Assessment of Penicillium expansum and Escherichia coli transfer from poplar crates to apples

Using plasma-activated water for decontamination of Salmonella spp. on common building surfaces in poultry houses

Plasma-activated water (PAW) has been shown to have antimicrobial properties, making it a promising tool for surface decontamination. This study evaluated the ability of PAW generated from high voltage atmospheric cold plasma to remove Salmonella from common surfaces (stainless steel (SS), polyvinyl chloride (PVC), concrete, and wood) found in poultry houses. PAW was generated by exposing distilled water to atmospheric cold plasma in 80% humid air at 90 kV and 60 Hz for 30 min. The resulting PAW contained 1120 ppm of nitrate and 1370 ppm of hydrogen peroxide, with a pH of 1.83. PAW was then applied to coupons of SS, PVC, wood, and concrete surfaces inoculated with 7-8 log10 CFU of cocktail of Salmonella spp. (S. Typhimurium, S. Newport, S. Montevideo, and S. Enteritidis). PAW effectively reduced Salmonella levels on SS and PVC surfaces to below the detection limit within 30 s. On wood surfaces, a longer treatment time of 7.5 min was required to achieve a maximum reduction of 2.63 log10 CFU, likely due to the porosity of the wood limiting PAW contact with the bacteria. On concrete surfaces, the reduction in Salmonella levels was only 0.98 log10 CFU. This was likely due to the greater surface roughness and high alkalinity, which neutralized the PAW species.

Construction for Health; Reversing the Impacts

The health of humans and the planet are the most vital contemporary issues and essential components of the Sustainable Development Goals (SDGs). Scientists and professionals strive for integrated, evolving, healthy, and sustainable solutions encompassing biodiversity and industrial ecology, while offering viable economic attainments. The building industry, especially construction, is an extensive economic counterpart that largely influences health on various levels. On a practical scale, most direct or indirect impacts on health are related to conventional construction systems (CCSs), particularly their materialisations and implementation methods. Therefore, from a global perspective, emerging technologies or remodelled methods to accomplish sustainable use, reuse, and recycling, and improving the planet’s health to ensure the wellbeing of its inhabitants, are crucial. The current research is part of a broader study on “programmable construction systems” (PCSs), concentrating on “programmable construction materials” (PCMs) for health. Therefore, issues are reviewed, relevancies are addressed, and health-oriented concepts are discussed. Example concepts of formulation and the simplified toolkit creations follow the problems’ sources in a case study, providing insight into the resulting multiscale impacts on real-life practices. The results prove the method’s potential and validate its simplicity and applicability through an abstract examination of a newly built case study. Finally, the summarised outcomes of other extensive studies on societal preferences also confirm the feasibility of the hypothesis (i.e., the healthy materialisation) also from a social perspective.

Confocal spectral microscopy, a non-destructive approach to follow contamination and biofilm formation of mCherry Staphylococcus aureus on solid surfaces

Methods to test the safety of wood material for hygienically sensitive places are indirect, destructive and limited to incomplete microbial recovery via swabbing, brushing and elution-based techniques. Therefore, we chose mCherry Staphylococcus aureus as a model bacterium for solid and porous surface contamination. Confocal spectral laser microscope (CSLM) was employed to characterize and use the autofluorescence of Sessile oak (Quercus petraea), Douglas fir (Pseudotsuga menziesii) and poplar (Populus euramericana alba L.) wood discs cut into transversal (RT) and tangential (LT) planes. The red fluorescent area occupied by bacteria was differentiated from that of wood, which represented the bacterial quantification, survival and bio-distribution on surfaces from one hour to one week after inoculation. More bacteria were present near the surface on LT face wood as compared to RT and they persisted throughout the study period. Furthermore, this innovative methodology identified that S. aureus formed a dense biofilm on melamine but not on oak wood in similar inoculation and growth conditions. Conclusively, the endogenous fluorescence of materials and the model bacterium permitted direct quantification of surface contamination by using CSLM and it is a promising tool for hygienic safety evaluation.

Reusable Plastic Crates (RPCs) for Fresh Produce (Case Study on Cauliflowers): Sustainable Packaging but Potential Salmonella Survival and Risk of Cross-Contamination

The handling of fresh fruits and vegetables in reusable plastic crates (RPCs) has the potential to increase the sustainability of packaging in the fresh produce supply chain. However, the utilization of multiple-use containers can have consequences related to the microbial safety of this type of food. The present study assessed the potential cross-contamination of fresh cauliflowers with Salmonella enterica via different contact materials (polypropylene from RPCs, corrugated cardboard, and medium-density fiberboard (MDF) from wooden boxes). Additionally, the survival of the pathogenic microorganism was studied in cauliflowers and the contact materials during storage. The life cycle assessment (LCA) approach was used to evaluate the environmental impact of produce handling containers made from the different food-contact materials tested. The results show a higher risk of cross-contamination via polypropylene compared with cardboard and MDF. Another outcome of the study is the potential of Salmonella for surviving both in cross-contaminated produce and in contact materials under supply chain conditions. Regarding environmental sustainability, RPCs have a lower environmental impact than single-use containers (cardboard and wooden boxes). To exploit the potential environmental benefits of RPCs while ensuring food safety, it is necessary to guarantee the hygiene of this type of container.

Persistence of Pathogens on Inanimate Surfaces: A Narrative Review

For the prevention of infectious diseases, knowledge about transmission routes is essential. In addition to respiratory, fecal-oral, and sexual transmission, the transfer of pathogens via surfaces plays a vital role for human pathogenic infections-especially nosocomial pathogens. Therefore, information about the survival of pathogens on surfaces can have direct implications on clinical measures, including hygiene guidelines and disinfection strategies. In this review, we reviewed the existing literature regarding viral, bacterial, and fungal persistence on inanimate surfaces. In particular, the current knowledge of the survival time and conditions of clinically relevant pathogens is summarized. While many pathogens persist only for hours, common nosocomial pathogens can survive for days to weeks under laboratory conditions and thereby potentially form a continuous source of transmission if no adequate inactivation procedures are performed.

Comparative study of microbiological transfer from four materials used in direct contact with apples

Several materials such as plastic, wood, cardboard or stainless steel are used as working surfaces or packaging in direct contact with foodstuffs. In food industries, the hygienic surface status is one of the criteria to product conform packaging as described in the European regulation ECR 1935/2004. Today in European Union, it exists one harmonized regulation specific for Food Contact material made of plastic called EU N°10/2011 (Anonymous 2011a). This regulation specifies that materials intended for safe foodstuff contact must not modify food characteristics in terms of chemical, microbiological and sensorial properties. This study aims to compare the survival and transfer of Penicillium expansum conidia and Escherichia coli cells from several materials to apples. Poplar, cardboards, newly manufactured plastic and reusable plastic specimens were artificially inoculated with both microorganisms, subsequently put in contact with apples and stored under realistic storage conditions. After incubation for up to 1 week, apples and specimens were analysed to assess the survival of the microorganisms and their transfer from materials to apples. While P. expansum survived and did not grow on any of the materials, E. coli mortality was observed after 1 h on wood and cardboard and after 1 week on both plastics. The proportion of microorganisms transferred was different according to the considered material. This transfer was lower than 1% for wood.

Fate of Listeria monocytogenes in the Presence of Resident Cheese Microbiota on Common Packaging Materials

Literature data regarding the survival of microorganisms on materials used for food package purposes are scarce. The aim of the current study is to assess the survival of Listeria monocytogenes on different packaging materials for dairy products during extended storage at different temperatures. Three packaging materials (5 × 5 cm) were contaminated with a cocktail of five strains of Listeria monocytogenes suspended in a cheese homogenate, including the cheese's native microbial population. Contaminated samples were incubated at 37°, 12°, and 4°C and periodically analyzed up to 56 days. The evolution of the total viable count and pathogen population was evaluated. At 37°C, the results showed that Listeria monocytogenes was no longer detected on polyethylene-coated nylon (B) by day 4 and on polyethylene-coated parchment (A) and greaseproof paper (C) by day 7. Interestingly, the initial cell population (ranging between 2.5 and 2.7 log CFU/cm2) of Listeria monocytogenes increased to 3 log CFU/cm2 within 4 days of storage at 12°C on A and C. During storage, the number remained fairly constant at 12°C and 4°C on two materials (A-C) and decreased slowly on the third one (B). This study shows that survival of Listeria monocytogenes on packaging materials for dairy products will be higher when stored at 4 or 12°C compared to 37°C. The survival of Listeria monocytogenes on the packaging materials raises concerns of cross-contamination during food handling and preparation at catering and retail premises and within the home, highlighting the importance of treating the packaging materials as a potential source of cross-contamination. These initial findings may aid in quantifying risks associated with contamination of food packaging materials.

Testing the Antimicrobial Characteristics of Wood Materials: A Review of Methods

Some wood species have antimicrobial properties, making them a better choice over inert surfaces in certain circumstances. However, the organic and porous nature of wood raises questions regarding the use of this material in hygienically important places. Therefore, it is reasonable to investigate the microbial survival and the antimicrobial potential of wood via a variety of methods. Based on the available literature, this review classifies previously used methods into two broad categories: one category tests wood material by direct bacterial contact, and the other tests the action of molecules previously extracted from wood on bacteria and fungi. This article discusses the suitability of these methods to wood materials and exposes knowledge gaps that can be used to guide future research. This information is intended to help the researchers and field experts to select suitable methods for testing the hygienic safety and antimicrobial properties of wood materials.

Survival of Spoilage and Pathogenic Microorganisms on Cardboard and Plastic Packaging Materials

The aim of this work was to study the interaction of corrugated and plastic materials with pathogenic and spoiling microorganisms frequently associated to fresh produce. The effect of the two packaging materials on the survival during the storage of microorganisms belonging to the species Escherichia coli, Listeria monocytogenes, Salmonella enteritidis, Saccharomyces cerevisiae, Lactobacillus plantarum, Pseudomonas fluorescens, and Aspergillus flavus was studied through traditional plate counting and scanning electron microscopy (SEM). The results obtained showed that cardboard materials, if correctly stored, reduced the potential of packaging to cross-contaminate food due to a faster viability loss by spoilage and pathogenic microorganisms compared to the plastic ones. In fact, the cell loads of the pathogenic species considered decreased over time independently on the inoculation level and packaging material used. However, the superficial viability losses were significantly faster in cardboard compared to plastic materials. The same behavior was observed for the spoilage microorganisms considered. The SEM microphotographs indicate that the reduction of superficial contamination on cardboard surfaces was due to the entrapping of the microbial cells within the fibers and the pores of this material. In addition, SEM data showed that the entrapped cells were subjected to more or less rapid lyses, depending on the species, due to the absence of water and nutrients, with the exception of molds. The latter spoilers were able to proliferate inside the cardboard fibers only when the absorption of water was not prevented during the storage. In conclusion, the findings of this work showed the reduction of cross-contamination potential of corrugated compared to plastic packaging materials used in fruit and vegetable sector. However, the findings outlined the importance of hygiene and low humidity during cardboard storage to prevent the mold growth on packaging.