Combined effects of malic acid dip and pulsed light treatments on the inactivation of Listeria innocua and Escherichia coli on fresh-cut produce

Combined treatment of pulsed light and nisin-organic acid based antimicrobial wash for inactivation of Escherichia coli O157:H7 in Romaine lettuce, reduction of microbial loads, and retention of quality

Microbial safety of fresh produce continues to be a major concern. Novel antimicrobial methods are needed to minimize the risk of contamination. This study investigated the antimicrobial efficacy of pulsed light (PL), a novel nisin-organic acid based antimicrobial wash (AW) and the synergy thereof in inactivating E. coli O157:H7 on Romaine lettuce. Treatment effects on background microbiota and produce quality during storage at 4 °C for 7 days was also investigated. A bacterial cocktail containing three outbreak strains of E. coli O157:H7 was used as inoculum. Lettuce leaves were spot inoculated on the surface before treating with PL (1-60 s), AW (2 min) or combinations of PL with AW. PL treatment for 10 s, equivalent to fluence dose of 10.5 J/cm2, was optimal and resulted in 2.3 log CFU/g reduction of E. coli O157:H7, while a 2 min AW treatment, provided a comparable pathogen reduction of 2.2 log CFU/g. Two possible treatment sequences of PL and AW combinations were investigated. For PL-AW combination, inoculated lettuce leaves were initially exposed to optimum PL dose followed by 2 min AW treatment, whereas for AW-PL combination, inoculated lettuce were subjected to 2 min AW treatment prior to 10 s PL treatment. Both combination treatments (PL-AW and AW-PL) resulted in synergistic inactivation as E. coli cells were not detectable after treatment, indicating >5 log pathogen reductions. Combination treatments significantly (P < 0.05) reduced spoilage microbial populations on Romaine lettuce and also hindered their growth in storage for 7 days. The firmness and visual quality appearance of lettuce were not significantly (P > 0.05) influenced due to combination treatments. Overall, the results reveal that PL and AW combination treatments can be implemented as a novel approach to enhance microbial safety, quality and shelf life of Romaine lettuce.

The Impact of a Pulsed Light Stream on the Quality and Durability of the Cold-Stored Longissimus Dorsal Muscle of Pigs

The purpose of this study was to investigate the effect of pulsed light application (exposure to a pulsed light beam (PL) of 400 Hz for a period of 60 s, with an energy dose of 600 mW and wavelengths of 660 and 405 nm) on the physicochemical, technological, and sensory properties, as well as the nutritional value and shelf life of cold-storage pig longissimus dorsi muscle. Each muscle was divided into six parts, three of which were control samples, and the rest were exposed to pulsed light. The detailed laboratory tests of the meat were conducted 1, 7, and 10 days after slaughter. The meat was cold stored at +3 °C ± 0.5 °C. The study showed that the application of pulsed light has a favorable effect on lowering the TBARS index, oxidation-reduction potential, and water activity values. In addition, the application of PL had no statistically significant effect on the variation in the perception of selected sensory characteristics of meat. Furthermore, PL processing, as a low-energy-intensive method that can be environmentally friendly and thus have a large potential for implementation, is an innovative way to extend the shelf life, especially of raw meat, without a negative impact on its quality. This is of particular importance for food security (especially in the quantitative and qualitative aspects of food, but also in terms of food safety).

Conventional and non-conventional disinfection methods to prevent microbial contamination in minimally processed fruits and vegetables

Pandemic COVID-19 warned the importance of preparing the immune system to prevent diseases. Therefore, consuming fresh fruits and vegetables is essential for a healthy and balanced diet due to their diverse compositions of vitamins, minerals, fiber, and bioactive compounds. However, these fresh products grew close to manure and irrigation water and are harvested with equipment or by hand, representing a high risk of microbial, physical, and chemical contamination. The handling of fruits and vegetables exposed them to various wet surfaces of equipment and utensils, an ideal environment for biofilm formation and a potential risk for microbial contamination and foodborne illnesses. In this sense, this review presents an overview of the main problems associated with microbial contamination and the several chemicals, physical, and biological disinfection methods concerning their ability to avoid food contamination. This work has discussed using chemical products such as chlorine compounds, peroxyacetic acid, and quaternary ammonium compounds. Moreover, newer techniques including ozone, electrolyzed water, ultraviolet light, ultrasound, high hydrostatic pressure, cold plasma technology, and microbial surfactants have also been illustrated here. Finally, future trends in disinfection with a sustainable approach such as combined methods were also described. Therefore, the fruit and vegetable industries can be informed about their main microbial risks to establish optimal and efficient procedures to ensure food safety.

Hurdle Effect of Hot Air Impingement Drying and Surfactant-Sanitizer Wash on Removal of Listeria innocua from Fresh Apples

ABSTRACT

This study investigated the decontamination efficacy of washing treatments for whole fresh apples by using washes containing surfactants, lauric arginate, sodium dodecyl sulfate, and Tween 20, combined with peracetic acid (PAA), followed by hot air impingement drying. Whole fresh apples of selected varieties (Gala and Granny Smith) were inoculated with Listeria innocua (7 log CFU/mL) by using a dipping method, and then dried and subjected to wash treatments with selected washing solutions (H2O, PAA, PAA-lauric arginate, PAA-sodium dodecyl sulfate, and PAA-Tween 20), followed by hot air impingement drying at two different temperature and time conditions, 93°C for 60 s or 121°C for 25 s. The H2O and PAA wash followed by hot air impingement drying led to a maximum 1.5-log reduction of L. innocua on the fruit surface. Adding surfactants increased the effectiveness of washing and drying treatments, resulting in an approximate 2.2-log reduction. Surfactants increased the spreadability and evaporation rate of the washing solutions. Posttreatment changes in apple firmness were assessed during a 21-day storage at 4 and 21°C. The hot air impingement drying had no adverse effect on the firmness of the apples and did not show any further reduction in L. innocua. Washing apples with solutions containing surfactants combined with PAA followed by hot air impingement drying helped to reduce the microbial loads to some extent and may help to reduce drying times significantly.

HIGHLIGHTS

Evaluation of a sanitizing washing step with different chemical disinfectants for the strawberry processing industry

Strawberries are often consumed fresh or only receive minimal processing, inducing a significant health risk to the consumer if contamination occurs anywhere from farm to fork. Outbreaks of foodborne illness associated with strawberries often involve a broad range of microbiological agents, from viruses (human norovirus) to bacteria (Salmonella spp. and Listeria monocytogenes). The addition of sanitizers to water washes is one of the most commonly studied strategies to remove or inactivate pathogens on berries as well as avoid cross contamination due to reuse of process wash water. The risk posed with the safety issues of by-products from chlorine disinfection in the fruit industry has led to a search for alternative sanitizers. We evaluated the applicability of different chemical sanitizers (peracetic acid (PA), hydrogen peroxide (H₂O₂), citric acid (CA), lactic acid (LA) and acetic acid (AA)) for the inactivation of S. enterica, L. monocytogenes and murine norovirus (MNV-1) on strawberries. A control treatment with chlorine (NaClO) (100 ppm) was included. For each sanitizer, different doses (40, 80 and 120 ppm for PA and 1, 2.5 and 5% for H₂O₂, LA, AA and CA) and time (2 and 5 min) were studied in order to optimize the decontamination washing step. The best concentrations were 80 ppm for PA, 5% for H₂O₂ and 2.5% for organic acids (LA, AA and CA) after 2 min treatment. Results indicate that the sanitizers selected may be a feasible alternative to chlorine (100 ppm) for removing selected pathogenic microorganisms (P > 0.05), with reductions about ≥2 log for bacterial strains and ≥ 1.7 log for MNV-1. As the washing water may also increase the microbial counts by cross-contamination, we observed that no pathogenic bacteria were found in wash water after 5% H₂O₂ and 80 ppm PA after 2 min treatment. On the other hand, we also reported reductions about total aerobic mesophyll (TAM) (0.0-1.4 log CFU/g) and molds and yeasts (M&Y) (0.3-1.8 log CFU/g) with all alternative sanitizers tested. Strawberries treated did not shown significant differences about physio-chemical parameters compared to the untreated samples (initial). For this study, the optimal sanitizer selected was PA, due to the low concentration and cost needed and its microbiocidal effect in wash water and fruit. Notwithstanding the results obtained, the effect of PA in combination with other non-thermal technologies such as water-assisted ultraviolet (UV-C) light should be studied in future research to improve the disinfection of strawberries.

Pulsed Light: Challenges of a Non-Thermal Sanitation Technology in the Winemaking Industry

Pulsed light is an emerging non-thermal technology viable for foodstuff sanitation. The sanitation is produced through the use of high energy pulses during ultra-short periods of time (ns to µs). The pulsed light induces irreversible damages at the DNA level with the formation of pyrimidine dimers, but also produces photo-thermal and photo-physical effects on the microbial membranes that lead to a reduction in the microbial populations. The reduction caused in the microbial populations can reach several fold, up to 4 log CFU/mL decrement. A slight increase of 3 to 4 °C in temperature is observed in treated food; nonetheless, this increase does not modify either the nutritional properties of the product or its sensory profile. The advantages of using pulsed light could be used to a greater extent in the winemaking industry. Experimental trials have shown a positive effect of reducing native yeast and bacteria in grapes to populations below 1–2 log CFU/mL. In this way, pulsed light, a non-thermal technology currently available for the sanitation of foodstuffs, is an alternative for the reduction in native microbiota and the later control of the fermentative process in winemaking. This certainly would allow the use of fermentation biotechnologies such as the use of non-Saccharomyces yeasts in mixed and sequential fermentations to preserve freshness in wines through the production of aroma volatile compounds and organic acids, and the production of wines with less utilization of SO2 in accordance with the consumers’ demand in the market.

Inactivation of foodborne pathogens by the synergistic combinations of food processing technologies and food-grade compounds

There is a need to develop food processing technologies with enhanced antimicrobial capacity against foodborne pathogens. While considering the challenges of adequate inactivation of pathogenic microorganisms in different food matrices, the emerging technologies are also expected to be sustainable and have a minimum impact on food quality and nutrients. Synergistic combinations of food processing technologies and food-grade compounds have a great potential to address these needs. During these combined treatments, food processes directly or indirectly interact with added chemicals, intensifying the overall antimicrobial effect. This review provides an overview of the combinations of different thermal or nonthermal processes with a variety of food-grade compounds that show synergistic antimicrobial effect against pathogenic microorganisms in foods and model systems. Further, we summarize the underlying mechanisms for representative combined treatments that are responsible for the enhanced microbial inactivation. Finally, regulatory issues and challenges for further development and technical transfer of these new approaches at the industrial level are also discussed.

Efficacy of Surfactant Combined with Peracetic Acid in Removing Listeria innocua from Fresh Apples

Large amounts of water used in the apple packing process, the presence of organic matter, and difficult-to-clean equipment are vectors for contaminating apples with foodborne pathogens, such as Listeria monocytogenes. There is a need to develop new cleaning methods for fresh apples and evaluate their antimicrobial efficacy. A series of surfactants of different chemical properties (cationic lauric arginate [LAE], anionic sodium dodecyl sulfate [SDS], and nonionic Tween 20 [T20]) alone and combined with peracetic acid (PAA) were evaluated for their efficiency in the removal of L. innocua, a surrogate of L. monocytogenes, from fresh apples. Whole fresh apples were inoculated with L. innocua (7 log CFU/mL) by a dipping method, dried, and subjected to wash treatments with selected cleaning solutions (water, PAA, PAA-LAE, PAA-SDS, and PAA-T20). The contact angle between the cleaning solutions and the surface of the apples was measured. The antimicrobial activity of the cleaning solutions and the efficacy of the cleaning treatment were evaluated by enumeration of L. innocua from treated apples and visualized by scanning electron microscopy. Stem bowl and calyx cavities of the apple harbored higher bacteria concentrations (∼4.82 log CFU per apple), compared with the equatorial section (∼2.66 log CFU per apple). Addition of 0.1% of selected surfactants led to a significant decrease in surface tension of cleaning solutions and allowed better spreading on the apple surface. Surfactants combined with PAA solution resulted in higher L. innocua reduction compared with PAA alone; however, their efficacy was limited. The most effective cleaning solution was PAA-T20, with reduction of approximately 2.2 log. Scanning electron microscopy imaging confirmed that most bacteria were harbored inside the surface irregularities. PAA alone and with surfactants caused damage and deformation of bacteria cells. Cleaning apples with PAA combined with surfactants may improve microbial safety in whole apples; however, the efficiency of the decontamination treatment can be reduced because of variations in apple morphology.

Emerging chemical and physical disinfection technologies of fruits and vegetables: a comprehensive review

With a growing demand for safe, nutritious, and fresh-like produce, a number of disinfection technologies have been developed. This review comprehensively examines the working principles and applications of several emerging disinfection technologies. The chemical treatments, including chlorine dioxide, ozone, electrolyzed water, essential oils, high-pressure carbon dioxide, and organic acids, have been improved as alternatives to traditional disinfection methods to meet current safety standards. Non-thermal physical treatments, such as UV-light, pulsed light, ionizing radiation, high hydrostatic pressure, cold plasma, and high-intensity ultrasound, have shown significant advantages in improving microbial safety and maintaining the desirable quality of produce. However, using these disinfection technologies alone may not meet the requirement of food safety and high product quality. Several hurdle technologies have been developed, which achieved synergistic effects to maximize lethality against microorganisms and minimize deterioration of produce quality. The review also identifies further research opportunities for the cost-effective commercialization of these technologies.

Disinfection of lettuce using organic acids: an ecological analysis using 16S rRNA sequencing

Comparing disinfection efficacies of same type sanitizer using a combined microbial reduction/16S rRNA analysis strategy.

Evaluation of Sanitizing Methods for Reducing Microbial Contamination on Fresh Strawberry, Cherry Tomato, and Red Bayberry

Strawberries, cherry tomatoes, and red bayberries, which are the most popular types of fresh produce in China, are vulnerable to microbial contamination. In this study, different sanitizing methods [treatment with 2% organic acids, 0.02% sodium hypochlorite (SH), 0.1% sodium chlorite (SC), and 0.1% acidified sodium chlorite (ASC)] were applied to fresh strawberry, cherry tomato, and red bayberry, and their abilities to reduce aerobic bacteria, Escherichia coli O157:H7, mold, yeast, and Salmonella Typhimurium were evaluated. The commercially used SH method reduced the background microbiota on strawberry, cherry tomato, and red bayberry by 0.20-2.07 log cfu/g. The ASC method reduced background microbiota (except for mold) on strawberry and cherry tomato by more than 3.0 log cfu/g. ASC was the only sanitizer that significantly reduced mold on red bayberry, and lactic acid was the only organic acid sanitizer that effectively reduced yeast on red bayberry. The ASC method had the best sterilizing effect on the three fresh fruits and also required the shortest sanitizing time and low chlorite content. The application of ASC method significantly reduced the microbiota on retail grocery samples, and the effect was similar to that achieved by sanitizing methods comparison.

Recent findings in pulsed light disinfection

Nonthermal disinfection technologies are gaining increasing interest in the field of minimally processed food in order to improve the microbial safety or to extend the shelf life. Especially fresh-cut produce or meat and fish products are vulnerable to microbial spoilage, but, due to their sensitivity, they require gentle preservation measures. The application of intense light pulses of a broad spectral range comprising ultraviolet, visible and near infrared irradiation is currently investigated as a potentially suitable technology to reduce microbial loads on different food surfaces or in beverages. Considerable research has been performed within the last two decades, in which the impact of various process parameters or microbial responses as well as the suitability of pulsed light (PL) for food applications has been examined. This review summarizes the outcome of the latest studies dealing with the treatment of various foods including the impact of PL on food properties as well as recent findings about the microbicidal action and relevant process parameters.

Effects of malic acid or/and grapefruit seed extract for the inactivation of common food pathogens on fresh-cut lettuce

This study investigated the antimicrobial activity of malic acid (MA), grapefruit seed extract (GSE), and combined (MA+GSE) treatment against Escherichia coli O157:H7, Salmonella Typhimurium, and Listeria monocytogenes on fresh-cut lettuce. The antimicrobial effects of 1% MA and 0.5% GSE alone and in combination (1% MA+0.5% GSE) were tested on artificially inoculated lettuce during storage at 5°C for 14 days. The maximum reductions of E. coli O157:H7, S. Typhimurium, and L. monocytogenes were 4.96, 4.80, and 3.95 log CFU/g observed with MA+GSE during storage for 14 days, respectively. MA+GSE showed the greatest reduction against in E. coli O157:H7 and L. monocytogenes. These results indicate that the combined treatment was more effective than MA and GSE alone treatment. Therefore, it suggests that MA + GSE could be used as an effective intervention method for improving microbiological safety of fresh-cut lettuce.