detection limit reached 10 ng/mL, and the linear range is 10-1000 ng/mL. Furthermore, the flexible SERS substrates were successfully employed to detect thiram residues on factual apple samples, and trace amount (1 ng/cm²) of thiram residues was detected on apple peels. The excellent SERS detection ability of self-assembled Ag NCs/PDMS substrate indicated that it will play an important role in pesticide detection in the future.

Study of the Fabrication of Gold Nanoparticle-Graphene-Arrayed Micro/Nanocavities as SERS Substrates Compared to Two Different Angles of Triangular Pyramid Tips

Surface-enhanced Raman scattering (SERS) has attracted attention because of its enormous potential to detect molecules with low concentrations. The method of fabricating SERS substrates is of great importance for improving the detection resolution. However, SERS substrates with different triangular pyramid tips fabricated by using the tip-based nanoindentation method has not been reported. Here, we prepared arrayed micro/nanocavities on copper-based graphene using the continuous indentation method with a Berkovich tip and a cube-corner tip, which have different face angles. Gold nanoparticles were then sputtered onto the graphene-copper micro/nanocavities to form the Au@GR@Cu micro/nanocavities SERS substrates. The substrates formed using the Berkovich tip and cube-corner tip were labeled B2-B9 and C2-C9, respectively, in which the numbers indicate the machining feed. Rhodamine 6G (R6G) was employed, and the Raman intensities of R6G on the differently arrayed Au@GR@Cu micro/nanocavities were measured. The Raman intensities of R6G were stronger on the pile-ups than on the inverted triangular pyramid cavities. The Raman intensities of R6G were highest on the C2 and B2 structures and lowest on the C9 and B9 structures. The Raman intensities of R6G on the arrayed Au@GR@Cu micro/nanocavities fabricated by the cube-corner tip were stronger than those on the arrayed Au@GR@Cu micro/nanocavities fabricated using the Berkovich tip with the same machining feed. In addition, the electric field intensity and distribution of the B9 and C9 arrayed Au@GR@Cu were simulated using Comsol software. Au@GR@Cu structures fabricated by the cube-corner tip were generated with higher electric field intensities. Furthermore, the relative standard deviations at 1362 cm^-1 of R6G were 6.19 and 6.62% on the C2 and C4 surfaces, respectively, showing good homogeneity. The SERS spectra of 10^-9 mol/L malachite green solution and 10^-6 mol/L carbaryl solution were recognized on the C1, C2, and C4 surfaces on day 1 and after 3 months, respectively. After storage at room temperature for 3 months, the reductions in the Raman intensities were less than 10%, indicating excellent stability. The results showed that the arrayed Au@GR@Cu micro/nanocavities fabricated using the cube-corner tip performed better than those fabricated using the Berkovich tip and exhibited excellent uniformity, availability, and stability, providing great potential for detecting pesticides at low concentrations.

Applications of surface-enhanced Raman spectroscopy in environmental detection

As the human population grows, the anthropogenic impacts from various agricultural and industrial processes produce unwanted contaminants in the environment. The accurate, sensitive and rapid detection of such contaminants is vital for human health and safety. Surface-enhanced Raman spectroscopy (SERS) is a valuable analytical tool with wide applications in environmental contaminant monitoring. The aim of this review is to summarize recent advancements within SERS research as it applies to environmental detection, with a focus on research published or accessible from January 2021 through December 2021 including early-access publications. Our goal is to provide a wide breadth of information that can be used to provide background knowledge of the field, as well as inform and encourage further development of SERS techniques in protecting environmental quality and safety. Specifically, we highlight the characteristics of effective SERS nanosubstrates, and explore methods for the SERS detection of inorganic, organic, and biological contaminants including heavy metals, pharmaceuticals, plastic particles, synthetic dyes, pesticides, viruses, bacteria and mycotoxins. We also discuss the current limitations of SERS technologies in environmental detection and propose several avenues for future investigation. We encourage researchers to fill in the identified gaps so that SERS can be implemented in a real-world environment more effectively and efficiently, ultimately providing reliable and timely data to help and make science-based strategies and policies to protect environmental safety and public health.

Process optimization for the synthesis of functionalized Au@AgNPs for specific detection of Hg2+ based on quality by design (QbD)

The current study highlights the advantages of using the quality by design (QbD) approach to synthesise and optimize SERS substrates for the detection of Hg²⁺. Considering that the performance of Au@AgNPs is affected by many factors, Plackett–Burman (PB) experimental design was used to determine the critical process parameters (CPPs) for evaluating the performance of Au@AgNPs. The quantitative relationships between the CPPs and the critical quality attributes (CQAs) were assessed by Box-Behnken Design (BBD). The optimal design space for Au@AgNPs was calculated via a Monte Carlo algorithm. Finally, detection of Hg²⁺ in the range of 1 ∼ 100 ng mL⁻¹ (R² = 0.9891) was achieved by SERS in combination with 4,4-bipyridine (Dpy) as signal molecules. The recoveries for licorice ranged from 83.53% to 92.96%. Specificity and practicality studies indicated that the method based on the QbD concept and design space not only met the optimal performance of Au@AgNPs but also improved the rapid detection of Hg²⁺ in Chinese medicine samples.

The current study highlights the advantages of using the quality by design (QbD) approach to synthesise and optimize SERS substrates for the detection of Hg²⁺.

Robotic written silver ink on photographic paper for detection of thiram residues in fruits

With the widespread application of pesticide in agriculture, pesticide residues in food have posed serious health risks to human. There is an urgent requirement to detect pesticide residues in food. In this work, a sensitive and effective method was employed to measure thiram residues in fruit using surface-enhanced Raman scattering (SERS) technique. Silver ink was written on photographic paper (AgNPs-photographic paper) directly by robotic writing technique. The AgNPs-photographic paper substrates possessed good SERS activities and high stability among four months. A good linear response between the peaks intensities and the logarithmic concentrations of thiram was obtained with the limit of detection (LOD) of 0.024 ppb. The substrates also exhibited excellent reproducibility with relative standard deviation (RSD) value less than 10% from ten different substrates. SERS mapping was tested to characterize the uniformity of AgNPs-photographic paper, and the RSD value was calculated to be 14.34% at 1377 cm^-1 measured by 120 points. The LOD values of apple and peach juice adulterated with thiram were 0.0024 and 0.024 ppm, respectively. The LOD values of thiram residues on apple and peach peels were both 0.25 ng/cm². It was demonstrated that the substrates prepared by robotic writing technique had great potential for practical application in food safety inspection.

An ultrasensitive surface-enhanced Raman scattering sensor for the detection of hydrazine via the Schiff base reaction

The development of convenient assays for the determination of hydrazine (N₂H₄) has drawn significant attention due to the high toxicity of this substance. Herein, we developed a concise, rapid and ultrasensitive surface-enhanced Raman scattering (SERS) sensor for N₂H₄ detection based on alpha-cyclodextrin-silver nanoparticles (α-CD-AgNPs) modified by 4-mercaptobenzaldehyde (4-MBA). The 4-MBA molecules can specifically capture the N₂H₄ molecules and undergo a Schiff base reaction. As a result, this induces the aggregation of nanoparticles and generates a new characteristic peak at 1529 cm^-1 that is attributed to CN and CC vibrations. Compared with noble metal nanoparticles, 4-MBA not only formed AgS bonds but could also be fixed in the cavity of cyclodextrin to produce a more stable and stronger SERS signal. The SERS intensity at 1529 cm^-1 and the logarithm of the concentration of N₂H₄ presented a good linear relationship from 10^-9 to 10^-7 M with an unprecedented limit of detection (LOD) of 38 pM. The proposed SERS sensor exhibited satisfactory selectivity and reproducibility and was applied to detect N₂H₄ in real and complex water samples. We expect this assay to be a promising alternative tool for the on-site detection of N₂H₄.

Double profound enhancements of Cu2O nano-octahedrons connected by intertwined Ag nanovines for elevating SERS activity toward ultrasensitive pesticide detection

Recently, hybrid plasmonic metal/semiconductor-based surface-enhanced Raman scattering (SERS) has attracted ever-increasing attention due to its combined characteristics of electromagnetic (EM) enhancement and chemical (CM) enhancement, holding great potential for trace molecular detection. Herein, we demonstrate an interesting heterostructure by linking Cu₂O nano-octahedrons with intertwined Ag nanovines (NVs). The obtained Ag NVs/Cu₂O heterostructures exhibit excellent SERS activity, which is about 2.7 and 7.0 times higher than that of monodispersed Ag or Au nanoparticles (NPs) modified Cu₂O. The intertwined Ag NVs among adjacent Cu₂O octahedrons serve as efficient electron transport channels, which can obviously promote the separation of electrons and holes, reduce the recombination of photogenerated carriers, and then improve the CM enhancement effect. Meanwhile, the accumulated electrons on plasmonic NVs can effectively optimize the collective oscillation of electrons and further improve the EM enhancement. The optimal SERS substrate possesses fascinating multifunctional SERS properties, including ultra-low detection limit (CV, 10^-14 M), excellent anti-interference capability and selectivity. Finally, the established nanosensor can be effectively applied for the quantitative detection of pesticide thiram molecules in soil and biological samples, with low detection limits of 0.48 ng g^-1 and 10^-7 M, respectively. The proposed work demonstrates a high-performance SERS heterostructure with both improved CM enhancement and enhanced EM effect by linking adjacent Cu₂O nano-octahedrons with Ag NVs, which is particularly suitable for ultrasensitive residual pesticide detection in real-world environment.

A universal strategy for the incorporation of internal standards into SERS substrates to improve the reproducibility of Raman signals

The uneven distribution of metal nanoparticles is a vital influencing factor in the poor uniformity of surface-enhanced Raman scattering (SERS) substrates, which is a challenge in SERS quantitative analysis. Recent reports showed that the reproducibility of a nonuniform SERS substrate can be effectively improved by the use of an internal standard (IS). However, most of these approaches require the investment of time for precise regulation, and those approaches based on the addition of an IS are specific to a certain substrate. In this work, we proposed a simple, rapid and universal method to incorporate an IS into a SERS substrate for improving the reproducibility of Raman signals based on the systematic evaluation of the influencing factors of the competitive adsorption between the IS and the target analytes. Following the proposed pressure drop-coating (PDC) method, an IS-modified gold nanobipyramids (Au NBPs)/anodic aluminum oxide (AAO) SERS substrate was fabricated within 1 min, showing high reproducibility of Raman signals. In addition, the IS-modified Au NBPs/AAO SERS substrate was successfully applied to analyze thiram in freshly squeezed apple juice and the result showed a stable Raman signal with a relative standard deviation of less than 6.00%. What is more, three different commercial SERS chips were modified with an IS molecule using the PDC method. Compared to the traditional SERS chips, the Raman signal reproducibility of the functionalized SERS chips was improved significantly. Since the addition of an IS is not based on a certain substrate, the proposed approach could be useful for all the researchers working in the field of SERS.

Self-assembled nano-Ag/Au@Au film composite SERS substrates show high uniformity and high enhancement factor for creatinine detection

Serum creatinine is a key biomarker for the diagnosis and monitoring of kidney disease. Rapid and sensitive creatinine detection is thus important. Here, we propose a high-performance nano-Ag/Au@Au film composite SERS substrate for the rapid detection of creatinine in human serum. Au nanoparticles (AuNPs) and Ag nanoparticles (AgNPs) with uniform particle size were synthesized by a chemical reduction method, and the nano-Ag/Au@Au film composite SERS substrate was successfully prepared via a consecutive layer-on-layer deposition using an optimized liquid-liquid interface self-assembly method. The finite element simulation analysis showed that due to the multi-dimensional plasmonic coupling effect formed between the AuNPs, AgNPs, and the Au film, the intensity of the local electromagnetic field was greatly improved, and a very high enhancement factor (EF) was obtained. Experimental results showed that the limit of detection (LOD) of this composite SERS substrate for rhodamine 6G (R6G) molecules was as low as 1 × 10^-13M, and the Raman EF was 15.7 and 2.9 times that of the AuNP and AgNP monolayer substrates respectively. The results of different batch tests and SERS mapping showed that the relative standard deviations of the Raman intensity of R6G at 612 cm^-1were 12.5% and 11.7%, respectively. Finally, we used the SERS substrate for the label-free detection of human serum creatinine. The results showed that the LOD of this SERS substrate for serum creatinine was 5 × 10^-6M with a linear correlation coefficient of 0.96. In conclusion, the SERS substrate has high sensitivity, good uniformity, simple preparation, and has important developmental potential for the rapid detection and application of disease biomarkers.