A review on the fate of phenolic compounds during malting and brewing: Technological strategies and beer styles

Fast and Reliable On-Site Quality Assessment of Essential Raw Brewing Materials Using MicroNIR and Chemometrics

The interest in the quality control of the raw materials, intermediates, and final products, as well as production methods, of beer has increased significantly in recent decades due to the needs and expectations of consumers. Increasing in the industrialization and globalization of beer supply chains led to a need for novel analytical tools suitable for the rapid and reliable characterization of the materials involved. In this study, an ultracompact instrument operating in the NIR region of the spectrum, microNIR, was tested for the chemical investigation of barley malts. The essential raw materials for brewing require careful control since they deeply affect the characteristic flavor and taste of the final products. Therefore, a robust prediction model able to classify base and specialty barley malts was developed starting from NIR measurements. Soft Independent Class Analogy (SIMCA) was selected as the chemometric technique for the optimization of two prediction models, and ground and sieved materials were investigated using spectroscopy. The microNIR/chemometric approach proposed in this study permitted the correct prediction of the malt samples included in the external validation set, providing false positive and false negative rates no higher than 3.41% and 0.25%, respectively, and confirming the feasibility of the novel analytical platform.

Preliminary research on the flavor substance and antioxidant capacity of beers produced with baking Qingke

The addition of baked Qingke improves the flavor profile of beer. In this study, beer was brewed using Qingke baked at various temperatures. The beer produced with Qingke baked at 180 °C achieved the highest sensory score (40/50), an alcohol content of 6.92% (v/v), a total phenolic content of 446.42 mg/L, melanoidin concentration of 98.22 g/L, a color value of 10.88 EBC, and exhibited satisfactory antioxidant activity. Analysis of volatile compounds using HS-SPME-GC-MS revealed 48 compounds, of which esters accounted for 63% and alcohols accounted for 27% of the total content. The flavor profile of the beer varied across different baking temperatures. Pyrazines and aldehydes were predominantly present in samples baked at higher temperatures (T3, T4, and T5). Correlation analysis showed that the baking flavor in the beer was primarily correlated with 2, 5-dimethyl-pyrazine, trimethyl-pyrazine, phenylacetaldehyde, and ethyl 9-decenoate (R > 0.9).

Physiological Mechanisms by Which the Functional Ingredients in Beer Impact Human Health

Nutritional therapy, for example through beer, is the best solution to human chronic diseases. In this article, we demonstrate the physiological mechanisms of the functional ingredients in beer with health-promoting effects, based on the PubMed, Google, CNKI, and ISI Web of Science databases, published from 1997 to 2024. Beer, a complex of barley malt and hops, is rich in functional ingredients. The health effects of beer against 26 chronic diseases are highly similar to those of barley due to the physiological mechanisms of polyphenols (phenolic acids, flavonoids), melatonin, minerals, bitter acids, vitamins, and peptides. Functional beer with low purine and high active ingredients made from pure barley malt, as well as an additional functional food, represents an important development direction, specifically, ginger beer, ginseng beer, and coix-lily beer, as consumed by our ancestors ca. 9000 years ago. Low-purine beer can be produced via enzymatic and biological degradation and adsorption of purines, as well as dandelion addition. Therefore, this review paper not only reveals the physiological mechanisms of beer in overcoming chronic human diseases, but also provides a scientific basis for the development of functional beer with health-promoting effects.

Impact of Lactic Acid Bacteria Fermentation Based on Biotransformation of Phenolic Compounds and Antioxidant Capacity of Mushrooms

Mushrooms contain phenolic compounds that possess health-promoting properties, including antioxidant effects. However, the low solubility and form of phenolic compounds affect their bioactivity and bioaccessibility. To overcome this limitation, our study investigates the fermentation of mushrooms to increase their free phenolic content and enhance their bioactivity. Our research focused on the impact of fermentation on both free and bound phenolic fractions (FPs and BPs, respectively) in Lentinula edodes and Lactarius deliciosus, which were successively fermented with Lactiplantibacillus plantarum LMG 17673 for 72 h. We examined the total phenolic content (TPC), phenolic profile, and antioxidant activity of both FPs and BPs. Our results showed that the TPC of BPs was higher than that of FPs in both mushrooms, with strong antioxidant capabilities. Fermentation significantly increased the TPC of FPs in both mushrooms, particularly after 24 h of fermentation. The TPC of BPs in mushrooms decreased during fermentation, indicating their release from the matrix. Additionally, we identified 30 bioactive compounds using UPLC-Q-TOF-MS/MS. Our study demonstrates for the first time that lactic acid bacteria fermentation of mushrooms with high phenolic content leads to the liberation of bound phenolics, enhancing their bioactivity and bioaccessibility.

UHPLC-PAD Protocol for the Simultaneous Identification of Polyphenols and Bitter Acids: Organoleptic and Nutraceutical Fingerprinting of Bergamot-Flavored Craft Beer

In this study, a UHPLC-PDA method for the simultaneous identification of polyphenols and bitter acids (alpha, beta, and isoalpha) in beer was developed. The resulting chemical profiles were leveraged to distinguish the characteristics of four (IPA, Lager, Blanche, ALE) bergamot-flavored beers, produced on a pilot-scale plant. In a streamlined 29 min analysis, thirty polyphenols and fourteen bitter acids were successfully identified under optimized separation conditions. Validation, encompassing parameters such as LOD (from 0.028 ppm for isorhamnetin to 0.106 for narirutin), LOQ (from 0.077 ppm for naringenin to 0.355 for narirutin), R2 (always more than 0.9992), repeatability (from 0.67% for tangeretin to 6.38% for myricetin), and reproducibility (from 0.99% for sinensetin to 6% for naringin), was conducted for polyphenol quantification using constructed calibration curves with seven levels. Exploring polyphenolic components as potential discriminators among different beer styles, a total of thirty-two polyphenolic compounds were identified and quantified, including characteristic bergamot peel polyphenols like neoeriocitrin (from 7.85 ppm for CBS2 to 11.95 ppm in CBS1); naringin (from 4.56 ppm for CBS4 to 10.96 in CBS1), and neohesperidin (from 5.93 in CBS3 to 15.95 for CBS2). The multivariate analysis provided additional insights into variations among specific beer styles, revealing discrepancies in the presence or relative concentrations of specific compounds linked to brewing ingredients and processes. This research enhances the fingerprinting of the chemistry governing beer quality through a straightforward and cost-effective analytical approach.

Effects of tea addition on antioxidant capacity, volatiles, and sensory quality of beer

Green tea has great potential to enhance the quality of beer. In this study, green tea was added at different stages of beer brewing, and evaluated the antioxidant capacity, volatile components, as well as sensory quality. The results showed that the addition of green tea during the start of boiling has great potential for application, and the green tea beer (GTB) had remarkable antioxidant properties (ABTS radical scavenging ability, 8.67 mmol TE/L; DPPH radical scavenging ability, 3.97 mmol TE/L; reducing power, 3.28 mmol TE/L), and an excellent sensory quality (acceptance, 6.09/9). HPLC analysis indicated that the principal phenolics in GTB were catechin and caffeic acid, in addition, the relative amounts of ferulic acid, gallic acid can be used to differentiate between GTB and beer. HS-SPME-GC-MS analyses showed that ethyl caprylate, ethyl nonanoate, ethyl caprate, linalool, and phenethyl alcohol were potentially significant for the aroma profile of GTB.

Identification of the chemical composition of distiller's grain polyphenols and their effects on the fecal microbial community structure

Distiller grains are the main by-products of Baijiu production and are usually discarded, ignoring their abundant functional phytochemicals. The free and bound polyphenols from distiller grains were extracted and their potential effect on modulating fecal microbiota was investigated using in vitro fecal fermentation. The results showed that 34 polyphenols were quantified from distiller grains. The antioxidant activity was positively correlated with quercetin, myricetin, epicatechin, and naringenin. The abundance of Bifidobacterium, Ruminobacterium, Lactobacillus, Akkermansia, and butyrate-producing bacteria was enhanced by distiller's grain polyphenols by approximately 10.66-, 6.39-, 7.83-, 2.59-, and 7.74-fold, respectively. Moreover, the production of short-chain fatty acids (SCFAs), especially acetic, butyric, and propionic acid, was promoted (increased 1.99-, 1.71-, and 1.34-fold, respectively). Correlated analysis revealed quercetin, daidzein, and kaempferol as the key polyphenols by analyzing the effects on gut microbiota and SCFAs. This study could provide a reference for converting distiller grains into high-nutrient functional food ingredients and feeds.

Characteristics of Oat and Buckwheat Malt Grains for Use in the Production of Fermented Foods

Malted gluten-free cereal grains and pseudo-cereals are interesting raw materials for producing fermented foods. The aim of the work was to assess selected technological quality characteristics and antioxidant properties of special malts in terms of use in the production of fermented foods. The research material consisted of malts made from oat, buckwheat, and brewing barley. Malting was performed on a microtechnical scale according to the standard scheme for brewing barley grain. The basic quality parameters of cereal grains obtained malts, and laboratory wort were assessed according to methods applicable in brewing. Atypical brewing malts were characterized by parameters such as malt extractability, protein solubilization, diastatic force, mash filtration time, and wort viscosity. The best results, comparable to barley malt, were obtained for naked oat malt. Malted buckwheat grains turned out to be the least biochemically modified, although their use in the production of beer and/or other fermented beverages is supported by the high content of bioactive substances and antioxidant potential. As the malting process of cereal plants improves their antioxidant properties and increases their nutritional value, oat and buckwheat malts can be successfully used to produce gluten-free fermented beverages or as an addition to fermented products, e.g., in baking and confectionery.

Wheat craft beer made from AFB1-contaminated wheat malt contains detectable mycotoxins, retains quality attributes, but differs in some fermentation metabolites

Levels of aflatoxin B1 (AFB1) were measured during the production of wheat craft beer made with wheat malt contaminated with AFB1 (1.23 µg/kg). A wheat craft beer made with non-contaminated wheat malt was produced for comparison purposes. AFB1 was measured after mashing (malt after the mashing process), and in spent grain (spent grains are filtered to collect the wort - remaining sugar-rich liquid), sweet wort, green beer, spent yeast, and in beer. Physicochemical parameters (pH, titratable acidity, color parameters, total soluble solids), sugars, organic acids, alcohols, and phenolics were evaluated after mashing, and in sweet wort, green beer, and beer samples. Density and yeast counts were determined over 120 h of sweet wort fermentation every 24 h. The AFB1 levels in the final beer were 0.22 µg/L, while the spent grains and spent yeasts contained 0.71 ± 0.17 and 0.11 ± 0.03 µg/kg of AFB1, respectively. AFB1 contamination did not influence the final product's physicochemical parameters, density during fermentation, fructose, or glycerol content. Higher yeast counts were observed during the first 48 h of non-contaminated wheat craft beer fermentation, with higher ethanol, citric acid, and propionic acid contents and lower glucose, malic acid, and lactic acid contents compared with beer contaminated with AFB1. Non-contaminated wheat craft beer also had higher concentrations of gallic acid, chlorogenic acid, catechin, procyanidin A2, and procyanidin B1. AFB1 contamination of wheat malt may not affect basic quality parameters in wheat craft beer but can influence the final product's organic acid and phenolic contents. Our findings show that if wheat craft beer is made with contaminated malt, AFB1 can remain in the final product and may pose a risk to consumers.

Italian Grape Ale Beers Obtained with Malvasia di Candia Aromatica Grape Variety: Evolution of Phenolic Compounds during Fermentation

Italian grape ale (IGA) beers have been categorized by the Beer Judge Certification Program as a sub-category of fruit beers in which grape, or grape must, is added during the brewing process to provide additional characteristics to the final beer. In the present work, IGA beers have been produced with must and pomace of the Malvasia di Candia Aromatica (MaCA) grape variety, which were added before fermentation at two different percentages (10% and 20%). The (poly)phenolic profile of IGA beers have been characterized with HPLC-MS/MS and compared to a golden ale control beer (produced in the same conditions without the addition of grape-derived ingredients). A series of sub-samples have been collected to monitor the (poly)phenol profile at time 0 and during the different phases of the fermentation process (1, 3, 5, 7 30, 65 days). Results demonstrated how the addition of pomace allowed to significantly enrich (p < 0.05) final beers in total (poly)phenols detected by MS, while must addition did not influence that amount if compared to the control sample. However, a PCA cluster analysis identified strong similarities among IGA beers and differentiated them to control beer samples. This study underlined how the addition of must and pomace from the MaCA grape variety improved the (poly)phenolic profile of beer from both a qualitative and quantitative point of view.

Phenolic-Degrading Enzymes: Effect on Haze Active Phenols and Chill Haze in India Pale Ale Beer

The development of green and sustainable biotechnological approaches for preventing chill haze formation is currently under investigation. In this preliminary study, laccase and tannase (pure or combined) were applied as phenolic-degrading enzymes during two crucial brewing steps (i. post-mashing and ii. before the yeast inoculum). In post-mashing and irrespective of the dosage applied (100 μL/L or 1 mL/L), tannase-based treatment ensured the complete removal of haze active (HA) phenols, which was proved by the full prevention of chill haze (about 1 EBC vs. 22 EBC in the control sample). Before yeast inoculum for the alcoholic fermentation, the removal of haze active phenols and the prevention of chill haze were both tannase-dosage-dependent (15 and 2 EBC for the lowest and the highest dosages, respectively) although they failed to completely break down the HA phenols. This biotechnological approach did not significantly affect the chromatic properties of treated beer.

Postprandial Glycemic and Insulinemic Response by a Brewer’s Spent Grain Extract-Based Food Supplement in Subjects with Slightly Impaired Glucose Tolerance: A Monocentric, Randomized, Cross-Over, Double-Blind, Placebo-Controlled Clinical Trial

Dietary fiber exerts beneficial effects on human health reducing the risk factors of metabolic related diseases such as hyperglycemia, insulin resistance, and hypercholesterolemia. The aim of this study is to demonstrate the efficacy of a food supplement based on brewer’s spent grain (BSG) extract in the reduction of postprandial glycemia and insulinemia in normoglycemic subjects. BSG was chemically characterized, revealing the presence of resistant starch (14.64 g/100 g), arabinoxylans (7.50 g/100 g), β-glucans (1.92 g/100 g) and other soluble fibers (6.43 g/100 g), and bioaccessible ferulic acid (91.3 mg/100 g). For the clinical study, 40 normoglycemic subjects were randomized into two groups, 1 and 2 (n = 20), for a cross-over clinical design and received either BSG extract-based food supplement or placebo. Postprandial blood glucose values were significantly lower than corresponding values in the placebo group after 90 and 120 min, while at the baseline and in the first 60 min, the two glycemic curves overlapped substantially. This improved clinical outcome was corroborated by significant reductions in postprandial insulinemia. None of the subjects reported adverse effects. This study showed that the tested BSG extract-based food supplement improves glucose metabolism and insulinemic response in normoglycemic subjects with at most a mild insulin resistance.

Performance of Thermoplastic Extrusion, Germination, Fermentation, and Hydrolysis Techniques on Phenolic Compounds in Cereals and Pseudocereals

Bioactive compounds, such as phenolic compounds, are phytochemicals found in significant amounts in cereals and pseudocereals and are usually evaluated by spectrophotometric (UV-VIS), HPLC, and LC-MS techniques. However, their bioavailability in grains is quite limited. This restriction on bioavailability and bioaccessibility occurs because they are in conjugated polymeric forms. Additionally, they can be linked through chemical esterification and etherification to macro components. Techniques such as thermoplastic extrusion, germination, fermentation, and hydrolysis have been widely studied to release phenolic compounds in favor of their bioavailability and bioaccessibility, minimizing the loss of these thermosensitive components during processing. The increased availability of phenolic compounds increases the antioxidant capacity and favor their documented health promoting.

Yeast Strains and Wort Color as Factors Affecting Effects of the Ethanol Fermentation Process

Dark malts used in the production of brewing wort affect the ethanol fermentation process, the phenolic content, antioxidant capacity and the physiology of yeast cells. An innovative element of this research is the combination of investigating the effect of beer wort color modulated by the use of dark specialty malts on the course and effects of fermentation and the characteristics of post-fermentation yeast biomass of brewer’s strains with different characteristics. Dark and pale beer were obtained. The beers had different ethanol contents (4.51–5.79% v/v), resulting from real (62.29–80.36%) and apparent (75.37–98.26%) attenuation levels. Metabolic and morphological differences were demonstrated in the brewer’s yeast strains used. S. cerevisiae var. diastaticus was distinguished by its ability to ferment dextrin, resulting in the highest ethanol content in beers. The total phenolic content in beer depends on the color of the wort and the yeast strain used (244.48–547.56 mg of gallic acid/L). Dark beers show higher ferric ion reduction ability (FRAP) and antioxidant capacity (ABTS^•+) than pale beers fermented with the same yeast strains. Through biomass analysis, differences in yeast cell physiology depending on yeast strain and beer wort color were also revealed.