Development of an oligosorbent for detection of ochratoxin A

Recent progress in determination of ochratoxin a in foods by chromatographic and mass spectrometry methods

Ochratoxin A is a highly toxic mycotoxin and has posed great threat to human health. Due to its serious toxicity and wide contamination, great efforts have been made to develop reliable determination methods. In this review, analytical methods are comprehensively summarized in terms of sample preparation strategy and instrumental analysis. Detailed method is described according to the food commodities in the order of cereal, wine, coffee, beer, cocoa, dried fruit and spice. This review mainly focuses on the recent advances, especially reported in the last decade. At last, challenges and perspectives are also discussed to achieve better advancement and promote practical application in this field.

An aptamer affinity column for purification and enrichment of aflatoxin B1 and aflatoxin B2 in agro-products

We have developed an aptamer affinity column (AAC) for the purification and enrichment of trace aflatoxin B₁ (AFB₁) and aflatoxin B₂ (AFB₂) in genuine agro-products through the covalent conjugation of amino modified aptamer and NHS-activated Sepharose. The coupling and working conditions found to be suitable for this AFB-AAC were examined in regard to coupling time (2 min), loading volume (30 mL), and the methanol concentration (< 10%) used in the loading step. The performance of AFB-AAC was then further evaluated in terms of capacity (329.1 ± 13.7 ng for AFB₁ and 162.5 ± 8.9 ng for AFB₂), selectivity (excellent), reusability (twenty-three times for AFB₁ and twelve times for AFB₂), and repeatability (92.7% ± 2.9% for AFB₁ and 71.5% ± 3.4% for AFB₂). Furthermore, the AAC clean-up combined with HPLC-FLD demonstrated excellent linearity over a wide range, good sensitivity with an LOD of 50 pg mL^-1 for AFB₁ and 15 pg mL^-1 for AFB₂, and acceptable recovery with different spiking levels in different matrices. Finally, the AAC was successfully applied to analyte AFB₁ and AFB₂ in four types of agro-products as well as a maize flour reference material, and the results were found to be in accordance with those of commercial IACs. This study provides a reference for the analysis of other trace analytes by merely changing the corresponding aptamer and represents a strong contender for immune affinity columns. Graphical abstract An aptamer affinity column for purification and enrichment of aflatoxin B₁ and aflatoxin B₂ in agro-products with the aid of HPLC-FLD and a post-column photochemical derivatization reactor.

BSA-based sample clean-up columns for ochratoxin A determination in wine: Method development and validation

Analytical chromatographic techniques for mycotoxins control are well established, but they often depend on costly immunoaffinity sample clean-up. Serum albumins, particularly that from bovine origin (BSA), have stable binding affinity towards some mycotoxins, and can be cheaper alternative receptors for sample clean-up due to their wide availability. Thus, this work used BSA immobilized in agarose beads as a novel solid-phase extraction method for quantification of ochratoxin A (OTA) in wine. Constructed BSA-agarose columns could extract OTA efficiently from red wine after its dilution (4-fold) in 0.1 M Tris pH 8.0. The method was linear (R² = 0.9999) in the OTA concentration range studied (0.05 to 3.0 μg L^-1), with recovery rates above 98%. It also showed low detection (0.017 μg L^-1) and quantification (0.051 μg L^-1) limits. The efficacy of the BSA-based method was further validated by direct comparison with commercial immunoaffinity columns. Portuguese wines analyzed by both methods had agreeing results.

Solid phase extraction as sample treatment for the determination of Ochratoxin A in foods: A review

Ochratoxin A (OTA) is a mycotoxin produced by two main types of fungi, Aspergillus and Penicillium species. OTA is a natural contaminant found in a large number of different matrices and is considered as a possible carcinogen for humans. Hence, low maximum permitted levels in foods have been established by competent authorities around the world, making essential the use of very sensitive analytical methods for OTA detection. Sample treatment is a crucial step of analytical methodology to get clean and concentrated extracts, and therefore low limits of quantification. Solid phase extraction (SPE) is a useful technique for rapid and selective sample preparation. This sample treatment enables the concentration and purification of analytes from the sample solution or extract by sorption on a solid sorbent. This review is focused on sample treatment procedures based on SPE prior to the determination of OTA in food matrices, published from 2010.

Selection of DNA aptamers against penicillin G using Capture-SELEX for the development of an impedimetric sensor

This paper describes for the first time the selection of aptamers selective to penicillin. Aptamers were selected using a specific process called Capture-SELEX (Systematic Evolution of Ligands by Exponential Enrichment). This technique is based on the selection of DNA aptamers using penicillin G in solution while the ssDNA library is fixed on a support. One aptamer showing a good affinity to penicillin was finally selected and tested in electrochemical sensor configuration, using electrochemical impedance spectroscopy as detection technique. The developed aptasensor allowed the detection of penicillin in a wide concentration range, comprised between 0.4 and 1000µgL^-1 Such performance was compatible with milk analysis, as the maximum residue limit tolerated in this matrix is 4µgL^-1. The selectivity of the developed sensor was also studied, showing that the sensor was also able to bind other beta-lactam antibiotics, although with a weaker affinity. Finally the sensor was used for detection of penicillin G in milk. It was shown that a simple sample treatment with isopropanol followed by filtration was sufficient to eliminate matrix effects, allowing the determination of penicillin in milk at concentrations compatible with legislation requirements.

Recent Advances for the Detection of Ochratoxin A

Ochratoxin A (OTA) is one of the mycotoxins secreted by Aspersillus and Penicillium that can easily colonize various grains like coffee, peanut, rice, and maize. Since OTA is a chemically stable compound that can endure the physicochemical conditions of modern food processing, additional research efforts have been devoted to develop sensitive and cost-effective surveillance solutions. Although traditional chromatographic and immunoassays appear to be mature enough to attain sensitivity up to the regulation levels, alternative detection schemes are still being enthusiastically pursued in an attempt to meet the requirements of rapid and cost-effective detections. Herein, this review presents recent progresses in OTA detections with minimal instrumental usage, which have been facilitated by the development of OTA aptamers and by the innovations in functional nanomaterials. In addition to the introduction of aptamer-based OTA detection techniques, OTA-specific detection principles are also presented, which exclusively take advantage of the unique chemical structure and related physicochemical characteristics.

Man-Made Synthetic Receptors for Capture and Analysis of Ochratoxin A

Contemporary analytical methods have the sensitivity required for Ochratoxin A detection and quantification, but direct application of these methods on real samples can be rarely performed because of matrix complexity. Thus, efficient sample pre-treatment methods are needed. Recent years have seen the increasing use of artificial recognition systems as a viable alternative to natural receptors, because these materials seem to be particularly suitable for applications where selectivity for Ochratoxin A is essential. In this review, molecularly imprinted polymers, aptamers and tailor-made peptides for Ochratoxin A capture and analysis with particular attention to solid phase extraction applications will be discussed.

A review on immobilised aptamers for high throughput biomolecular detection and screening

The discovery of Systematic Evolution of Ligands by Exponential Enrichment (SELEX) assay has led to the generation of aptamers from libraries of nucleic acids. Concomitantly, aptamer-target recognition and its potential biomedical applications have become a major research endeavour. Aptamers possess unique properties that make them superior biological receptors to antibodies with a plethora of target molecules. Some specific areas of opportunities explored for aptamer-target interactions include biochemical analysis, cell signalling and targeting, biomolecular purification processes, pathogen detection and, clinical diagnosis and therapy. Most of these potential applications rely on the effective immobilisation of aptamers on support systems to probe target species. Hence, recent research focus is geared towards immobilising aptamers as oligosorbents for biodetection and bioscreening. This article seeks to review advances in immobilised aptameric binding with associated successful milestones and respective limitations. A proposal for high throughput bioscreening using continuous polymeric adsorbents is also presented.

Miniaturized DNA aptamer-based monolithic sorbent for selective extraction of a target analyte coupled on-line to nanoLC

A complete characterization of a novel target-specific DNA aptamer-based miniaturized solid phase extraction (SPE)-sorbent coupled on-line to nanoLC is presented. A miniaturized oligosorbent (mOS) was prepared via the in situ sol-gel synthesis of a hybrid organic-inorganic monolith in 100 μm i.d. capillary columns using tetraethoxysilane and 3-aminopropyltriethoxysilane as precursors, followed by covalent binding of a 5'-amino-modified DNA aptamer with a C12 spacer arm specific for a molecule of small molecular weight. Ochratoxin A (OTA), one of the most abundant naturally occurring mycotoxins, was chosen as model analyte to demonstrate the principle of such an approach. The mOS was coupled on-line to RP-nanoLC-LIF. Selective extraction of OTA on several mOSs was demonstrated with an average extraction recovery above 80 % when percolating spiked binding buffer and a low recovery on control monoliths grafted with a non-specific aptamer. Reproducibility of mOSs preparation was highlighted by comparing extraction yields. Otherwise, the mOSs demonstrated no cross-reactivity towards an OTA structural analogue, i.e., ochratoxin B. Due to the high specific surface area of the hybrid silica-based monolith, the coverage density of DNA aptamers covalently immobilized in the capillaries was very high and reached 6.27 nmol μL(-1), thus leading to a capacity above 5 ng of OTA. This miniaturized device was then applied to the selective extraction of OTA from beer samples. It revealed to be effective in isolating OTA from this complex matrix, thus improving the reliability of its analysis at the trace level.

Label-free photoelectrochemical immunosensor for sensitive detection of Ochratoxin A

A general label-free photoelectrochemical (PEC) platform was manufactured by assembly of CdSe nanoparticles (NPs) sensitized anatase TiO2-functionalized electrode via layer-by-layer (LBL) strategy. CdSe NPs were assembled on anatase TiO2-functionalized electrode through dentate binding of TiO2 NPs to -COOH groups. Ascorbic acid (AA) was used as an efficient electron donor for scavenging photogenerated holes under visible-light irradiation. The photocurrent response of the CdSe NPs modified electrode was significantly enhanced as a result of the band alignment of CdSe and TiO2 in electrolyte. Ochratoxin A (OTA), as model analyte, was employed to investigate the performance of the PEC platform. Antibodies of OTA were immobilized on CdSe sensitized electrode by using the classic 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride coupling reactions between -COOH groups on the surfaces of CdSe NPs and -NH2 groups of the antibody. Under the optimized conditions, the photocurrent was proportional to OTA concentration range from 10pg/mL to 50ng/mL with detection limit of 2.0pg/mL. The employed PEC platform established a simple, fast and inexpensive strategy for fabrication of label-free biosensor, which might be widely applied in bioanalysis and biosensing in the future.

"Signal off" aptasensor based on enzyme inhibition induced by conformational switch

A novel sensing strategy for electrochemical aptamer-based sensors is presented. Nucleic acid aptamers are considered alternatives to antibodies. However, some of their intrinsic properties, such as that they can undergo conformational changes during the binding of the target, can be used to design novel sensing strategies. Unlike other electrochemical "signal off" aptamer-based sensors, we report a strategy based on enzymatic inhibition. Our approach shows the feasibility to detect small molecules based on the aptamer conformational change induced by the target that leads to the inhibition of the enzyme used as a label. Additionally, we prove the ability to regenerate the function of the aptasensor by simply applying a short potential pulse. As a proof-of-concept, the widely used aptamer for ochratoxin A (OTA) has been selected as a model. After self-assembling short oligonucleotides onto a gold electrode, complementary to the 3' end of the aptamer, hybridization of the aptamer takes place. To investigate the mechanism induced by the OTA-binding, surface plasmon resonance assays were performed, which confirmed the conformational switch of the aptamer rather than the aptamer displacement by dehybridization from the DNA-modified sensor surface. The electrochemical sensor can successfully detect OTA in wine at the limits stipulated by the European Commission. Given its sensitivity, rapid and easy detection, and regeneration, it can be envisaged as screening tool for OTA detection. Moreover, this sensing strategy has the potential to be applied to other aptamer-based biochemical assays for the detection of small molecules in the fields of food safety, environmental monitoring, and medical diagnostics.

Aptamer-based analysis: a promising alternative for food safety control

Ensuring food safety is nowadays a top priority of authorities and professional players in the food supply chain. One of the key challenges to determine the safety of food and guarantee a high level of consumer protection is the availability of fast, sensitive and reliable analytical methods to identify specific hazards associated to food before they become a health problem. The limitations of existing methods have encouraged the development of new technologies, among them biosensors. Success in biosensor design depends largely on the development of novel receptors with enhanced affinity to the target, while being stable and economical. Aptamers fulfill these characteristics, and thus have surfaced as promising alternatives to natural receptors. This Review describes analytical strategies developed so far using aptamers for the control of pathogens, allergens, adulterants, toxins and other forbidden contaminants to ensure food safety. The main progresses to date are presented, highlighting potential prospects for the future.

Aptamers: a promosing tool for ochratoxin A detection in food analysis

The contamination of food and feed by mycotoxins has become an increasingly serious problem. Mycotoxins represent a major risk to human and animal health, as well as economics. Herein, we focus on Ochratoxin A (OTA), which is one of the most common mycotoxins contaminating feed and foodstuffs. OTA is a secondary metabolite produced by various Aspergillus and Penicillium strains. Upon ingestion, OTA has a number of acute and chronic toxic effects. It is nephrotoxic, teratogenic, immunosuppressive, and carcinogenic (group 2B). As a consequence, some regulatory limits have been introduced on the levels of OTA in several commodities. The toxic nature of OTA demands highly sensitive and selective monitoring techniques to protect human and animal health. As alternative to traditional analytical techniques, biochemical methods for OTA analysis have attained great interest in the last few decades. They are mainly based on the integration of antibodies or aptamers as biorecognition elements in sensing platforms. However, aptamers have gained more attention in affinity-based assays because of their high affinity, specificity, stability, and their easy chemical synthesis. In this brief review, we present an overview of aptamer-based assays and their applications in OTA purification and detection, appeared in the literature in the last five years.

Rapid high-throughput analysis of ochratoxin A by the self-assembly of DNAzyme-aptamer conjugates in wine

We report a new label-free colorimetric aptasensor based on DNAzyme-aptamer conjugate for rapid and high-throughput detection of Ochratoxin A (OTA, a possible human carcinogen, group 2B) in wine. Two oligonucleotides were designed for this detection. One is N1 for biorecognition, which includes two adjacent sequences: the OTA-specific aptamer sequence and the horseradish peroxidase (HRP)-mimicking DNAzyme sequence. The other is a blocking DNA (B2), which is partially complementary to a part of the OTA aptamer and partially complementary to a part of the DNAzyme. The existence of OTA reduces the hybridization between N1 and B2. Thus, the activity of the non-hybridized DNAzyme is linearly correlated with the concentration of OTA up to 30 nM with a limit of detection of 4 nM (3σ). Meanwhile, a double liquid-liquid extraction (LLE) method is accordingly developed to purify OTA from wine. Compared with the existing HPLC-FD or immunoassay methods, the proposed strategy presents the most appropriate balance between accuracy and facility, resulting in a considerable improvement of real-time quality control, and thereby, preventing chronic poisoning caused by OTA contained red wine.

Fluorescent sensing ochratoxin A with single fluorophore-labeled aptamer

We explored a fluorescent strategy for sensing ochratoxin A (OTA) by using a single fluorophore-labeled aptamer for detection of OTA. This method relied on the change of the fluorescence intensity of the labeled dye induced by the specific binding of the fluorescent aptamer to OTA. Different fluorescein labeling sites of aptamers were screened, including the internal thymine bases, 3'-end, and 5'-end of the aptamer, and the effect of the labeling on the aptamer affinity was investigated. Some fluorophore-labeled aptamers showed a signal-on or signal-off response. With the fluorescent aptamer switch, simple, rapid, and selective sensing of OTA at nanomolar concentrations was achieved. OTA spiked in diluted red wine could be detected, showing the feasibility of the fluorescent aptamer for a complex matrix. This method shows potential for designing aptamer sensors for other targets.

Microfluidic channel with embedded SERS 2D platform for the aptamer detection of ochratoxin A

A selective aptameric sequence is adsorbed on a two-dimensional nanostructured metallic platform optimized for surface-enhanced Raman spectroscopy (SERS) measurements. Using nanofabrication methods, a metallic nanostructure was prepared by electron-beam lithography onto a glass coverslip surface and embedded within a microfluidic channel made of polydimethylsiloxane, allowing one to monitor in situ SERS fingerprint spectra from the adsorbed molecules on the metallic nanostructures. The gold structure was designed so that its localized surface plasmon resonance matches the excitation wavelength used for the Raman measurement. This optofluidic device is then used to detect the presence of a toxin, namely ochratoxin-A (OTA), in a confined environment, using very small amounts of chemicals, and short data acquisition times, by taking advantage of the optical properties of a SERS platform to magnify the Raman signals of the aptameric monolayer system and avoiding chemical labeling of the aptamer or the OTA target.

Highly sensitive ochratoxin A impedimetric aptasensor based on the immobilization of azido-aptamer onto electrografted binary film via click chemistry

The aptamer immobilization onto organized mixed layers of diazonium salts via click chemistry was explored. The immobilized aptamer was employed in the fabrication of a highly sensitive and reusable electrochemical impedimetric aptasensor for the detection of ochratoxin A (OTA). The screen-printed carbon electrodes (SPCEs) were first modified by electrografting of a protected 4-((trimethylsilyl)ethynyl) benzene (TMSi-Eth-Ar) layer followed by a second one of p-nitrobenzene (p-NO(2)-Ar) by means of electrochemical reduction of their corresponding diazonium salts, (TMSi-Eth-Ar-N(2)(+)) and (p-NO(2)-ArN(2)(+)). After deprotection, a layer with active ethynyl groups was obtained. In the presence of copper (I) catalyst, the ethynyl groups reacted efficiently with aptamer bearing an azide function, thus forming a covalent 1,2,3-triazole linkage. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in the presence of ferri/ferrocyanide redox probe [Fe(CN)(6)](4-/3-) were used to characterize each step in the aptasensor development. The increase in electron-transfer resistance (R(et)) values due to the specific aptamer-OTA interaction was proportional to the concentration of OTA in a range between 1.25 ng/L and 500 ng/L, with a detection limit of 0.25 ng/L.

Signal amplified strategy based on target-induced strand release coupling cleavage of nicking endonuclease for the ultrasensitive detection of ochratoxin A

In this work, a new signal amplified strategy based on target-induced strand release coupling cleavage of nicking endonuclease for the ultrasensitive detection of ochratoxin A (OTA) is reported. OTA aptamer (DNA1) and OTA aptamer complementary (DNA2) were immobilized onto a magnetic bead (MB). In the presence of OTA, DNA2 was dissociated and released from the MB. The released DNA2 then hybridized with DNA3, which was linked at the 5' terminus of the amplification template and can extend along the template in the presence of Phi 29 DNA polymerase. The formed double-stranded DNA was cleaved by nicking endonuclease Nb.BbvCI and produced a short single-stranded DNA. The cleaved DNA strand generated a new site by Phi 29 DNA polymerase and the process of extension and cleavage was cyclical. Thus, a amount of the short single-stranded DNA were produced. Using DNA and ABEI labeled carboxylic silica nanoparticles chemiluminescence (CL) probe, the short single-stranded DNA could be sensitively detected. The CL intensity (ΔI) versus the concentration of OTA was linear in the range from 1.0×10(-12) to 5.0×10(-8)g mL(-1). The detection limit was 3.0×10(-13)g mL(-1), and the RSD was 3.4% at 1.0×10(-10)g mL(-1) (n=7). The developed method has been applied to detect OTA in naturally contaminated wheat samples. Due to its simplicity, sensitivity and no need of specific recognition of aptamer for cleavage, this CL bioassay offers a promising approach for the detection of OTA and other biomolecules.

Analytical performances of a DNA-ligand system using time-resolved fluorescence for the determination of ochratoxin A in wheat

The analytical performances of a novel DNA-ligand system using the time-resolved fluorescence (TRF) response of ochratoxin A (OTA)-terbium-DNA aptamer interaction were tested for the quantitative determination of OTA in wheat. Wheat was extracted with acetonitrile/water (60:40, v/v) followed by clean-up through affinity columns containing a DNA-aptamer-based oligosorbent. Then, OTA was detected by TRF spectroscopy after reaction with a terbium fluorescent solution containing the DNA-aptamer probe. The entire procedure was performed in less than 30 min, including sample preparation, and allowed analysis of several samples simultaneously with a 96-well microplate reader. The average recovery from samples spiked with 2.5-25 μg kg(-1) OTA was 77%, with a relative standard deviation lower than 6% and a quantification limit of 0.5 μg kg(-1). Comparative analyses of 29 naturally contaminated (up to 14 μg kg(-1)) wheat samples using the aptamer-affinity column/TRF method or the immunoaffinity column/high-performance liquid chromatography method showed good correlation (r = 0.985) in the range tested. The trueness of the aptamer-based method was additionally assessed by analysis of two quality control wheat materials for OTA. The DNA-ligand system is innovative, simple and rapid, and can be used to screen large quantities of samples for OTA contamination at levels below the EU regulatory limit with analytical performances satisfying EU criteria for method acceptability.

Developments in mycotoxin analysis: an update for 2010-2011

This review highlights developments in mycotoxin analysis and sampling over a period between mid-2010 and mid-2011. It covers the major mycotoxins: aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxin, patulin, trichothecenes, and zearalenone. Analytical methods for mycotoxins continue to be developed and published. Despite much interest in immunochemical methods and in the rapid development of LC-MS methodology, more conventional methods, sometimes linked to novel clean-up protocols, have also been the subject of research publications over the above period. Occurrence of mycotoxins falls outside the main focus of this review; however, where relevant to analytical method development, this has been mentioned.