Water-in-oil emulsions enriched with alpha-linolenic acid in diacylglycerol form: Stability, formation mechanism and in vitro digestion analysis

Microemulsions based on Acer truncatum seed oil and its fatty acids: fabrication, rheological property, and stability

AIMS

To construct the microemulsion delivery system (ME) loading ATSO and NA and study their physicochemical characteristics to enhance their stability and water solubility.

METHODS

By plotting ternary phase diagrams, the composition and proportions of the MEs were determined. The physicochemical characteristics and stability of MEs were evaluated by mean diameter, polydispersity index (PDI), pH, electrical conductivity, transmission electron microscopy (TEM), rheological behaviour measurement, and phase inversion temperature (PIT).

RESULTS

The MEs was composed with EL-40 as a surfactant and specifically with the addition of ethanol as a cosurfactant in NA-loaded ME. The mean diameters of ATSO-loaded ME and NA-loaded ME were 39.65 ± 0.24 nm and 32.90 ± 2.65 nm, and PDI were 0.49 ± 0.01 and 0.28 ± 0.14, respectively. The TEM confirmed the spherical and smooth morphology of MEs. The rheological results indicated that MEs are dilatant fluids with the advantages of low viscosity, high fluidity, and tolerance to temperature fluctuations. The mean diameter and PDI of MEs showed no significant change after storage at 25 °C for 28 days and centrifugation.

CONCLUSION

The prepared microemulsions could expand the application prospects of ATSO and NA products in cosmetics, medicine, foods and other fields.

Dual functionality of diacylglycerols in water-in-oil emulsion gel systems

Distearin (DS) can be used as an emulsifier, due to its surface activity derived from the amphiphilic nature of the molecule, moreover, it can also crystallize and form a 3D crystal network that can induce oil gelation. The current research aimed to examine the ability to combine both emulsifying and oil gelation properties to structure and stabilize water-in-oil emulsion gel system. Different water contents and DS concentrations produce emulsion gels with different textural attributes while incorporating up to 30% of water in a 15% wt. DS-based oleogel resulted in stable white gels. Microscopy imaging confirmed the formation of a water-in-oleogel type emulsion gel characterized by DS crystallization in the continuous phase and at the interface through Pickering mechanism. A positive relation was observed between the G' and hardness values and water content, suggesting gel strengthening resulted from interactions between the DS crystals at the interface and the continuous phase, as suggested by the active filler theory. Thermal analysis revealed two broad melting events at the temperature range of 42.2-44.9 °C and 55.9-58.6 °C for emulsion gels with 10-30% water content, suggesting initial melting of β' polymorph and transition to β during melting, which was confirmed by XRD. The results showed that homogenization significantly improved the oil retention of the gels due to increased crystal surface area, while water addition slightly reduced it. Compared with traditional emulsions or oleogels, this water-in-oil gel system demonstrated prolonged stability and enhanced mechanical properties due to the dual functionality of DS at the water/oil interface and bulk.

Diacylglycerol emulsion with different droplet size improves the gelation properties of Nemipterus virgatus myofibrillar protein

Effects of diacylglycerol (DAG) emulsions with different particle sizes on gel properties, microstructures and chemical forces of myofibrillar protein (MP) gels were investigated. DAG emulsions addition significantly improved the whiteness of MP gels. With the decrease of emulsion droplet size, G', G" and immovable water content of MP gels gradually increased, and cooking loss decreased, in which, emulsion prepared under 200 W reduced the cooking loss to the minimum value of 2.57 %. Furthermore, the gel strength and texture properties of MP gels were enhanced as the decreasing emulsion droplet size, and significant improvement (P < 0.05) appeared in gel strength and hardness when ultrasonic power reached 200 W, and then texture indexes tended to be stable as power continued to increase. Reducing the emulsion particle size facilitated the uniform distribution of DAG in the gel network and enhanced the chemical forces of composite gel, forming the more compact network structure.

Evaluation of the Emulsifying Property and Oxidative Stability of Myofibrillar Protein-Diacylglycerol Emulsions Containing Catechin Subjected to Different pH Values

Myofibrillar protein-diacylglycerol emulsions containing catechin (MP-DAG-C) possess outstanding emulsifying property and oxidative stability. However, the effect of pH on MP-DAG-C emulsions should be revealed to provide possibilities for their application in practical meat products. Therefore, MP-DAG-C emulsions at different pH values were used in this study, in which lard, unpurified glycerolytic lard (UGL), and purified glycerolytic lard (PGL) were used as the oil phases. The results indicated that the emulsifying property of the UGL- and PGL-based emulsions increased compared to those of the lard-based emulsions (p < 0.05). The emulsifying activity and stability indices, absolute value of ζ-potential, and rheological characteristics increased with the increase in pH values (p < 0.05), with the droplets were smallest and distributed most uniformly at a pH of 6.5 compared to the other acidic environment (p < 0.05). The thiobarbituric acid substance and carbonyl content increased (p < 0.05), while the total sulfydryl content decreased (p < 0.05) during storage. However, there was no statistical difference between the oxidative stability of the MP-DAG-C emulsions with different pH values (p > 0.05). The results implied that the emulsifying property of MP-DAG-C emulsions increased with an increase in pH values. The oxidative stability of the MP-DAG-C emulsions at high pH values was improved by catechin.

Exploring Diacylglycerol Oil-Based Oleogels as Effective Stabilizers in Peanut Butter: Performance, Structural Insights, and Sensory Evaluation

In the pursuit of reducing oil separation in peanut butter, oleogels synthesized from diacylglycerol (DAG)-rich peanut oils, using glycerol monostearate (GMS) as the gelator, were examined as alternative stabilizers. In comparison to triacylglycerol (TAG)-rich peanut oils, the DAG oil-based oleogels exhibited better oil-binding capacities across increasing GMS concentrations. Intriguingly, thermal and rheological assessments pointed to a weaker network structure in DAG oil oleogels, as evidenced by their lower crystallization temperatures and reduced viscoelastic parameters (G' and G''). Insight from infrared spectroscopy revealed that this could stem from heightened intermolecular hydrogen bonding between the DAG oil and the gelator. When applied to peanut butter, DAG oil oleogels demonstrated efficacy in minimizing oil separation. Extended storage trials affirmed the long-term stability of peanut butter formulations incorporating these oleogels. Furthermore, sensory evaluations by panelists underscored favorable impressions, suggesting potential consumer acceptance. Overall, this study illuminates the promising role of DAG oleogels as effective, alternative stabilizers in peanut butter formulations.

Physicochemical properties and feasibility of coconut oil-based diacylglycerol as an alternative fat for healthy non-dairy creamer

Non-dairy creamers have been widely used for coffee whitening and texture improvement. To avoid the intake of trans fatty acids from partially hydrogenated oil, coconut oil-based diacylglycerol (CO-DAG) was applied in non-dairy creamer as core material. In this study, effects of DAG content (30, 50, 70, 90%) on the characteristics of CO-DAG were evaluated, including rheological and thermodynamic properties. The CO-DAG with a content of 50% exhibited a wide plastic range and contained mixture of β and β' polymorphic forms. Using CO-DAG (50%) as core material, the physicochemical properties of non-dairy creamer were characterized and compared with commercial products. The results indicated that CO-DAG-based non-dairy creamers showed similar encapsulation efficiency (92.74%) and thermal stability to commercial products. Furthermore, CO-DAG-based non-dairy creamer showed higher whiteness index (54.20) than commercial non-dairy creamers (50.22) when applied to black coffee. Overall, it is anticipated that CO-DAG-based non-dairy creamers have great potentials in coffee whitening.

Exploring the fates and molecular changes of different diacylglycerol-rich lipids during in vitro digestion

This study aimed to support the pursuit of healthy oils and investigate the relationships between lipid compositions and digestion fates of diacylglycerol (DAG)-rich lipids using an in vitro digestion model. Soybean-, olive-, rapeseed-, camellia-, and linseed-based DAG-rich lipids (termed SD, OD, RD, CD, and LD, respectively) were selected. These lipids exhibited identical lipolysis degrees (92.20-94.36 %) and digestion rates (0.0403-0.0466 s^-1). The lipid structure (DAG or triacylglycerol) was a more important factor affecting the lipolysis degree than other indices (glycerolipid composition and fatty acid composition). For RD, CD and LD with similar fatty acid compositions, the same fatty acid had different release levels, probably due to their different glycerolipid compositions (causing different distributions of the fatty acid in UU-DAG, USa-DAG and SaSa-DAG; U: unsaturated fatty acids, Sa: saturated fatty acids). This study provides insights into the digestion behaviors of different DAG-rich lipids and supports their food or pharmaceutical applications.

Influence of Proteins on Bioaccessibility of α-Tocopherol Encapsulation within High Diacylglycerol-Based Emulsions

α-Tocopherol has been widely used in medicine, cosmetics, and food industry as a nutritional supplement and antioxidant. However, α-tocopherol showed low bioaccessibility, and there is a widespread α-tocopherol deficiency in society today. The preparation of oil-in-water emulsions with high safety and low-calorie property is necessary. The aim of this research was to investigate the effects of different protein emulsifiers (whey protein isolate (WPI), soy protein isolate (SPI), and sodium casein (SC)) on the properties of emulsions delivery system, and diacylglycerol (DAG) was picked as a low-accumulated lipid. The interfacial changes, microstructural alterations, and possible interactions of the protein-stabilized DAG emulsions were investigated during the in vitro digestion. The results show that different proteins affect the degree of digestibility and α-tocopherol bioaccessibility of the emulsions. Both WPI- and SPI-coated emulsions showed good digestibility and α-tocopherol bioaccessibility (77.64 ± 2.93%). This might be due to the strong hydrolysis resistance of WPI (β-lactoglobulin) and the good emulsification ability of SPI. The SC-coated emulsion showed the lowest digestibility and α-tocopherol bioaccessibility, this might be due to the emulsification property of hydrolysis products of SC and the potential interaction with calcium ions. This study provides new possibilities for the application of DAG emulsions in delivery systems.

A lipid toolbox of sugar alcohol fatty acid monoesters for single-component lipid nanoparticles with temperature-controlled release

This study aimed to prepare single-component LNPs with sugar alcohol fatty acid monoesters for temperature-controlled release. In total, 20 kinds of lipids with a series of sugar alcohol head groups (ethylene glycol, glycerol, erythritol, xylitol and sorbitol) and fatty acyl tails (12:0, 14:0, 16:0 and 18:0) were synthesised via lipase-catalysed esterification. Their physicochemical properties and upper/lower critical solution temperature (LCST/USCT) were analysed. Two groups of mixed lipids, 78 % ethylene glycol lauric acid monoester + 22 % sorbitol stearic acid monoester (LNP-1) and 90 % ethylene glycol lauric acid monoester + 10 % xylitol myristic acid monoester (LNP-2), had LCST/USCT of approximately 37 °C, which formed empty LNPs using the emulsification-diffusion method. These two mixed lipids were prepared for LNPs loaded with curcumin, showing high encapsulation (>90 %), mean particle sizes of approximately 250 nm and low polydispersity index (≤0.2). These lipids have the potential for tailor-made LNPs achieving thermo-responsivity in delivering bioactive agents and drugs.

Carboxymethyl chitosan coated alpha-linolenic acid nanoliposomes: Preparation, stability and release in vitro and in vivo

Nanoliposome encapsulation combined with carboxymethyl chitosan (CMCS) surface decoration was employed to improve physicochemical stability and oral bioavailability of alpha-linolenic acid (ALA). Different nanoliposome systems including ALA-loaded nanoliposomes (ALA-NLs) and CMCS-coated ALA-NLs (CMCS-ALA-NLs) were characterized through dynamic light scattering, transmission electron microscope, Fourier transform infrared spectroscopy and differential scanning calorimetry. The results showed that CMCS-ALA-NLs had good encapsulation efficiency of 79% and layer formation with nanosized spherical carrier. The physicochemical stability of CMCS-ALA-NLs was better than that of ALA-NLs. CMCS-ALA-NLs were able to regulate the release of ALA in a simulated gastrointestinal environment. In vivo testing found that ALA concentration of CMCS-ALA-NLs had an area under the curve of 1.32, which was 1.28 times higher than that of ALA-NLs and 2 times higher than that of ALA-emulsion. The absorption of ALA was improved by CMCS-ALA-NLs. It suggested that CMCS-coated nanoliposomes should be an available delivery strategy for transporting ALA.