Development of hemp seed oil nanoemulsions loaded with ascorbyl palmitate: Effect of operational parameters, emulsifiers, and wall materials

Lipid-based nanocarriers loaded with bioactive compounds in active food packaging: Fabrication, characterization, and applications

New trends in the food industry emphasize safer, more stable, eco-friendly, and value-added packaging solutions. Active packaging has emerged to release or absorb bioactive components, which are often sensitive to physical, chemical and/or enzymatic factors as well as being unstable. Lipid-based nanocarriers (nanoemulsions, nanoliposomes, solid lipid nanoparticles and nanostructured lipid carriers) have demonstrated their industrial potential and efficiency in the uptake, protection, bioavailability and controlled/targeted release of a wide variety of water-soluble, fat-soluble or amphiphilic bioactive substances. Additionally, their reduced size and consequently, high surface-to-volume ratio, give them unique physicochemical attributes, novel characteristics in the final product and biocompatibility as well as adhesion strength with the food packaging, without altering the sensory attributes of the food. Despite these benefits, challenges related to stability, regulatory concerns, and large-scale production must be addressed. This review examines the fabrication, characterization, and application of lipid-based nanocarriers in active food packaging, emphasizing their benefits, challenges, and future potential while further exploring their successful integration into the food packaging industry.

Hemp seed oil-based emulsion gels stabilized by soybean protein isolate, inulin, and glyceryl monostearate: Phase inversion and baking application

This study delved into the potential of hemp seed oil (HSO)-based emulsion gels stabilized by soybean isolate protein (SPI) using high-speed dispersion method as innovative butter substitutes in the bakery industry, offering a dual benefit of health and functionality. In order to better mimic the properties of butter, the storage stability and plasticity of the emulsion gel were increased by successive attempts to add inulin to the SPI solution and glycerol monostearate (GMS) to the hemp seed oil as structuring agents. There was phase inversion as GMS added, 2 % GMS addition caused phase inverted from O/W to semibicontinuous, and W/O appeared when GMS increased to 4 % or more. This was because that GMS crystals could bind neighboring droplets, reduced the spatial resistance provided by the SPI, collapsed the original oil-in-water structure. This novel emulsion was integrated as a novel fat replacer in cakes, and 25 % replacement cakes was regarded as optimal substitution of commercial butter through texture profile analysis and sensory assessment. This research advances the potential use of HSO emulsion gels as substitutes for fats in baking applications.

Effect of ultrasonication on extraction yield, and the rheological and physicochemical characteristics of Mucuna sloanei gum

Mucuna sloanei flour is widely used as a thickening agent in Southern Nigerian cuisine, contributing to its texture and nutritional value. Additionally, it is gaining attention in pharmaceuticals for its health benefits, biodegradability, biocompatibility, and role in pharmaceutical formulation and controlled-release systems. However, there is a notable gap in the understanding of Mucuna gum extraction and its characterisation. This study investigated ultrasound-assisted extraction to improve gum extraction yield, as well as the physicochemical and rheological properties of M. sloanei gums. The ultrasound process improved extraction yields to 45.81 % and 47.09 % at 30 % and 60 % amplitudes, respectively, compared to 41.5 % for unsonicated extraction, reflecting enhancements of approximately 10.2 % and 13.3 % in yield while preserving or enhancing thermal properties. Thermal analysis indicated gelatinisation temperatures ranging from 92.12 to 103.40 °C, with no significant differences (p > 0.05) among gums. Thermogravimetric analysis revealed that extracted gums exhibited higher degradation onset temperatures than raw flour, indicating enhanced thermal stability which seems promising for industrial application. Furthermore, sonication reduced levels of D-xylose, d-fructose, L-(+)-arabinose, and sorbitol. Viscoelastic testing showed that the extracted gums had reduced shear-thinning behaviour and greater yield stress than the flour, suggesting their effectiveness as binders and viscosifiers. These findings underscore the potential of Mucuna sloanei gum as a commercially viable thickener in food formulations where flour is predominantly used and in the pharmaceutical industry as a natural binder, disintegrant, and controlled-release agent. The study also highlights the efficiency of ultrasound-assisted extraction as a scalable and sustainable method for gum extraction and modification.

The polysaccharide-based nanoemulsions: Preparation, mechanism, and application in food preservation-A review

The stability and bioavailability of antioxidant, antibacterial, and other bioactive substances could be improved through nanoemulsion systems, as a result, nanoemulsion technology has become popular in food preservation. Polysaccharides are green polymers, their renewability, richness, safety, and functionality determine broad application prospects. Polysaccharide-based nanoemulsion coatings with good waterproofness, and mechanical and biological properties are found to effectively prevent or delay water loss, respiration, gas exchange, and microbial corruption of fruits, vegetables, and meat products, and they will be an important innovative technology for sustainable development in the future. The structural and functional properties of polysaccharides that could stabilize nanoemulsions have been discussed, and the preparation methods, physicochemical properties, stability, and formation mechanism of nanoemulsions have been summarized in this review. In addition, the preparation methods of polysaccharide-based nanoemulsion coatings are summarized, the application and preservation mechanisms in fruits, vegetables, and meat products have been introduced, and future perspectives have been discussed. At present, the related researches mainly focus on the bactericidal activity and the sensory quality of food products, while the in-depth research is unclear, this review provides ideas for the subsequent research on polysaccharide-based nanoemulsions for food preservation.

Ascorbic acid and ascorbyl palmitate-loaded liposomes: Development, characterization, stability evaluation, in vitro security profile, antimicrobial and antioxidant activities

The objective of this work was to prepare and characterize liposomes containing co-encapsulated ascorbic acid (AA) and ascorbyl palmitate (AP), as well as to evaluate their stability, cytotoxicity, antioxidant, and antimicrobial activity. Through the pre-formulation studies, it was possible to improve the formulation, as leaving it more stable and with a greater antioxidant activity, resulting in a formulation designated LIP-AAP, with 161 nm vesicle size, 0.215 polydispersity index, -31.7 mV zeta potential, and pH of 3.34. Encapsulation efficiencies were 37% for AA and 79% for AP, and the content was 1 mg/mL for each compound. The optimized liposomes demonstrated stability under refrigeration for 60 days, significant antioxidant activity (31.4 μMol of TE/mL), and non-toxicity, but no antimicrobial effects against bacteria and fungi were observed. These findings confirm that the co-encapsulated liposomes are potent, stable antioxidants that maintain their physical and chemical properties under optimal storage conditions.

Enhancing cannabidiol bioaccessibility using ionic liquid as emulsifier to produce nanosystems: Characterization of structures, cytotoxicity assessment, and in vitro digestion

The emulsifying potential of a biocompatible ionic liquid (IL) to produce lipid-based nanosystems developed to enhance the bioaccessibility of cannabidiol (CBD) was investigated. The IL (cholinium oleate) was evaluated at concentrations of 1 % and 2 % to produce nanoemulsions (NE-IL) and nanostructured lipid carriers (NLC-IL) loaded with CBD. The IL concentration of 1 % demonstrated to be sufficient to produce both NE-IL and NLC-IL with excellent stability properties, entrapment efficiency superior to 99 %, and CBD retention rate of 100 % during the storage period evaluated (i.e. 28 days at 25 °C). The in vitro digestion evaluation demonstrated that the NLC-IL provided a higher stability to the CBD, while the NE-IL improved the CBD bioaccessibility, which was mainly related to the composition of the lipid matrices used to obtain each nanosystem. Finally, it was observed that the CBD cytotoxicity was reduced when the compound was entrapped into both nanosystems.

Development and characterization of nanostructured lipid carriers for cannabidiol delivery

This study evaluated the physicochemical characteristics of nanostructured lipid carriers (NLCs) as a potential vehicle for cannabidiol (CBD), a lipophilic molecule with great potential to promote health benefits. NLCs were produced using hemp seed oil and fully-hydrogenated soybean oil at different proportions. The emulsifiers evaluated were soybean lecithin (SL), Tween 80 (T80) and a mixture of SL:T80 (50:50). CBD was tested in the form of CBD-rich extract or isolate CBD, to verify if it affects the NLCs characteristics. Based on particle size and polydispersity, SL was considered the most suitable emulsifier to produce the NLCs. All lipid proportions evaluated had no remarkable effect on the physicochemical characteristics of NLCs, resulting in CBD-loaded NLCs with particle size below 250 nm, high CBD entrapment efficiency and CBD retention rate of 100% for 30 days, demonstrating that NLCs are a suitable vehicle for both CBD-rich extract or isolate CBD.

Improving the storage and oxidative stability of essential fatty acids by different encapsulation methods; a review

Linoleic acid and α-linolenic acid are the only essential fatty acids (EFAs) known to the human body. Other fatty acids (FAs) of the omega-6 and omega-3 families originate from linoleic acid and α-linolenic acid, respectively, by the biological processes of elongation and desaturation. In diets with low fish consumption or vegetarianism, these FAs play an exclusive role in providing two crucial FAs for maintaining our body's vital functions; docosahexaenoic acid and arachidonic acid. However, these polyunsaturated FAs are inherently sensitive to oxidation, thereby adversely affecting the storage stability of oils containing them. In this study, we reviewed encapsulation as one of the promising solutions to increase the stability of EFAs. Accordingly, five main encapsulation techniques could be classified: (i) spray drying, (ii) freeze drying, (iii) emulsification, (iv) liposomal entrapment, and (v) other methods, including electrospinning/spraying, complex coacervation, etc. Among these, spray drying was the frequently applied technique for encapsulation of EFAs, followed by freeze dryers. In addition, maltodextrin and gum Arabic were the main wall materials in carriers. Paying attention to industrial scalability and lower cost of the encapsulation process by the other methods are the important aspects that should be given more attention in the future.

Fabrication and Biological Activities of All-in-One Composite Nanoemulsion Based on Blumea balsamifera Oil-Tea Tree Oil

Nanoemulsion is a new multi-component drug delivery system; the selection of different oil phases can give it special physiological activity, and play the role of "medicine and pharmaceutical excipients all-in-one". In this paper, we used glycyrrhizic acid as the natural surfactant, and Blumea balsamifera oil (BB) and tea tree oil (TTO) as the mixed oil phase, to obtain a new green functional composite nanoemulsion. Using the average particle size and polydispersion index (PDI) as the evaluation criteria, the effects of the oil ratio, oil content, glycyrrhizic acid concentration, and ultrasonic time on the nanoemulsion were systematically investigated. The stability and physicochemical properties and biological activities of BB-TTO NEs prepared via the optimum formulation were characterized. The optimal prescription was BB: TTO = 1:1, 5% oil phase, 0.7% glycyrrhizic acid, and 5 min ultrasonication time. The mean particle size, PDI, and zeta potential were 160.01 nm, 0.125, and -50.94 mV, respectively. The nanoemulsion showed non-significant changes in stability after centrifugation, dilution, and 120 days storage. These nanoemulsions were found to exhibit potential antibacterial and anti-inflammatory activities. The minimal inhibitory concentration (MIC) of BB-TTO NEs against Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa is 2975 μg/mL, 2975 μg/mL, and 5950 μg/mL, respectively. A lower level of inflammatory cell infiltration and proportion of fibrosis were found in the synovial tissue of AIA rats treated with BB-TTO NEs. These findings demonstrate that the BB-TTO NEs produced in this study have significant potential for usage in antibacterial and anti-inflammatory areas.

Construction and formulation optimization of prothioconazole nanoemulsions for the control of Fusarium graminearum: Enhancing activity and reducing toxicity

In this study, the optimal emulsifier for prothioconazole nanoemulsions was initially screened based on appearance, microscopic observation, mean droplet size and polydispersity index (PDI). In addition, the BoxBehnken design method is adopted, and the optimal formula is screened with an emulsification time, emulsifier content, and solvent content as a single factor. On this basis, the nanoemulsion meets FAO standards for various indicators. The contact angle of droplets on wheat leaves was significantly reduced. This nanoemulsion also showed good inhibitory activity against Fusarium graminearum (EC₅₀ =1.94 mg L^-1), low acute toxicity to zebrafish (LC₅₀ =26.35 mg L^-1) and good biosafety to BEAS-2B cells. The nanoemulsion reduced the adverse effects of pesticide on wheat seed germination and growth. This study can help promote the design and manufacture of stable, efficient and safe agricultural nanoemulsions, and is expected to benefit the sustainable development of green plant protection.