Effect of ethanol, phytic acid and citric acid treatment on the physicochemical and heavy metal adsorption properties of corn starch

Comparative analysis of volatile compounds of an oyster enzymatic hydrolysate adsorbed by V-type starches based on electronic nose, GC-IMS, and GC-MS

Oyster enzymatic hydrolysates (OEHs) derived from marine sources possess intensely unpleasant flavors, which severely limit their acceptance by consumers. Herein, V-type starches (V6a/h, V7a/h and V8a/h) are utilized for the deodorization of the OEH. Changes of volatile compounds (VOCs) in the OEH between before and after deodorization are determined via the electronic nose (E-nose), gas chromatography-ion mobility spectrometry (GC-IMS), and gas chromatography-mass spectrometry (GC-MS). Results indicate that V-type starches, presenting varying cavity sizes, exhibit selective adsorption capabilities for the OEH VOCs. E-nose results suggest that V6a/h-, V7a/h-, and V8h-type starches selectively adsorb aromatic compounds, such as benzene, ammonia, and short-chain alkanes, whereas V8a-type starch prefers adsorbing organic sulfides, nitrogen oxides, and methyl compounds. GC-IMS and GC-MS results further reveal that V6a/h- and V7a/h-type starches exert selective adsorption effects on aldehydes and alcohols, respectively. Notably, GC-MS results show that V8a/h-type starches selectively adsorb amine compounds, while GC-IMS results show that V8a/h-type starches prefer aldehyde adsorption. This discrepancy is attributed to differences in the sensitivity of the two techniques in detecting VOCs. Moreover, 10 VOCs were identified in the OEH using GC-IMS and GC-MS. The contributions of 12 key off-odors to the OEH flavor decreased after deodorization. Accordingly, the utilization of novel and eco-friendly V-type starches to enhance the OEH flavor provides new perspectives for promoting the application of starch materials in deodorization techniques for aquatic products.

Recent Advances on Starch-Based Adsorbents for Heavy Metal and Emerging Pollutant Remediation

Starch is one of the most abundant polysaccharides in nature and has a high potential for application in several fields, including effluent treatment as an adsorbent. Starch has a unique structure, with zones of different crystallinity and a glycosidic structure containing hydroxyl groups. This configuration allows a wide range of interactions with pollutants of different degrees of hydrophilicity, which includes from hydrogen bonding to hydrophobic interactions. This review article aims to survey the use of starch in the synthesis of diverse adsorbents, in forms from nanoparticles to blends, and evaluates their performance in terms of amount of pollutant adsorbed and removal efficiency. A critical analysis of the materials developed, and the results obtained is also presented. Finally, the review provides an outlook on how this polysaccharide can be used more effectively and efficiently in remediation efforts in the near future.

Acylhydrazone-functionalized starch for efficient removal of hazardous dyes, heavy metal ion, and sulfides from wastewater: Adsorption behavior and mechanism analysis

Herein, a novel acylhydrazone biosorbent (GSL) with abundant three-dimensional porous structure was successfully prepared by using low-cost starch as raw material for water pollution remediation applications. Various analytical techniques were applied to characterize the morphological structure and chemical composition. Interestingly, the adsorption efficiency of the adsorbent towards Malachite green (MG), Safranin O (SO), Cu2+, and sulfide in the static adsorption experiment was extremely high due to presence of ample functional groups. Additionally, the adsorption isotherm and kinetic experiments revealed that the adsorption processes were based on monolayer chemisorption. The maximum sorption amounts were 2237.4961 mg/g for SO, 2101.6610 mg/g for MG, 410.7019 mg/g for Cu2+, and 483.0194 mg/g for sulfides at 298.15 k. The thermodynamic analysis also demonstrated that all adsorption processes were spontaneous heat processes. The adsorption mechanism was analyzed by FTIR, SEM-EDAX and XPS. The adsorption of SO onto GSL reached 1025.8617 mg/g in continuous adsorption experiments, and the experimental data were fitted through the Thomas model and Yoon-Nelson model. Furthermore, the GSL showed good reusability and salt resistance. Importantly, starch-based acylhydrazone as the adsorbent for the simultaneous removal of hazardous dyes, heavy metal ions and sulfhides has not yet been seen reported.

Ultrasound and enzyme treatments on morphology, structures, and adsorption properties of cassava starch

Porous starch materials are environmentally friendly and renewable and exhibit high adsorption performances. Ultrasound and compound enzyme (α-amylase and glucoamylase) treatments were applied to prepare modified cassava starch. The granules, crystal morphology, crystal structure, and molecular structure of starch were investigated. The hydrolysis degree, solubility, swelling, and adsorption properties of cassava starch were analyzed. After the cassava starch was modified by ultrasound and enzyme treatments, the granule size of the starch decreased, and the surfaces were eroded to form pits, grooves and cavity structure. The starch spherulites weakened or even disappeared. The functional groups of starch did not change significantly, but the degree of crystal order decreased. The double-helix structure was reduced, and the crystal structure was composed of A + V-type crystals, with a decrease in crystallinity. The gelatinization temperature and thermal degradation temperatures enhanced. The enzymatic hydrolysis degree and solubility of the modified cassava starch increased. The swelling degree decreased, and oil adsorption, water adsorption improved. MB adsorption behavior of modified cassava starch closely followed a pseudo-second-order kinetics model and the Langmuir isotherm equation. These findings could help to understand the relationship between the structure and properties of modified starch, and guide its application in the field of adsorption.

Effect of ethanol addition on the physicochemical, structural and in vitro digestive properties of Tartary buckwheat starch-quercetin/rutin complexes

The effects of ethanol on the physicochemical, structural and in vitro digestive properties of Tartary buckwheat starch-quercetin/rutin complexes (e-TBSQ and e-TBSR) were investigated. Ethanol restricted the gelatinization of Tartary buckwheat starch (TBS), which resulted an increase in ∆H, G' and G" as well as a decrease in apparent viscosity of e-TBSQ and e-TBSR. The particle size, scanning electron microscopy and X-ray diffraction results showed that ethanol influenced the morphological structure of TBS granules and the starch crystalline structure in e-TBSQ and e-TBSR changed from B-type to V-type when the ethanol concentration was 25%. Saturation transfer difference-nuclear magnetic resonance results revealed that ethanol weakened the binding ability of quercetin/rutin to TBS in e-TBSQ and e-TBSR, leading to a change in the binding site on the quercetin structural unit. The residual ungelatinized TBS granules in e-TBSQ and e-TBSR induced a high slowly digestible starch content, and thus displayed a "resistant-to-digestion".

Biopolymer‑carbonaceous composites, progress, and adsorptive mitigation of water pollutants

Chitin is the second most abundant natural biopolymer, which is composed of N-acetyl glucosamine units linked by β-(1 → 4) Chitosan is an N-deacetylated product of chitin. Properties of chitosan and chitin, such as biocompatibility, non-toxic nature, and biodegradability, make them successful alternatives for energy and environmental applications. However, their low mechanical properties, small surface area, reduced thermal properties, and greater pore volume restrict the potential for adsorption applications. Multiple investigations have demonstrated that these flaws can be prevented by fabricating chitosan and chitin with carbon-based composites. This review presents a comprehensive analysis of the fabrication of chitosan/chitin carbon-based materials. Furthermore, this review examines the prevalent technologies of functionalizing chitosan/chitin biopolymers and applications of chitin and chitosan as well as chitosan/chitin carbon-based composites, in various environmental fields (mitigating diverse water contaminants and developing biosensors). Also, the subsequent regeneration and reuse of adsorbents were also discussed. Finally, we summarize a concise overview of the difficulties and potential opportunities associated with the utilization of chitosan/chitin carbon-based composites as adsorbents to remove water contaminants.

Effects of mixed enzymolysis alone or combined with acetylation or carboxymethylation on the role of jujube kernel fibre as a biosorbent for wastewater treatment

Jujube kernel fibre (JKF) could serve as a renewable, abundant, low-cost, and environmentally friendly adsorbent for wastewater if its adsorption capacities are improved. However, data on the modification of JKF, especially on the combination of biological and chemical modifications, are scarce. Therefore, for the first time, we studied the effect of mixed enzymolysis alone or combined with acetylation or carboxymethylation on the structure and adsorption capacities of JKF. After these modifications, the microstructure of JKF became more porous, and its soluble fibre and extractable polyphenol contents, surface area and adsorption capacities for nitrite, copper, and lead ions were all significantly improved (P < 0.05). Meanwhile, mixed enzymatic hydrolysis and acetylation treated JKF showed the highest surface hydrophobicity (43.57) and oil-adsorption ability (4.47 g g-1), while mixed enzymatic hydrolysis and carboxymethylation treated JKF exhibited the highest water adsorption ability (10.66 g g-1), water expansion ability (8.50 mL g-1), and lead and copper ion chelating abilities. Additionally, mixed enzymatic hydrolyzed JKF had the highest nitrite-ion-adsorption ability (10.57 μmol g-1). It can be concluded that mixed enzymolysis combined with carboxymethylation is an optimal way to increase the hydration properties and heavy-metal-adsorption capacity of JKF, while mixed enzymolysis combined with acetylation is an effective approach to enhance the oil-adsorption capacity of JKF.

Preparation of 6-Amino-N-hydroxyhexanamide-Modified Porous Chelating Resin for Adsorption of Heavy Metal Ions

The pollution of water bodies by heavy metal ions has recently become a global concern. In this experiment, a novel chelating resin, D851-6-AHHA, was synthesized by grafting 6-amino-N-hydroxyhexanamide (6-AHHA) onto the (-CH2N-(CH2COOH)2) group of the D851 resin, which contained a hydroxamic acid group, amide group, and some carboxyl groups. This resin was developed for the purpose of removing heavy metal ions, such as Cr(III) and Pb(II), from water. The findings from static adsorption experiments demonstrated the remarkable adsorption effectiveness of D851-6-AHHA resin towards Cr(III) and Pb(II). Specifically, the maximum adsorption capacities for Cr(III) and Pb(II) were determined to be 91.50 mg/g and 611.92 mg/g, respectively. Furthermore, the adsorption kinetics of heavy metal ions by D851-6-AHHA resin followed the quasi-second-order kinetic model, while the adsorption isotherms followed the Langmuir model. These findings suggest that the adsorption process was characterized by monolayer chemisorption. The adsorption mechanism of D851-6-AHHA resin was comprehensively investigated through SEM, XRD, FT-IR, and XPS analyses, revealing a high efficiency of D851-6-AHHA resin in adsorbing Cr(III) and Pb(II). Specifically, the (-C(=O)NHOH) group exhibited a notable affinity for Cr(III) and Pb(II), forming stable multi-elemental ring structures with them. Additionally, dynamic adsorption experiments conducted using fixed-bed setups further validated the effectiveness of D851-6-AHHA resin in removing heavy metal ions from aqueous solutions. In conclusion, the experimental findings underscored the efficacy of D851-6-AHHA resin as a highly efficient adsorbent for remediating water bodies contaminated by heavy metal ions.

Physicochemical and digestive properties of corn starch nanoparticles incorporated different polyphenols

The corn starch nanoparticles were prepared by incorporating three kinds of polyphenols, including quercetin, proanthocyanidins and tannin acid. The physicochemical and digestive properties of corn starch nanoparticles were researched. The quercetin showed a higher complexation index than proanthocyanidins and tannin acid when they complexed with corn starch. The mean size of corn starch quercetin, proanthocyanidins and tannin acid were 168.5 nm, 179.1 nm and 188.6 nm, respectively. XRD results indicated that all the corn starch-polyphenols complex showed V-type crystalline structure, the crystallinity of corn starch-quercetin complex was 19.31 %, which showed more formation of amylose-quercetin single helical formed than the other two starch-polyphenol complexes. In vitro digestion revealed that polyphenols could resist digestion and quercetin increased the content of resistant starch from 23.32 % to 35.24 % and polyphenols can form complexes with starch through hydrophobic interactions or hydrogen bonding. This study indicated the hydrophobic polyphenols had a more significant effect on the digestibility of corn starch. And the cell toxicity assessments demonstrated that all nanoparticles were nontoxic and biocompatible.

Dual Enzymolysis Assisted by Acrylate or Phosphate Grafting: Influences on the Structural and Functional Properties of Jujube Residue Dietary Fiber

Jujube residue is an abundant and low-cost dietary fiber resource, but its relatively lower hydration and functional properties limit its utilization as an ingredient of functional food. Thus, cellulase and hemicellulase hydrolysis, enzymatic hydrolysis assisted by phosphate grafting (EPG), and enzymatic hydrolysis assisted by acrylate grafting (EAG) were used to improve the functional properties of jujube residue dietary fiber (JRDF) in this study. The results evidenced that these modifications all increased the porosity of the microstructure of JRDF and increased the soluble fiber content, surface area, and hydration properties, but reduced its brightness (p < 0.05). Moreover, JRDF modified by enzymolysis combined with acrylate grafting offered the highest extractable polyphenol content, oil, sodium cholate, and nitrite ion sorption abilities. Meanwhile, JRDF modified via enzymolysis assisted by phosphate grafting showed the highest soluble fiber content (23.53 g∙100 g-1), water-retention ability (12.84 g∙g-1), viscosity (9.37 cP), water-swelling volume (10.80 mL∙g-1), and sorption ability of copper (II) and lead (II) ions. Alternatively, JRDF modified with cellulase hydrolysis alone exhibited the highest glucose adsorption capacity (21.9 g∙100 g-1) at pH 7.0. These results indicate that EPG is an effective way to improve the hypolipidemic effects of JRDF, while EAG is a good choice to enhance its hydration and hypoglycemic properties.